summaryrefslogtreecommitdiff
path: root/keyboards/mechlovin
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/mechlovin')
-rw-r--r--keyboards/mechlovin/adelais/rgb_led/rev1/config.h4
-rw-r--r--keyboards/mechlovin/adelais/rgb_led/rev2/config.h6
-rw-r--r--keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c2
-rw-r--r--keyboards/mechlovin/delphine/rgb_led/config.h4
-rw-r--r--keyboards/mechlovin/delphine/rgb_led/rgb_led.c2
-rw-r--r--keyboards/mechlovin/hannah60rgb/rev1/config.h4
-rw-r--r--keyboards/mechlovin/hannah60rgb/rev1/rev1.c7
-rw-r--r--keyboards/mechlovin/hannah60rgb/rev2/config.h4
-rw-r--r--keyboards/mechlovin/hannah60rgb/rev2/rev2.c2
-rw-r--r--keyboards/mechlovin/hannah910/hannah910.c6
-rw-r--r--keyboards/mechlovin/infinity87/rev2/rev2.c4
-rw-r--r--keyboards/mechlovin/infinity87/rgb_rev1/config.h2
-rw-r--r--keyboards/mechlovin/infinity87/rgb_rev1/rgb_rev1.c2
-rw-r--r--keyboards/mechlovin/infinityce/infinityce.c7
-rw-r--r--keyboards/mechlovin/kanu/kanu.c4
-rw-r--r--keyboards/mechlovin/tmkl/config.h4
16 files changed, 19 insertions, 45 deletions
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev1/config.h b/keyboards/mechlovin/adelais/rgb_led/rev1/config.h
index 1ba7d27dff..d75cbd3f2a 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev1/config.h
+++ b/keyboards/mechlovin/adelais/rgb_led/rev1/config.h
@@ -13,7 +13,7 @@
#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 220 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set \ No newline at end of file
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h
index 38ffdd40ae..c830edce26 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h
+++ b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h
@@ -1,7 +1,7 @@
#pragma once
#define PRODUCT_ID 0xAEC2
-#define PRODUCT Adelais En Ciel Rev2
+#define PRODUCT Adelais En Ciel Rev2
#define MATRIX_ROW_PINS { B1, A0, C13, A1, A2}
#define MATRIX_COL_PINS { A10, A9, A8, B15, B14, B13, B12, B11, B10, B8, B4, B5, B3, C14, A7 }
@@ -31,7 +31,7 @@
#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
@@ -42,4 +42,4 @@
#define ENCODERS_PAD_B { A3 }
#define ENCODER_RESOLUTION 4
-#define TAP_CODE_DELAY 10 \ No newline at end of file
+#define TAP_CODE_DELAY 10
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c b/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c
index 5087174b96..fe946169a7 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c
+++ b/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c
@@ -17,7 +17,7 @@
#include "adelais.h"
#ifdef RGB_MATRIX_ENABLE
-const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
{0, C2_1, C3_1, C4_1}, //D102-A0-0
{0, C5_1, C6_1, C7_1}, //D108-A1-1
diff --git a/keyboards/mechlovin/delphine/rgb_led/config.h b/keyboards/mechlovin/delphine/rgb_led/config.h
index 4d5c853d0c..9a653d7595 100644
--- a/keyboards/mechlovin/delphine/rgb_led/config.h
+++ b/keyboards/mechlovin/delphine/rgb_led/config.h
@@ -24,7 +24,7 @@
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
#endif
-
+
//rgb matrix setting// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
// The address will vary depending on your wiring:
@@ -41,7 +41,7 @@
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
diff --git a/keyboards/mechlovin/delphine/rgb_led/rgb_led.c b/keyboards/mechlovin/delphine/rgb_led/rgb_led.c
index 6f3e3ec731..29b6d1f783 100644
--- a/keyboards/mechlovin/delphine/rgb_led/rgb_led.c
+++ b/keyboards/mechlovin/delphine/rgb_led/rgb_led.c
@@ -18,7 +18,7 @@
#ifdef RGB_MATRIX_ENABLE
-const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
// left CA
{0, C5_2, C6_2, C7_2}, //D2-0
{0, C1_1, C3_2, C4_2}, //D20-1
diff --git a/keyboards/mechlovin/hannah60rgb/rev1/config.h b/keyboards/mechlovin/hannah60rgb/rev1/config.h
index 20873e7161..fd45ecca6c 100644
--- a/keyboards/mechlovin/hannah60rgb/rev1/config.h
+++ b/keyboards/mechlovin/hannah60rgb/rev1/config.h
@@ -11,8 +11,8 @@
# define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
# define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-# define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+// # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
# define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
-#endif \ No newline at end of file
+#endif
diff --git a/keyboards/mechlovin/hannah60rgb/rev1/rev1.c b/keyboards/mechlovin/hannah60rgb/rev1/rev1.c
index 5acea8c665..6b1b8604a2 100644
--- a/keyboards/mechlovin/hannah60rgb/rev1/rev1.c
+++ b/keyboards/mechlovin/hannah60rgb/rev1/rev1.c
@@ -16,13 +16,6 @@
#include "hannah60rgb.h"
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
- matrix_init_user();
- led_init_ports();
-};
-
#ifdef RGB_MATRIX_ENABLE
led_config_t g_led_config = { {
//Key Matrix to LED Index
diff --git a/keyboards/mechlovin/hannah60rgb/rev2/config.h b/keyboards/mechlovin/hannah60rgb/rev2/config.h
index 2bcffbc856..5e57f985d3 100644
--- a/keyboards/mechlovin/hannah60rgb/rev2/config.h
+++ b/keyboards/mechlovin/hannah60rgb/rev2/config.h
@@ -30,11 +30,11 @@
#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
#if defined(RGBLIGHT_ENABLE) && defined(RGB_MATRIX_ENABLE)
# define RGB_MATRIX_DISABLE_KEYCODES
-#endif \ No newline at end of file
+#endif
diff --git a/keyboards/mechlovin/hannah60rgb/rev2/rev2.c b/keyboards/mechlovin/hannah60rgb/rev2/rev2.c
index 05469a1bbe..8b30538cc2 100644
--- a/keyboards/mechlovin/hannah60rgb/rev2/rev2.c
+++ b/keyboards/mechlovin/hannah60rgb/rev2/rev2.c
@@ -17,7 +17,7 @@
#include "rev2.h"
#ifdef RGB_MATRIX_ENABLE
-const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location
diff --git a/keyboards/mechlovin/hannah910/hannah910.c b/keyboards/mechlovin/hannah910/hannah910.c
index 2c696ab564..3237636be2 100644
--- a/keyboards/mechlovin/hannah910/hannah910.c
+++ b/keyboards/mechlovin/hannah910/hannah910.c
@@ -15,10 +15,6 @@
*/
#include "hannah910.h"
-void matrix_init_kb(void) {
- matrix_init_user();
- led_init_ports();
-};
void led_init_ports(void) {
setPinOutput(B2);
setPinOutput(D0);
@@ -35,7 +31,7 @@ void led_set_kb(uint8_t usb_led) {
led_set_user(usb_led);
}
-uint32_t layer_state_set_user(uint32_t state)
+layer_state_t layer_state_set_user(layer_state_t state)
{
// if on layer 1, turn on D2 LED, otherwise off.
if (biton32(state) == 1) {
diff --git a/keyboards/mechlovin/infinity87/rev2/rev2.c b/keyboards/mechlovin/infinity87/rev2/rev2.c
index 5a92f8bec6..dfaa27d036 100644
--- a/keyboards/mechlovin/infinity87/rev2/rev2.c
+++ b/keyboards/mechlovin/infinity87/rev2/rev2.c
@@ -16,10 +16,6 @@
#include "rev2.h"
-void matrix_init_kb(void) {
- matrix_init_user();
- led_init_ports();
-};
void led_init_ports(void) {
setPinOutput(A5);
setPinOutput(A6);
diff --git a/keyboards/mechlovin/infinity87/rgb_rev1/config.h b/keyboards/mechlovin/infinity87/rgb_rev1/config.h
index 0c16c684cf..76c6e0db73 100644
--- a/keyboards/mechlovin/infinity87/rgb_rev1/config.h
+++ b/keyboards/mechlovin/infinity87/rgb_rev1/config.h
@@ -35,7 +35,7 @@
// 0b0110001 AD <-> SCL
// 0b0110010 AD <-> SDA
#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
#define RGB_MATRIX_KEYPRESSES
#define DISABLE_RGB_MATRIX_SPLASH
#define DISABLE_RGB_MATRIX_MULTISPLASH
diff --git a/keyboards/mechlovin/infinity87/rgb_rev1/rgb_rev1.c b/keyboards/mechlovin/infinity87/rgb_rev1/rgb_rev1.c
index f13fee8add..bd1fd8abf7 100644
--- a/keyboards/mechlovin/infinity87/rgb_rev1/rgb_rev1.c
+++ b/keyboards/mechlovin/infinity87/rgb_rev1/rgb_rev1.c
@@ -17,7 +17,7 @@
#include "rgb_rev1.h"
#ifdef RGB_MATRIX_ENABLE
-const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
{0, CS34_SW1, CS35_SW1, CS36_SW1}, //D92-K00-0
{0, CS37_SW1, CS38_SW1, CS39_SW1}, //D94-K01-1
{0, CS31_SW1, CS32_SW1, CS33_SW1}, //D96-K02-2
diff --git a/keyboards/mechlovin/infinityce/infinityce.c b/keyboards/mechlovin/infinityce/infinityce.c
index 5d75b480b3..84eaf0b7ee 100644
--- a/keyboards/mechlovin/infinityce/infinityce.c
+++ b/keyboards/mechlovin/infinityce/infinityce.c
@@ -16,13 +16,6 @@
#include "infinityce.h"
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
- matrix_init_user();
- led_init_ports();
-};
-
void led_init_ports(void) {
// * Set our LED pins as output
setPinOutput(B3);
diff --git a/keyboards/mechlovin/kanu/kanu.c b/keyboards/mechlovin/kanu/kanu.c
index d19b7f1031..ceb874e124 100644
--- a/keyboards/mechlovin/kanu/kanu.c
+++ b/keyboards/mechlovin/kanu/kanu.c
@@ -16,10 +16,6 @@
#include "kanu.h"
-void matrix_init_kb(void) {
- matrix_init_user();
- led_init_ports();
-};
void led_init_ports(void) {
setPinOutput(B2);
setPinOutput(D0);
diff --git a/keyboards/mechlovin/tmkl/config.h b/keyboards/mechlovin/tmkl/config.h
index e36470a9bd..9a1d865e29 100644
--- a/keyboards/mechlovin/tmkl/config.h
+++ b/keyboards/mechlovin/tmkl/config.h
@@ -40,7 +40,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
-#define MATRIX_ROW_PINS { A8, A4, A5, A3, A2, A1, }
+#define MATRIX_ROW_PINS { A8, A4, A5, A3, A2, A1 }
#define MATRIX_COL_PINS { B11, B10, B2, B1, B0, A7, A6, A0, C15, B4, B5, B3, C13, C14 }
#define DIODE_DIRECTION COL2ROW
@@ -58,4 +58,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LED_CAPS_LOCK_PIN B9
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE \ No newline at end of file
+#define LOCKING_SUPPORT_ENABLE
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 05:46:23 +0000