3 files changed, 2 insertions, 67 deletions
diff --git a/keyboards/nacly/ua62/config.h b/keyboards/nacly/ua62/config.h
index 63db2e2a25..c350c2bfbc 100644
--- a/keyboards/nacly/ua62/config.h
+++ b/keyboards/nacly/ua62/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -39,68 +38,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION ROW2COL
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 16
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-//   /*==== use exp() and sin() ====*/
-//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
 #define TAPPING_TERM 200
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
 
 /*
  * Feature disable options
@@ -117,7 +60,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/nacly/ua62/info.json b/keyboards/nacly/ua62/info.json
index 6562aee7c3..d7bbd11265 100644
--- a/keyboards/nacly/ua62/info.json
+++ b/keyboards/nacly/ua62/info.json
@@ -8,6 +8,8 @@
       "pid": "0xFFFF",
       "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
     "layouts": {
       "LAYOUT": {
         "layout": [{"x":0, "y":0.6}, {"x":1, "y":0.6}, {"x":2, "y":0.35}, {"x":3, "y":0}, {"x":4, "y":0.35}, {"x":5, "y":0.7}, {"x":9, "y":0.7}, {"x":10, "y":0.35}, {"x":11, "y":0}, {"x":12, "y":0.35}, {"x":13, "y":0.6}, {"x":14, "y":0.6}, {"x":0, "y":1.6}, {"x":1, "y":1.6}, {"x":2, "y":1.35}, {"x":3, "y":1}, {"x":4, "y":1.35}, {"x":5, "y":1.7}, {"x":9, "y":1.7}, {"x":10, "y":1.35}, {"x":11, "y":1}, {"x":12, "y":1.35}, {"x":13, "y":1.6}, {"x":14, "y":1.6}, {"x":0, "y":2.6}, {"x":1, "y":2.6}, {"x":2, "y":2.35}, {"x":3, "y":2}, {"x":4, "y":2.35}, {"x":5, "y":2.7}, {"x":9, "y":2.7}, {"x":10, "y":2.35}, {"x":11, "y":2}, {"x":12, "y":2.35}, {"x":13, "y":2.6}, {"x":14, "y":2.6}, {"x":0, "y":3.6}, {"x":1, "y":3.6}, {"x":2, "y":3.35}, {"x":3, "y":3}, {"x":4, "y":3.35}, {"x":5, "y":3.7}, {"x":9, "y":3.7}, {"x":10, "y":3.35}, {"x":11, "y":3}, {"x":12, "y":3.35}, {"x":13, "y":3.6}, {"x":14, "y":3.6}, {"x":0, "y":4.6}, {"x":1, "y":4.6}, {"x":2, "y":4.35}, {"x":3, "y":4}, {"x":4, "y":4.35}, {"x":5, "y":4.7}, {"x":6, "y":3.95, "h":1.5}, {"x":8, "y":3.95, "h":1.5}, {"x":9, "y":4.7}, {"x":10, "y":4.35}, {"x":11, "y":4}, {"x":12, "y":4.35}, {"x":13, "y":4.6}, {"x":14, "y":4.6}]
diff --git a/keyboards/nacly/ua62/rules.mk b/keyboards/nacly/ua62/rules.mk
index 33d28b3a89..309e55c9f4 100644
--- a/keyboards/nacly/ua62/rules.mk
+++ b/keyboards/nacly/ua62/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #