diff options
Diffstat (limited to 'keyboards/takashicompany')
25 files changed, 16 insertions, 397 deletions
diff --git a/keyboards/takashicompany/center_enter/config.h b/keyboards/takashicompany/center_enter/config.h index aa675c32ad..d82b064cc7 100644 --- a/keyboards/takashicompany/center_enter/config.h +++ b/keyboards/takashicompany/center_enter/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 3 @@ -43,21 +42,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define ENCODERS_PAD_A { D2 } #define ENCODERS_PAD_B { D1 } -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - //#define LED_NUM_LOCK_PIN B0 //#define LED_CAPS_LOCK_PIN B1 //#define LED_SCROLL_LOCK_PIN B2 //#define LED_COMPOSE_PIN B3 //#define LED_KANA_PIN B4 -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN # define RGBLED_NUM 6 @@ -83,43 +73,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -135,7 +93,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/takashicompany/center_enter/info.json b/keyboards/takashicompany/center_enter/info.json index c9ecdb67ec..edc871c317 100644 --- a/keyboards/takashicompany/center_enter/info.json +++ b/keyboards/takashicompany/center_enter/info.json @@ -8,6 +8,8 @@ "pid": "0x0012", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/takashicompany/center_enter/rules.mk b/keyboards/takashicompany/center_enter/rules.mk index 43d5350abb..916e9f9934 100644 --- a/keyboards/takashicompany/center_enter/rules.mk +++ b/keyboards/takashicompany/center_enter/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/takashicompany/compacx/config.h b/keyboards/takashicompany/compacx/config.h index 10c70e472b..b331150f6a 100644 --- a/keyboards/takashicompany/compacx/config.h +++ b/keyboards/takashicompany/compacx/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 * 2 @@ -54,10 +53,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define LED_COMPOSE_PIN B3 //#define LED_KANA_PIN B4 -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN # define RGBLED_NUM 12 @@ -79,43 +74,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_TWINKLE #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -131,7 +94,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/takashicompany/compacx/info.json b/keyboards/takashicompany/compacx/info.json index 7690d3c333..5a75a6a672 100644 --- a/keyboards/takashicompany/compacx/info.json +++ b/keyboards/takashicompany/compacx/info.json @@ -8,6 +8,8 @@ "pid": "0x0014", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/takashicompany/compacx/rules.mk b/keyboards/takashicompany/compacx/rules.mk index 52deaa5d04..8e0e5ffd1a 100644 --- a/keyboards/takashicompany/compacx/rules.mk +++ b/keyboards/takashicompany/compacx/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/takashicompany/dogtag/config.h b/keyboards/takashicompany/dogtag/config.h index adcf8d7321..a5dac88437 100644 --- a/keyboards/takashicompany/dogtag/config.h +++ b/keyboards/takashicompany/dogtag/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -57,10 +56,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define LED_COMPOSE_PIN B3 //#define LED_KANA_PIN B4 -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN # define RGBLED_NUM 4 * 2 @@ -82,43 +77,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_TWINKLE #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -134,7 +97,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/takashicompany/dogtag/info.json b/keyboards/takashicompany/dogtag/info.json index b9f82c26cb..6da868a5c0 100644 --- a/keyboards/takashicompany/dogtag/info.json +++ b/keyboards/takashicompany/dogtag/info.json @@ -8,6 +8,8 @@ "pid": "0x0018", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/takashicompany/dogtag/rules.mk b/keyboards/takashicompany/dogtag/rules.mk index 08b1ffe09c..f4556ff1c6 100644 --- a/keyboards/takashicompany/dogtag/rules.mk +++ b/keyboards/takashicompany/dogtag/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/takashicompany/endzone34/config.h b/keyboards/takashicompany/endzone34/config.h index f74b828516..4429f10618 100644 --- a/keyboards/takashicompany/endzone34/config.h +++ b/keyboards/takashicompany/endzone34/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -39,21 +38,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - //#define LED_NUM_LOCK_PIN B0 //#define LED_CAPS_LOCK_PIN B1 //#define LED_SCROLL_LOCK_PIN B2 //#define LED_COMPOSE_PIN B3 //#define LED_KANA_PIN B4 -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN #define RGBLED_NUM 9 @@ -81,43 +71,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -133,7 +91,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/takashicompany/endzone34/info.json b/keyboards/takashicompany/endzone34/info.json index 2284f7a3b4..60ca453e13 100644 --- a/keyboards/takashicompany/endzone34/info.json +++ b/keyboards/takashicompany/endzone34/info.json @@ -8,6 +8,8 @@ "pid": "0x0006", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/takashicompany/endzone34/rules.mk b/keyboards/takashicompany/endzone34/rules.mk index 653c8343e7..f8fbdec9bd 100644 --- a/keyboards/takashicompany/endzone34/rules.mk +++ b/keyboards/takashicompany/endzone34/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/takashicompany/heavy_left/config.h b/keyboards/takashicompany/heavy_left/config.h index fa31dccb90..0837c946c2 100644 --- a/keyboards/takashicompany/heavy_left/config.h +++ b/keyboards/takashicompany/heavy_left/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 * 2 @@ -50,10 +49,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define LED_COMPOSE_PIN B3 //#define LED_KANA_PIN B4 -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN # define RGBLED_NUM 6 * 2 @@ -75,43 +70,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_TWINKLE #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -128,8 +91,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 - #define EE_HANDS diff --git a/keyboards/takashicompany/heavy_left/info.json b/keyboards/takashicompany/heavy_left/info.json index 6f04de1738..cd2132af0c 100644 --- a/keyboards/takashicompany/heavy_left/info.json +++ b/keyboards/takashicompany/heavy_left/info.json @@ -8,6 +8,8 @@ "pid": "0x0015", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/takashicompany/heavy_left/rules.mk b/keyboards/takashicompany/heavy_left/rules.mk index ce3c5bfaeb..2bccd4af0c 100644 --- a/keyboards/takashicompany/heavy_left/rules.mk +++ b/keyboards/takashicompany/heavy_left/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/takashicompany/minizone/config.h b/keyboards/takashicompany/minizone/config.h index 0c8def659f..4134abbfdc 100644 --- a/keyboards/takashicompany/minizone/config.h +++ b/keyboards/takashicompany/minizone/config.h @@ -3,7 +3,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -25,21 +24,12 @@ /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - //#define LED_NUM_LOCK_PIN B0 //#define LED_CAPS_LOCK_PIN B1 //#define LED_SCROLL_LOCK_PIN B2 //#define LED_COMPOSE_PIN B3 //#define LED_KANA_PIN B4 -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN # define RGBLED_NUM 11 @@ -65,43 +55,11 @@ //# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -117,7 +75,3 @@ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/takashicompany/minizone/info.json b/keyboards/takashicompany/minizone/info.json index 51fb57276c..882a8ebdd5 100644 --- a/keyboards/takashicompany/minizone/info.json +++ b/keyboards/takashicompany/minizone/info.json @@ -8,6 +8,8 @@ "pid": "0x0021", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/takashicompany/minizone/rules.mk b/keyboards/takashicompany/minizone/rules.mk index c7cf213756..60c7bb59b5 100644 --- a/keyboards/takashicompany/minizone/rules.mk +++ b/keyboards/takashicompany/minizone/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/takashicompany/qoolee/config.h b/keyboards/takashicompany/qoolee/config.h index f71e3de280..2cb1e76c8a 100644 --- a/keyboards/takashicompany/qoolee/config.h +++ b/keyboards/takashicompany/qoolee/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 3 @@ -43,21 +42,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define ENCODERS_PAD_A { D2 } #define ENCODERS_PAD_B { D1 } -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - //#define LED_NUM_LOCK_PIN B0 //#define LED_CAPS_LOCK_PIN B1 //#define LED_SCROLL_LOCK_PIN B2 //#define LED_COMPOSE_PIN B3 //#define LED_KANA_PIN B4 -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN # define RGBLED_NUM 6 @@ -83,43 +73,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -135,7 +93,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/takashicompany/qoolee/info.json b/keyboards/takashicompany/qoolee/info.json index 89335351ce..b7ed85676f 100644 --- a/keyboards/takashicompany/qoolee/info.json +++ b/keyboards/takashicompany/qoolee/info.json @@ -8,6 +8,8 @@ "pid": "0x0013", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/takashicompany/qoolee/rules.mk b/keyboards/takashicompany/qoolee/rules.mk index 2b0013386e..0aa58dc861 100644 --- a/keyboards/takashicompany/qoolee/rules.mk +++ b/keyboards/takashicompany/qoolee/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/takashicompany/radialex/config.h b/keyboards/takashicompany/radialex/config.h index 468a850f4b..e021bf22de 100644 --- a/keyboards/takashicompany/radialex/config.h +++ b/keyboards/takashicompany/radialex/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 7 @@ -45,10 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define LED_COMPOSE_PIN B3 //#define LED_KANA_PIN B4 -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN # define RGBLED_NUM 12 @@ -69,43 +64,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_TWINKLE #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -121,7 +84,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/takashicompany/radialex/info.json b/keyboards/takashicompany/radialex/info.json index 8aff0b5ab8..1ed37283e7 100644 --- a/keyboards/takashicompany/radialex/info.json +++ b/keyboards/takashicompany/radialex/info.json @@ -8,6 +8,8 @@ "pid": "0x0019", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/takashicompany/radialex/rules.mk b/keyboards/takashicompany/radialex/rules.mk index d990e8cae3..7800cd8075 100644 --- a/keyboards/takashicompany/radialex/rules.mk +++ b/keyboards/takashicompany/radialex/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/takashicompany/spreadwriter/config.h b/keyboards/takashicompany/spreadwriter/config.h index e22f102dc1..99bbfdf671 100644 --- a/keyboards/takashicompany/spreadwriter/config.h +++ b/keyboards/takashicompany/spreadwriter/config.h @@ -3,7 +3,6 @@ #pragma once -#include "config_common.h" #define ENCODER_RESOLUTION 4 #define ENCODERS_PAD_A { D1 } |