5 files changed, 16 insertions, 48 deletions
diff --git a/keyboards/preonic/rev3_drop/config.h b/keyboards/preonic/rev3_drop/config.h
index e136e01d64..4d1bfe67b9 100644
--- a/keyboards/preonic/rev3_drop/config.h
+++ b/keyboards/preonic/rev3_drop/config.h
@@ -17,20 +17,11 @@
 
 #pragma once
 
-#undef MATRIX_ROWS
-#undef MATRIX_COLS
-/* key matrix size */
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 6
-
 #undef MATRIX_ROW_PINS
 #undef MATRIX_COL_PINS
 #define MATRIX_ROW_PINS { A10, A9, A8, B15, C13, C14, C15, A2, A3, A6 }
 #define MATRIX_COL_PINS { B11, B10, B2, B1, A7, B0 }
 
-#define ENCODERS_PAD_A { B12 }
-#define ENCODERS_PAD_B { B13 }
-
 #define DIP_SWITCH_PINS { B14, A15, A0, B9 }
 
 #define MUSIC_MAP
@@ -40,35 +31,6 @@
 #define AUDIO_PIN_ALT A4
 #define AUDIO_PIN_ALT_AS_NEGATIVE
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-// #define DEBOUNCE 6
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/preonic/rev3_drop/info.json b/keyboards/preonic/rev3_drop/info.json
index 081d9e1983..3f32a10b36 100644
--- a/keyboards/preonic/rev3_drop/info.json
+++ b/keyboards/preonic/rev3_drop/info.json
@@ -6,6 +6,14 @@
         "pid": "0xA649",
         "device_version": "0.0.3"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "B12", "pin_b": "B13"}
+        ]
+    },
+    "processor": "STM32F303",
+    "bootloader": "stm32-dfu",
+    "community_layouts": ["ortho_5x12"],
     "layouts": {
         "LAYOUT_preonic_1x2uC": {
             "layout": [
diff --git a/keyboards/preonic/rev3_drop/matrix.c b/keyboards/preonic/rev3_drop/matrix.c
index 82214e03d9..60718caaba 100644
--- a/keyboards/preonic/rev3_drop/matrix.c
+++ b/keyboards/preonic/rev3_drop/matrix.c
@@ -17,6 +17,10 @@
 
 #include "quantum.h"
 
+#ifndef DEBOUNCE
+#    define DEBOUNCE 5
+#endif
+
 typedef uint16_t matrix_col_t;
 
 /*
@@ -67,7 +71,7 @@ void matrix_init(void) {
     memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
     memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_col_t));
 
-    matrix_init_quantum();
+    matrix_init_kb();
 }
 
 uint8_t matrix_scan(void) {
@@ -142,7 +146,7 @@ uint8_t matrix_scan(void) {
         debouncing = false;
     }
 
-    matrix_scan_quantum();
+    matrix_scan_kb();
 
     return 1;
 }
diff --git a/keyboards/preonic/rev3_drop/mcuconf.h b/keyboards/preonic/rev3_drop/mcuconf.h
index 838a3bb69e..32c615b3a2 100644
--- a/keyboards/preonic/rev3_drop/mcuconf.h
+++ b/keyboards/preonic/rev3_drop/mcuconf.h
@@ -14,6 +14,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#pragma once
+
 #include_next <mcuconf.h>
 
 // The SysTick timer from the normal quantum/stm32 uses TIM2 -- the WS2812 pin used
diff --git a/keyboards/preonic/rev3_drop/rules.mk b/keyboards/preonic/rev3_drop/rules.mk
index 3d0e376081..e3f9e52110 100644
--- a/keyboards/preonic/rev3_drop/rules.mk
+++ b/keyboards/preonic/rev3_drop/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = STM32F303
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
 # Build Options
 #   change yes to no to disable
 #
@@ -26,5 +20,3 @@ RGB_MATRIX_ENABLE = no
 RGB_MATRIX_DRIVER = WS2812
 
 SRC += matrix.c
-
-LAYOUTS = ortho_5x12