3 files changed, 11 insertions, 61 deletions
diff --git a/keyboards/metamechs/timberwolf/config.h b/keyboards/metamechs/timberwolf/config.h
index 46d62e795d..916b315725 100644
--- a/keyboards/metamechs/timberwolf/config.h
+++ b/keyboards/metamechs/timberwolf/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_COLS 9
-#define MATRIX_ROWS 12
 
 /*
  * Keyboard Matrix Assignments
@@ -39,54 +34,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/* Wncoswe pins */
-#define ENCODERS_PAD_A { B7 }
-#define ENCODERS_PAD_B { B3 }
-
-/* Encoder resolution, lower number = more sensitive */
-#define ENCODER_RESOLUTION 2
-
-/* Reverse encoder direction */
-// #define ENCODER_DIRECTION_FLIP
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* Backlighting code used for caps lock indicator */
-#define BACKLIGHT_PIN C6
-#define BACKLIGHT_LEVELS 16
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-// #define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-// #define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/metamechs/timberwolf/info.json b/keyboards/metamechs/timberwolf/info.json
index 89e5e796b8..ae12912f00 100644
--- a/keyboards/metamechs/timberwolf/info.json
+++ b/keyboards/metamechs/timberwolf/info.json
@@ -8,6 +8,17 @@
         "pid": "0x5754",
         "device_version": "0.0.1"
     },
+    "backlight": {
+        "pin": "C6",
+        "levels": 16
+    },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "B7", "pin_b": "B3", "resolution": 2}
+        ]
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_all": {
             "layout": [
diff --git a/keyboards/metamechs/timberwolf/rules.mk b/keyboards/metamechs/timberwolf/rules.mk
index 4f16ad1024..247b4e978a 100644
--- a/keyboards/metamechs/timberwolf/rules.mk
+++ b/keyboards/metamechs/timberwolf/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
@@ -18,5 +12,3 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
 ENCODER_ENABLE = yes        # Enable encoder support
 LTO_ENABLE = yes
-
-BACKLIGHT_DRIVER = pwm