diff options
Diffstat (limited to 'keyboards/primekb/prime_e/keymaps/via')
| -rw-r--r-- | keyboards/primekb/prime_e/keymaps/via/keymap.c | 73 | ||||
| -rw-r--r-- | keyboards/primekb/prime_e/keymaps/via/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/primekb/prime_e/keymaps/via/rules.mk | 85 |
3 files changed, 160 insertions, 0 deletions
diff --git a/keyboards/primekb/prime_e/keymaps/via/keymap.c b/keyboards/primekb/prime_e/keymaps/via/keymap.c new file mode 100644 index 0000000000..9cc3e2f3d7 --- /dev/null +++ b/keyboards/primekb/prime_e/keymaps/via/keymap.c @@ -0,0 +1,73 @@ +/* Copyright 2018 Holten Campbell + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(1), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, + KC_LCTL, KC_LALT, KC_RBRC, MO(1), KC_SPC, KC_MINS, KC_LGUI, TO(1) + ) +}; + +void matrix_init_user(void) { + // set CapsLock LED to output and low + setPinOutput(B1); + writePinHigh(B1); + // set NumLock LED to output and low + setPinOutput(B2); + writePinHigh(B2); + // set ScrollLock LED to output and low + setPinOutput(B3); + writePinHigh(B3); +} + +void matrix_scan_user(void) { + +} + + +void led_set_user(uint8_t usb_led) { + if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { + writePinLow(B2); + } else { + writePinHigh(B2); + } + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + writePinLow(B1); + } else { + writePinHigh(B1); + } +/* + if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { + writePinLow(B3); + } else { + writePinHigh(B3); + }*/ + +} + +//function for layer indicator LED +uint32_t layer_state_set_user(uint32_t state) +{ + if (biton32(state) == 1) { + writePinLow(B3); + } else { + writePinHigh(B3); + } + return state; +} diff --git a/keyboards/primekb/prime_e/keymaps/via/readme.md b/keyboards/primekb/prime_e/keymaps/via/readme.md new file mode 100644 index 0000000000..bbd56c0cc7 --- /dev/null +++ b/keyboards/primekb/prime_e/keymaps/via/readme.md @@ -0,0 +1,2 @@ +# The VIA keymap for Prime_E +This keymap is for compatibility with the VIA configurator.
\ No newline at end of file diff --git a/keyboards/primekb/prime_e/keymaps/via/rules.mk b/keyboards/primekb/prime_e/keymaps/via/rules.mk new file mode 100644 index 0000000000..93b2e70e7c --- /dev/null +++ b/keyboards/primekb/prime_e/keymaps/via/rules.mk @@ -0,0 +1,85 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) + +# This is the VIA magic +RAW_ENABLE = yes +DYNAMIC_KEYMAP_ENABLE = yes +SRC += keyboards/wilba_tech/wt_main.c
\ No newline at end of file |