3 files changed, 2 insertions, 41 deletions
diff --git a/keyboards/metamechs/timberwolf/config.h b/keyboards/metamechs/timberwolf/config.h
index 46d62e795d..1cf8da6beb 100644
--- a/keyboards/metamechs/timberwolf/config.h
+++ b/keyboards/metamechs/timberwolf/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_COLS 9
@@ -49,44 +48,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Reverse encoder direction */
 // #define ENCODER_DIRECTION_FLIP
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Backlighting code used for caps lock indicator */
 #define BACKLIGHT_PIN C6
 #define BACKLIGHT_LEVELS 16
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-// #define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-// #define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/metamechs/timberwolf/info.json b/keyboards/metamechs/timberwolf/info.json
index 89e5e796b8..87ee8d48a8 100644
--- a/keyboards/metamechs/timberwolf/info.json
+++ b/keyboards/metamechs/timberwolf/info.json
@@ -8,6 +8,8 @@
         "pid": "0x5754",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_all": {
             "layout": [
diff --git a/keyboards/metamechs/timberwolf/rules.mk b/keyboards/metamechs/timberwolf/rules.mk
index 4f16ad1024..0a9f98774c 100644
--- a/keyboards/metamechs/timberwolf/rules.mk
+++ b/keyboards/metamechs/timberwolf/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #