3 files changed, 2 insertions, 39 deletions
diff --git a/keyboards/rate/pistachio_pro/config.h b/keyboards/rate/pistachio_pro/config.h
index 464a68af72..5f7185c926 100644
--- a/keyboards/rate/pistachio_pro/config.h
+++ b/keyboards/rate/pistachio_pro/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 #define ENCODERS_PAD_A {D2}
 #define ENCODERS_PAD_B {D3}
@@ -28,40 +27,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define MATRIX_ROW_PINS { D4, C6, D7, B3, B4, B5 }
 #define MATRIX_COL_PINS { E6, F0, F1, F4, F5, F6, F7, B6, D6 }
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -78,10 +49,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
-
 /* OLED */
 #define OLED_DISPLAY_128X64
 #define OLED_FONT_H "keyboards/rate/pistachio_pro/lib/glcdfont.c"
diff --git a/keyboards/rate/pistachio_pro/info.json b/keyboards/rate/pistachio_pro/info.json
index e762f30b69..9a212a859b 100644
--- a/keyboards/rate/pistachio_pro/info.json
+++ b/keyboards/rate/pistachio_pro/info.json
@@ -8,6 +8,8 @@
         "pid": "0xF40C",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT": {
             "layout": [
diff --git a/keyboards/rate/pistachio_pro/rules.mk b/keyboards/rate/pistachio_pro/rules.mk
index 6816d8d32b..df27be46be 100644
--- a/keyboards/rate/pistachio_pro/rules.mk
+++ b/keyboards/rate/pistachio_pro/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #