diff options
Diffstat (limited to 'keyboards/nyquist')
| -rw-r--r-- | keyboards/nyquist/eeprom-lefthand.eep | 2 | ||||
| -rw-r--r-- | keyboards/nyquist/eeprom-righthand.eep | 2 | ||||
| -rw-r--r-- | keyboards/nyquist/keymaps/333fred/Makefile | 7 | ||||
| -rw-r--r-- | keyboards/nyquist/keymaps/333fred/README.md | 75 | ||||
| -rw-r--r-- | keyboards/nyquist/keymaps/333fred/config.h | 14 | ||||
| -rw-r--r-- | keyboards/nyquist/keymaps/333fred/keymap.c | 135 | ||||
| -rw-r--r-- | keyboards/nyquist/keymaps/default/Makefile | 2 | ||||
| -rw-r--r-- | keyboards/nyquist/keymaps/default/config.h | 7 | ||||
| -rw-r--r-- | keyboards/nyquist/keymaps/default/keymap.c | 4 | ||||
| -rw-r--r-- | keyboards/nyquist/matrix.c | 242 | ||||
| -rw-r--r-- | keyboards/nyquist/pro_micro.h | 362 | ||||
| -rw-r--r-- | keyboards/nyquist/readme.md | 171 | ||||
| -rw-r--r-- | keyboards/nyquist/rules.mk | 12 | ||||
| -rw-r--r-- | keyboards/nyquist/split_util.c | 2 |
14 files changed, 455 insertions, 582 deletions
diff --git a/keyboards/nyquist/eeprom-lefthand.eep b/keyboards/nyquist/eeprom-lefthand.eep new file mode 100644 index 0000000000..b9666a74c0 --- /dev/null +++ b/keyboards/nyquist/eeprom-lefthand.eep @@ -0,0 +1,2 @@ +:0B0000000000000000000000000001F4
+:00000001FF
diff --git a/keyboards/nyquist/eeprom-righthand.eep b/keyboards/nyquist/eeprom-righthand.eep new file mode 100644 index 0000000000..94cc5be7fc --- /dev/null +++ b/keyboards/nyquist/eeprom-righthand.eep @@ -0,0 +1,2 @@ +:0B0000000000000000000000000000F5
+:00000001FF
diff --git a/keyboards/nyquist/keymaps/333fred/Makefile b/keyboards/nyquist/keymaps/333fred/Makefile new file mode 100644 index 0000000000..f854432807 --- /dev/null +++ b/keyboards/nyquist/keymaps/333fred/Makefile @@ -0,0 +1,7 @@ +KEY_LOCK_ENABLE = yes +NKRO_ENABLE = yes +CONSOLE_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/nyquist/keymaps/333fred/README.md b/keyboards/nyquist/keymaps/333fred/README.md new file mode 100644 index 0000000000..4276591415 --- /dev/null +++ b/keyboards/nyquist/keymaps/333fred/README.md @@ -0,0 +1,75 @@ +# 333fred's Nyquist Layout + +This nyquist layout is based on my Ergodox Infinity Layout, which is [here](../../../ergodox/keymaps/333fred/README.md). It doesn't have all of my VS extensions, as I have my nyquist at home, not at work. + +## Layers + +### QWERTY +The shift modifiers on this layer all use OSM to allow for quick single capitalization. Press and hold F to go to the VIM movement layer. Layer is also a one-shot layer toggle, and can be held down to type multiple characters on the Lower layer. Game is a regular toggle layer. + +``` +Qwerty +,-----------------------------------------------------------------------------------. +| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | +|------+------+------+------+------+------+------+------+------+------+------+------| +| Tab | Q | W | E | R | T | Y | U | I | O | P | \ | +|------+------+------+------+------+-------------+------+------+------+------+------| +| Esc | A | S | D |LTVIMF| G | H | J | K | L | ; | " | +|------+------+------+------+------+------|------+------+------+------+------+------| +| Shift| Z | X | C | V | B | N | M | , | . |/ Ctrl| Shift| +|------+------+------+------+------+------+------+------+------+------+------+------| +| Ctrl | Alt | F4 | GUI |Lower | Bksp | Spc | Ent | Lock | = | Game | Del | +`-----------------------------------------------------------------------------------' +``` + +### Lower +My symbol and numpad layer. APscr is a macro that sends ALT+PRSC, to take a screenshot of the current application. + +``` +Lower +,-----------------------------------------------------------------------------------. +| Caps | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | +|------+------+------+------+------+-------------+------+------+------+------+------| +| | ! | @ | ( | ) | | | 7 | 8 | 9 | * | ) | F12 | +|------+------+------+------+------+-------------+------+------+------+------+------| +| | # | $ | { | } | ` | 4 | 5 | 6 | + | } | | | +|------+------+------+------+------+------|------+------+------+------+------+------| +| APscr| % | ^ | [ | ] | ~ | 1 | 2 | 3 | \ | Vol- | Vol+ | +|------+------+------+------+------+------+------+------+------+------+------+------| +| Pscr | | | | | | 0 | . | = | Prev | Next | Play | +`-----------------------------------------------------------------------------------' +``` + +### VIM Movement +Pressing and holding F moves to this layer, which turns hjkl into vim movement keys. a and d are macros which send WIN+Left and WIN+Right, respectively. Shift and CTRL have been remapped for ease of selecting text. +``` +Vim Movement (Hold down F) +,-----------------------------------------------------------------------------------. +| | | | | | | | | | | | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | | | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| | DLeft|DRight| LCTRL| | | Left | Down | Up | Right| | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | | | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | LShft| | | | | | | | +`-----------------------------------------------------------------------------------' + ``` + +### Gaming +This layer is designed for playing games. All one-shot modification has been turned off, and the common game controls keys have been moved around for easier access. +``` +Gaming mode (Raise) +,-----------------------------------------------------------------------------------. +| ESC | | | | | | | | | | | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | | | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| CTRL | | | | F | | | | | | | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| Shift| Z | | | | | | | | | | | +|------+------+------+------+------+------+------+------+------+------+------+------| +| Enter| | Lock | | Alt | Spc | Lower| Left | Up | Down | Right|QWERTY| +`-----------------------------------------------------------------------------------' +``` diff --git a/keyboards/nyquist/keymaps/333fred/config.h b/keyboards/nyquist/keymaps/333fred/config.h new file mode 100644 index 0000000000..86fe521654 --- /dev/null +++ b/keyboards/nyquist/keymaps/333fred/config.h @@ -0,0 +1,14 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#define USE_SERIAL +#define MASTER_LEFT + +#undef TAPPING_TERM +#define TAPPING_TERM 150 + +#define PERMISSIVE_HOLD + +#endif diff --git a/keyboards/nyquist/keymaps/333fred/keymap.c b/keyboards/nyquist/keymaps/333fred/keymap.c new file mode 100644 index 0000000000..2edfeefe7b --- /dev/null +++ b/keyboards/nyquist/keymaps/333fred/keymap.c @@ -0,0 +1,135 @@ +#include "nyquist.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +#define _QWERTY 0 +#define _LOWER 1 +#define _VIM 2 +#define _GAME 3 + +enum custom_macros { + DLEFT, + DRIGHT, + PSCREEN_APP +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | \ | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D |LTVIMF| G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . |/ Ctrl| Shift| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | F4 | GUI |Lower | Bksp | Spc | Ent | Alt | + | Game | Del | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = KEYMAP( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLASH, \ + KC_ESC, KC_A, KC_S, KC_D, LT(_VIM, KC_F), KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + OSM(MOD_LSFT), LCTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RCTL_T(KC_SLSH), OSM(MOD_RSFT), \ + KC_LCTL, KC_LALT, KC_F4, KC_LGUI, OSL(_LOWER), KC_BSPC, KC_SPC, KC_ENT, KC_LOCK, KC_EQL, TG(_GAME), KC_DEL \ +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | ! | @ | ( | ) | | | 7 | 8 | 9 | * | ) | F12 | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | # | $ | { | } | ` | 4 | 5 | 6 | + | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | APscr| % | ^ | [ | ] | ~ | 1 | 2 | 3 | \ | Vol- | Vol+ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Pscr | | | | | | 0 | . | = | Prev | Next | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = KEYMAP( \ + KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, \ + _______, KC_EXLM, KC_AT, KC_LPRN, KC_RPRN, KC_PIPE, KC_7, KC_8, KC_9, KC_ASTR, KC_RPRN, KC_F12, \ + _______, KC_HASH, KC_DLR, KC_LCBR, KC_RCBR, KC_GRV, KC_4, KC_5, KC_6, KC_PLUS, KC_RCBR, KC_PIPE, \ + M(PSCREEN_APP), KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_1, KC_2, KC_3, KC_BSLS, KC_VOLD, KC_VOLU, \ + KC_PSCR, _______, _______, _______, _______, _______, KC_0, KC_DOT, KC_EQL, KC_MPRV, KC_MNXT, KC_MPLY \ +), + +/* Vim Movement (Hold down F) + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | DLeft|DRight| LCTRL| | | Left | Down | Up | Right| | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | LShft| | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_VIM] = KEYMAP( \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, M(DLEFT), M(DRIGHT), KC_LCTL, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, KC_LSFT, _______, _______, _______, _______, _______, _______, _______ \ +), + +/* Gaming mode (Raise) + * All one-shot mods are disabled on this layer + * ,-----------------------------------------------------------------------------------. + * | ESC | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | CTRL | | | | F | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Enter| | Lock | | Alt | Spc | Lower| Left | Up | Down | Right|QWERTY| + * `-----------------------------------------------------------------------------------' + */ +[_GAME] = KEYMAP( \ + KC_ESC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + KC_LCTL, _______, _______, _______, KC_F, _______, _______, _______, _______, _______, _______, _______, \ + KC_LSFT, KC_Z, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + KC_ENT, _______, KC_LOCK, _______, KC_LALT, KC_SPC, OSL(_LOWER), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, TO(_QWERTY) \ +) + +}; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch(id) { + case DLEFT: + if (record->event.pressed) { // Windows move desktop left + return MACRO(D(LCTL), D(LGUI), T(LEFT), U(LGUI), U(LCTL), END); + } + break; + case DRIGHT: + if (record->event.pressed) { // Windows move desktop right + return MACRO(D(LCTL), D(LGUI), T(RIGHT), U(LGUI), U(LCTL), END); + } + break; + case PSCREEN_APP: + if (record->event.pressed) { + return MACRO(D(LALT), T(PSCR), U(LALT), END); + } + break; + } + return MACRO_NONE; +} diff --git a/keyboards/nyquist/keymaps/default/Makefile b/keyboards/nyquist/keymaps/default/Makefile index 457a3d01d4..1e57612788 100644 --- a/keyboards/nyquist/keymaps/default/Makefile +++ b/keyboards/nyquist/keymaps/default/Makefile @@ -1,3 +1,5 @@ +RGBLIGHT_ENABLE = yes + ifndef QUANTUM_DIR include ../../../../Makefile endif diff --git a/keyboards/nyquist/keymaps/default/config.h b/keyboards/nyquist/keymaps/default/config.h index 624d284cac..072d4a7ce2 100644 --- a/keyboards/nyquist/keymaps/default/config.h +++ b/keyboards/nyquist/keymaps/default/config.h @@ -31,4 +31,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define _MASTER_RIGHT // #define EE_HANDS +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 12 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 + #endif
\ No newline at end of file diff --git a/keyboards/nyquist/keymaps/default/keymap.c b/keyboards/nyquist/keymaps/default/keymap.c index dcb68a6e06..97fee4e1e2 100644 --- a/keyboards/nyquist/keymaps/default/keymap.c +++ b/keyboards/nyquist/keymaps/default/keymap.c @@ -139,7 +139,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-----------------------------------------------------------------------------------. * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | Reset| | | | | | | | | | Del | + * | | Reset|RGB Tg|RGB Md|Hue Up|Hue Dn|Sat Up|Sat Dn|Val Up|Val Dn| | Del | * |------+------+------+------+------+-------------+------+------+------+------+------| * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | * |------+------+------+------+------+------|------+------+------+------+------+------| @@ -150,7 +150,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_ADJUST] = KEYMAP( \ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ - _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, RESET , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, KC_DEL, \ _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ diff --git a/keyboards/nyquist/matrix.c b/keyboards/nyquist/matrix.c index dcb94c67c8..21eef94564 100644 --- a/keyboards/nyquist/matrix.c +++ b/keyboards/nyquist/matrix.c @@ -21,9 +21,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include <stdint.h> #include <stdbool.h> #include <avr/io.h> -#include <avr/wdt.h> -#include <avr/interrupt.h> -#include <util/delay.h> +#include "wait.h" #include "print.h" #include "debug.h" #include "util.h" @@ -31,6 +29,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "split_util.h" #include "pro_micro.h" #include "config.h" +#include "timer.h" #ifdef USE_I2C # include "i2c.h" @@ -38,14 +37,29 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # include "serial.h" #endif -#ifndef DEBOUNCE -# define DEBOUNCE 5 +#ifndef DEBOUNCING_DELAY +# define DEBOUNCING_DELAY 5 #endif +#if (DEBOUNCING_DELAY > 0) + static uint16_t debouncing_time; + static bool debouncing = false; +#endif + +#if (MATRIX_COLS <= 8) +# define print_matrix_header() print("\nr/c 01234567\n") +# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop(matrix[i]) +# define ROW_SHIFTER ((uint8_t)1) +#else +# error "Currently only supports 8 COLS" +#endif +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + #define ERROR_DISCONNECT_COUNT 5 -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; +#define ROWS_PER_HAND (MATRIX_ROWS/2) + static uint8_t error_count = 0; static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; @@ -55,11 +69,19 @@ static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; static matrix_row_t matrix[MATRIX_ROWS]; static matrix_row_t matrix_debouncing[MATRIX_ROWS]; -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - +#if (DIODE_DIRECTION == COL2ROW) + static void init_cols(void); + static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row); + static void unselect_rows(void); + static void select_row(uint8_t row); + static void unselect_row(uint8_t row); +#elif (DIODE_DIRECTION == ROW2COL) + static void init_rows(void); + static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col); + static void unselect_cols(void); + static void unselect_col(uint8_t col); + static void select_col(uint8_t col); +#endif __attribute__ ((weak)) void matrix_init_quantum(void) { matrix_init_kb(); @@ -118,33 +140,54 @@ void matrix_init(void) } matrix_init_quantum(); + } uint8_t _matrix_scan(void) { - // Right hand is stored after the left in the matirx so, we need to offset it int offset = isLeftHand ? 0 : (ROWS_PER_HAND); +#if (DIODE_DIRECTION == COL2ROW) + // Set row, read cols + for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { +# if (DEBOUNCING_DELAY > 0) + bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); + + if (matrix_changed) { + debouncing = true; + debouncing_time = timer_read(); + PORTD ^= (1 << 2); + } + +# else + read_cols_on_row(matrix+offset, current_row); +# endif + + } + +#elif (DIODE_DIRECTION == ROW2COL) + // Set col, read rows + for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { +# if (DEBOUNCING_DELAY > 0) + bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); + if (matrix_changed) { + debouncing = true; + debouncing_time = timer_read(); + } +# else + read_rows_on_col(matrix+offset, current_col); +# endif - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); } +#endif - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { +# if (DEBOUNCING_DELAY > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { matrix[i+offset] = matrix_debouncing[i+offset]; } + debouncing = false; } - } +# endif return 1; } @@ -200,9 +243,7 @@ int serial_transaction(void) { uint8_t matrix_scan(void) { - int ret = _matrix_scan(); - - + uint8_t ret = _matrix_scan(); #ifdef USE_I2C if( i2c_transaction() ) { @@ -233,11 +274,10 @@ uint8_t matrix_scan(void) void matrix_slave_scan(void) { _matrix_scan(); - int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2); + int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; #ifdef USE_I2C for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ i2c_slave_buffer[i] = matrix[offset+i]; } #else // USE_SERIAL @@ -284,33 +324,141 @@ uint8_t matrix_key_count(void) return count; } -static void init_cols(void) +#if (DIODE_DIRECTION == COL2ROW) + +static void init_cols(void) { - for(int x = 0; x < MATRIX_COLS; x++) { - _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); + for(uint8_t x = 0; x < MATRIX_COLS; x++) { + uint8_t pin = col_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI } } -static matrix_row_t read_cols(void) +static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[current_row]; + + // Clear data in matrix row + current_matrix[current_row] = 0; + + // Select row and wait for row selecton to stabilize + select_row(current_row); + wait_us(30); + + // For each col... + for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { + + // Select the col pin to read (active low) + uint8_t pin = col_pins[col_index]; + uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF)); + + // Populate the matrix row with the state of the col pin + current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index); } - return result; + + // Unselect row + unselect_row(current_row); + + return (last_row_value != current_matrix[current_row]); +} + +static void select_row(uint8_t row) +{ + uint8_t pin = row_pins[row]; + _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT + _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW +} + +static void unselect_row(uint8_t row) +{ + uint8_t pin = row_pins[row]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI } static void unselect_rows(void) { - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); + for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { + uint8_t pin = row_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI } } -static void select_row(uint8_t row) +#elif (DIODE_DIRECTION == ROW2COL) + +static void init_rows(void) +{ + for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { + uint8_t pin = row_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI + } +} + +static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) +{ + bool matrix_changed = false; + + // Select col and wait for col selecton to stabilize + select_col(current_col); + wait_us(30); + + // For each row... + for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) + { + + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[row_index]; + + // Check row pin state + if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0) + { + // Pin LO, set col bit + current_matrix[row_index] |= (ROW_SHIFTER << current_col); + } + else + { + // Pin HI, clear col bit + current_matrix[row_index] &= ~(ROW_SHIFTER << current_col); + } + + // Determine if the matrix changed state + if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) + { + matrix_changed = true; + } + } + + // Unselect col + unselect_col(current_col); + + return matrix_changed; +} + +static void select_col(uint8_t col) +{ + uint8_t pin = col_pins[col]; + _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT + _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW +} + +static void unselect_col(uint8_t col) +{ + uint8_t pin = col_pins[col]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI +} + +static void unselect_cols(void) { - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); + for(uint8_t x = 0; x < MATRIX_COLS; x++) { + uint8_t pin = col_pins[x]; + _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN + _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI + } } + +#endif diff --git a/keyboards/nyquist/pro_micro.h b/keyboards/nyquist/pro_micro.h deleted file mode 100644 index f9e7ed75d9..0000000000 --- a/keyboards/nyquist/pro_micro.h +++ /dev/null @@ -1,362 +0,0 @@ -/* - pins_arduino.h - Pin definition functions for Arduino - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2007 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ -*/ - -#ifndef Pins_Arduino_h -#define Pins_Arduino_h - -#include <avr/pgmspace.h> - -// Workaround for wrong definitions in "iom32u4.h". -// This should be fixed in the AVR toolchain. -#undef UHCON -#undef UHINT -#undef UHIEN -#undef UHADDR -#undef UHFNUM -#undef UHFNUML -#undef UHFNUMH -#undef UHFLEN -#undef UPINRQX -#undef UPINTX -#undef UPNUM -#undef UPRST -#undef UPCONX -#undef UPCFG0X -#undef UPCFG1X -#undef UPSTAX -#undef UPCFG2X -#undef UPIENX -#undef UPDATX -#undef TCCR2A -#undef WGM20 -#undef WGM21 -#undef COM2B0 -#undef COM2B1 -#undef COM2A0 -#undef COM2A1 -#undef TCCR2B -#undef CS20 -#undef CS21 -#undef CS22 -#undef WGM22 -#undef FOC2B -#undef FOC2A -#undef TCNT2 -#undef TCNT2_0 -#undef TCNT2_1 -#undef TCNT2_2 -#undef TCNT2_3 -#undef TCNT2_4 -#undef TCNT2_5 -#undef TCNT2_6 -#undef TCNT2_7 -#undef OCR2A -#undef OCR2_0 -#undef OCR2_1 -#undef OCR2_2 -#undef OCR2_3 -#undef OCR2_4 -#undef OCR2_5 -#undef OCR2_6 -#undef OCR2_7 -#undef OCR2B -#undef OCR2_0 -#undef OCR2_1 -#undef OCR2_2 -#undef OCR2_3 -#undef OCR2_4 -#undef OCR2_5 -#undef OCR2_6 -#undef OCR2_7 - -#define NUM_DIGITAL_PINS 30 -#define NUM_ANALOG_INPUTS 12 - -#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) -#define TXLED0 PORTD |= (1<<5) -#define TXLED1 PORTD &= ~(1<<5) -#define RXLED0 PORTB |= (1<<0) -#define RXLED1 PORTB &= ~(1<<0) - -static const uint8_t SDA = 2; -static const uint8_t SCL = 3; -#define LED_BUILTIN 13 - -// Map SPI port to 'new' pins D14..D17 -static const uint8_t SS = 17; -static const uint8_t MOSI = 16; -static const uint8_t MISO = 14; -static const uint8_t SCK = 15; - -// Mapping of analog pins as digital I/O -// A6-A11 share with digital pins -static const uint8_t ADC0 = 18; -static const uint8_t ADC1 = 19; -static const uint8_t ADC2 = 20; -static const uint8_t ADC3 = 21; -static const uint8_t ADC4 = 22; -static const uint8_t ADC5 = 23; -static const uint8_t ADC6 = 24; // D4 -static const uint8_t ADC7 = 25; // D6 -static const uint8_t ADC8 = 26; // D8 -static const uint8_t ADC9 = 27; // D9 -static const uint8_t ADC10 = 28; // D10 -static const uint8_t ADC11 = 29; // D12 - -#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) -#define digitalPinToPCICRbit(p) 0 -#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) -#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) - -// __AVR_ATmega32U4__ has an unusual mapping of pins to channels -extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; -#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) - -#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) - -#ifdef ARDUINO_MAIN - -// On the Arduino board, digital pins are also used -// for the analog output (software PWM). Analog input -// pins are a separate set. - -// ATMEL ATMEGA32U4 / ARDUINO LEONARDO -// -// D0 PD2 RXD1/INT2 -// D1 PD3 TXD1/INT3 -// D2 PD1 SDA SDA/INT1 -// D3# PD0 PWM8/SCL OC0B/SCL/INT0 -// D4 A6 PD4 ADC8 -// D5# PC6 ??? OC3A/#OC4A -// D6# A7 PD7 FastPWM #OC4D/ADC10 -// D7 PE6 INT6/AIN0 -// -// D8 A8 PB4 ADC11/PCINT4 -// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 -// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 -// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 -// D12 A11 PD6 T1/#OC4D/ADC9 -// D13# PC7 PWM10 CLK0/OC4A -// -// A0 D18 PF7 ADC7 -// A1 D19 PF6 ADC6 -// A2 D20 PF5 ADC5 -// A3 D21 PF4 ADC4 -// A4 D22 PF1 ADC1 -// A5 D23 PF0 ADC0 -// -// New pins D14..D17 to map SPI port to digital pins -// -// MISO D14 PB3 MISO,PCINT3 -// SCK D15 PB1 SCK,PCINT1 -// MOSI D16 PB2 MOSI,PCINT2 -// SS D17 PB0 RXLED,SS/PCINT0 -// -// Connected LEDs on board for TX and RX -// TXLED D24 PD5 XCK1 -// RXLED D17 PB0 -// HWB PE2 HWB - -// these arrays map port names (e.g. port B) to the -// appropriate addresses for various functions (e.g. reading -// and writing) -const uint16_t PROGMEM port_to_mode_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &DDRB, - (uint16_t) &DDRC, - (uint16_t) &DDRD, - (uint16_t) &DDRE, - (uint16_t) &DDRF, -}; - -const uint16_t PROGMEM port_to_output_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PORTB, - (uint16_t) &PORTC, - (uint16_t) &PORTD, - (uint16_t) &PORTE, - (uint16_t) &PORTF, -}; - -const uint16_t PROGMEM port_to_input_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PINB, - (uint16_t) &PINC, - (uint16_t) &PIND, - (uint16_t) &PINE, - (uint16_t) &PINF, -}; - -const uint8_t PROGMEM digital_pin_to_port_PGM[] = { - PD, // D0 - PD2 - PD, // D1 - PD3 - PD, // D2 - PD1 - PD, // D3 - PD0 - PD, // D4 - PD4 - PC, // D5 - PC6 - PD, // D6 - PD7 - PE, // D7 - PE6 - - PB, // D8 - PB4 - PB, // D9 - PB5 - PB, // D10 - PB6 - PB, // D11 - PB7 - PD, // D12 - PD6 - PC, // D13 - PC7 - - PB, // D14 - MISO - PB3 - PB, // D15 - SCK - PB1 - PB, // D16 - MOSI - PB2 - PB, // D17 - SS - PB0 - - PF, // D18 - A0 - PF7 - PF, // D19 - A1 - PF6 - PF, // D20 - A2 - PF5 - PF, // D21 - A3 - PF4 - PF, // D22 - A4 - PF1 - PF, // D23 - A5 - PF0 - - PD, // D24 - PD5 - PD, // D25 / D6 - A7 - PD7 - PB, // D26 / D8 - A8 - PB4 - PB, // D27 / D9 - A9 - PB5 - PB, // D28 / D10 - A10 - PB6 - PD, // D29 / D12 - A11 - PD6 -}; - -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { - _BV(2), // D0 - PD2 - _BV(3), // D1 - PD3 - _BV(1), // D2 - PD1 - _BV(0), // D3 - PD0 - _BV(4), // D4 - PD4 - _BV(6), // D5 - PC6 - _BV(7), // D6 - PD7 - _BV(6), // D7 - PE6 - - _BV(4), // D8 - PB4 - _BV(5), // D9 - PB5 - _BV(6), // D10 - PB6 - _BV(7), // D11 - PB7 - _BV(6), // D12 - PD6 - _BV(7), // D13 - PC7 - - _BV(3), // D14 - MISO - PB3 - _BV(1), // D15 - SCK - PB1 - _BV(2), // D16 - MOSI - PB2 - _BV(0), // D17 - SS - PB0 - - _BV(7), // D18 - A0 - PF7 - _BV(6), // D19 - A1 - PF6 - _BV(5), // D20 - A2 - PF5 - _BV(4), // D21 - A3 - PF4 - _BV(1), // D22 - A4 - PF1 - _BV(0), // D23 - A5 - PF0 - - _BV(5), // D24 - PD5 - _BV(7), // D25 / D6 - A7 - PD7 - _BV(4), // D26 / D8 - A8 - PB4 - _BV(5), // D27 / D9 - A9 - PB5 - _BV(6), // D28 / D10 - A10 - PB6 - _BV(6), // D29 / D12 - A11 - PD6 -}; - -const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - TIMER0B, /* 3 */ - NOT_ON_TIMER, - TIMER3A, /* 5 */ - TIMER4D, /* 6 */ - NOT_ON_TIMER, - - NOT_ON_TIMER, - TIMER1A, /* 9 */ - TIMER1B, /* 10 */ - TIMER0A, /* 11 */ - - NOT_ON_TIMER, - TIMER4A, /* 13 */ - - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, -}; - -const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { - 7, // A0 PF7 ADC7 - 6, // A1 PF6 ADC6 - 5, // A2 PF5 ADC5 - 4, // A3 PF4 ADC4 - 1, // A4 PF1 ADC1 - 0, // A5 PF0 ADC0 - 8, // A6 D4 PD4 ADC8 - 10, // A7 D6 PD7 ADC10 - 11, // A8 D8 PB4 ADC11 - 12, // A9 D9 PB5 ADC12 - 13, // A10 D10 PB6 ADC13 - 9 // A11 D12 PD6 ADC9 -}; - -#endif /* ARDUINO_MAIN */ - -// These serial port names are intended to allow libraries and architecture-neutral -// sketches to automatically default to the correct port name for a particular type -// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, -// the first hardware serial port whose RX/TX pins are not dedicated to another use. -// -// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor -// -// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial -// -// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library -// -// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. -// -// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX -// pins are NOT connected to anything by default. -#define SERIAL_PORT_MONITOR Serial -#define SERIAL_PORT_USBVIRTUAL Serial -#define SERIAL_PORT_HARDWARE Serial1 -#define SERIAL_PORT_HARDWARE_OPEN Serial1 - -#endif /* Pins_Arduino_h */ diff --git a/keyboards/nyquist/readme.md b/keyboards/nyquist/readme.md index c70bf02576..16debb9870 100644 --- a/keyboards/nyquist/readme.md +++ b/keyboards/nyquist/readme.md @@ -1,167 +1,20 @@ -The Nyquist Keyboard -==================== +Nyquist +======= -The Nyquist is a 60% split ortholinear board by [Keebio](https://keeb.io). It has been designed in a similar manner to the Let's Split v2 by /u/wootpatoot. Each half of the keyboard is arranged in a 5x6 grid. There is an option to use a 2u key with PCB mounted MX stablizers, in place of the two innermost 1u keys on the bottom row. +A split 60% split 5x12 ortholinear keyboard made and sold by Keebio. [More info at Keebio](https://keeb.io). +Keyboard Maintainer: [Bakingpy/nooges](https://github.com/nooges) +Hardware Supported: Pro Micro +Hardware Availability: [Keebio](https://keeb.io) -## Build Guide +Make example for this keyboard (after setting up your build environment): -Since the design is very similar to the Let's Split v2, the build guide for that can be used while the build guide for the Nyquist is being fully developed. A build guide for putting together the Let's Split v2 can be found here: [An Overly Verbose Guide to Building a Let's Split Keyboard](https://github.com/nicinabox/lets-split-guide) + make nyquist-rev1-default -There is additional information there about flashing and adding RGB underglow. +Example of flashing this keyboard: -## First Time Setup + make nyquist-rev1-default-avrdude -Download or clone the whole firmware and navigate to the keyboards/nyquist directory. Once your development environment is setup, you'll be able to generate the default .hex using: +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. -``` -$ make serial -``` - -You will see a lot of output and if everything worked correctly you will see the built hex file: - -``` -nyquist_rev1_serial.hex -``` - -If you would like to use one of the alternative keymaps, or create your own, copy one of the existing [keymaps](keymaps/) and run make like so: - - -``` -$ make YOUR_KEYMAP_NAME -``` - -If everything worked correctly you will see a file: - -``` -nyquist_rev1_YOUR_KEYMAP_NAME.hex -``` - -For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md. - -Features --------- - -For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md). - -Some features supported by the firmware: - -* Either half can connect to the computer via USB, or both halves can be used - independently. -* You only need 3 wires to connect the two halves. Two for VCC and GND and one - for serial communication. -* Optional support for I2C connection between the two halves if for some - reason you require a faster connection between the two halves. Note this - requires an extra wire between halves and pull-up resistors on the data lines. - -### 2u Support -In place of the two innermost 1u keys on the bottom row, a single 2u key can be used. If you choose to use this option, then in your keymap, set the innermost key on the bottom row to what you want the 2u key to be. For example, if using the 2u key on the left half of the board, set the keycode for the lower right key. - -Required Hardware ------------------ - -Apart from diodes and key switches for the keyboard matrix in each half, you -will need: - -* 2 Arduino Pro Micro's. You can find theses on aliexpress for ≈3.50USD each. -* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable - -Alternatively, you can use any sort of cable and socket that has at least 3 -wires. If you want to use I2C to communicate between halves, you will need a -cable with at least 4 wires and 2x 4.7kΩ pull-up resistors - -Optional Hardware ------------------ - -A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. - -Wiring ------- - -The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. -PD0 on the ATmega32u4) between the two Pro Micros. - -Then wire your key matrix to any of the remaining 17 IO pins of the pro micro -and modify the `matrix.c` accordingly. - -The wiring for serial: - - - -The wiring for i2c: - - - -The pull-up resistors may be placed on either half. It is also possible -to use 4 resistors and have the pull-ups in both halves, but this is -unnecessary in simple use cases. - -Flashing -------- -From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. -Example: `make rev1-serial-avrdude` - - -Choosing which board to plug the USB cable into (choosing Master) --------- -Because the two boards are identical, the firmware has logic to differentiate the left and right board. - -It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable. - -The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side. - -The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. - -### Setting the left hand as master -If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. - -### Setting the right hand as master -If you always plug the usb cable into the right board, add an extra flag to your `config.h` -``` - #define MASTER_RIGHT -``` - -### Setting EE_hands to use either hands as master -If you define `EE_HANDS` in your `config.h`, you will need to set the -EEPROM for the left and right halves. - -The EEPROM is used to store whether the -half is left handed or right handed. This makes it so that the same firmware -file will run on both hands instead of having to flash left and right handed -versions of the firmware to each half. To flash the EEPROM file for the left -half run: -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep -// or the equivalent in dfu-programmer - -``` -and similarly for right half -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep -// or the equivalent in dfu-programmer -``` - -NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) - -After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. - -Note that you need to program both halves, but you have the option of using -different keymaps for each half. You could program the left half with a QWERTY -layout and the right half with a Colemak layout using bootmagic's default layout option. -Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the -right half is connected. - - -Notes on Using Pro Micro 3.3V ------------------------------ - -Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects -the frequency on the 3.3V board. - -Also, if the slave board is producing weird characters in certain columns, -update the following line in `matrix.c` to the following: - -``` -// _delay_us(30); // without this wait read unstable value. -_delay_us(300); // without this wait read unstable value. -``` +A build guide for this keyboard can be found here: [Nyquist Build Guide](https://docs.keeb.io) diff --git a/keyboards/nyquist/rules.mk b/keyboards/nyquist/rules.mk index dfcff1d902..3f40ff2f82 100644 --- a/keyboards/nyquist/rules.mk +++ b/keyboards/nyquist/rules.mk @@ -73,15 +73,3 @@ USE_I2C = yes SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes - -avrdude: build - ls /dev/tty* > /tmp/1; \ - echo "Reset your Pro Micro now"; \ - while [[ -z $$USB ]]; do \ - sleep 1; \ - ls /dev/tty* > /tmp/2; \ - USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ - done; \ - avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex - -.PHONY: avrdude diff --git a/keyboards/nyquist/split_util.c b/keyboards/nyquist/split_util.c index 39639c3b4b..346cbc9089 100644 --- a/keyboards/nyquist/split_util.c +++ b/keyboards/nyquist/split_util.c @@ -8,6 +8,7 @@ #include "matrix.h" #include "keyboard.h" #include "config.h" +#include "timer.h" #ifdef USE_I2C # include "i2c.h" @@ -42,6 +43,7 @@ static void keyboard_master_setup(void) { } static void keyboard_slave_setup(void) { + timer_init(); #ifdef USE_I2C i2c_slave_init(SLAVE_I2C_ADDRESS); #else |