diff options
Diffstat (limited to 'keyboards/mechlovin/zed65/rev1/readme.md')
| -rw-r--r-- | keyboards/mechlovin/zed65/rev1/readme.md | 28 |
1 files changed, 28 insertions, 0 deletions
diff --git a/keyboards/mechlovin/zed65/rev1/readme.md b/keyboards/mechlovin/zed65/rev1/readme.md new file mode 100644 index 0000000000..ca4d2b796e --- /dev/null +++ b/keyboards/mechlovin/zed65/rev1/readme.md @@ -0,0 +1,28 @@ +# zed65 + + + +A 65% PCB with centered USB and JST-SH support, using APM32F103. + +* Keyboard Maintainer: [Mechlovin](https://github.com/mechlovin) +* Hardware Supported: Ori, No2//65, Iron165... +* Hardware Availability: [Mechlovin' Studio](https://mechlovin.studio/) + +Make example for this keyboard (after setting up your build environment): + + make mechlovin/zed65/rev1 + +Flashing example for this keyboard: + + make mechlovin/zed65/rev1:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 4 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Bootloader reset**: Hold down the key at (0,13) in the matrix (usually the Back Space) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |