diff options
Diffstat (limited to 'keyboards/tkc')
46 files changed, 163 insertions, 577 deletions
diff --git a/keyboards/tkc/california/config.h b/keyboards/tkc/california/config.h index 3f8d4b58e7..b471ce3008 100644 --- a/keyboards/tkc/california/config.h +++ b/keyboards/tkc/california/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 12 @@ -41,10 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 #define BACKLIGHT_PIN B7 #ifdef BACKLIGHT_PIN #define BACKLIGHT_BREATHING @@ -53,45 +48,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LED_NUM_LOCK_PIN F1 #define LED_CAPS_LOCK_PIN F0 -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -107,7 +68,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/tkc/california/info.json b/keyboards/tkc/california/info.json index b673e5d30d..7cce73d271 100644 --- a/keyboards/tkc/california/info.json +++ b/keyboards/tkc/california/info.json @@ -8,6 +8,8 @@ "pid": "0x0009", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.5, "y":0}, {"label":"Home", "x":17, "y":0}, {"label":"End", "x":18, "y":0}, {"label":"Scroll Lock", "x":19, "y":0}, {"label":"Pause", "x":20, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Bksp", "x":13, "y":1.5}, {"x":14, "y":1.5}, {"label":"PgUp", "x":15.5, "y":1.5}, {"label":"Num Lock", "x":17, "y":1.5}, {"label":"/", "x":18, "y":1.5}, {"label":"*", "x":19, "y":1.5}, {"label":"-", "x":20, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"PgDn", "x":15.5, "y":2.5}, {"label":"7", "x":17, "y":2.5}, {"label":"8", "x":18, "y":2.5}, {"label":"9", "x":19, "y":2.5}, {"label":"+", "x":20, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":17, "y":3.5}, {"label":"5", "x":18, "y":3.5}, {"label":"6", "x":19, "y":3.5}, {"x":20, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"\u2191", "x":15.5, "y":4.75}, {"label":"1", "x":17, "y":4.5}, {"label":"2", "x":18, "y":4.5}, {"label":"3", "x":19, "y":4.5}, {"label":"Enter", "x":20, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Menu", "x":11.25, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":12.5, "y":5.5, "w":1.25}, {"label":"\u2190", "x":14.5, "y":5.75}, {"label":"\u2193", "x":15.5, "y":5.75}, {"label":"\u2192", "x":16.5, "y":5.75}, {"label":"0", "x":18, "y":5.5}, {"label":".", "x":19, "y":5.5}, {"x":20, "y":5.5}] diff --git a/keyboards/tkc/california/rules.mk b/keyboards/tkc/california/rules.mk index 1c4073c9ce..b325f3f0c7 100644 --- a/keyboards/tkc/california/rules.mk +++ b/keyboards/tkc/california/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/tkc/candybar/lefty/config.h b/keyboards/tkc/candybar/lefty/config.h index 8762bdf515..52242d23c0 100644 --- a/keyboards/tkc/candybar/lefty/config.h +++ b/keyboards/tkc/candybar/lefty/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -25,36 +24,6 @@ #define MATRIX_ROW_PINS { A8, A9, A10, A13 } #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, B2, B10, B11, B12, B13, B14, B15 } - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/tkc/candybar/lefty/info.json b/keyboards/tkc/candybar/lefty/info.json index c902c78cee..53ed1e97dc 100644 --- a/keyboards/tkc/candybar/lefty/info.json +++ b/keyboards/tkc/candybar/lefty/info.json @@ -8,6 +8,8 @@ "pid": "0x0003", "device_version": "0.0.6" }, + "processor": "STM32F072", + "bootloader": "stm32-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/tkc/candybar/lefty/rules.mk b/keyboards/tkc/candybar/lefty/rules.mk index 52cb35c5a2..36101d2f8e 100644 --- a/keyboards/tkc/candybar/lefty/rules.mk +++ b/keyboards/tkc/candybar/lefty/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = STM32F072 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/tkc/candybar/lefty_r3/config.h b/keyboards/tkc/candybar/lefty_r3/config.h index ccf635a7ce..7b400e12da 100644 --- a/keyboards/tkc/candybar/lefty_r3/config.h +++ b/keyboards/tkc/candybar/lefty_r3/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -25,36 +24,6 @@ #define MATRIX_ROW_PINS { F1, F0, D0, D2 } #define MATRIX_COL_PINS { B5, B6, C6, C7, F7, F6, F5, F4, D5, B3, B0, B1, B2, D4, D6, D7, B4 } - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/tkc/candybar/lefty_r3/info.json b/keyboards/tkc/candybar/lefty_r3/info.json index c902c78cee..a6e14261aa 100644 --- a/keyboards/tkc/candybar/lefty_r3/info.json +++ b/keyboards/tkc/candybar/lefty_r3/info.json @@ -8,6 +8,8 @@ "pid": "0x0003", "device_version": "0.0.6" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/tkc/candybar/lefty_r3/keymaps/default/keymap.c b/keyboards/tkc/candybar/lefty_r3/keymaps/default/keymap.c index 24ed684f8e..149d1e3f0a 100644 --- a/keyboards/tkc/candybar/lefty_r3/keymaps/default/keymap.c +++ b/keyboards/tkc/candybar/lefty_r3/keymaps/default/keymap.c @@ -25,16 +25,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: Base Layer (Default Layer) */ [_BL] = LAYOUT( - KC_P7 , KC_P8, KC_P9 , KC_PAST, KC_ESC , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_O , KC_P , KC_DEL , KC_BSPC , \ - KC_P4 , KC_P5, KC_P6 , KC_PMNS, KC_TAB , KC_A , KC_S , KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_SCLN, KC_ENT , \ - KC_P1 , KC_P2, KC_P3 , KC_PPLS, KC_LSFT, KC_Z , KC_X, KC_C , KC_V , KC_B, KC_N , KC_M , KC_COMM, KC_DOT , KC_UP ,KC_RSFT , \ + KC_P7 , KC_P8, KC_P9 , KC_PAST, KC_ESC , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_O , KC_P , KC_DEL , KC_BSPC , + KC_P4 , KC_P5, KC_P6 , KC_PMNS, KC_TAB , KC_A , KC_S , KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_SCLN, KC_ENT , + KC_P1 , KC_P2, KC_P3 , KC_PPLS, KC_LSFT, KC_Z , KC_X, KC_C , KC_V , KC_B, KC_N , KC_M , KC_COMM, KC_DOT , KC_UP ,KC_RSFT , MO(_FL), KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC , KC_BSPC, KC_APP , KC_LEFT, KC_DOWN, KC_RGHT), /* Keymap _FL: Function Layer */ [_FL] = LAYOUT( - KC_P7 , KC_P8, KC_P9 , KC_VOLU, QK_BOOT , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \ - KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SCRL, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , \ - KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NUM , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \ + KC_P7 , KC_P8, KC_P9 , KC_VOLU, QK_BOOT , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , + KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SCRL, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , + KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NUM , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , KC_END, KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC , KC_BSPC, KC_APP , MO(_FL), KC_HOME, KC_PGDN), }; diff --git a/keyboards/tkc/candybar/lefty_r3/keymaps/via/keymap.c b/keyboards/tkc/candybar/lefty_r3/keymaps/via/keymap.c index 70aca6eced..8e8f02aee6 100644 --- a/keyboards/tkc/candybar/lefty_r3/keymaps/via/keymap.c +++ b/keyboards/tkc/candybar/lefty_r3/keymaps/via/keymap.c @@ -27,28 +27,28 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: Base Layer (Default Layer) */ [_BL] = LAYOUT( - KC_P7 , KC_P8, KC_P9 , KC_PAST, KC_ESC , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_O , KC_P , KC_DEL , KC_BSPC , \ - KC_P4 , KC_P5, KC_P6 , KC_PMNS, KC_TAB , KC_A , KC_S , KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_SCLN, KC_ENT , \ - KC_P1 , KC_P2, KC_P3 , KC_PPLS, KC_LSFT, KC_Z , KC_X, KC_C , KC_V , KC_B, KC_N , KC_M , KC_COMM, KC_DOT , KC_UP ,KC_RSFT , \ + KC_P7 , KC_P8, KC_P9 , KC_PAST, KC_ESC , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_O , KC_P , KC_DEL , KC_BSPC , + KC_P4 , KC_P5, KC_P6 , KC_PMNS, KC_TAB , KC_A , KC_S , KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_SCLN, KC_ENT , + KC_P1 , KC_P2, KC_P3 , KC_PPLS, KC_LSFT, KC_Z , KC_X, KC_C , KC_V , KC_B, KC_N , KC_M , KC_COMM, KC_DOT , KC_UP ,KC_RSFT , MO(_FL), KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC , KC_BSPC, KC_APP , KC_LEFT, KC_DOWN, KC_RGHT), /* Keymap _FL: Function Layer */ [_FL] = LAYOUT( - KC_P7 , KC_P8, KC_P9 , KC_VOLU, QK_BOOT , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \ - KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SCRL, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , \ - KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NUM , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \ + KC_P7 , KC_P8, KC_P9 , KC_VOLU, QK_BOOT , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , + KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SCRL, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , + KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NUM , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , KC_END, KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC , KC_BSPC, KC_APP , MO(_FL), KC_HOME, KC_PGDN), [_AL] = LAYOUT( - KC_P7 , KC_P8, KC_P9 , KC_VOLU, QK_BOOT , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \ - KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SCRL, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , \ - KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NUM , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \ + KC_P7 , KC_P8, KC_P9 , KC_VOLU, QK_BOOT , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , + KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SCRL, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , + KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NUM , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , KC_END, KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC , KC_BSPC, KC_APP , MO(_FL), KC_HOME, KC_PGDN), [_LL] = LAYOUT( - KC_P7 , KC_P8, KC_P9 , KC_VOLU, QK_BOOT , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \ - KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SCRL, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , \ - KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NUM , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \ + KC_P7 , KC_P8, KC_P9 , KC_VOLU, QK_BOOT , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , + KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SCRL, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , + KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NUM , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , KC_END, KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC , KC_BSPC, KC_APP , MO(_FL), KC_HOME, KC_PGDN), }; diff --git a/keyboards/tkc/candybar/lefty_r3/rules.mk b/keyboards/tkc/candybar/lefty_r3/rules.mk index 5021259667..92e817504f 100644 --- a/keyboards/tkc/candybar/lefty_r3/rules.mk +++ b/keyboards/tkc/candybar/lefty_r3/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/tkc/candybar/righty/config.h b/keyboards/tkc/candybar/righty/config.h index 8762bdf515..52242d23c0 100644 --- a/keyboards/tkc/candybar/righty/config.h +++ b/keyboards/tkc/candybar/righty/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -25,36 +24,6 @@ #define MATRIX_ROW_PINS { A8, A9, A10, A13 } #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, B2, B10, B11, B12, B13, B14, B15 } - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/tkc/candybar/righty/info.json b/keyboards/tkc/candybar/righty/info.json index 4dde92d27f..e964fb2384 100644 --- a/keyboards/tkc/candybar/righty/info.json +++ b/keyboards/tkc/candybar/righty/info.json @@ -8,6 +8,8 @@ "pid": "0x0002", "device_version": "0.0.6" }, + "processor": "STM32F072", + "bootloader": "stm32-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/tkc/candybar/righty/rules.mk b/keyboards/tkc/candybar/righty/rules.mk index 52cb35c5a2..36101d2f8e 100644 --- a/keyboards/tkc/candybar/righty/rules.mk +++ b/keyboards/tkc/candybar/righty/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = STM32F072 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/tkc/candybar/righty_r3/config.h b/keyboards/tkc/candybar/righty_r3/config.h index fd922f0881..8ad22c2255 100644 --- a/keyboards/tkc/candybar/righty_r3/config.h +++ b/keyboards/tkc/candybar/righty_r3/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -25,36 +24,6 @@ #define MATRIX_ROW_PINS { F6, F7, D0, D2 } #define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, C6, C7, D5, B1, B3, B2, B0, F0, F1, F4, F5 } - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/tkc/candybar/righty_r3/info.json b/keyboards/tkc/candybar/righty_r3/info.json index 4dde92d27f..1a93578325 100644 --- a/keyboards/tkc/candybar/righty_r3/info.json +++ b/keyboards/tkc/candybar/righty_r3/info.json @@ -8,6 +8,8 @@ "pid": "0x0002", "device_version": "0.0.6" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/tkc/candybar/righty_r3/keymaps/default/keymap.c b/keyboards/tkc/candybar/righty_r3/keymaps/default/keymap.c index 966f67ea90..6b257c1473 100644 --- a/keyboards/tkc/candybar/righty_r3/keymaps/default/keymap.c +++ b/keyboards/tkc/candybar/righty_r3/keymaps/default/keymap.c @@ -25,16 +25,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: Base Layer (Default Layer) */ [_BL] = LAYOUT( - KC_ESC,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_DEL,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_PAST, \ - KC_TAB,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_ENT,KC_P4,KC_P5,KC_P6,KC_PMNS, \ - KC_LSFT,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_RSFT,KC_UP,KC_P1,KC_P2,KC_P3,KC_PPLS, \ + KC_ESC,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_DEL,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_PAST, + KC_TAB,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_ENT,KC_P4,KC_P5,KC_P6,KC_PMNS, + KC_LSFT,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_RSFT,KC_UP,KC_P1,KC_P2,KC_P3,KC_PPLS, KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_LEFT,KC_DOWN,KC_RGHT,KC_P0,KC_PDOT,KC_PENT), /* Keymap _FL: Function Layer */ [_FL] = LAYOUT( - QK_BOOT,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_LBRC,KC_RBRC,KC_INS,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_VOLU, \ - KC_TAB,KC_A,KC_SCRL,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_QUOT,KC_BSLS,KC_P4,KC_P5,KC_P6,KC_VOLD, \ - KC_LSFT,KC_Z,KC_X,KC_CAPS,KC_V,KC_B,KC_NUM,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_PGUP,KC_P1,KC_P2,KC_P3,KC_PEQL, \ + QK_BOOT,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_LBRC,KC_RBRC,KC_INS,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_VOLU, + KC_TAB,KC_A,KC_SCRL,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_QUOT,KC_BSLS,KC_P4,KC_P5,KC_P6,KC_VOLD, + KC_LSFT,KC_Z,KC_X,KC_CAPS,KC_V,KC_B,KC_NUM,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_PGUP,KC_P1,KC_P2,KC_P3,KC_PEQL, KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_HOME,KC_PGDN,KC_END,KC_P0,KC_PDOT,KC_PENT), }; diff --git a/keyboards/tkc/candybar/righty_r3/keymaps/via/keymap.c b/keyboards/tkc/candybar/righty_r3/keymaps/via/keymap.c index c49d939196..ad0baf41ee 100644 --- a/keyboards/tkc/candybar/righty_r3/keymaps/via/keymap.c +++ b/keyboards/tkc/candybar/righty_r3/keymaps/via/keymap.c @@ -27,28 +27,28 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: Base Layer (Default Layer) */ [_BL] = LAYOUT( - KC_ESC,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_DEL,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_PAST, \ - KC_TAB,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_ENT,KC_P4,KC_P5,KC_P6,KC_PMNS, \ - KC_LSFT,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_RSFT,KC_UP,KC_P1,KC_P2,KC_P3,KC_PPLS, \ + KC_ESC,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_DEL,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_PAST, + KC_TAB,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_ENT,KC_P4,KC_P5,KC_P6,KC_PMNS, + KC_LSFT,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_RSFT,KC_UP,KC_P1,KC_P2,KC_P3,KC_PPLS, KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_LEFT,KC_DOWN,KC_RGHT,KC_P0,KC_PDOT,KC_PENT), /* Keymap _FL: Function Layer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}; diff --git a/keyboards/tkc/candybar/righty_r3/rules.mk b/keyboards/tkc/candybar/righty_r3/rules.mk index 5021259667..92e817504f 100644 --- a/keyboards/tkc/candybar/righty_r3/rules.mk +++ b/keyboards/tkc/candybar/righty_r3/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/tkc/godspeed75/config.h b/keyboards/tkc/godspeed75/config.h index 0b2f63c028..09043c1be2 100644 --- a/keyboards/tkc/godspeed75/config.h +++ b/keyboards/tkc/godspeed75/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 12 @@ -25,36 +24,6 @@ #define MATRIX_ROW_PINS { A3, A4, A5, A6, A7, B0, B1, B2, B10, B11, A9, A10 } #define MATRIX_COL_PINS { A0, A1, A2, B12, B13, B14, B15, A8 } - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/tkc/godspeed75/info.json b/keyboards/tkc/godspeed75/info.json index 6cffc225ac..f892202a39 100644 --- a/keyboards/tkc/godspeed75/info.json +++ b/keyboards/tkc/godspeed75/info.json @@ -8,6 +8,8 @@ "pid": "0x0006", "device_version": "0.0.1" }, + "processor": "STM32F072", + "bootloader": "stm32-dfu", "layouts": { "LAYOUT": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Scroll Lock", "x":14, "y":0}, {"label":"Pause", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"x":13, "y":1}, {"label":"BkSp", "x":14, "y":1}, {"label":"PgUp", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"PgDn", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Insert", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"Delete", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.5}, {"label":"Alt", "x":2.25, "y":5, "w":1.25}, {"x":3.5, "y":5, "w":6.25}, {"label":"MO(1)", "x":9.75, "y":5, "w":1.25}, {"label":"Ctrl", "x":11, "y":5, "w":1.25}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}] diff --git a/keyboards/tkc/godspeed75/rules.mk b/keyboards/tkc/godspeed75/rules.mk index 8728fe0a37..0f15f10b20 100644 --- a/keyboards/tkc/godspeed75/rules.mk +++ b/keyboards/tkc/godspeed75/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = STM32F072 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/tkc/m0lly/config.h b/keyboards/tkc/m0lly/config.h index 3f57b2089b..cc1c5ca08c 100644 --- a/keyboards/tkc/m0lly/config.h +++ b/keyboards/tkc/m0lly/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -74,12 +73,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -90,32 +83,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define QMK_LED D2 // NumLock on M0lly //#define QMK_SPEAKER C6 -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -131,7 +98,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/tkc/m0lly/info.json b/keyboards/tkc/m0lly/info.json index 4383bc04dd..d685fa1eee 100644 --- a/keyboards/tkc/m0lly/info.json +++ b/keyboards/tkc/m0lly/info.json @@ -8,6 +8,8 @@ "pid": "0x0004", "device_version": "0.0.1" }, + "processor": "at90usb1286", + "bootloader": "qmk-dfu", "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/tkc/m0lly/rules.mk b/keyboards/tkc/m0lly/rules.mk index 8f29a8ea51..f07afe6ed4 100644 --- a/keyboards/tkc/m0lly/rules.mk +++ b/keyboards/tkc/m0lly/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = qmk-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/tkc/osav2/config.h b/keyboards/tkc/osav2/config.h index d8c6bc8e2e..f6b55416d0 100644 --- a/keyboards/tkc/osav2/config.h +++ b/keyboards/tkc/osav2/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 10 @@ -39,11 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - #define BACKLIGHT_PIN D6 #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 @@ -74,45 +68,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -128,7 +83,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/tkc/osav2/info.json b/keyboards/tkc/osav2/info.json index b5fea85c99..d718a790c4 100644 --- a/keyboards/tkc/osav2/info.json +++ b/keyboards/tkc/osav2/info.json @@ -8,6 +8,9 @@ "pid": "0x0005", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "community_layouts": ["alice", "alice_split_bs"], "layouts": { "LAYOUT_default_ansi": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"~", "x":1.25, "y":0}, {"label":"!", "x":2.25, "y":0}, {"label":"@", "x":3.25, "y":0}, {"label":"#", "x":4.25, "y":0}, {"label":"$", "x":5.25, "y":0}, {"label":"%", "x":6.25, "y":0}, {"label":"^", "x":7.25, "y":0}, {"label":"&", "x":10.25, "y":0}, {"label":"*", "x":11.25, "y":0}, {"label":"(", "x":12.25, "y":0}, {"label":")", "x":13.25, "y":0}, {"label":"_", "x":14.25, "y":0}, {"label":"+", "x":15.25, "y":0}, {"label":"Backspace", "x":16.25, "y":0, "w":2}, {"label":"Page Up", "x":0, "y":1}, {"label":"Tab", "x":1.25, "y":1, "w":1.5}, {"label":"Q", "x":2.75, "y":1}, {"label":"W", "x":3.75, "y":1}, {"label":"E", "x":4.75, "y":1}, {"label":"R", "x":5.75, "y":1}, {"label":"T", "x":6.75, "y":1}, {"label":"Y", "x":9.75, "y":1}, {"label":"U", "x":10.75, "y":1}, {"label":"I", "x":11.75, "y":1}, {"label":"O", "x":12.75, "y":1}, {"label":"P", "x":13.75, "y":1}, {"label":"{", "x":14.75, "y":1}, {"label":"}", "x":15.75, "y":1}, {"label":"|", "x":16.75, "y":1, "w":1.5}, {"label":"Page Down", "x":0, "y":2}, {"label":"Caps Lock", "x":1.25, "y":2, "w":1.75}, {"label":"A", "x":3, "y":2}, {"label":"S", "x":4, "y":2}, {"label":"D", "x":5, "y":2}, {"label":"F", "x":6, "y":2}, {"label":"G", "x":7, "y":2}, {"label":"H", "x":10, "y":2}, {"label":"J", "x":11, "y":2}, {"label":"K", "x":12, "y":2}, {"label":"L", "x":13, "y":2}, {"label":":", "x":14, "y":2}, {"label":"\"", "x":15, "y":2}, {"label":"Enter", "x":16, "y":2, "w":2.25}, {"label":"Shift", "x":1.25, "y":3, "w":2.25}, {"label":"Z", "x":3.5, "y":3}, {"label":"X", "x":4.5, "y":3}, {"label":"C", "x":5.5, "y":3}, {"label":"V", "x":6.5, "y":3}, {"label":"B", "x":7.5, "y":3}, {"label":"B", "x":9.5, "y":3}, {"label":"N", "x":10.5, "y":3}, {"label":"M", "x":11.5, "y":3}, {"label":"<", "x":12.5, "y":3}, {"label":">", "x":13.5, "y":3}, {"label":"?", "x":14.5, "y":3}, {"label":"Shift", "x":15.5, "y":3, "w":2.75}, {"label":"Ctrl", "x":1.25, "y":4, "w":1.5}, {"label":"Win", "x":4.25, "y":4, "w":1.5}, {"x":5.75, "y":4, "w":2.25}, {"label":"Fn", "x":8, "y":4}, {"x":9.5, "y":4, "w":2.75}, {"label":"Alt", "x":12.25, "y":4, "w":1.5}, {"label":"Ctrl", "x":16.75, "y":4, "w":1.5}] diff --git a/keyboards/tkc/osav2/keymaps/brandonschlack/keymap.c b/keyboards/tkc/osav2/keymaps/brandonschlack/keymap.c index c2889c5bbe..4e4d890d06 100755 --- a/keyboards/tkc/osav2/keymaps/brandonschlack/keymap.c +++ b/keyboards/tkc/osav2/keymaps/brandonschlack/keymap.c @@ -47,12 +47,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * │Opt │ │Cmd │Spc/Lwr│Ctrl│ │ Spc/Rai│ Cmd│ │ Opt│ * └─────┘ └─────┴───────┴────┘ └──────────┴─────┘ └─────┘ */ -[_BASE] = LAYOUT_all( \ - KC_MPLY, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ - KC_VOLU, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ - KC_VOLD, HY_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, LOWER, \ - KC_LOPT, KC_LCMD, SPC_LWR, KC_LCTL, SPC_RAI, KC_RCMD, KC_ROPT \ +[_BASE] = LAYOUT_all( + KC_MPLY, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, + KC_VOLU, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_VOLD, HY_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, LOWER, + KC_LOPT, KC_LCMD, SPC_LWR, KC_LCTL, SPC_RAI, KC_RCMD, KC_ROPT ), /* Reeder * ┌───┐ ┌───┬───┬───┬───┬───┬───┬───┐ ┌───┬───┬───┬───┬───┬───┬───┬───┐ @@ -67,12 +67,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * │ │ │ │ │ │ │ │ │ │ │ * └─────┘ └─────┴───────┴────┘ └──────────┴─────┘ └─────┘ */ -[_REEDER] = LAYOUT_all( \ - KC_H, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - KC_K, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - KC_J, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______ \ +[_REEDER] = LAYOUT_all( + KC_H, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_K, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_J, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ ), /* Mail @@ -88,12 +88,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * │ │ │ │ │ │ │ │ │ │ │ * └─────┘ └─────┴───────┴────┘ └──────────┴─────┘ └─────┘ */ -[_MAIL] = LAYOUT_all( \ - G(KC_BSPC), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - KC_DOWN, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______ \ +[_MAIL] = LAYOUT_all( + G(KC_BSPC), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_DOWN, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ ), /* Lower @@ -109,12 +109,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * │ │ │ │ │ │ │ │ │ │ │ * └─────┘ └─────┴───────┴────┘ └──────────┴─────┘ └─────┘ */ -[_LOWER] = LAYOUT_all( \ - KC_MUTE, QM_MAKE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, MC_LHPD, MC_SLPD, \ - KC_MNXT, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, _______, _______, _______, _______, _______, KC_PGUP, KC_HOME, KC_END, KC_DEL, \ - KC_MPRV, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, _______, _______, _______, KC_MPRV, KC_MNXT, KC_PGDN, KC_UP, KC_MPLY, \ - _______, RGB_LYR, RGB_THM, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, RGT_SFT, _______, \ - _______, _______, _______, _______, _______, _______, _______ \ +[_LOWER] = LAYOUT_all( + KC_MUTE, QM_MAKE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, MC_LHPD, MC_SLPD, + KC_MNXT, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, _______, _______, _______, _______, _______, KC_PGUP, KC_HOME, KC_END, KC_DEL, + KC_MPRV, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, _______, _______, _______, KC_MPRV, KC_MNXT, KC_PGDN, KC_UP, KC_MPLY, + _______, RGB_LYR, RGB_THM, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, RGT_SFT, _______, + _______, _______, _______, _______, _______, _______, _______ ), /* Reeder Function @@ -130,12 +130,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * │ │ │ │ │ │ │ │ │ │ │ * └─────┘ └─────┴───────┴────┘ └──────────┴─────┘ └─────┘ */ -[_REEDER_FN] = LAYOUT_all( \ - KC_L, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - KC_P, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - KC_N, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______ \ +[_REEDER_FN] = LAYOUT_all( + KC_L, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_P, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_N, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ ), /* Mail @@ -151,12 +151,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * │ │ │ │ │ │ │ │ │ │ │ * └─────┘ └─────┴───────┴────┘ └──────────┴─────┘ └─────┘ */ -[_MAIL_FN] = LAYOUT_all( \ - KC_BSPC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - A(G(KC_LBRC)), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - A(G(KC_RBRC)), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______ \ +[_MAIL_FN] = LAYOUT_all( + KC_BSPC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + A(G(KC_LBRC)), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + A(G(KC_RBRC)), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ ), /* Raise @@ -172,12 +172,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * │ │ │ │ │ │ │ │ │ │ │ * └─────┘ └─────┴───────┴────┘ └──────────┴─────┘ └─────┘ */ -[_RAISE] = LAYOUT_all( \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______ \ +[_RAISE] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ ), /* Adjust @@ -193,12 +193,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * │ │ │ │ │ │ │ │ │ │ │ * └─────┘ └─────┴───────┴────┘ └──────────┴─────┘ └─────┘ */ -[_ADJUST] = LAYOUT_all( \ - TG_BASE, QM_MAKE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - TG_REDR, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - TG_MAIL, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, RGB_LYR, RGB_THM, _______, EE_CLR, QK_BOOT, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______ \ +[_ADJUST] = LAYOUT_all( + TG_BASE, QM_MAKE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + TG_REDR, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, _______, _______, _______, _______, _______, _______, _______, _______, _______, + TG_MAIL, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_LYR, RGB_THM, _______, EE_CLR, QK_BOOT, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ ) /* Layout @@ -215,12 +215,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * └─────┘ └─────┴───────┴────┘ └──────────┴─────┘ └─────┘ */ /* -[_BLANK] = LAYOUT( \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______ \ +[_BLANK] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ ) */ diff --git a/keyboards/tkc/osav2/rules.mk b/keyboards/tkc/osav2/rules.mk index 5409e92b66..e98264035d 100644 --- a/keyboards/tkc/osav2/rules.mk +++ b/keyboards/tkc/osav2/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -17,5 +11,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes # Reduces compile size - -LAYOUTS = alice alice_split_bs diff --git a/keyboards/tkc/portico/config.h b/keyboards/tkc/portico/config.h index 3268b3511b..302744fa55 100644 --- a/keyboards/tkc/portico/config.h +++ b/keyboards/tkc/portico/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -32,7 +31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_LED_PROCESS_LIMIT 4 # define RGB_MATRIX_LED_FLUSH_LIMIT 26 -# define DEBOUNCE 3 # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES # undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN diff --git a/keyboards/tkc/portico/info.json b/keyboards/tkc/portico/info.json index d87ebe56b7..6fd68e21ea 100644 --- a/keyboards/tkc/portico/info.json +++ b/keyboards/tkc/portico/info.json @@ -8,9 +8,13 @@ "pid": "0x0008", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "debounce": 3, "layout_aliases": { "LAYOUT_all": "LAYOUT_65_ansi_blocker" }, + "community_layouts": ["65_ansi_blocker"], "layouts": { "LAYOUT_65_ansi_blocker": { "layout": [ diff --git a/keyboards/tkc/portico/rules.mk b/keyboards/tkc/portico/rules.mk index c98c9595bf..278b7fd572 100644 --- a/keyboards/tkc/portico/rules.mk +++ b/keyboards/tkc/portico/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -27,5 +21,3 @@ SRC += keyboards/wilba_tech/wt_main.c \ drivers/led/issi/is31fl3731.c QUANTUM_LIB_SRC += i2c_master.c - -LAYOUTS = 65_ansi_blocker diff --git a/keyboards/tkc/portico68v2/config.h b/keyboards/tkc/portico68v2/config.h index 4b6d5a2ef6..5e7c33f94c 100644 --- a/keyboards/tkc/portico68v2/config.h +++ b/keyboards/tkc/portico68v2/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -29,9 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 3 - #define DRIVER_ADDR_1 0b0110000 #define DRIVER_COUNT 1 #define DRIVER_1_LED_TOTAL 82 diff --git a/keyboards/tkc/portico68v2/info.json b/keyboards/tkc/portico68v2/info.json index c75fb31679..844a727864 100644 --- a/keyboards/tkc/portico68v2/info.json +++ b/keyboards/tkc/portico68v2/info.json @@ -8,6 +8,9 @@ "pid": "0x0012", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "debounce": 3, "layouts": { "LAYOUT_65_ansi_blocker": { "layout": [ diff --git a/keyboards/tkc/portico68v2/rules.mk b/keyboards/tkc/portico68v2/rules.mk index f8e7ced981..c96ee7d13a 100644 --- a/keyboards/tkc/portico68v2/rules.mk +++ b/keyboards/tkc/portico68v2/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/tkc/portico75/config.h b/keyboards/tkc/portico75/config.h index 57089653e1..3678dcc98d 100644 --- a/keyboards/tkc/portico75/config.h +++ b/keyboards/tkc/portico75/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -43,7 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_LED_PROCESS_LIMIT 4 # define RGB_MATRIX_LED_FLUSH_LIMIT 26 -# define DEBOUNCE 3 # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/tkc/portico75/info.json b/keyboards/tkc/portico75/info.json index ba2db69969..c84a742761 100644 --- a/keyboards/tkc/portico75/info.json +++ b/keyboards/tkc/portico75/info.json @@ -8,6 +8,9 @@ "pid": "0x0011", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "debounce": 3, "layouts": { "LAYOUT_75_ansi": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Mute", "x":15, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Home", "x":15, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"PgUp", "x":15, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, {"label":"<i class='kb kb-Arrows-Up'></i>", "x":14.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Fn", "x":10, "y":5.25, "w":1.5}, {"label":"Ctrl", "x":11.5, "y":5.25, "w":1.5}, {"label":"<i class='kb kb-Arrows-Left'></i>", "x":13.25, "y":5.5}, {"label":"<i class='kb kb-Arrows-Down'></i>", "x":14.25, "y":5.5}, {"label":"<i class='kb kb-Arrows-Right'></i>", "x":15.25, "y":5.5}] diff --git a/keyboards/tkc/portico75/rules.mk b/keyboards/tkc/portico75/rules.mk index e8a74c9026..cdc33f0c09 100644 --- a/keyboards/tkc/portico75/rules.mk +++ b/keyboards/tkc/portico75/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/tkc/tkc1800/config.h b/keyboards/tkc/tkc1800/config.h index f76c87ec3e..5c93a36227 100644 --- a/keyboards/tkc/tkc1800/config.h +++ b/keyboards/tkc/tkc1800/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 7 @@ -60,12 +59,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_SAT_STEP 10 #define RGBLIGHT_VAL_STEP 10 -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -77,27 +70,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define QMK_SPEAKER C6 /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/tkc/tkc1800/info.json b/keyboards/tkc/tkc1800/info.json index 4d1de2e2f1..39d55cc2ce 100644 --- a/keyboards/tkc/tkc1800/info.json +++ b/keyboards/tkc/tkc1800/info.json @@ -8,6 +8,8 @@ "pid": "0x0001", "device_version": "0.0.3" }, + "processor": "at90usb1286", + "bootloader": "qmk-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/tkc/tkc1800/keymaps/smt/keymap.c b/keyboards/tkc/tkc1800/keymaps/smt/keymap.c index f000ba172e..76a262bcf5 100644 --- a/keyboards/tkc/tkc1800/keymaps/smt/keymap.c +++ b/keyboards/tkc/tkc1800/keymaps/smt/keymap.c @@ -49,13 +49,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `---------------------------------------------------------------------------------' */ [QWERTY] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, \ - KC_DEL, KC_END, KC_PGDN, KC_SCRL, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_NUM, KC_PSLS, KC_PAST, KC_PAUS, \ - HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_P7, KC_P8, KC_P9, KC_PMNS, \ - CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, KC_UP, KC_P1, KC_P2, KC_P3, XXXXXXX, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(FUNCTION), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT \ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, + KC_DEL, KC_END, KC_PGDN, KC_SCRL, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_NUM, KC_PSLS, KC_PAST, KC_PAUS, + HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_P7, KC_P8, KC_P9, KC_PMNS, + CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, KC_UP, KC_P1, KC_P2, KC_P3, XXXXXXX, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(FUNCTION), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT ), /* Keymap COLEMAK: (Colemak Layer) Default Layer * ,-------------------------------------------------------. ,-------------------. @@ -75,13 +75,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `---------------------------------------------------------------------------------' */ [COLEMAK] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, \ - KC_DEL, KC_END, KC_PGDN, KC_SCRL, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_NUM, KC_PSLS, KC_PAST, KC_PAUS, \ - HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSPC, KC_P7, KC_P8, KC_P9, KC_PMNS, \ - CTL_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, XXXXXXX, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, KC_UP, KC_P1, KC_P2, KC_P3, XXXXXXX, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(FUNCTION), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT \ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, + KC_DEL, KC_END, KC_PGDN, KC_SCRL, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_NUM, KC_PSLS, KC_PAST, KC_PAUS, + HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSPC, KC_P7, KC_P8, KC_P9, KC_PMNS, + CTL_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, XXXXXXX, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, KC_UP, KC_P1, KC_P2, KC_P3, XXXXXXX, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(FUNCTION), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT ), /* Keymap DVORAK: (Dvorak Layer) Default Layer * ,-------------------------------------------------------. ,-------------------. @@ -101,22 +101,22 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `---------------------------------------------------------------------------------' */ [DVORAK] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, \ - KC_DEL, KC_END, KC_PGDN, KC_SCRL, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSLS, KC_GRV, KC_NUM, KC_PSLS, KC_PAST, KC_PAUS, \ - HPR_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSPC, KC_P7, KC_P8, KC_P9, KC_PMNS, \ - CTL_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, XXXXXXX, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_LSFT, XXXXXXX, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT, KC_UP, KC_P1, KC_P2, KC_P3, XXXXXXX, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(FUNCTION), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT \ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, + KC_DEL, KC_END, KC_PGDN, KC_SCRL, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSLS, KC_GRV, KC_NUM, KC_PSLS, KC_PAST, KC_PAUS, + HPR_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSPC, KC_P7, KC_P8, KC_P9, KC_PMNS, + CTL_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, XXXXXXX, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, XXXXXXX, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT, KC_UP, KC_P1, KC_P2, KC_P3, XXXXXXX, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(FUNCTION), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT ), [FUNCTION] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, \ - KC_DEL, KC_END, KC_PGDN, KC_SCRL, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, KC_NUM, KC_PSLS, KC_PAST, KC_PAUS, \ - _______, _______, _______, _______, _______, _______, _______, QWERTY, COLEMAK, DVORAK, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PMNS, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, KC_P4, KC_P5, KC_P6, KC_PPLS, \ - _______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______, KC_UP, KC_P1, KC_P2, KC_P3, XXXXXXX, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, _______, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, + KC_DEL, KC_END, KC_PGDN, KC_SCRL, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, KC_NUM, KC_PSLS, KC_PAST, KC_PAUS, + _______, _______, _______, _______, _______, _______, _______, QWERTY, COLEMAK, DVORAK, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PMNS, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, KC_P4, KC_P5, KC_P6, KC_PPLS, + _______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_STEP, _______, _______, KC_UP, KC_P1, KC_P2, KC_P3, XXXXXXX, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, _______, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT ), }; diff --git a/keyboards/tkc/tkc1800/keymaps/yanfali/keymap.c b/keyboards/tkc/tkc1800/keymaps/yanfali/keymap.c index 7006bda071..df8f2b9caf 100644 --- a/keyboards/tkc/tkc1800/keymaps/yanfali/keymap.c +++ b/keyboards/tkc/tkc1800/keymaps/yanfali/keymap.c @@ -42,22 +42,22 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `---------------------------------------------------------------------------------' */ [BASE] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, \ - KC_DEL, KC_END, KC_PGDN, KC_SCRL, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, XXXXXXX, KC_NUM, KC_PSLS, KC_PAST, KC_PAUS, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, \ - LCTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, XXXXXXX, \ - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, MO(FUNCTION), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT \ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, KC_PSCR, + KC_DEL, KC_END, KC_PGDN, KC_SCRL, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, XXXXXXX, KC_NUM, KC_PSLS, KC_PAST, KC_PAUS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, + LCTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, XXXXXXX, + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, MO(FUNCTION), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT ), [FUNCTION] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, XXXXXXX, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______, _______, _______, \ - _______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT, XXXXXXX, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______, _______, _______, + _______, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; diff --git a/keyboards/tkc/tkc1800/rules.mk b/keyboards/tkc/tkc1800/rules.mk index cf95bbd4b2..f9f3b206d0 100644 --- a/keyboards/tkc/tkc1800/rules.mk +++ b/keyboards/tkc/tkc1800/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = qmk-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/tkc/tkl_ab87/config.h b/keyboards/tkc/tkl_ab87/config.h index b8c603c043..35e4748c43 100644 --- a/keyboards/tkc/tkl_ab87/config.h +++ b/keyboards/tkc/tkl_ab87/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -41,10 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 #define BACKLIGHT_PIN B7 #ifdef BACKLIGHT_PIN #define BACKLIGHT_BREATHING @@ -79,45 +74,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LED_SCROLL_LOCK_PIN F0 #define LED_CAPS_LOCK_PIN F1 -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -133,7 +94,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/tkc/tkl_ab87/info.json b/keyboards/tkc/tkl_ab87/info.json index d7b6b8f070..e14b8c02ec 100644 --- a/keyboards/tkc/tkl_ab87/info.json +++ b/keyboards/tkc/tkl_ab87/info.json @@ -8,6 +8,8 @@ "pid": "0x0007", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/tkc/tkl_ab87/rules.mk b/keyboards/tkc/tkl_ab87/rules.mk index 63a57dcadb..4537738380 100644 --- a/keyboards/tkc/tkl_ab87/rules.mk +++ b/keyboards/tkc/tkl_ab87/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # |