diff options
Diffstat (limited to 'keyboards/rama')
59 files changed, 0 insertions, 2608 deletions
diff --git a/keyboards/rama/koyu/config.h b/keyboards/rama/koyu/config.h deleted file mode 100644 index 4fa8c3d8ad..0000000000 --- a/keyboards/rama/koyu/config.h +++ /dev/null @@ -1,142 +0,0 @@ -/* Copyright 2017 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#include "config_common.h" - -// USB Device descriptor parameter -#define VENDOR_ID 0x5241 // "RW" -#define PRODUCT_ID 0x4B59 // "KY" -#define DEVICE_VER 0x0001 -#define MANUFACTURER RAMA.WORKS -#define PRODUCT RAMA KOYU -#define DESCRIPTION RAMA KOYU Keyboard - - - -// key matrix size -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - -// KOYU PCB pin-out -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } -#define UNUSED_PINS - -// IS31FL3731 driver -#define DRIVER_COUNT 2 -#define DRIVER_LED_TOTAL 72 - -// COL2ROW or ROW2COL -#define DIODE_DIRECTION COL2ROW - -// Set 0 if debouncing isn't needed -#define DEBOUNCE 5 - -// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap -#define LOCKING_SUPPORT_ENABLE -// Locking resynchronize hack -#define LOCKING_RESYNC_ENABLE - - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -// disable debug print -//#define NO_DEBUG - -// disable print -//#define NO_PRINT - -// disable action features -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#define RGB_BACKLIGHT_ENABLED 1 - -// This conditionally compiles the backlight code for KOYU specifics -#define RGB_BACKLIGHT_KOYU - -// enable/disable LEDs based on layout -// they aren't really used if RGB_BACKLIGHT_M60_A defined -#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1 -#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 -#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1 -#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1 -#define RGB_BACKLIGHT_USE_ISO_ENTER 0 -#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 1 - -// disable backlight when USB suspended (PC sleep/hibernate/shutdown) -#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0 - -// disable backlight after timeout in minutes, 0 = no timeout -#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 - -// the default brightness -#define RGB_BACKLIGHT_BRIGHTNESS 255 - -// the default effect (RGB test) -#define RGB_BACKLIGHT_EFFECT 255 - -// the default effect speed (0-3) -#define RGB_BACKLIGHT_EFFECT_SPEED 0 - -// the default color1 and color2 -#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } -#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } - -// These define which keys in the matrix are alphas/mods -// Used for backlight effects so colors are different for -// alphas vs. mods -// Each value is for a row, bit 0 is column 0 -// Alpha=0 Mod=1 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0110000000000001 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0110000000000001 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0111000000000001 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0111000000000001 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0111100000000111 - -#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } -#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } -#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } -#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } - -#define DYNAMIC_KEYMAP_LAYER_COUNT 4 - -// EEPROM usage - -// TODO: refactor with new user EEPROM code (coming soon) -#define EEPROM_MAGIC 0x451F -#define EEPROM_MAGIC_ADDR 32 -// Bump this every time we change what we store -// This will automatically reset the EEPROM with defaults -// and avoid loading invalid data from the EEPROM -#define EEPROM_VERSION 0x08 -#define EEPROM_VERSION_ADDR 34 - -// Backlight config starts after EEPROM version -#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35 -// Dynamic keymap starts after backlight config (35+31) -#define DYNAMIC_KEYMAP_EEPROM_ADDR 66 -// Dynamic macro starts after dynamic keymaps (66+(4*5*15*2)) = (66+600) -#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 666 -#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 358 -#define DYNAMIC_KEYMAP_MACRO_COUNT 16 diff --git a/keyboards/rama/koyu/info.json b/keyboards/rama/koyu/info.json deleted file mode 100644 index 4b6edc7bfa..0000000000 --- a/keyboards/rama/koyu/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "KOYU", - "url": "", - "maintainer": "Wilba", - "bootloader": "DFU", - "width": 16, - "height": 5, - "layouts": { - "LAYOUT_all": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Num Lock", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Insert", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Home", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"/", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Ctrl", "x":11, "y":4, "w":1.5}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}] - } - } -}
\ No newline at end of file diff --git a/keyboards/rama/koyu/keymaps/default/keymap.c b/keyboards/rama/koyu/keymaps/default/keymap.c deleted file mode 100644 index f6bc94fbd6..0000000000 --- a/keyboards/rama/koyu/keymaps/default/keymap.c +++ /dev/null @@ -1,36 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - // Default layer - [0] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, KC_HOME, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - MO(1), KC_LGUI, KC_LALT, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_RGHT), - - // Fn1 Layer - [1] = LAYOUT_all( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, KC_TRNS, - KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - - // Fn2 Layer - [2] = LAYOUT_all( - KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - - // Fn3 Layer - [3] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), -}; diff --git a/keyboards/rama/koyu/koyu.c b/keyboards/rama/koyu/koyu.c deleted file mode 100644 index 03d1e12159..0000000000 --- a/keyboards/rama/koyu/koyu.c +++ /dev/null @@ -1,18 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#ifndef RGB_BACKLIGHT_KOYU -#error RGB_BACKLIGHT_KOYU not defined, you done goofed somehao, brah -#endif diff --git a/keyboards/rama/koyu/koyu.h b/keyboards/rama/koyu/koyu.h deleted file mode 100644 index c2aaa0273a..0000000000 --- a/keyboards/rama/koyu/koyu.h +++ /dev/null @@ -1,42 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" -#include "../../zeal60/rgb_backlight_keycodes.h" -#include "../../zeal60/zeal60_keycodes.h" - -#define ____ KC_NO - -// Right switch of split backspace is at 2,13 and is the only switch -// whose physical position doesn't match switch matrix position :-( -// However, it also makes no sense to view the physical as 16 columns, -// so the numbering goes 00 to 14. Deal with it. - -#define LAYOUT_all( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, K014, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ - K400, K401, K402, K407, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \ - { K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ - { K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, ____, K411, K412, K413, K414 } \ -} diff --git a/keyboards/rama/koyu/readme.md b/keyboards/rama/koyu/readme.md deleted file mode 100644 index c249bf11b6..0000000000 --- a/keyboards/rama/koyu/readme.md +++ /dev/null @@ -1,23 +0,0 @@ -# RAMA KOYU - - - -The 'wait' for something isn't the most conscious desire, but that anticipation creates nostalgia. - -At Rama Works, you've embraced this. From updates of the blog, to direct communication with the community, being part of a Rama Works product doesn't just start when you receive it. If you've ever received a Rama Works product, you know that no detail is overlooked. - -Let us take you on a journey that will capture that sensory experience, and explore the gravitational interaction between aesthetic and design. The Rama Works 'X' element personifies the understanding that taking something away doesn't necessarily make it less. - -This is the sound of Rama Works. Never too busy-a feeling of delightful modern weightlessness. A rich sonic experience. Sparse and ethereal, this music boldly inhabits a nondescript, borderless space. Warm, synthetic textures, bespoke musical sound design. percussive elements percolating and accentuating movement on the screen and in the stereo field. a sonic palette full of clicks, taps and resonances evoking a sense of calm comfort and familiarity. - -[More info at RAMA WORKS](https://rama.works/koyu/) - -Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582) -Hardware Supported: RAMA KOYU PCB -Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/) - -Make example for this keyboard (after setting up your build environment): - - make rama/koyu:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/rama/koyu/rules.mk b/keyboards/rama/koyu/rules.mk deleted file mode 100644 index 5e470769d6..0000000000 --- a/keyboards/rama/koyu/rules.mk +++ /dev/null @@ -1,80 +0,0 @@ - - -# project specific files -SRC = keyboards/zeal60/zeal60.c \ - keyboards/zeal60/rgb_backlight.c \ - quantum/color.c \ - drivers/issi/is31fl3731.c \ - drivers/avr/i2c_master.c - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section -BOOTLOADER = atmel-dfu - -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DNO_SUSPEND_POWER_DOWN - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -RAW_ENABLE = yes -DYNAMIC_KEYMAP_ENABLE = yes -CIE1931_CURVE = yes - -#LAYOUTS = ??? diff --git a/keyboards/rama/m10_b/config.h b/keyboards/rama/m10_b/config.h deleted file mode 100644 index 32d1d21ed3..0000000000 --- a/keyboards/rama/m10_b/config.h +++ /dev/null @@ -1,206 +0,0 @@ -/* -Copyright 2018 Wilba - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x5241 // "RW" -#define PRODUCT_ID 0x00AB // 10-B -#define DEVICE_VER 0x0001 -#define MANUFACTURER RAMA.WORKS -#define PRODUCT RAMA M10-B -#define DESCRIPTION RAMA M10-B - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 10 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { E6 } -#define MATRIX_COL_PINS { D7, B6, F0, D6, B5, F1, D4, B4, F4, F5 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -#define BACKLIGHT_PIN C6 -//#define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -//#define WT_MONO_BACKLIGHT - -#define DYNAMIC_KEYMAP_LAYER_COUNT 4 - -// EEPROM usage - -// TODO: refactor with new user EEPROM code (coming soon) -#define EEPROM_MAGIC 0x451F -#define EEPROM_MAGIC_ADDR 32 -// Bump this every time we change what we store -// This will automatically reset the EEPROM with defaults -// and avoid loading invalid data from the EEPROM -#define EEPROM_VERSION 0x08 -#define EEPROM_VERSION_ADDR 34 - -// Dynamic keymap starts after EEPROM version -#define DYNAMIC_KEYMAP_EEPROM_ADDR 35 -// Dynamic macro starts after dynamic keymaps (35+(4*10*2)) = (35+80) -#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 115 -#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 909 -#define DYNAMIC_KEYMAP_MACRO_COUNT 16 - -#endif diff --git a/keyboards/rama/m10_b/info.json b/keyboards/rama/m10_b/info.json deleted file mode 100644 index fb144030d0..0000000000 --- a/keyboards/rama/m10_b/info.json +++ /dev/null @@ -1,23 +0,0 @@ -{ - "keyboard_name": "m10-b", - "url": "", - "maintainer": "qmk", - "width": 3, - "height": 4, - "layouts": { - "LAYOUT": { - "layout": [ - { "x": 0, "y": 0 }, - { "x": 1, "y": 0 }, - { "x": 2, "y": 0 }, - { "x": 0, "y": 1 }, - { "x": 1, "y": 1 }, - { "x": 2, "y": 1 }, - { "x": 0, "y": 2 }, - { "x": 1, "y": 2 }, - { "x": 2, "y": 2 }, - { "x": 1, "y": 3, "w": 2.0 } - ] - } - } -} diff --git a/keyboards/rama/m10_b/keymaps/default/config.h b/keyboards/rama/m10_b/keymaps/default/config.h deleted file mode 100644 index 2a3bf1819f..0000000000 --- a/keyboards/rama/m10_b/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2018 Wilba - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -// place overrides here diff --git a/keyboards/rama/m10_b/keymaps/default/keymap.c b/keyboards/rama/m10_b/keymaps/default/keymap.c deleted file mode 100644 index c307bcb2a7..0000000000 --- a/keyboards/rama/m10_b/keymaps/default/keymap.c +++ /dev/null @@ -1,8 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - LAYOUT( - KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_0 ) - -}; diff --git a/keyboards/rama/m10_b/keymaps/default/readme.md b/keyboards/rama/m10_b/keymaps/default/readme.md deleted file mode 100644 index 3b3d6c3970..0000000000 --- a/keyboards/rama/m10_b/keymaps/default/readme.md +++ /dev/null @@ -1,7 +0,0 @@ - - -# Default RAMA M10-B Layout - -This is an example layout. - - diff --git a/keyboards/rama/m10_b/keymaps/knops/config.h b/keyboards/rama/m10_b/keymaps/knops/config.h deleted file mode 100644 index 7c3ec9601d..0000000000 --- a/keyboards/rama/m10_b/keymaps/knops/config.h +++ /dev/null @@ -1,25 +0,0 @@ -/* Copyright 2018 Wilba - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -#undef RAW_ENABLE -#undef DYNAMIC_KEYMAP_ENABLE - -#endif diff --git a/keyboards/rama/m10_b/keymaps/knops/keymap.c b/keyboards/rama/m10_b/keymaps/knops/keymap.c deleted file mode 100644 index b90ca686fb..0000000000 --- a/keyboards/rama/m10_b/keymaps/knops/keymap.c +++ /dev/null @@ -1,64 +0,0 @@ -#include QMK_KEYBOARD_H - -/*KNOPS_MISC*/ - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /*KNOPS_LAYOUT*/ - -}; - -// M10-B LEDs are all in parallel and controlled by the QMK backlight -// functionality. LED functions here are for possible future use -// as layer indicators, etc. and not implemented yet. -// -// To implement LED functions here, QMK backlight functionality -// will need to be disabled either via rules.mk or config.h -// or overriding the backlight functions to do nothing. -// -// LEDs are driven by a transistor connected to pin C6. -// - -void set_led_state(int ledId, bool state) -{ -} - -void led_init_ports() -{ -} - -void led_set_layer(int layer) -{ - led_init_ports(); - - led_set_layer(0); - - /*KNOPS_SIMPLELED_STATES*/ -} - -void matrix_init_user(void) -{ - /*KNOPS_INIT*/ -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - /*KNOPS_MACRO*/ - return NULL; -} - -void matrix_scan_user(void) -{ - /*KNOPS_SCAN*/ -} - -void led_set_user(uint8_t usb_led) -{ - /*KNOPS_FUNCTIONALLED_STATES*/ -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) -{ - /*KNOPS_PROCESS_STATE*/ - return NULL; -} diff --git a/keyboards/rama/m10_b/keymaps/knops/readme.md b/keyboards/rama/m10_b/keymaps/knops/readme.md deleted file mode 100644 index 3b3d6c3970..0000000000 --- a/keyboards/rama/m10_b/keymaps/knops/readme.md +++ /dev/null @@ -1,7 +0,0 @@ - - -# Default RAMA M10-B Layout - -This is an example layout. - - diff --git a/keyboards/rama/m10_b/m10_b.c b/keyboards/rama/m10_b/m10_b.c deleted file mode 100644 index ccff6d62c9..0000000000 --- a/keyboards/rama/m10_b/m10_b.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -// Nothing to see here, move along... ;-) diff --git a/keyboards/rama/m10_b/m10_b.h b/keyboards/rama/m10_b/m10_b.h deleted file mode 100644 index d55ad598ca..0000000000 --- a/keyboards/rama/m10_b/m10_b.h +++ /dev/null @@ -1,29 +0,0 @@ -/* Copyright 2018 Wilba - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "quantum.h" - -#ifndef RAMA_M10_B_H -#define RAMA_M10_B_H - -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define LAYOUT( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 ) \ - { \ - {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09}, \ - } -#endif // RAMA_M10_B diff --git a/keyboards/rama/m10_b/readme.md b/keyboards/rama/m10_b/readme.md deleted file mode 100644 index 9facb5cd34..0000000000 --- a/keyboards/rama/m10_b/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# RAMA M10-B - - - -Mechanical Mini Pad. [More info at Massdrop](https://www.massdrop.com/buy/rama-m10-a) - -Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582) -Hardware Supported: RAMA M10-B PCB -Hardware Availability: [Massdrop](https://www.massdrop.com/buy/rama-m10-a) - -Make example for this keyboard (after setting up your build environment): - - make rama/m10_b:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
\ No newline at end of file diff --git a/keyboards/rama/m10_b/rules.mk b/keyboards/rama/m10_b/rules.mk deleted file mode 100644 index 70258b9ead..0000000000 --- a/keyboards/rama/m10_b/rules.mk +++ /dev/null @@ -1,68 +0,0 @@ -# project specific files -SRC = keyboards/wilba_tech/wt_main.c - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section -BOOTLOADER = atmel-dfu - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches - -RAW_ENABLE = yes -DYNAMIC_KEYMAP_ENABLE = yes diff --git a/keyboards/rama/m60_a/config.h b/keyboards/rama/m60_a/config.h deleted file mode 100644 index b3e9162311..0000000000 --- a/keyboards/rama/m60_a/config.h +++ /dev/null @@ -1,139 +0,0 @@ -/* Copyright 2017 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#include "config_common.h" - -// USB Device descriptor parameter -#define VENDOR_ID 0x5241 // "RW" -#define PRODUCT_ID 0x060A // 60-A -#define DEVICE_VER 0x0001 -#define MANUFACTURER RAMA.WORKS -#define PRODUCT RAMA M60-A -#define DESCRIPTION RAMA M60-A Keyboard - -// key matrix size -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -// M60-A PCB default pin-out -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } -#define UNUSED_PINS - -// IS31FL3731 driver -#define DRIVER_COUNT 2 -#define DRIVER_LED_TOTAL 72 - -// COL2ROW or ROW2COL -#define DIODE_DIRECTION COL2ROW - -// Set 0 if debouncing isn't needed -#define DEBOUNCE 5 - -// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap -#define LOCKING_SUPPORT_ENABLE -// Locking resynchronize hack -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -// disable debug print -//#define NO_DEBUG - -// disable print -//#define NO_PRINT - -// disable action features -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#define RGB_BACKLIGHT_ENABLED 1 - -// This conditionally compiles the backlight code for M60-A specifics -#define RGB_BACKLIGHT_M60_A - -// enable/disable LEDs based on layout -// they aren't really used if RGB_BACKLIGHT_M60_A defined -#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1 -#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 -#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1 -#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1 -#define RGB_BACKLIGHT_USE_ISO_ENTER 0 -#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 1 - -// disable backlight when USB suspended (PC sleep/hibernate/shutdown) -#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0 - -// disable backlight after timeout in minutes, 0 = no timeout -#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 - -// the default brightness -#define RGB_BACKLIGHT_BRIGHTNESS 255 - -// the default effect (RGB test) -#define RGB_BACKLIGHT_EFFECT 255 - -// the default effect speed (0-3) -#define RGB_BACKLIGHT_EFFECT_SPEED 0 - -// the default color1 and color2 -#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } -#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } - -// These define which keys in the matrix are alphas/mods -// Used for backlight effects so colors are different for -// alphas vs. mods -// Each value is for a row, bit 0 is column 0 -// Alpha=0 Mod=1 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0010000000000001 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111 - -#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } -#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } -#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } -#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } - -#define DYNAMIC_KEYMAP_LAYER_COUNT 4 - -// EEPROM usage - -// TODO: refactor with new user EEPROM code (coming soon) -#define EEPROM_MAGIC 0x451F -#define EEPROM_MAGIC_ADDR 32 -// Bump this every time we change what we store -// This will automatically reset the EEPROM with defaults -// and avoid loading invalid data from the EEPROM -#define EEPROM_VERSION 0x08 -#define EEPROM_VERSION_ADDR 34 - -// Backlight config starts after EEPROM version -#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35 -// Dynamic keymap starts after backlight config (35+31) -#define DYNAMIC_KEYMAP_EEPROM_ADDR 66 -// Dynamic macro starts after dynamic keymaps (66+(4*5*14*2)) = (66+560) -#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 626 -#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 398 -#define DYNAMIC_KEYMAP_MACRO_COUNT 16 diff --git a/keyboards/rama/m60_a/info.json b/keyboards/rama/m60_a/info.json deleted file mode 100644 index 577becd219..0000000000 --- a/keyboards/rama/m60_a/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "M60-A", - "url": "", - "maintainer": "Wilba", - "bootloader": "DFU", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT_60_hhkb": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}] - } - } -}
\ No newline at end of file diff --git a/keyboards/rama/m60_a/keymaps/default/keymap.c b/keyboards/rama/m60_a/keymaps/default/keymap.c deleted file mode 100644 index 7b6d9b756c..0000000000 --- a/keyboards/rama/m60_a/keymaps/default/keymap.c +++ /dev/null @@ -1,40 +0,0 @@ -// M60-A layout -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -// Default layer -[0] = LAYOUT_60_hhkb( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN_MO13, - KC_LGUI, KC_LALT, KC_SPC, KC_RALT, FN_MO23), - -// Fn1 Layer -[1] = LAYOUT_60_hhkb( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, - KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, - KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - -// Fn2 Layer -[2] = LAYOUT_60_hhkb( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - -// Fn3 Layer (zeal60 Configuration) -[3] = LAYOUT_60_hhkb( - KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - -}; - - diff --git a/keyboards/rama/m60_a/keymaps/proto/config.h b/keyboards/rama/m60_a/keymaps/proto/config.h deleted file mode 100644 index 54a185ff19..0000000000 --- a/keyboards/rama/m60_a/keymaps/proto/config.h +++ /dev/null @@ -1,5 +0,0 @@ -#pragma once - -// This fixes the diodes mounted reversed (fab fail) on M60-A prototype -#undef DIODE_DIRECTION -#define DIODE_DIRECTION ROW2COL diff --git a/keyboards/rama/m60_a/keymaps/proto/keymap.c b/keyboards/rama/m60_a/keymaps/proto/keymap.c deleted file mode 100644 index 7b6d9b756c..0000000000 --- a/keyboards/rama/m60_a/keymaps/proto/keymap.c +++ /dev/null @@ -1,40 +0,0 @@ -// M60-A layout -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -// Default layer -[0] = LAYOUT_60_hhkb( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN_MO13, - KC_LGUI, KC_LALT, KC_SPC, KC_RALT, FN_MO23), - -// Fn1 Layer -[1] = LAYOUT_60_hhkb( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, - KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, - KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - -// Fn2 Layer -[2] = LAYOUT_60_hhkb( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - -// Fn3 Layer (zeal60 Configuration) -[3] = LAYOUT_60_hhkb( - KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - -}; - - diff --git a/keyboards/rama/m60_a/m60_a.c b/keyboards/rama/m60_a/m60_a.c deleted file mode 100644 index 80a98460d8..0000000000 --- a/keyboards/rama/m60_a/m60_a.c +++ /dev/null @@ -1,18 +0,0 @@ -/* Copyright 2017 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#ifndef RGB_BACKLIGHT_M60_A -#error RGB_BACKLIGHT_M60_A not defined, you done goofed somehao, brah -#endif diff --git a/keyboards/rama/m60_a/m60_a.h b/keyboards/rama/m60_a/m60_a.h deleted file mode 100644 index 3caab6ac0f..0000000000 --- a/keyboards/rama/m60_a/m60_a.h +++ /dev/null @@ -1,37 +0,0 @@ -/* Copyright 2017 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#include "quantum.h" -#include "../../zeal60/rgb_backlight_keycodes.h" -#include "../../zeal60/zeal60_keycodes.h" - -#define XXX KC_NO - -#define LAYOUT_60_hhkb( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ - K41, K42, K47, K4B, K4C \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ - { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ - { XXX, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, XXX, K4B, K4C, XXX } \ -} - diff --git a/keyboards/rama/m60_a/readme.md b/keyboards/rama/m60_a/readme.md deleted file mode 100644 index fe54f0163a..0000000000 --- a/keyboards/rama/m60_a/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# RAMA M60-A - - - -The M60-A represents the benchmark and equilibrium between function and design for us at Rama Works. The gently exaggerated design of the frame is not understated, but rather provocative. Inspiration and evolution from previous models are evident in the beautifully articulated design and the well defined aesthetic, the fingerprint of our 'Industrial Modern' designs. The M60-A offers a unique contender in the traditional 60% form factor. [More info at RAMA WORKS](https://rama.works/m60-a/) - -Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582) -Hardware Supported: RAMA M60-A PCB -Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/) - -Make example for this keyboard (after setting up your build environment): - - make rama/m60_a:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/rama/m60_a/rules.mk b/keyboards/rama/m60_a/rules.mk deleted file mode 100644 index 09ed03e951..0000000000 --- a/keyboards/rama/m60_a/rules.mk +++ /dev/null @@ -1,80 +0,0 @@ - - -# project specific files -SRC = keyboards/zeal60/zeal60.c \ - keyboards/zeal60/rgb_backlight.c \ - quantum/color.c \ - drivers/issi/is31fl3731.c \ - drivers/avr/i2c_master.c - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section -BOOTLOADER = atmel-dfu - -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DNO_SUSPEND_POWER_DOWN - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -RAW_ENABLE = yes -DYNAMIC_KEYMAP_ENABLE = yes -CIE1931_CURVE = yes - -LAYOUTS = 60_hhkb diff --git a/keyboards/rama/m6_a/config.h b/keyboards/rama/m6_a/config.h deleted file mode 100644 index 341e29b958..0000000000 --- a/keyboards/rama/m6_a/config.h +++ /dev/null @@ -1,129 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x5241 // "RW" -#define PRODUCT_ID 0x006A // 6-A -#define DEVICE_VER 0x0001 -#define MANUFACTURER RAMA.WORKS -#define PRODUCT RAMA M6-A -#define DESCRIPTION RAMA M6-A Macropad - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 6 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { E6 } -#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -#define RGB_BACKLIGHT_ENABLED 0 - -#define DYNAMIC_KEYMAP_LAYER_COUNT 4 - -// EEPROM usage - -// TODO: refactor with new user EEPROM code (coming soon) -#define EEPROM_MAGIC 0x451F -#define EEPROM_MAGIC_ADDR 32 -// Bump this every time we change what we store -// This will automatically reset the EEPROM with defaults -// and avoid loading invalid data from the EEPROM -#define EEPROM_VERSION 0x08 -#define EEPROM_VERSION_ADDR 34 - -// NOTE: M6-A doesn't use RGB backlight, but we keep this -// consistent with M6-B which does. - -// Backlight config starts after EEPROM version -#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35 -// Dynamic keymap starts after backlight config (35+43) -#define DYNAMIC_KEYMAP_EEPROM_ADDR 78 -// Dynamic macro starts after dynamic keymaps (78+(4*6*2)) = (78+48) -#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 126 -#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 898 -#define DYNAMIC_KEYMAP_MACRO_COUNT 16 diff --git a/keyboards/rama/m6_a/info.json b/keyboards/rama/m6_a/info.json deleted file mode 100644 index 28dd733dac..0000000000 --- a/keyboards/rama/m6_a/info.json +++ /dev/null @@ -1,19 +0,0 @@ -{ - "keyboard_name": "m6-a", - "url": "", - "maintainer": "qmk", - "width": 3, - "height": 2, - "layouts": { - "LAYOUT": { - "layout": [ - { "x": 0, "y": 0 }, - { "x": 1, "y": 0 }, - { "x": 2, "y": 0 }, - { "x": 0, "y": 1 }, - { "x": 1, "y": 1 }, - { "x": 2, "y": 1 } - ] - } - } -} diff --git a/keyboards/rama/m6_a/keymaps/default/keymap.c b/keyboards/rama/m6_a/keymaps/default/keymap.c deleted file mode 100644 index 7a408fa8aa..0000000000 --- a/keyboards/rama/m6_a/keymaps/default/keymap.c +++ /dev/null @@ -1,16 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - LAYOUT( - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6), - - LAYOUT( - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO), - - LAYOUT( - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO), - - LAYOUT( - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO) }; - diff --git a/keyboards/rama/m6_a/keymaps/default/readme.md b/keyboards/rama/m6_a/keymaps/default/readme.md deleted file mode 100644 index c74b537a5a..0000000000 --- a/keyboards/rama/m6_a/keymaps/default/readme.md +++ /dev/null @@ -1,12 +0,0 @@ - - -# Default RAMA M6-A Layout - -This is an example layout to demonstrate layer toggling. - -The top left key will cycle through six layers. - -If LEDs are installed, one of the six LEDs will be on to indicate current layer. - -LEDs should be installed cathode pin on the square pad. - diff --git a/keyboards/rama/m6_a/keymaps/knops/config.h b/keyboards/rama/m6_a/keymaps/knops/config.h deleted file mode 100644 index 999d8876c2..0000000000 --- a/keyboards/rama/m6_a/keymaps/knops/config.h +++ /dev/null @@ -1,24 +0,0 @@ -/* Copyright 2017 Pawnerd - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif diff --git a/keyboards/rama/m6_a/keymaps/knops/keymap.c b/keyboards/rama/m6_a/keymaps/knops/keymap.c deleted file mode 100644 index d687fe8516..0000000000 --- a/keyboards/rama/m6_a/keymaps/knops/keymap.c +++ /dev/null @@ -1,129 +0,0 @@ -#include QMK_KEYBOARD_H - -/*KNOPS_MISC*/ - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /*KNOPS_LAYOUT*/ - -}; - -void set_led_state(int ledId, bool state) -{ - if (state) - { - switch (ledId) - { - case 0: - PORTD |= (1 << 6); - break; - case 1: - PORTB |= (1 << 6); - break; - case 2: - PORTF |= (1 << 5); - break; - case 3: - PORTB |= (1 << 4); - break; - case 4: - PORTC |= (1 << 7); - break; - case 5: - PORTF |= (1 << 7); - break; - } - } - else - { - switch (ledId) - { - case 0: - PORTD &= ~(1 << 6); - break; - case 1: - PORTB &= ~(1 << 6); - break; - case 2: - PORTF &= ~(1 << 5); - break; - case 3: - PORTB &= ~(1 << 4); - break; - case 4: - PORTC &= ~(1 << 7); - break; - case 5: - PORTF &= ~(1 << 7); - break; - } - } -} - -void led_init_ports() -{ - // Switch #1 - DDRD |= (1 << 6); - PORTD &= ~(1 << 6); - - // Switch #2 - DDRB |= (1 << 6); - PORTB &= ~(1 << 6); - - // Switch #3 - DDRF |= (1 << 5); - PORTF &= ~(1 << 5); - - // Switch #4 - DDRB |= (1 << 4); - PORTB &= ~(1 << 4); - - // Switch #5 - DDRC |= (1 << 7); - PORTC &= ~(1 << 7); - - // Switch #6 - DDRF |= (1 << 7); - PORTF &= ~(1 << 7); -} - -void led_set_layer(int layer) -{ - - /*KNOPS_SIMPLELED_STATES*/ -} - -void matrix_init_user(void) -{ - led_init_ports(); - - led_set_layer(0); - - /*KNOPS_INIT*/ -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - //keyevent_t event = record->event; - - /*KNOPS_MACRO*/ - return NULL; -} - -void matrix_scan_user(void) -{ - /*KNOPS_SCAN*/ -} - -void led_set_user(uint8_t usb_led) -{ - - /*KNOPS_FUNCTIONALLED_STATES*/ -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) -{ - - /*KNOPS_PROCESS_STATE*/ - return NULL; -} diff --git a/keyboards/rama/m6_a/keymaps/knops/readme.md b/keyboards/rama/m6_a/keymaps/knops/readme.md deleted file mode 100644 index 58696974ed..0000000000 --- a/keyboards/rama/m6_a/keymaps/knops/readme.md +++ /dev/null @@ -1,11 +0,0 @@ -# Default Knops Mini Layout - - - - - -This is the keymap that our configurator uses to compile new keymaps and features. Here is a screenshot: - - - -As of 12th of february 2018, this tool has not yet been released to the public. You may have a look at our older tool, KBFlasher: [our (almost outdated) configurator tool](http://knops.io/configurator.html) for this.
\ No newline at end of file diff --git a/keyboards/rama/m6_a/keymaps/krusli/README.md b/keyboards/rama/m6_a/keymaps/krusli/README.md deleted file mode 100644 index 7c1fa38fcb..0000000000 --- a/keyboards/rama/m6_a/keymaps/krusli/README.md +++ /dev/null @@ -1,28 +0,0 @@ -# krusli's RAMA M6-A Layout - -Personal keymap for the RAMA M6-A. - -Keymap was from my own port for the M6-A before official support was added, thus the backlighting code is not ported yet from the official default keymap. - -Top-right button acts as a "toggle between layers" button. Layer 0 -> Layer 1 -> Layer 2 -> Layer 0 -> ... - -* Layer 0: Git and Discord shortcuts -* Layer 1: Media playback and volume controls -* Layer 2: Osu! gamepad layer - -## Helpful alternative keymaps (WIP) - -### Arrow cluster - -Use [karabiner-elements](https://github.com/tekezo/Karabiner-Elements) on macOS so that the state of the modifiers (shift, caps lock) are synchronised between keyboards (for shift + arrow key text selection, for example). It's also a handy tool for customising keyboard behaviour on a Mac. - -On Windows/Linux modifier state should be shared between all keyboards by default. - -Installation: install [homebrew](https://brew.sh) and run `brew install Caskroom/cask/karabiner-elements`. - -```C -LAYOUT( - KC_ESC, KC_UP, TO(_LAYER0), - KC_LEFT, KC_DOWN, KC_RIGHT -) -``` diff --git a/keyboards/rama/m6_a/keymaps/krusli/keymap.c b/keyboards/rama/m6_a/keymaps/krusli/keymap.c deleted file mode 100644 index 410229ae47..0000000000 --- a/keyboards/rama/m6_a/keymaps/krusli/keymap.c +++ /dev/null @@ -1,71 +0,0 @@ -#include QMK_KEYBOARD_H -#include "action_layer.h" -#include "eeconfig.h" - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. - -enum layers -{ - _LAYER0, - _LAYER1, - _LAYER2 -}; - -enum custom_keycodes -{ - GIT_ADD = SAFE_RANGE, - GIT_COMMIT, - GIT_PUSH, - MUTE, - DEAFEN -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) -{ - if (record->event.pressed) - { - switch (keycode) - { - case GIT_ADD: - SEND_STRING("git add ." SS_TAP(X_ENTER)); - break; - case GIT_COMMIT: - SEND_STRING("git commit -m " SS_DOWN(X_LSHIFT) SS_TAP(X_QUOTE) SS_UP(X_LSHIFT)); - break; - case GIT_PUSH: - SEND_STRING("git push" SS_TAP(X_ENTER)); - break; - case MUTE: - SEND_STRING(SS_LGUI(SS_LSFT("M"))); - break; - case DEAFEN: - SEND_STRING(SS_LGUI(SS_LSFT("D"))); - break; - return false; - } - } - return true; -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_LAYER0] = LAYOUT( - MUTE, DEAFEN, TO(_LAYER1), - GIT_ADD, GIT_COMMIT, GIT_PUSH), - [_LAYER1] = LAYOUT( - KC_VOLD, KC_VOLU, TO(_LAYER2), - KC_MRWD, KC_MPLY, KC_MNXT), - [_LAYER2] = LAYOUT( - KC_ESC, KC_UP, TO(_LAYER0), - KC_Z, KC_X, KC_SPACE)}; - -void matrix_init_user(void) -{ -#ifdef BACKLIGHT_ENABLE - backlight_level(0); -#endif -} diff --git a/keyboards/rama/m6_a/keymaps/naut/config.h b/keyboards/rama/m6_a/keymaps/naut/config.h deleted file mode 100644 index 7f642203aa..0000000000 --- a/keyboards/rama/m6_a/keymaps/naut/config.h +++ /dev/null @@ -1,24 +0,0 @@ -/* Copyright 2018 Wilba - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif
\ No newline at end of file diff --git a/keyboards/rama/m6_a/keymaps/naut/keymap.c b/keyboards/rama/m6_a/keymaps/naut/keymap.c deleted file mode 100644 index df4cf9be37..0000000000 --- a/keyboards/rama/m6_a/keymaps/naut/keymap.c +++ /dev/null @@ -1,17 +0,0 @@ -#include QMK_KEYBOARD_H - -// Define Layers -#define _BASE 0 -#define _FNX 1 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - // Base Layer - [_BASE] = LAYOUT( - TO(1), KC_UP, KC_PGDN, - KC_LEFT, KC_DOWN, KC_RGHT), - - // Fn Layer - [_FNX] = LAYOUT( - TO(0), KC_VOLU, KC_MPLY, - KC_MRWD, KC_VOLD, KC_MFFD)};
\ No newline at end of file diff --git a/keyboards/rama/m6_a/keymaps/naut/readme.md b/keyboards/rama/m6_a/keymaps/naut/readme.md deleted file mode 100644 index 2166e37831..0000000000 --- a/keyboards/rama/m6_a/keymaps/naut/readme.md +++ /dev/null @@ -1,10 +0,0 @@ -Naut's Keymap -======= - -Arrows for HHKB and Media keys for M65-A. - -Keymap Maintainer: [Jason Barnachea](https://github.com/nautxx) - -Difference from base layout: Similar. - -Intended usage: Arrows and Media Keys. diff --git a/keyboards/rama/m6_a/m6_a.c b/keyboards/rama/m6_a/m6_a.c deleted file mode 100644 index fa19003600..0000000000 --- a/keyboards/rama/m6_a/m6_a.c +++ /dev/null @@ -1,15 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ diff --git a/keyboards/rama/m6_a/m6_a.h b/keyboards/rama/m6_a/m6_a.h deleted file mode 100644 index d3c7bad332..0000000000 --- a/keyboards/rama/m6_a/m6_a.h +++ /dev/null @@ -1,29 +0,0 @@ -/* Copyright 2018 Wilba - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "quantum.h" - -#ifndef RAMA_M6_A_H -#define RAMA_M6_A_H - -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define LAYOUT( \ - K00, K01, K02, K03, K04, K05) \ - { \ - {K00, K01, K02, K03, K04, K05}, \ - } -#endif // RAMA_M6_A diff --git a/keyboards/rama/m6_a/readme.md b/keyboards/rama/m6_a/readme.md deleted file mode 100644 index ceaf6a88de..0000000000 --- a/keyboards/rama/m6_a/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# RAMA M6-A - - - -A 6-key companion keyboard. [More info at RAMA WORKS](https://rama.works/m6a) - -Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582) -Hardware Supported: RAMA M6-A PCB -Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/) - -Make example for this keyboard (after setting up your build environment): - - make rama/m6_a:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/rama/m6_a/rules.mk b/keyboards/rama/m6_a/rules.mk deleted file mode 100644 index 399e9e80d6..0000000000 --- a/keyboards/rama/m6_a/rules.mk +++ /dev/null @@ -1,74 +0,0 @@ -# project specific files -SRC = keyboards/zeal60/zeal60.c - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section -BOOTLOADER = atmel-dfu - -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DNO_SUSPEND_POWER_DOWN - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -RAW_ENABLE = yes -DYNAMIC_KEYMAP_ENABLE = yes -CIE1931_CURVE = no - diff --git a/keyboards/rama/m6_b/config.h b/keyboards/rama/m6_b/config.h deleted file mode 100644 index 015bc6df8a..0000000000 --- a/keyboards/rama/m6_b/config.h +++ /dev/null @@ -1,172 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x5241 // "RW" -#define PRODUCT_ID 0x006B // 6-B -#define DEVICE_VER 0x0001 -#define MANUFACTURER RAMA.WORKS -#define PRODUCT RAMA M6-B -#define DESCRIPTION RAMA M6-B Macropad - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 6 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { E6 } -#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -#define RGB_BACKLIGHT_ENABLED 1 - -// This conditionally compiles the backlight code for M6-B specifics -#define RGB_BACKLIGHT_M6_B - -// enable/disable LEDs based on layout -#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0 -#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 -#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0 -#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0 -#define RGB_BACKLIGHT_USE_ISO_ENTER 0 -#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0 - -// disable backlight when USB suspended (PC sleep/hibernate/shutdown) -#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0 - -// disable backlight after timeout in minutes, 0 = no timeout -#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 - -// the default brightness -#define RGB_BACKLIGHT_BRIGHTNESS 255 - -// the default effect (RGB test) -#define RGB_BACKLIGHT_EFFECT 255 - -// the default effect speed (0-3) -#define RGB_BACKLIGHT_EFFECT_SPEED 0 - -// the default color1 and color2 -#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } -#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } - -// These define which keys in the matrix are alphas/mods -// Used for backlight effects so colors are different for -// alphas vs. mods -// Each value is for a row, bit 0 is column 0 -// Alpha=0 Mod=1 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0 -#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0 - -#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } -#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } -#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } -#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } - -#define DYNAMIC_KEYMAP_LAYER_COUNT 4 - -// EEPROM usage - -// TODO: refactor with new user EEPROM code (coming soon) -#define EEPROM_MAGIC 0x451F -#define EEPROM_MAGIC_ADDR 32 -// Bump this every time we change what we store -// This will automatically reset the EEPROM with defaults -// and avoid loading invalid data from the EEPROM -#define EEPROM_VERSION 0x08 -#define EEPROM_VERSION_ADDR 34 - -// Backlight config starts after EEPROM version -#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35 -// Dynamic keymap starts after backlight config (35+43) -#define DYNAMIC_KEYMAP_EEPROM_ADDR 78 -// Dynamic macro starts after dynamic keymaps (78+(4*6*2)) = (78+48) -#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 126 -#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 898 -#define DYNAMIC_KEYMAP_MACRO_COUNT 16 diff --git a/keyboards/rama/m6_b/info.json b/keyboards/rama/m6_b/info.json deleted file mode 100644 index c88a3cc618..0000000000 --- a/keyboards/rama/m6_b/info.json +++ /dev/null @@ -1,19 +0,0 @@ -{ - "keyboard_name": "m6-b", - "url": "", - "maintainer": "qmk", - "width": 3, - "height": 2, - "layouts": { - "LAYOUT": { - "layout": [ - { "x": 0, "y": 0 }, - { "x": 1, "y": 0 }, - { "x": 2, "y": 0 }, - { "x": 0, "y": 1 }, - { "x": 1, "y": 1 }, - { "x": 2, "y": 1 } - ] - } - } -} diff --git a/keyboards/rama/m6_b/keymaps/default/keymap.c b/keyboards/rama/m6_b/keymaps/default/keymap.c deleted file mode 100644 index 7a408fa8aa..0000000000 --- a/keyboards/rama/m6_b/keymaps/default/keymap.c +++ /dev/null @@ -1,16 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - LAYOUT( - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6), - - LAYOUT( - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO), - - LAYOUT( - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO), - - LAYOUT( - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO) }; - diff --git a/keyboards/rama/m6_b/m6_b.c b/keyboards/rama/m6_b/m6_b.c deleted file mode 100644 index 581b31d753..0000000000 --- a/keyboards/rama/m6_b/m6_b.c +++ /dev/null @@ -1,18 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#ifndef RGB_BACKLIGHT_M6_B -#error RGB_BACKLIGHT_M6_B not defined, you done goofed somehao, brah -#endif diff --git a/keyboards/rama/m6_b/m6_b.h b/keyboards/rama/m6_b/m6_b.h deleted file mode 100644 index bd4158bcb1..0000000000 --- a/keyboards/rama/m6_b/m6_b.h +++ /dev/null @@ -1,28 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define LAYOUT( \ - K00, K01, K02, K03, K04, K05) \ - { \ - {K00, K01, K02, K03, K04, K05}, \ - } - diff --git a/keyboards/rama/m6_b/readme.md b/keyboards/rama/m6_b/readme.md deleted file mode 100644 index d6bdd0c4c2..0000000000 --- a/keyboards/rama/m6_b/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# RAMA M6-B - - - -A 6-key companion keyboard. [More info at RAMA WORKS](https://rama.works/m6a) - -Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582) -Hardware Supported: RAMA M6-B PCB -Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/) - -Make example for this keyboard (after setting up your build environment): - - make rama/m6_b:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/rama/m6_b/rules.mk b/keyboards/rama/m6_b/rules.mk deleted file mode 100644 index b7a76b8ddd..0000000000 --- a/keyboards/rama/m6_b/rules.mk +++ /dev/null @@ -1,79 +0,0 @@ -# project specific files -SRC = keyboards/zeal60/zeal60.c \ - keyboards/zeal60/rgb_backlight.c \ - quantum/color.c \ - drivers/issi/is31fl3218.c \ - drivers/avr/i2c_master.c - - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section -BOOTLOADER = atmel-dfu - -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -OPT_DEFS += -DNO_SUSPEND_POWER_DOWN - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -RAW_ENABLE = yes -DYNAMIC_KEYMAP_ENABLE = yes -CIE1931_CURVE = yes - diff --git a/keyboards/rama/readme.md b/keyboards/rama/readme.md deleted file mode 100644 index c7ddf6d111..0000000000 --- a/keyboards/rama/readme.md +++ /dev/null @@ -1,11 +0,0 @@ -# RAMA - -Firmware for keyboards designed by [RAMA WORKS](https://rama.works) - -[RAMA M6-A](https://rama.works/m6a) - -[RAMA M60-A](https://rama.works/#/m60-a/) - -[RAMA U80-A](https://rama.works/#/tkl-a/) - -[RAMA M10-B](https://www.massdrop.com/buy/rama-m10-a?mode=guest_open) diff --git a/keyboards/rama/u80_a/config.h b/keyboards/rama/u80_a/config.h deleted file mode 100644 index 44d9e21333..0000000000 --- a/keyboards/rama/u80_a/config.h +++ /dev/null @@ -1,202 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x5241 // "RW" -#define PRODUCT_ID 0x080A // 80-A -#define DEVICE_VER 0x0001 -#define MANUFACTURER RAMA.WORKS -#define PRODUCT RAMA U80-A -#define DESCRIPTION RAMA U80-A Keyboard - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 17 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -#define WT_MONO_BACKLIGHT - -#define DYNAMIC_KEYMAP_LAYER_COUNT 4 - -// EEPROM usage - -// TODO: refactor with new user EEPROM code (coming soon) -#define EEPROM_MAGIC 0x451F -#define EEPROM_MAGIC_ADDR 32 -// Bump this every time we change what we store -// This will automatically reset the EEPROM with defaults -// and avoid loading invalid data from the EEPROM -#define EEPROM_VERSION 0x07 -#define EEPROM_VERSION_ADDR 34 - -// Dynamic keymap starts after EEPROM version -#define DYNAMIC_KEYMAP_EEPROM_ADDR 35 -// Dynamic macro starts after dynamic keymaps (35+(4*6*17*2)) = (35+816) -#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 851 -#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 173 -#define DYNAMIC_KEYMAP_MACRO_COUNT 16 diff --git a/keyboards/rama/u80_a/info.json b/keyboards/rama/u80_a/info.json deleted file mode 100644 index cb61c89b88..0000000000 --- a/keyboards/rama/u80_a/info.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "keyboard_name": "RAMA U80-A", - "url": "https://rama.works/#/tkl-a/", - "maintainer": "Wilba", - "bootloader": "atmel-dfu", - "width": 18.25, - "height": 6.5, - "layouts": { - "LAYOUT_all": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5}, {"x":14, "y":1.5}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}] - } - } -} diff --git a/keyboards/rama/u80_a/keymaps/default/keymap.c b/keyboards/rama/u80_a/keymaps/default/keymap.c deleted file mode 100644 index 036a57b689..0000000000 --- a/keyboards/rama/u80_a/keymaps/default/keymap.c +++ /dev/null @@ -1,37 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [0] = LAYOUT_all( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_TRNS, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - - [1] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - - [2] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - - [3] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), -}; - diff --git a/keyboards/rama/u80_a/readme.md b/keyboards/rama/u80_a/readme.md deleted file mode 100644 index c98d00cb6b..0000000000 --- a/keyboards/rama/u80_a/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# RAMA U80-A - - - -A TKL keyboard. [More info at RAMA WORKS](https://rama.works/#/tkl-a/) - -Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582) -Hardware Supported: RAMA U80-A PCB -Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/) - -Make example for this keyboard (after setting up your build environment): - - make rama/u80_a:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/rama/u80_a/rules.mk b/keyboards/rama/u80_a/rules.mk deleted file mode 100644 index 54479529be..0000000000 --- a/keyboards/rama/u80_a/rules.mk +++ /dev/null @@ -1,71 +0,0 @@ -# project specific files -SRC = drivers/issi/is31fl3736.c \ - drivers/avr/i2c_master.c \ - keyboards/wilba_tech/wt_mono_backlight.c \ - keyboards/wilba_tech/wt_main.c - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section -BOOTLOADER = atmel-dfu - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches - -RAW_ENABLE = yes -DYNAMIC_KEYMAP_ENABLE = yes diff --git a/keyboards/rama/u80_a/u80_a.c b/keyboards/rama/u80_a/u80_a.c deleted file mode 100644 index ccff6d62c9..0000000000 --- a/keyboards/rama/u80_a/u80_a.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -// Nothing to see here, move along... ;-) diff --git a/keyboards/rama/u80_a/u80_a.h b/keyboards/rama/u80_a/u80_a.h deleted file mode 100644 index 26403ef347..0000000000 --- a/keyboards/rama/u80_a/u80_a.h +++ /dev/null @@ -1,43 +0,0 @@ -/* Copyright 2018 Jason Williams (Wilba) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "quantum.h" - -#define ____ KC_NO - -// Right switch of split backspace is at 3,13 and is the only switch -// whose physical position doesn't match switch matrix position :-( -// However, it also makes no sense to view the physical as 18 columns, -// so the numbering goes 00 to 16. Deal with it. - -#define LAYOUT_all( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K313, K114, K115, K116, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, \ - K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ - K500, K501, K502, K506, K510, K511, K512, K513, K514, K515, K516 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, ____, K014, K015, K016 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, ____, ____, ____ }, \ - { K400, ____, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, ____, K415, ____ }, \ - { K500, K501, K502, ____, ____, ____, K506, ____, ____, ____, K510, K511, K512, K513, K514, K515, K516 } \ -} - |