10 files changed, 5 insertions, 159 deletions
diff --git a/keyboards/reviung/reviung33/config.h b/keyboards/reviung/reviung33/config.h
index f343ff128c..128b843174 100644
--- a/keyboards/reviung/reviung33/config.h
+++ b/keyboards/reviung/reviung33/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 4
@@ -82,27 +81,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/reviung/reviung34/config.h b/keyboards/reviung/reviung34/config.h
index 553cd52dc1..3f692a943a 100755
--- a/keyboards/reviung/reviung34/config.h
+++ b/keyboards/reviung/reviung34/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 4
@@ -44,10 +43,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
 // #define RGB_DI_PIN E2
 // #ifdef RGB_DI_PIN
 //   #define RGBLED_NUM 16
@@ -70,8 +65,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -83,27 +76,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/reviung/reviung39/config.h b/keyboards/reviung/reviung39/config.h
index 2c905f4de1..e8692e07c7 100644
--- a/keyboards/reviung/reviung39/config.h
+++ b/keyboards/reviung/reviung39/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 7
@@ -44,10 +43,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
 // #define RGB_DI_PIN E2
 // #ifdef RGB_DI_PIN
 //   #define RGBLED_NUM 16
@@ -70,8 +65,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -83,27 +76,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/reviung/reviung41/config.h b/keyboards/reviung/reviung41/config.h
index 57fb0770eb..9dc1ff76ea 100644
--- a/keyboards/reviung/reviung41/config.h
+++ b/keyboards/reviung/reviung41/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 7
@@ -46,10 +45,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
   #define RGBLED_NUM 11
@@ -93,27 +88,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/reviung/reviung41/keymaps/ciutadellla/keymap.c b/keyboards/reviung/reviung41/keymaps/ciutadellla/keymap.c
index e3ae65a45f..98dda7fe19 100644
--- a/keyboards/reviung/reviung41/keymaps/ciutadellla/keymap.c
+++ b/keyboards/reviung/reviung41/keymaps/ciutadellla/keymap.c
@@ -80,7 +80,7 @@
  };
 
  //https://unicode-table.com/en/#00F1
- const uint32_t PROGMEM unicode_map[] = {
+ const uint32_t unicode_map[] PROGMEM = {
      [CKC_EUR] = 0x20AC, //€
      [N_TILDE] = 0x00F1,  // ñ
      [COMB_ACUTE_ACCENT] = 0x0301,  // ´
@@ -132,7 +132,7 @@
  };
 
 
- void matrix_init_user(){
+ void matrix_init_user(void){
      set_unicode_input_mode(UNICODE_MODE_MACOS);
  }
 
@@ -163,7 +163,7 @@
  #define TD_CTRL_LANG TD(_TD_CTRL_LANG)
  #define TD_SCLN_NTILDE TD(_TD_SCLN_NTILDE) //TP with costum keycodes has to be a funtion
 
- void td_scln_ntilde(qk_tap_dance_state_t *state, void *user_data) {
+ void td_scln_ntilde(tap_dance_state_t *state, void *user_data) {
       if (state->count == 1) {
          register_code(KC_SCLN);
          unregister_code(KC_SCLN);
@@ -174,7 +174,7 @@
  }
 
  // Tap Dance Definitions
- qk_tap_dance_action_t tap_dance_actions[] = {
+ tap_dance_action_t tap_dance_actions[] = {
      [_TD_TAB_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_TAB, KC_ESC),
      [_TD_BSPC_WDEL] = ACTION_TAP_DANCE_DOUBLE(KC_BSPC, LALT(KC_BSPC)),
      [_TD_SFT_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS),
diff --git a/keyboards/reviung/reviung5/config.h b/keyboards/reviung/reviung5/config.h
index e7d270a7a4..57a1a672ed 100644
--- a/keyboards/reviung/reviung5/config.h
+++ b/keyboards/reviung/reviung5/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS  1
@@ -90,27 +89,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/reviung/reviung53/config.h b/keyboards/reviung/reviung53/config.h
index 5776998912..97d03ecb6e 100644
--- a/keyboards/reviung/reviung53/config.h
+++ b/keyboards/reviung/reviung53/config.h
@@ -3,7 +3,6 @@
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 7
@@ -36,10 +35,6 @@
 //#define LED_COMPOSE_PIN B3
 //#define LED_KANA_PIN B4
 
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
 #define RGBLED_NUM 10
@@ -83,27 +78,6 @@
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/reviung/reviung61/config.h b/keyboards/reviung/reviung61/config.h
index cc3039ab59..b475f514a4 100644
--- a/keyboards/reviung/reviung61/config.h
+++ b/keyboards/reviung/reviung61/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5 
diff --git a/keyboards/reviung/reviung61/info.json b/keyboards/reviung/reviung61/info.json
index 25ba896b2f..a1bf103f55 100644
--- a/keyboards/reviung/reviung61/info.json
+++ b/keyboards/reviung/reviung61/info.json
@@ -8,6 +8,7 @@
         "pid": "0x7C1A",
         "device_version": "0.0.1"
     },
+    "community_layouts": ["60_ansi"],
     "layouts": {
         "LAYOUT_60_ansi": {
             "layout": [
diff --git a/keyboards/reviung/reviung61/rules.mk b/keyboards/reviung/reviung61/rules.mk
index badcdb845b..23e7470839 100644
--- a/keyboards/reviung/reviung61/rules.mk
+++ b/keyboards/reviung/reviung61/rules.mk
@@ -16,5 +16,3 @@ NKRO_ENABLE = no            # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
-
-LAYOUTS = 60_ansi