summaryrefslogtreecommitdiff
path: root/keyboards/maartenwut
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/maartenwut')
-rwxr-xr-xkeyboards/maartenwut/wonderland/config.h55
-rwxr-xr-xkeyboards/maartenwut/wonderland/keymaps/default/keymap.c25
-rwxr-xr-xkeyboards/maartenwut/wonderland/keymaps/keebs/keymap.c26
-rwxr-xr-xkeyboards/maartenwut/wonderland/rules.mk58
-rwxr-xr-xkeyboards/maartenwut/wonderland/wonderland.c42
-rwxr-xr-xkeyboards/maartenwut/wonderland/wonderland.h22
6 files changed, 228 insertions, 0 deletions
diff --git a/keyboards/maartenwut/wonderland/config.h b/keyboards/maartenwut/wonderland/config.h
new file mode 100755
index 0000000000..4da601257a
--- /dev/null
+++ b/keyboards/maartenwut/wonderland/config.h
@@ -0,0 +1,55 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0xA71C
+#define DEVICE_VER 0x0003
+#define MANUFACTURER Maartenwut
+#define PRODUCT Wonderland
+#define DESCRIPTION "QMK Firmware for the Wonderland"
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {B0,D1,D2,D3,D5}
+#define MATRIX_COL_PINS {F0,F1,F4,F5,F6,F7,E6,C7,C6,B6,B5,B4,D7,D6,D4}
+#define UNUSED_PINS
+
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Backlight configuration
+ */
+#define RGB_DI_PIN B7
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+
+#define QMK_ESC_OUTPUT F0 // usually COL
+#define QMK_ESC_INPUT B0 // usually ROW
+#define QMK_LED B1
diff --git a/keyboards/maartenwut/wonderland/keymaps/default/keymap.c b/keyboards/maartenwut/wonderland/keymaps/default/keymap.c
new file mode 100755
index 0000000000..fb876443b3
--- /dev/null
+++ b/keyboards/maartenwut/wonderland/keymaps/default/keymap.c
@@ -0,0 +1,25 @@
+#include QMK_KEYBOARD_H
+
+enum layers {
+ _BASE,
+ _FUNC
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_BASE] = LAYOUT(
+ KC_ESC, KC_1, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC, \
+ KC_F10, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
+ RGB_TOG, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), \
+ KC_LCTL, KC_LAPO, KC_BSPC, KC_LGUI, KC_SPC, KC_RAPC, KC_RCTRL \
+ ),
+[_FUNC] = LAYOUT(
+ RGB_TOG, VLK_TOG, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, RESET, \
+ RGB_MOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+ RGB_RMOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UP, XXXXXXX, \
+ KC_LSFT, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RIGHT, XXXXXXX, \
+ _______, KC_LALT, _______, _______, _______, KC_RALT, _______ \
+ )
+};
diff --git a/keyboards/maartenwut/wonderland/keymaps/keebs/keymap.c b/keyboards/maartenwut/wonderland/keymaps/keebs/keymap.c
new file mode 100755
index 0000000000..437370bb73
--- /dev/null
+++ b/keyboards/maartenwut/wonderland/keymaps/keebs/keymap.c
@@ -0,0 +1,26 @@
+#include QMK_KEYBOARD_H
+
+enum layers {
+ _BASE,
+ _FUNC
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_BASE] = LAYOUT(
+ KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC, \
+ KC_F10, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
+ RGB_HUI, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), \
+ KC_LCTL, KC_LAPO, KC_LGUI, RGUI(KC_SPC), KC_SPC, KC_RAPC, KC_RCTRL \
+ ),
+[_FUNC] = LAYOUT(
+ RGB_TOG, VLK_TOG, KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, RESET, \
+RGB_MODE_FORWARD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+RGB_MODE_REVERSE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UP, XXXXXXX, \
+ KC_LSFT, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX,KC_LEFT,KC_DOWN,KC_RIGHT,XXXXXXX, \
+ KC_LCTL, KC_LALT, KC_BSPC, KC_LGUI, KC_SPC, KC_RALT, KC_RCTRL \
+ )
+};
+
+
diff --git a/keyboards/maartenwut/wonderland/rules.mk b/keyboards/maartenwut/wonderland/rules.mk
new file mode 100755
index 0000000000..498076d4ea
--- /dev/null
+++ b/keyboards/maartenwut/wonderland/rules.mk
@@ -0,0 +1,58 @@
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+BOOTLOADER = qmk-dfu
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUTO_SHIFT_ENABLE = no
+VELOCIKEY_ENABLE = yes
diff --git a/keyboards/maartenwut/wonderland/wonderland.c b/keyboards/maartenwut/wonderland/wonderland.c
new file mode 100755
index 0000000000..9f3233e0f1
--- /dev/null
+++ b/keyboards/maartenwut/wonderland/wonderland.c
@@ -0,0 +1,42 @@
+#include "wonderland.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ matrix_init_user();
+ led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+ matrix_scan_user();
+};
+
+void led_init_ports(void) {
+ // * Set our LED pins as output
+ setPinOutput(B1);
+ setPinOutput(B2);
+ setPinOutput(B3);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
+ writePinLow(B1);
+ } else {
+ writePinHigh(B1);
+ }
+
+ if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+ writePinLow(B2);
+ } else {
+ writePinHigh(B2);
+ }
+
+ if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
+ writePinLow(B3);
+ } else {
+ writePinHigh(B3);
+ }
+ led_set_user(usb_led);
+}
diff --git a/keyboards/maartenwut/wonderland/wonderland.h b/keyboards/maartenwut/wonderland/wonderland.h
new file mode 100755
index 0000000000..075e3f64b4
--- /dev/null
+++ b/keyboards/maartenwut/wonderland/wonderland.h
@@ -0,0 +1,22 @@
+#pragma once
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+#define LAYOUT( \
+ k10, k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+ k20, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+ k30, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \
+ k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+ k41, k43, k45, k46, k48, k4a, k4e \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, XXX, k2e}, \
+ {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e}, \
+ {XXX, k41, XXX, k43, XXX, k45, k46, XXX, k48, XXX, k4a, XXX, XXX, XXX, k4e} \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);