diff options
Diffstat (limited to 'keyboards/reviung')
24 files changed, 19 insertions, 419 deletions
diff --git a/keyboards/reviung/reviung33/config.h b/keyboards/reviung/reviung33/config.h index f343ff128c..9b798af9dc 100644 --- a/keyboards/reviung/reviung33/config.h +++ b/keyboards/reviung/reviung33/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 10 /* * Keyboard Matrix Assignments @@ -57,51 +52,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -117,7 +74,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/reviung/reviung33/info.json b/keyboards/reviung/reviung33/info.json index af7584eee0..32097d284d 100644 --- a/keyboards/reviung/reviung33/info.json +++ b/keyboards/reviung/reviung33/info.json @@ -8,6 +8,8 @@ "pid": "0x516D", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layout_aliases": { "LAYOUT_reviung33": "LAYOUT" }, diff --git a/keyboards/reviung/reviung33/rules.mk b/keyboards/reviung/reviung33/rules.mk index 77a2d1ee7d..ff287d5235 100644 --- a/keyboards/reviung/reviung33/rules.mk +++ b/keyboards/reviung/reviung33/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/reviung/reviung34/config.h b/keyboards/reviung/reviung34/config.h index 553cd52dc1..52c8f79ee7 100755 --- a/keyboards/reviung/reviung34/config.h +++ b/keyboards/reviung/reviung34/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 9 /* * Keyboard Matrix Assignments @@ -39,70 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -118,7 +54,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/reviung/reviung34/info.json b/keyboards/reviung/reviung34/info.json index c11eef91b1..8699ea8b84 100755 --- a/keyboards/reviung/reviung34/info.json +++ b/keyboards/reviung/reviung34/info.json @@ -8,6 +8,8 @@ "pid": "0x4E03", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "community_layouts": [ "split_3x5_2" ], diff --git a/keyboards/reviung/reviung34/rules.mk b/keyboards/reviung/reviung34/rules.mk index 203f9645e5..7829a2753b 100755 --- a/keyboards/reviung/reviung34/rules.mk +++ b/keyboards/reviung/reviung34/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/reviung/reviung39/config.h b/keyboards/reviung/reviung39/config.h index 2c905f4de1..5c27a3b832 100644 --- a/keyboards/reviung/reviung39/config.h +++ b/keyboards/reviung/reviung39/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 7 -#define MATRIX_COLS 6 /* * Keyboard Matrix Assignments @@ -39,70 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -118,7 +54,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/reviung/reviung39/info.json b/keyboards/reviung/reviung39/info.json index 1bd626f202..3ad398f2e7 100644 --- a/keyboards/reviung/reviung39/info.json +++ b/keyboards/reviung/reviung39/info.json @@ -8,6 +8,8 @@ "pid": "0x5F10", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layout_aliases": { "LAYOUT_reviung39": "LAYOUT" }, diff --git a/keyboards/reviung/reviung39/keymaps/default/config.h b/keyboards/reviung/reviung39/keymaps/default/config.h index d27f9ee4a8..11a0609742 100644 --- a/keyboards/reviung/reviung39/keymaps/default/config.h +++ b/keyboards/reviung/reviung39/keymaps/default/config.h @@ -36,10 +36,4 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif diff --git a/keyboards/reviung/reviung39/keymaps/default_s/config.h b/keyboards/reviung/reviung39/keymaps/default_s/config.h index c1f4031e50..a18a508371 100644 --- a/keyboards/reviung/reviung39/keymaps/default_s/config.h +++ b/keyboards/reviung/reviung39/keymaps/default_s/config.h @@ -36,10 +36,4 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif diff --git a/keyboards/reviung/reviung39/rules.mk b/keyboards/reviung/reviung39/rules.mk index 203f9645e5..7829a2753b 100644 --- a/keyboards/reviung/reviung39/rules.mk +++ b/keyboards/reviung/reviung39/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/reviung/reviung41/config.h b/keyboards/reviung/reviung41/config.h index 57fb0770eb..23b05ea16c 100644 --- a/keyboards/reviung/reviung41/config.h +++ b/keyboards/reviung/reviung41/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 7 -#define MATRIX_COLS 6 /* * Keyboard Matrix Assignments @@ -41,15 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN #define RGBLED_NUM 11 @@ -68,51 +54,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -128,7 +76,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/reviung/reviung41/info.json b/keyboards/reviung/reviung41/info.json index 6ee7b0c108..b7fea0f89f 100644 --- a/keyboards/reviung/reviung41/info.json +++ b/keyboards/reviung/reviung41/info.json @@ -8,6 +8,8 @@ "pid": "0xDCCB", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layout_aliases": { "LAYOUT_reviung41": "LAYOUT" }, diff --git a/keyboards/reviung/reviung41/keymaps/ciutadellla/keymap.c b/keyboards/reviung/reviung41/keymaps/ciutadellla/keymap.c index e3ae65a45f..98dda7fe19 100644 --- a/keyboards/reviung/reviung41/keymaps/ciutadellla/keymap.c +++ b/keyboards/reviung/reviung41/keymaps/ciutadellla/keymap.c @@ -80,7 +80,7 @@ }; //https://unicode-table.com/en/#00F1 - const uint32_t PROGMEM unicode_map[] = { + const uint32_t unicode_map[] PROGMEM = { [CKC_EUR] = 0x20AC, //€ [N_TILDE] = 0x00F1, // ñ [COMB_ACUTE_ACCENT] = 0x0301, // ´ @@ -132,7 +132,7 @@ }; - void matrix_init_user(){ + void matrix_init_user(void){ set_unicode_input_mode(UNICODE_MODE_MACOS); } @@ -163,7 +163,7 @@ #define TD_CTRL_LANG TD(_TD_CTRL_LANG) #define TD_SCLN_NTILDE TD(_TD_SCLN_NTILDE) //TP with costum keycodes has to be a funtion - void td_scln_ntilde(qk_tap_dance_state_t *state, void *user_data) { + void td_scln_ntilde(tap_dance_state_t *state, void *user_data) { if (state->count == 1) { register_code(KC_SCLN); unregister_code(KC_SCLN); @@ -174,7 +174,7 @@ } // Tap Dance Definitions - qk_tap_dance_action_t tap_dance_actions[] = { + tap_dance_action_t tap_dance_actions[] = { [_TD_TAB_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_TAB, KC_ESC), [_TD_BSPC_WDEL] = ACTION_TAP_DANCE_DOUBLE(KC_BSPC, LALT(KC_BSPC)), [_TD_SFT_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS), diff --git a/keyboards/reviung/reviung41/rules.mk b/keyboards/reviung/reviung41/rules.mk index e4e00e6274..4465ace172 100644 --- a/keyboards/reviung/reviung41/rules.mk +++ b/keyboards/reviung/reviung41/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/reviung/reviung5/config.h b/keyboards/reviung/reviung5/config.h index e7d270a7a4..66552b7f97 100644 --- a/keyboards/reviung/reviung5/config.h +++ b/keyboards/reviung/reviung5/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 5 /* * Keyboard Matrix Assignments @@ -65,51 +60,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -125,7 +82,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/reviung/reviung5/info.json b/keyboards/reviung/reviung5/info.json index d804be4a86..8422e88117 100644 --- a/keyboards/reviung/reviung5/info.json +++ b/keyboards/reviung/reviung5/info.json @@ -8,6 +8,8 @@ "pid": "0x4F0D", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layout_aliases": { "LAYOUT_reviung5": "LAYOUT" }, diff --git a/keyboards/reviung/reviung5/rules.mk b/keyboards/reviung/reviung5/rules.mk index a72c119315..5d71c286fa 100644 --- a/keyboards/reviung/reviung5/rules.mk +++ b/keyboards/reviung/reviung5/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/reviung/reviung53/config.h b/keyboards/reviung/reviung53/config.h index 5776998912..c654abc335 100644 --- a/keyboards/reviung/reviung53/config.h +++ b/keyboards/reviung/reviung53/config.h @@ -3,11 +3,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 7 -#define MATRIX_COLS 8 /* * Keyboard Matrix Assignments @@ -25,21 +20,6 @@ /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -// #define SOFT_SERIAL_PIN D0 - -//#define LED_NUM_LOCK_PIN B0 -//#define LED_CAPS_LOCK_PIN B1 -//#define LED_SCROLL_LOCK_PIN B2 -//#define LED_COMPOSE_PIN B3 -//#define LED_KANA_PIN B4 - -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN #define RGBLED_NUM 10 @@ -58,51 +38,13 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -118,7 +60,3 @@ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/reviung/reviung53/info.json b/keyboards/reviung/reviung53/info.json index c8cec6578e..86e4d054a1 100644 --- a/keyboards/reviung/reviung53/info.json +++ b/keyboards/reviung/reviung53/info.json @@ -8,6 +8,8 @@ "pid": "0x4E09", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layout_aliases": { "LAYOUT_reviung53": "LAYOUT" }, diff --git a/keyboards/reviung/reviung53/rules.mk b/keyboards/reviung/reviung53/rules.mk index bc1c6f2dc0..a927de843c 100644 --- a/keyboards/reviung/reviung53/rules.mk +++ b/keyboards/reviung/reviung53/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/reviung/reviung61/config.h b/keyboards/reviung/reviung61/config.h index cc3039ab59..8f3883af19 100644 --- a/keyboards/reviung/reviung61/config.h +++ b/keyboards/reviung/reviung61/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 /* * Keyboard Matrix Assignments @@ -39,12 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/reviung/reviung61/info.json b/keyboards/reviung/reviung61/info.json index 25ba896b2f..5bb430d6a1 100644 --- a/keyboards/reviung/reviung61/info.json +++ b/keyboards/reviung/reviung61/info.json @@ -8,6 +8,9 @@ "pid": "0x7C1A", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "community_layouts": ["60_ansi"], "layouts": { "LAYOUT_60_ansi": { "layout": [ diff --git a/keyboards/reviung/reviung61/rules.mk b/keyboards/reviung/reviung61/rules.mk index badcdb845b..ad81ce036a 100644 --- a/keyboards/reviung/reviung61/rules.mk +++ b/keyboards/reviung/reviung61/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = 60_ansi |