3 files changed, 3 insertions, 49 deletions
diff --git a/keyboards/senselessclay/ck65/config.h b/keyboards/senselessclay/ck65/config.h
index df7159a1cf..5aeeee7a74 100644
--- a/keyboards/senselessclay/ck65/config.h
+++ b/keyboards/senselessclay/ck65/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
 
 /*
  * Keyboard Matrix Assignments
@@ -41,43 +36,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -94,10 +57,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
-
 /* RGB Backlighting */
 #define RGB_DI_PIN B1
 #define RGBLED_NUM 69
diff --git a/keyboards/senselessclay/ck65/info.json b/keyboards/senselessclay/ck65/info.json
index 54e43ccc94..cb596c21e2 100644
--- a/keyboards/senselessclay/ck65/info.json
+++ b/keyboards/senselessclay/ck65/info.json
@@ -8,9 +8,12 @@
         "pid": "0x0651",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layout_aliases": {
         "LAYOUT": "LAYOUT_65_iso"
     },
+    "community_layouts": ["65_iso"],
     "layouts": {
         "LAYOUT_65_iso": {
             "layout": [
diff --git a/keyboards/senselessclay/ck65/rules.mk b/keyboards/senselessclay/ck65/rules.mk
index a5e9413383..502dc1b7bd 100644
--- a/keyboards/senselessclay/ck65/rules.mk
+++ b/keyboards/senselessclay/ck65/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
@@ -16,5 +10,3 @@ NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
-
-LAYOUTS = 65_iso