9 files changed, 4 insertions, 44 deletions
diff --git a/keyboards/studiokestra/bourgeau/config.h b/keyboards/studiokestra/bourgeau/config.h
index 07ac871795..152950f61e 100644
--- a/keyboards/studiokestra/bourgeau/config.h
+++ b/keyboards/studiokestra/bourgeau/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 #define MATRIX_ROWS 6
 #define MATRIX_COLS 16
@@ -56,9 +55,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -68,7 +64,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/studiokestra/bourgeau/readme.md b/keyboards/studiokestra/bourgeau/readme.md
index b0a0bb2a89..16f87618e0 100644
--- a/keyboards/studiokestra/bourgeau/readme.md
+++ b/keyboards/studiokestra/bourgeau/readme.md
@@ -11,7 +11,7 @@ Compact 75% universal hotswap PCB with USB-C that supports a fixed 6.25U bottom
 There are 3 ways to put the board in bootloader mode:
 
 - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR
-- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR
+- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR
 - With the default layout, toggle Layer 1 and press the `ESC` key.
 
 ## Compiling Firmware
diff --git a/keyboards/studiokestra/cascade/config.h b/keyboards/studiokestra/cascade/config.h
index 6e02763997..1a7bdb4860 100644
--- a/keyboards/studiokestra/cascade/config.h
+++ b/keyboards/studiokestra/cascade/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 14
@@ -55,9 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -67,7 +63,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/studiokestra/cascade/readme.md b/keyboards/studiokestra/cascade/readme.md
index e217b3edea..db55844ed1 100644
--- a/keyboards/studiokestra/cascade/readme.md
+++ b/keyboards/studiokestra/cascade/readme.md
@@ -11,7 +11,7 @@
 There are 3 ways to put the board in bootloader mode:
 
 - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR
-- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR
+- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR
 - With the default layout, toggle Layer 1 and press the `ESC` key.
 
 ## Compiling Firmware
diff --git a/keyboards/studiokestra/galatea/config.h b/keyboards/studiokestra/galatea/config.h
index 2e598b1d95..540213d551 100644
--- a/keyboards/studiokestra/galatea/config.h
+++ b/keyboards/studiokestra/galatea/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 #define MATRIX_ROWS 12
 #define MATRIX_COLS 9
@@ -55,14 +54,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
-
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/studiokestra/galatea/readme.md b/keyboards/studiokestra/galatea/readme.md
index 08a6eae011..1268c596bf 100644
--- a/keyboards/studiokestra/galatea/readme.md
+++ b/keyboards/studiokestra/galatea/readme.md
@@ -13,7 +13,7 @@ TKL H87/88c compatible PCB with support for the most common layouts.
 There are 3 ways to put the board in bootloader mode:
 
 - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR
-- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR
+- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR
 - With the default layout, toggle Layer 1 and press the `R` key. 
 
 ## Compiling Firmware
diff --git a/keyboards/studiokestra/nascent/config.h b/keyboards/studiokestra/nascent/config.h
index a88a42348c..4ce9f6230f 100644
--- a/keyboards/studiokestra/nascent/config.h
+++ b/keyboards/studiokestra/nascent/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 #define MATRIX_ROWS 10
 #define MATRIX_COLS 8
@@ -29,14 +28,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LED_CAPS_LOCK_PIN B6
 #define LED_PIN_ON_STATE 0
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
-
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/studiokestra/nue/config.h b/keyboards/studiokestra/nue/config.h
index 1e9f715a6e..2730122900 100644
--- a/keyboards/studiokestra/nue/config.h
+++ b/keyboards/studiokestra/nue/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 14
@@ -26,14 +25,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { B0, B7, F1, F5, F4}
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
-
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/studiokestra/nue/readme.md b/keyboards/studiokestra/nue/readme.md
index f29f27be22..42e72902e4 100644
--- a/keyboards/studiokestra/nue/readme.md
+++ b/keyboards/studiokestra/nue/readme.md
@@ -11,7 +11,7 @@
 There are 3 ways to put the board in bootloader mode:
 
 - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR
-- While the PCB is plugged into the PC, press the physical `QK_BOOT` button on the back of the board, OR
+- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR
 - With the default layout, toggle Layer 1 and press the `R` key. 
 
 ## Compiling Firmware