6 files changed, 4 insertions, 78 deletions
diff --git a/keyboards/rominronin/katana60/rev1/config.h b/keyboards/rominronin/katana60/rev1/config.h
index 97a18443a1..c81777c644 100644
--- a/keyboards/rominronin/katana60/rev1/config.h
+++ b/keyboards/rominronin/katana60/rev1/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -39,43 +38,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION ROW2COL
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 #define TAPPING_TERM 200
 
 /*
diff --git a/keyboards/rominronin/katana60/rev1/info.json b/keyboards/rominronin/katana60/rev1/info.json
index 1b4ec3c943..8421147017 100644
--- a/keyboards/rominronin/katana60/rev1/info.json
+++ b/keyboards/rominronin/katana60/rev1/info.json
@@ -8,6 +8,8 @@
     "pid": "0x0C2C",
     "device_version": "0.0.1"
   },
+  "processor": "atmega32u4",
+  "bootloader": "atmel-dfu",
   "layouts": {
     "LAYOUT": {
       "layout": [
diff --git a/keyboards/rominronin/katana60/rev1/rules.mk b/keyboards/rominronin/katana60/rev1/rules.mk
index 354f194ca2..309e55c9f4 100644
--- a/keyboards/rominronin/katana60/rev1/rules.mk
+++ b/keyboards/rominronin/katana60/rev1/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/rominronin/katana60/rev2/config.h b/keyboards/rominronin/katana60/rev2/config.h
index 0671c86044..729b917d0c 100644
--- a/keyboards/rominronin/katana60/rev2/config.h
+++ b/keyboards/rominronin/katana60/rev2/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -39,43 +38,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 #define TAPPING_TERM 200
 
 /*
diff --git a/keyboards/rominronin/katana60/rev2/info.json b/keyboards/rominronin/katana60/rev2/info.json
index 3b26ff635e..a036d85384 100644
--- a/keyboards/rominronin/katana60/rev2/info.json
+++ b/keyboards/rominronin/katana60/rev2/info.json
@@ -8,6 +8,8 @@
         "pid": "0xF03B",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_7u_a": {
             "layout": [
diff --git a/keyboards/rominronin/katana60/rev2/rules.mk b/keyboards/rominronin/katana60/rev2/rules.mk
index a2a5932cdc..fce764c22d 100644
--- a/keyboards/rominronin/katana60/rev2/rules.mk
+++ b/keyboards/rominronin/katana60/rev2/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #