diff options
Diffstat (limited to 'keyboards/lfkeyboards')
37 files changed, 3180 insertions, 0 deletions
diff --git a/keyboards/lfkeyboards/TWIlib.c b/keyboards/lfkeyboards/TWIlib.c new file mode 100644 index 0000000000..abb12cc87a --- /dev/null +++ b/keyboards/lfkeyboards/TWIlib.c @@ -0,0 +1,283 @@ +/* + * TWIlib.c + * + * Created: 6/01/2014 10:41:33 PM + * Author: Chris Herring + */ + +#include <avr/io.h> +#include <avr/interrupt.h> +#include "TWIlib.h" +#include "util/delay.h" +#include "print.h" + +void TWIInit() +{ + TWIInfo.mode = Ready; + TWIInfo.errorCode = 0xFF; + TWIInfo.repStart = 0; + // Set pre-scalers (no pre-scaling) + TWSR = 0; + // Set bit rate + TWBR = ((F_CPU / TWI_FREQ) - 16) / 2; + // Enable TWI and interrupt + TWCR = (1 << TWIE) | (1 << TWEN); +} + +uint8_t isTWIReady() +{ + if ( (TWIInfo.mode == Ready) | (TWIInfo.mode == RepeatedStartSent) ) + { + return 1; + } + else + { + if(TWIInfo.mode == Initializing){ + switch(TWIInfo.errorCode){ + case TWI_SUCCESS: + case TWI_NO_RELEVANT_INFO: + break; + case TWI_LOST_ARBIT: + case TWI_MT_DATA_NACK: + // Some kind of I2C error, reset and re-init + xprintf("I2C init error: %d\n", TWIInfo.errorCode); + TWCR = (1 << TWINT)|(1 << TWSTO); + TWIInit(); + break; + default: + xprintf("Other i2c init error: %d\n", TWIInfo.errorCode); + } + } + return 0; + } +} + + +void TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart, uint8_t blocking) +{ + // Wait until ready + while (!isTWIReady()) {_delay_us(1);} + // Reset the I2C stuff + TWCR = (1 << TWINT)|(1 << TWSTO); + TWIInit(); + // Set repeated start mode + TWIInfo.repStart = repStart; + // Copy transmit info to global variables + TWITransmitBuffer = (uint8_t *)TXdata; + TXBuffLen = dataLen; + TXBuffIndex = 0; + + // If a repeated start has been sent, then devices are already listening for an address + // and another start does not need to be sent. + if (TWIInfo.mode == RepeatedStartSent) + { + TWIInfo.mode = Initializing; + TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer + TWISendTransmit(); // Send the data + } + else // Otherwise, just send the normal start signal to begin transmission. + { + TWIInfo.mode = Initializing; + TWISendStart(); + } + if(blocking){ + // Wait until ready + while (!isTWIReady()){_delay_us(1);} + } +} + + +// uint8_t TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart) +// { +// if (dataLen <= TXMAXBUFLEN) +// { +// // Wait until ready +// while (!isTWIReady()) {_delay_us(1);} +// // Set repeated start mode +// TWIInfo.repStart = repStart; +// // Copy data into the transmit buffer +// uint8_t *data = (uint8_t *)TXdata; +// for (int i = 0; i < dataLen; i++) +// { +// TWITransmitBuffer[i] = data[i]; +// } +// // Copy transmit info to global variables +// TXBuffLen = dataLen; +// TXBuffIndex = 0; + +// // If a repeated start has been sent, then devices are already listening for an address +// // and another start does not need to be sent. +// if (TWIInfo.mode == RepeatedStartSent) +// { +// TWIInfo.mode = Initializing; +// TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer +// TWISendTransmit(); // Send the data +// } +// else // Otherwise, just send the normal start signal to begin transmission. +// { +// TWIInfo.mode = Initializing; +// TWISendStart(); +// } + +// } +// else +// { +// return 1; // return an error if data length is longer than buffer +// } +// return 0; +// } + +uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart) +{ + // Check if number of bytes to read can fit in the RXbuffer + if (bytesToRead < RXMAXBUFLEN) + { + // Reset buffer index and set RXBuffLen to the number of bytes to read + RXBuffIndex = 0; + RXBuffLen = bytesToRead; + // Create the one value array for the address to be transmitted + uint8_t TXdata[1]; + // Shift the address and AND a 1 into the read write bit (set to write mode) + TXdata[0] = (TWIaddr << 1) | 0x01; + // Use the TWITransmitData function to initialize the transfer and address the slave + TWITransmitData(TXdata, 1, repStart, 0); + } + else + { + return 0; + } + return 1; +} + +ISR (TWI_vect) +{ + switch (TWI_STATUS) + { + // ----\/ ---- MASTER TRANSMITTER OR WRITING ADDRESS ----\/ ---- // + case TWI_MT_SLAW_ACK: // SLA+W transmitted and ACK received + // Set mode to Master Transmitter + TWIInfo.mode = MasterTransmitter; + case TWI_START_SENT: // Start condition has been transmitted + case TWI_MT_DATA_ACK: // Data byte has been transmitted, ACK received + if (TXBuffIndex < TXBuffLen) // If there is more data to send + { + TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer + TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; + TWISendTransmit(); // Send the data + } + // This transmission is complete however do not release bus yet + else if (TWIInfo.repStart) + { + TWIInfo.errorCode = 0xFF; + TWISendStart(); + } + // All transmissions are complete, exit + else + { + TWIInfo.mode = Ready; + TWIInfo.errorCode = 0xFF; + TWISendStop(); + } + break; + + // ----\/ ---- MASTER RECEIVER ----\/ ---- // + + case TWI_MR_SLAR_ACK: // SLA+R has been transmitted, ACK has been received + // Switch to Master Receiver mode + TWIInfo.mode = MasterReceiver; + // If there is more than one byte to be read, receive data byte and return an ACK + if (RXBuffIndex < RXBuffLen-1) + { + TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; + TWISendACK(); + } + // Otherwise when a data byte (the only data byte) is received, return NACK + else + { + TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; + TWISendNACK(); + } + break; + + case TWI_MR_DATA_ACK: // Data has been received, ACK has been transmitted. + + /// -- HANDLE DATA BYTE --- /// + TWIReceiveBuffer[RXBuffIndex++] = TWDR; + // If there is more than one byte to be read, receive data byte and return an ACK + if (RXBuffIndex < RXBuffLen-1) + { + TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; + TWISendACK(); + } + // Otherwise when a data byte (the only data byte) is received, return NACK + else + { + TWIInfo.errorCode = TWI_NO_RELEVANT_INFO; + TWISendNACK(); + } + break; + + case TWI_MR_DATA_NACK: // Data byte has been received, NACK has been transmitted. End of transmission. + + /// -- HANDLE DATA BYTE --- /// + TWIReceiveBuffer[RXBuffIndex++] = TWDR; + // This transmission is complete however do not release bus yet + if (TWIInfo.repStart) + { + TWIInfo.errorCode = 0xFF; + TWISendStart(); + } + // All transmissions are complete, exit + else + { + TWIInfo.mode = Ready; + TWIInfo.errorCode = 0xFF; + TWISendStop(); + } + break; + + // ----\/ ---- MT and MR common ----\/ ---- // + + case TWI_MR_SLAR_NACK: // SLA+R transmitted, NACK received + case TWI_MT_SLAW_NACK: // SLA+W transmitted, NACK received + case TWI_MT_DATA_NACK: // Data byte has been transmitted, NACK received + case TWI_LOST_ARBIT: // Arbitration has been lost + // Return error and send stop and set mode to ready + if (TWIInfo.repStart) + { + TWIInfo.errorCode = TWI_STATUS; + TWISendStart(); + } + // All transmissions are complete, exit + else + { + TWIInfo.mode = Ready; + TWIInfo.errorCode = TWI_STATUS; + TWISendStop(); + } + break; + case TWI_REP_START_SENT: // Repeated start has been transmitted + // Set the mode but DO NOT clear TWINT as the next data is not yet ready + TWIInfo.mode = RepeatedStartSent; + break; + + // ----\/ ---- SLAVE RECEIVER ----\/ ---- // + + // TODO IMPLEMENT SLAVE RECEIVER FUNCTIONALITY + + // ----\/ ---- SLAVE TRANSMITTER ----\/ ---- // + + // TODO IMPLEMENT SLAVE TRANSMITTER FUNCTIONALITY + + // ----\/ ---- MISCELLANEOUS STATES ----\/ ---- // + case TWI_NO_RELEVANT_INFO: // It is not really possible to get into this ISR on this condition + // Rather, it is there to be manually set between operations + break; + case TWI_ILLEGAL_START_STOP: // Illegal START/STOP, abort and return error + TWIInfo.errorCode = TWI_ILLEGAL_START_STOP; + TWIInfo.mode = Ready; + TWISendStop(); + break; + } + +} diff --git a/keyboards/lfkeyboards/TWIlib.h b/keyboards/lfkeyboards/TWIlib.h new file mode 100644 index 0000000000..6db3cc9513 --- /dev/null +++ b/keyboards/lfkeyboards/TWIlib.h @@ -0,0 +1,81 @@ +/* + * TWIlib.h + * + * Created: 6/01/2014 10:38:42 PM + * Author: Chris Herring + */ + + +#ifndef TWILIB_H_ +#define TWILIB_H_ +// TWI bit rate +#define TWI_FREQ 400000 +// Get TWI status +#define TWI_STATUS (TWSR & 0xF8) +// Transmit buffer length +#define TXMAXBUFLEN 20 +// Receive buffer length +#define RXMAXBUFLEN 20 +// Global transmit buffer +volatile uint8_t *TWITransmitBuffer; +// Global receive buffer +volatile uint8_t TWIReceiveBuffer[RXMAXBUFLEN]; +// Buffer indexes +volatile int TXBuffIndex; // Index of the transmit buffer. Is volatile, can change at any time. +int RXBuffIndex; // Current index in the receive buffer +// Buffer lengths +int TXBuffLen; // The total length of the transmit buffer +int RXBuffLen; // The total number of bytes to read (should be less than RXMAXBUFFLEN) + +typedef enum { + Ready, + Initializing, + RepeatedStartSent, + MasterTransmitter, + MasterReceiver, + SlaceTransmitter, + SlaveReciever + } TWIMode; + + typedef struct TWIInfoStruct{ + TWIMode mode; + uint8_t errorCode; + uint8_t repStart; + }TWIInfoStruct; +TWIInfoStruct TWIInfo; + + +// TWI Status Codes +#define TWI_START_SENT 0x08 // Start sent +#define TWI_REP_START_SENT 0x10 // Repeated Start sent +// Master Transmitter Mode +#define TWI_MT_SLAW_ACK 0x18 // SLA+W sent and ACK received +#define TWI_MT_SLAW_NACK 0x20 // SLA+W sent and NACK received +#define TWI_MT_DATA_ACK 0x28 // DATA sent and ACK received +#define TWI_MT_DATA_NACK 0x30 // DATA sent and NACK received +// Master Receiver Mode +#define TWI_MR_SLAR_ACK 0x40 // SLA+R sent, ACK received +#define TWI_MR_SLAR_NACK 0x48 // SLA+R sent, NACK received +#define TWI_MR_DATA_ACK 0x50 // Data received, ACK returned +#define TWI_MR_DATA_NACK 0x58 // Data received, NACK returned + +// Miscellaneous States +#define TWI_LOST_ARBIT 0x38 // Arbitration has been lost +#define TWI_NO_RELEVANT_INFO 0xF8 // No relevant information available +#define TWI_ILLEGAL_START_STOP 0x00 // Illegal START or STOP condition has been detected +#define TWI_SUCCESS 0xFF // Successful transfer, this state is impossible from TWSR as bit2 is 0 and read only + + +#define TWISendStart() (TWCR = (1<<TWINT)|(1<<TWSTA)|(1<<TWEN)|(1<<TWIE)) // Send the START signal, enable interrupts and TWI, clear TWINT flag to resume transfer. +#define TWISendStop() (TWCR = (1<<TWINT)|(1<<TWSTO)|(1<<TWEN)|(1<<TWIE)) // Send the STOP signal, enable interrupts and TWI, clear TWINT flag. +#define TWISendTransmit() (TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)) // Used to resume a transfer, clear TWINT and ensure that TWI and interrupts are enabled. +#define TWISendACK() (TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)|(1<<TWEA)) // FOR MR mode. Resume a transfer, ensure that TWI and interrupts are enabled and respond with an ACK if the device is addressed as a slave or after it receives a byte. +#define TWISendNACK() (TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)) // FOR MR mode. Resume a transfer, ensure that TWI and interrupts are enabled but DO NOT respond with an ACK if the device is addressed as a slave or after it receives a byte. + +// Function declarations +void TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart, uint8_t blocking); +void TWIInit(void); +uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart); +uint8_t isTWIReady(void); + +#endif // TWICOMMS_H_
\ No newline at end of file diff --git a/keyboards/lfkeyboards/issi.c b/keyboards/lfkeyboards/issi.c new file mode 100644 index 0000000000..e675a59868 --- /dev/null +++ b/keyboards/lfkeyboards/issi.c @@ -0,0 +1,244 @@ +#ifdef ISSI_ENABLE + +#include <stdlib.h> +#include <stdint.h> +#include <util/delay.h> +#include <avr/sfr_defs.h> +#include <avr/io.h> +#include <util/twi.h> +#include "issi.h" +#include "print.h" +#include "TWIlib.h" + +#define ISSI_ADDR_DEFAULT 0xE8 + +#define ISSI_REG_CONFIG 0x00 +#define ISSI_REG_CONFIG_PICTUREMODE 0x00 +#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08 + +#define ISSI_CONF_PICTUREMODE 0x00 +#define ISSI_CONF_AUTOFRAMEMODE 0x04 +#define ISSI_CONF_AUDIOMODE 0x08 + +#define ISSI_REG_PICTUREFRAME 0x01 + +#define ISSI_REG_SHUTDOWN 0x0A +#define ISSI_REG_AUDIOSYNC 0x06 + +#define ISSI_COMMANDREGISTER 0xFD +#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine' +uint8_t control[8][9] = { + {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0}, +}; +ISSIDeviceStruct *issi_devices[4] = {0, 0, 0, 0}; + +#ifndef cbi +#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) +#endif + +#ifndef sbi +#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + +#define I2C_WRITE 0 +#define F_SCL 400000UL // SCL frequency +#define Prescaler 1 +#define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2) + +uint8_t i2c_start(uint8_t address) +{ + // reset TWI control register + TWCR = 0; + // transmit START condition + TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); + // wait for end of transmission + while( !(TWCR & (1<<TWINT)) ); + + // check if the start condition was successfully transmitted + if((TWSR & 0xF8) != TW_START){ return 1; } + + // load slave address into data register + TWDR = address; + // start transmission of address + TWCR = (1<<TWINT) | (1<<TWEN); + // wait for end of transmission + while( !(TWCR & (1<<TWINT)) ); + + // check if the device has acknowledged the READ / WRITE mode + uint8_t twst = TW_STATUS & 0xF8; + if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1; + + return 0; +} + +uint8_t i2c_write(uint8_t data) +{ + // load data into data register + TWDR = data; + // start transmission of data + TWCR = (1 << TWINT) | (1 << TWEN); + // wait for end of transmission + while (!(TWCR & (1 << TWINT))) + ; + + if ((TWSR & 0xF8) != TW_MT_DATA_ACK) { + return 1; + } + return 0; +} + +uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length) +{ + TWBR = (uint8_t)TWBR_val; + if (i2c_start(address | I2C_WRITE)) + return 1; + for (uint16_t i = 0; i < length; i++) { + if (i2c_write(data[i])) + return 1; + } + // transmit STOP condition + TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWSTO); + return 0; +} + +void setFrame(uint8_t device, uint8_t frame) +{ + static uint8_t current_frame = -1; + if(current_frame != frame){ + uint8_t payload[] = { + ISSI_ADDR_DEFAULT | device << 1, + ISSI_COMMANDREGISTER, + frame + }; + TWITransmitData(payload, sizeof(payload), 0, 1); + } + // static uint8_t current_frame = 0xFF; + // if(current_frame == frame){ + // // return; + // } + // uint8_t payload[2] = { ISSI_COMMANDREGISTER, frame }; + // i2c_transmit(ISSI_ADDR_DEFAULT | device << 1, payload, 2); + // current_frame = frame; +} + +void writeRegister8(uint8_t device, uint8_t frame, uint8_t reg, uint8_t data) +{ + // Set the frame + setFrame(device, frame); + + // Write to the register + uint8_t payload[] = { + ISSI_ADDR_DEFAULT | device << 1, + reg, + data + }; + TWITransmitData(payload, sizeof(payload), 0, 1); +} + +void activateLED(uint8_t matrix, uint8_t cx, uint8_t cy, uint8_t pwm) +{ + uint8_t device_addr = (matrix & 0x06) >> 1; + ISSIDeviceStruct *device = issi_devices[device_addr]; + if(device == 0){ + return; + } + // xprintf("activeLED: %02X %02X %02X %02X\n", matrix, cy, cx, pwm); + uint8_t x = cx - 1; // funciton takes 1 based counts, but we need 0... + uint8_t y = cy - 1; // creating them once for less confusion + uint8_t control_reg = (y << 1) | (matrix & 0x01); + if(pwm == 0){ + cbi(device->led_ctrl[control_reg], x); + cbi(device->led_blink_ctrl[control_reg], x); + }else{ + sbi(device->led_ctrl[control_reg], x); + sbi(device->led_blink_ctrl[control_reg], x); + } + uint8_t pwm_reg = 0; + switch(matrix & 0x01){ + case 0: + pwm_reg = 0x00; + break; + case 1: + pwm_reg = 0x08; + break; + } + pwm_reg += (y << 4) + x; + device->led_pwm[pwm_reg] = pwm; + device->led_dirty = 1; +} + +void update_issi(uint8_t device_addr, uint8_t blocking) +{ + // This seems to take about 6ms + ISSIDeviceStruct *device = issi_devices[device_addr]; + if(device != 0){ + if(device->fn_dirty){ + device->fn_dirty = 0; + setFrame(device_addr, ISSI_BANK_FUNCTIONREG); + TWITransmitData(&device->fn_device_addr, sizeof(device->fn_registers) + 2, 0, 1); + } + if(device->led_dirty){ + device->led_dirty = 0; + setFrame(device_addr, 0); + TWITransmitData(&device->led_device_addr, 0xB6, 0, blocking); + } + } +} + +void issi_init(void) +{ + TWIInit(); + for(uint8_t device_addr = 0; device_addr < 4; device_addr++){ + // If this device has been previously allocated, free it + if(issi_devices[device_addr] != 0){ + free(issi_devices[device_addr]); + } + // Try to shutdown the device, if this fails skip this device + writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x00); + while (!isTWIReady()){_delay_us(1);} + if(TWIInfo.errorCode != 0xFF){ + xprintf("ISSI init failed %d %02X %02X\n", device_addr, TWIInfo.mode, TWIInfo.errorCode); + continue; + } + // Allocate the device structure - calloc zeros it for us + ISSIDeviceStruct *device = (ISSIDeviceStruct *)calloc(sizeof(ISSIDeviceStruct) * 2, 1); + issi_devices[device_addr] = device; + device->fn_device_addr = ISSI_ADDR_DEFAULT | device_addr << 1; + device->fn_register_addr = 0; + device->led_device_addr = ISSI_ADDR_DEFAULT | device_addr << 1; + device->led_register_addr = 0; + // set dirty bits so that all of the buffered data is written out + device->fn_dirty = 1; + device->led_dirty = 1; + update_issi(device_addr, 1); + // Set the function register to picture mode + // device->fn_reg[ISSI_REG_CONFIG] = ISSI_REG_CONFIG_PICTUREMODE; + writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x01); + } + + // Shutdown and set all registers to 0 + // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x00); + // for(uint8_t bank = 0; bank <= 7; bank++){ + // for (uint8_t reg = 0x00; reg <= 0xB3; reg++) { + // writeRegister8(device_addr, bank, reg, 0x00); + // } + // } + // for (uint8_t reg = 0; reg <= 0x0C; reg++) { + // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, reg, 0x00); + // } + // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE); + // writeRegister8(device_addr, ISSI_BANK_FUNCTIONREG, ISSI_REG_SHUTDOWN, 0x01); + // picture mode + // writeRegister8(ISSI_BANK_FUNCTIONREG, 0x01, 0x01); + + //Enable blink + // writeRegister8(ISSI_BANK_FUNCTIONREG, 0x05, 0x48B); + + //Enable Breath + +} + +#endif
\ No newline at end of file diff --git a/keyboards/lfkeyboards/issi.h b/keyboards/lfkeyboards/issi.h new file mode 100644 index 0000000000..51777f6ee3 --- /dev/null +++ b/keyboards/lfkeyboards/issi.h @@ -0,0 +1,40 @@ +#ifdef ISSI_ENABLE +#ifndef ISSI_H +#define ISSI_H + +typedef struct ISSIDeviceStruct{ + uint8_t fn_dirty; // function registers need to be resent + uint8_t fn_device_addr; + uint8_t fn_register_addr; + uint8_t fn_registers[13]; + uint8_t led_dirty; // LED data has changed and needs to be resent + uint8_t led_device_addr; + uint8_t led_register_addr; + uint8_t led_ctrl[18]; + uint8_t led_blink_ctrl[18]; + uint8_t led_pwm[144]; +}ISSIDeviceStruct; + +extern ISSIDeviceStruct *issi_devices[]; + +// Low level commands- 'device' is the 2-bit i2c id. +void issi_init(void); +void set_shutdown(uint8_t device, uint8_t shutdown); +void writeRegister8(uint8_t device, uint8_t frame, uint8_t reg, uint8_t data); + +// Higher level, no device is given, but it is calculated from 'matrix' +// Each device has 2 blocks, max of 4 devices: +// Device | Block = Matrix +// 0 A 0 +// 0 B 1 +// 1 A 2 +// 1 B 3 +// 2 A 4 +// 2 B 5 +// 3 A 6 +// 3 B 7 +void activateLED(uint8_t matrix, uint8_t cx, uint8_t cy, uint8_t pwm); +void update_issi(uint8_t device_addr, uint8_t blocking); + +#endif +#endif
\ No newline at end of file diff --git a/keyboards/lfkeyboards/lfk78/config.h b/keyboards/lfkeyboards/lfk78/config.h new file mode 100644 index 0000000000..32f4455dae --- /dev/null +++ b/keyboards/lfkeyboards/lfk78/config.h @@ -0,0 +1,172 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER LFKeyboards +#define PRODUCT LFK78 +#define DESCRIPTION QMK keyboard firmware for LFK78 LFK_REV_STRING + +#ifdef LFK_REV_B +/* RevB Matrix config */ + #define DIODE_DIRECTION COL2ROW + #define MATRIX_ROWS 10 + #define MATRIX_COLS 8 + #define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, F0, F1, F4, F5, F6} + #define MATRIX_COL_PINS { E6, F7, D2, D3, D4, D5, D6, D7 } + #define UNUSED_PINS { C7 } + #define RGBLED_NUM 31 // Number of LEDs +#else +/* RevC/D Matrix config */ + #define DIODE_DIRECTION COL2ROW + #define MATRIX_ROWS 5 + #define MATRIX_COLS 18 + #define MATRIX_ROW_PINS {D2, D3, D4, D5, D6 } + #define MATRIX_COL_PINS {A0, A1, A2, A3, A4, A5, A6, A7, E6, E7,\ + F0, F1, F2, F3, C0, C1, C2, C3 } + #define UNUSED_PINS {B0, B1, B2, B3, B4, B4, B5, B6, B7, C4, C5, C6, C7,\ + D0, D1, D7, E0, E1, E2, E3, E4, D5, F4, F5, F6, F7,\ + E6, E7, F0, F1, F2, F3, C0, C1, C2, C3} + #define RGBLED_NUM 27 // Number of LEDs +#endif + +#define AUDIO_VOICES +#define C6_AUDIO + +#define BACKLIGHT_LEVELS 8 +#define BACKLIGHT_PWM_MAP {8, 16, 40, 55, 70, 128, 200, 255} + +#define RGB_DI_PIN C7 // Have to set it to something to get the ws2812 code to compile +#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#define TAPPING_TERM 200 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/lfkeyboards/lfk78/keymaps/default/config.h b/keyboards/lfkeyboards/lfk78/keymaps/default/config.h new file mode 100644 index 0000000000..8893d122e0 --- /dev/null +++ b/keyboards/lfkeyboards/lfk78/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/lfkeyboards/lfk78/keymaps/default/keymap.c b/keyboards/lfkeyboards/lfk78/keymaps/default/keymap.c new file mode 100644 index 0000000000..613213f067 --- /dev/null +++ b/keyboards/lfkeyboards/lfk78/keymaps/default/keymap.c @@ -0,0 +1,123 @@ +#include "lfk78.h" +#include "issi.h" +#include "lighting.h" +#include "action_layer.h" + +//Define a shorter 'transparent' key code to make the keymaps more compact +#define KC_TR KC_TRNS + +enum keymap_layout { + VANILLA = 0, // matches MF68 layout + FUNC, // 0x02 + SETTINGS, // 0x04 +}; + +// Colors of the layer indicator LED +// This list needs to define layer 0xFFFFFFFF, it is the end of the list, and the unknown layer +const Layer_Info layer_info[] = { + // Layer Mask Red Green Blue + {0x00000000, 0xFFFFFFFF, {0x0000, 0x0FFF, 0x0000}}, // base layer - green + {0x00000002, 0xFFFFFFFE, {0x0000, 0x0000, 0x0FFF}}, // function layer - blue + {0x00000004, 0xFFFFFFFC, {0x0FFF, 0x0000, 0x0FFF}}, // settings layer - magenta + {0xFFFFFFFF, 0xFFFFFFFF, {0x0FFF, 0x0FFF, 0x0FFF}}, // unknown layer - REQUIRED - white +}; + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[VANILLA] = KEYMAP( + /* Keymap VANILLA: (Base Layer) Default Layer + * ,---------. ,------------------------------------------------------------. ,---------. + * | F1 | F2 | |Esc~| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backspa| | Ins|PgUp| + * |---------| |------------------------------------------------------------| |---------| + * | F3 | F4 | |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | Del|PgDn| + * |---------| |------------------------------------------------------------| `---------' + * | F5 | F6 | |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |---------| |------------------------------------------------------------| ,----. + * | F7 | F8 | |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | | Up | + * |---------| |-------------------------------------------------------------------------. + * | F9 | F10| |Ctrl|Win |Alt | Space |Alt |Ctrl|Func | |Lft| Dn |Rig | + * `---------' `------------------------------------------------------' `-------------' + */ + KC_F1, KC_F2, KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_PGUP, + KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN, + KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, MO(FUNC), KC_LEFT, KC_DOWN, KC_RGHT), + /* Keymap FUNCTION: Function Layer + * ,---------. ,-------------------------------------------------------------. ,---------. + * | | | | ` |F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Delete | | Ins|Home| + * |---------| |-------------------------------------------------------------| |---------| + * | | | |Tab |Hom| Up|End|PgU| | | | | | | | | | | Del|End | + * |---------| |-------------------------------------------------------------| `---------' + * | | | |MO(FUNC)|Lft|Dn |Rig|PgD| |Lft|Dwn| Up|Rgt| | | | + * |---------| |-------------------------------------------------------------| ,----. + * | | | |Shift | | | | | | |Mute|V- |V+ | |TG(SETTINGS)| | Up | + * |---------| |--------------------------------------------------------------------------. + * | | | |Ctrl|Win |Alt | Enter |Alt |Func |CTRL | |Lft| Dn |Rig | + * `---------' `------------------------------------------------------' `-------------' + */ +[FUNC] = KEYMAP( + KC_TR, KC_TR, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TR, KC_HOME, + KC_TR, KC_TR, KC_NO,KC_HOME, KC_UP, KC_END, KC_PGUP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TR, KC_END, + KC_TR, KC_TR, KC_TR, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_NO, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_NO, KC_NO, KC_NO, + KC_TR, KC_TR, KC_TR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, TG(SETTINGS), KC_TR, + KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_ENT, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR), + + /* Keymap SETTINGS: Settings Layer + * ,---------. ,-------------------------------------------------------------. ,-------------. + * | | | |LayClr| | | | | | | | | | |BL-|BL+|BL Togl| |RGB Tog |Val+| + * |---------| |-------------------------------------------------------------| |-------------| + * | | | |MuMode | | | | | | | | | | | | |LEDTst| |RGB Mode|Val-| + * |---------| |-------------------------------------------------------------| `-------------' + * | | | |AudTgl |Hz+|MS+| | | | | | | | | | RST | + * |---------| |-------------------------------------------------------------| ,----. + * | | | |ClickTgl |Hz-|MS-| | | | |MuTgl| | | |Layer Clr | |Hue+| + * |---------| |-------------------------------------------------------------------------. + * | | | | | | | | | | | |Sat-|Hue-|Sat+| + * `---------' `--------------------------------------------------------' `--------------' + */ +[SETTINGS] = KEYMAP( + KC_NO, KC_NO, KC_FN0,KC_NO,KC_NO,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_DEC, BL_INC, BL_TOGG, RGB_TOG, RGB_VAI, + KC_NO, KC_NO, MU_MOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_MOD, RGB_VAD, + KC_NO, KC_NO, AU_TOG, KC_FN1,KC_FN3, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RESET, + KC_NO, KC_NO, KC_FN5, KC_FN2,KC_FN4, KC_NO, KC_NO, KC_NO, KC_NO, MU_TOG, KC_NO, KC_NO, KC_NO, KC_NO, RGB_HUI, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_SAD, RGB_HUD, RGB_SAI), +}; + +const uint16_t PROGMEM fn_actions[] = { + ACTION_FUNCTION(LFK_CLEAR), // FN0 - reset layers + ACTION_FUNCTION(LFK_CLICK_FREQ_HIGHER), // FN1 - Increase Freq of audio click + ACTION_FUNCTION(LFK_CLICK_FREQ_LOWER), // FN2 - Decrease Freq of audio click + ACTION_FUNCTION(LFK_CLICK_TIME_LONGER), // FN3 - Increase length of audio click + ACTION_FUNCTION(LFK_CLICK_TIME_SHORTER), // FN4 - Decrease length of audio click + ACTION_FUNCTION(LFK_CLICK_TOGGLE), // FN5 - Toggle audio click + }; + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + // This keymap only has a single base layer, so reset the default if needed + if(eeconfig_read_default_layer() > 1){ + eeconfig_update_default_layer(1); + default_layer_set(1); + } +} + +void matrix_scan_user(void) { +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { +} diff --git a/keyboards/lfkeyboards/lfk78/keymaps/default/readme.md b/keyboards/lfkeyboards/lfk78/keymaps/default/readme.md new file mode 100644 index 0000000000..8321adeb7a --- /dev/null +++ b/keyboards/lfkeyboards/lfk78/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for LFK78 diff --git a/keyboards/lfkeyboards/lfk78/keymaps/default/rules.mk b/keyboards/lfkeyboards/lfk78/keymaps/default/rules.mk new file mode 100644 index 0000000000..dd973eac3d --- /dev/null +++ b/keyboards/lfkeyboards/lfk78/keymaps/default/rules.mk @@ -0,0 +1,42 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# + +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not qmk base +SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +TAP_DANCE_ENABLE = no + +ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled +WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif + +ifeq ($(strip $(ISSI_ENABLE)), yes) + TMK_COMMON_DEFS += -DISSI_ENABLE +endif + +ifeq ($(strip $(WATCHDOG_ENABLE)), yes) + TMK_COMMON_DEFS += -DWATCHDOG_ENABLE +endif + +# Override the LFK78 hardware version: +# +# B - first public release, uses atmega32u4, has audio, ISSI matrix split between RGB and backlight +# C-H - at90usb1286, no audio, ISSI device 0 is backlight, 4 is RGB +# J - at90usb646, C6 audio, ISSI device 0 is backlight, 4 is RGB +# LFK_REV = J diff --git a/keyboards/lfkeyboards/lfk78/lfk78.c b/keyboards/lfkeyboards/lfk78/lfk78.c new file mode 100644 index 0000000000..e4393327f3 --- /dev/null +++ b/keyboards/lfkeyboards/lfk78/lfk78.c @@ -0,0 +1,225 @@ +#include <avr/sfr_defs.h> +#include <avr/timer_avr.h> +#include <avr/wdt.h> +#include "lfk78.h" +#include "keymap.h" +#include "issi.h" +#include "TWIlib.h" +#include "lighting.h" +#include "debug.h" +#include <audio/audio.h> + +uint16_t click_hz = CLICK_HZ; +uint16_t click_time = CLICK_MS; +uint8_t click_toggle = CLICK_ENABLED; + +void matrix_init_kb(void) +{ + matrix_init_user(); + + // Configure the Layer LED + // Set up 16 bit PWM: Fast PWM, mode 15, inverted + TCCR1A = 0b11111110; + TCCR1B = 0b00011001; + ICR1 = 0xFFFF; + // PWM values - 0xFFFF = off, 0x0000 = max + OCR1C = 0x0000; // B7 - Blue + OCR1B = 0x0000; // B6 - Green + OCR1A = 0x0FFF; // B5 - Red + // Set as output + DDRB |= 0b11100000; + +#ifndef AUDIO_ENABLE + // If we're not using the audio pin, drive it low + sbi(DDRC, 6); + cbi(PORTC, 6); +#endif + +#ifdef ISSI_ENABLE + issi_init(); +#endif +#ifdef WATCHDOG_ENABLE + // This is done after turning the layer LED red, if we're caught in a loop + // we should get a flashing red light + wdt_enable(WDTO_500MS); +#endif + +} + +void matrix_scan_kb(void) +{ +#ifdef WATCHDOG_ENABLE + wdt_reset(); +#endif +#ifdef ISSI_ENABLE + // switch/underglow lighting update + static uint32_t issi_device = 0; + static uint32_t twi_last_ready = 0; + if(twi_last_ready > 1000){ + // Its been way too long since the last ISSI update, reset the I2C bus and start again + dprintf("TWI failed to recover, TWI re-init\n"); + twi_last_ready = 0; + TWIInit(); + force_issi_refresh(); + } + if(isTWIReady()){ + twi_last_ready = 0; + // If the i2c bus is available, kick off the issi update, alternate between devices + update_issi(issi_device, issi_device); + if(issi_device){ + issi_device = 0; + }else{ + issi_device = 3; + } + }else{ + twi_last_ready++; + } +#endif + // Update layer indicator LED + // + // Not sure how else to reliably do this... TMK has the 'hook_layer_change' + // but can't find QMK equiv + static uint32_t layer_indicator = -1; + if(layer_indicator != layer_state){ + for(uint32_t i=0;; i++){ + // the layer_info list should end with layer 0xFFFFFFFF + // it will break this out of the loop and define the unknown layer color + if((layer_info[i].layer == (layer_state & layer_info[i].mask)) || (layer_info[i].layer == 0xFFFFFFFF)){ + OCR1A = layer_info[i].color.red; + OCR1B = layer_info[i].color.green; + OCR1C = layer_info[i].color.blue; + layer_indicator = layer_state; + break; + } + } + } + matrix_scan_user(); +} + +void click(uint16_t freq, uint16_t duration){ +#ifdef AUDIO_ENABLE + if(freq >= 100 && freq <= 20000 && duration < 100){ + play_note(freq, 10); + for (uint16_t i = 0; i < duration; i++){ + _delay_ms(1); + } + stop_all_notes(); + } +#endif +} + +bool process_record_kb(uint16_t keycode, keyrecord_t* record) +{ + if (click_toggle && record->event.pressed){ + click(click_hz, click_time); + } + if (keycode == RESET) { + reset_keyboard_kb(); + } else { + } + return process_record_user(keycode, record); +} + +void action_function(keyrecord_t *event, uint8_t id, uint8_t opt) +{ +#ifdef AUDIO_ENABLE + int8_t sign = 1; +#endif + if(id == LFK_ESC_TILDE){ + // Send ~ on shift-esc + void (*method)(uint8_t) = (event->event.pressed) ? &add_key : &del_key; + uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)); + if(layer_state == 0){ + method(shifted ? KC_GRAVE : KC_ESCAPE); + }else{ + method(shifted ? KC_ESCAPE : KC_GRAVE); + } + send_keyboard_report(); + }else if(event->event.pressed){ + switch(id){ + case LFK_SET_DEFAULT_LAYER: + // set/save the current base layer to eeprom, falls through to LFK_CLEAR + eeconfig_update_default_layer(1UL << opt); + default_layer_set(1UL << opt); + case LFK_CLEAR: + // Go back to default layer + layer_clear(); + break; +#ifdef ISSI_ENABLE + case LFK_LED_TEST: + led_test(); + break; +#endif +#ifdef AUDIO_ENABLE + case LFK_CLICK_FREQ_LOWER: + sign = -1; // continue to next statement + case LFK_CLICK_FREQ_HIGHER: + click_hz += sign * 100; + click(click_hz, click_time); + break; + case LFK_CLICK_TOGGLE: + if(click_toggle){ + click_toggle = 0; + click(4000, 100); + click(1000, 100); + }else{ + click_toggle = 1; + click(1000, 100); + click(4000, 100); + } + break; + case LFK_CLICK_TIME_SHORTER: + sign = -1; // continue to next statement + case LFK_CLICK_TIME_LONGER: + click_time += sign; + click(click_hz, click_time); + break; +#endif + case LFK_DEBUG_SETTINGS: + dprintf("Click:\n"); + dprintf(" toggle: %d\n", click_toggle); + dprintf(" freq(hz): %d\n", click_hz); + dprintf(" duration(ms): %d\n", click_time); + break; + } + } +} + +void reset_keyboard_kb(){ +#ifdef WATCHDOG_ENABLE + MCUSR = 0; + wdt_disable(); + wdt_reset(); +#endif + OCR1A = 0x0000; // B5 - Red + OCR1B = 0x0FFF; // B6 - Green + OCR1C = 0x0FFF; // B7 - Blue + reset_keyboard(); +} + +void led_set_kb(uint8_t usb_led) +{ + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} + +// LFK lighting info +const uint8_t switch_matrices[] = {0, 1}; +const uint8_t rgb_matrices[] = {6, 7}; +const uint8_t rgb_sequence[] = { + 12, 11, 10, 9, 16, 32, 31, 30, 28, 25, 24, 22, 21, + 20, 19, 18, 17, 1, 2, 3, 4, 5, 6, 7, 8, 14, 13 +}; +// Maps switch LEDs from Row/Col to ISSI matrix. +// Value breakdown: +// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | +// / \ ISSI Col | ISSI Row | +// matrix idx +const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] = +KEYMAP( + 0x19, 0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x99, 0x98, 0x97, 0x96, 0x95, 0x94, 0x93, 0x92, 0x91, + 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5, 0xA4, 0xA3, 0xA2, 0xA1, + 0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5, 0xB3, + 0x49, 0x48, 0x47, 0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6, 0xC5, 0xC4, 0xC2, + 0x59, 0x58, 0x57, 0x56, 0x55, 0x51, 0xD6, 0xE5, 0xE4, 0xE3, 0xE2, 0xE1); diff --git a/keyboards/lfkeyboards/lfk78/lfk78.h b/keyboards/lfkeyboards/lfk78/lfk78.h new file mode 100644 index 0000000000..47ad745318 --- /dev/null +++ b/keyboards/lfkeyboards/lfk78/lfk78.h @@ -0,0 +1,155 @@ +#ifndef LFK78_H +#define LFK78_H + +/* if the kb.h file exists (because we're running from qmkbuilder) include it */ +#if __has_include("kb.h") +#include "kb.h" +#endif + +#include "quantum.h" +#include "matrix.h" +#include <avr/sfr_defs.h> + +#ifndef cbi +#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) +#endif + +#ifndef sbi +#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + + +typedef struct RGB_Color { + uint16_t red; + uint16_t green; + uint16_t blue; +} RGB_Color; + +typedef struct Layer_Info { + uint32_t layer; + uint32_t mask; + RGB_Color color; +} Layer_Info; + +extern const uint32_t layer_count; +extern const Layer_Info layer_info[]; + +enum action_functions { + LFK_CLEAR = 0, // Resets all layers + LFK_ESC_TILDE, // esc+lshift = ~ + LFK_SET_DEFAULT_LAYER, // changes and saves current base layer to eeprom + LFK_CLICK_TOGGLE, // Adjusts click duration + LFK_CLICK_FREQ_HIGHER, // Adjusts click frequency + LFK_CLICK_FREQ_LOWER, // Adjusts click frequency + LFK_CLICK_TIME_LONGER, // Adjusts click duration + LFK_CLICK_TIME_SHORTER, // Adjusts click duration + LFK_DEBUG_SETTINGS, // prints LED and click settings to HID + LFK_LED_TEST // cycles through switch and RGB LEDs +}; + +#define CLICK_HZ 500 +#define CLICK_MS 2 +#define CLICK_ENABLED 0 + +void reset_keyboard_kb(void); +void click(uint16_t freq, uint16_t duration); + +#ifdef LFK_REV_B + /* RevB Keymap */ + // This a shortcut to help you visually see your layout. + /* + * ,---------. ,-----------------------------------------------------------------------. ,---------. + * | 0 | 1 | | 2 | 3 | 4 | 5 | 6 | 7 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | | 94 | 95 | + * |---------| |-----------------------------------------------------------------------| |---------| + * | 10 | 11 | | 12 | 13 | 14 | 15 | 16 | 17 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | | 96 | 97 | + * |---------| |-----------------------------------------------------------------------| `---------' + * | 20 | 21 | | 22 | 23 | 24 | 25 | 26 | 27 | 70 | 71 | 72 | 73 | 74 | 75 | 76 | + * |---------| |-----------------------------------------------------------------------| ,----. + * | 30 | 31 | | 32 | 33 | 34 | 35 | 36 | 37 | 80 | 81 | 82 | 83 | 84 | 85 | | 86 | + * |---------| |-------------------------------------------------------------------------------------. + * | 40 | 41 | | 42 | 43 | 44 | 45 | 46 | 47 | 90 | | 91 | 92 | 93 | + * `---------' `--------------------------------------------------------------------' `--------------' + */ + // The first section contains all of the arguements + // The second converts the arguments into a two-dimensional array + #define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k56, k57, k94, k95, \ + k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k66, k67, k96, k97, \ + k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k74, k75, k76, \ + k30, k31, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k84, k85, k86, \ + k40, k41, k42, k43, k44, k45, k46, k47, k90, k91, k92, k93 \ + ) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, }, \ + { k50, k51, k52, k53, k54, k55, k56, k57, }, \ + { k60, k61, k62, k63, k64, k65, k66, k67, }, \ + { k70, k71, k72, k73, k74, k75, k76, KC_NO,}, \ + { k80, k81, k82, k83, k84, k85, k86, KC_NO,}, \ + { k90, k91, k92, k93, k94, k95, k96, k97, }, \ + } +#else + /* RevC/D Keymap */ + // This a shortcut to help you visually see your layout. + /* + * ,---------. ,-----------------------------------------------------------------------. ,---------. + * | 11 | 12 | | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1A | 1B | 1C | 1D | 1E | 1F | 1G | | 1H | 1I | + * |---------| |-----------------------------------------------------------------------| |---------| + * | 21 | 22 | | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A | 2B | 2C | 2D | 2E | 2F | 2G | | 2H | 2I | + * |---------| |-----------------------------------------------------------------------| `---------' + * | 31 | 32 | | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 3A | 3B | 3C | 3D | 3E | 3F | + * |---------| |-----------------------------------------------------------------------| ,----. + * | 41 | 42 | | 43 | 45 | 46 | 47 | 48 | 49 | 4A | 4B | 4C | 4D | 4E | 4F | | 4H | + * |---------| |-------------------------------------------------------------------------------------. + * | 51 | 52 | | 53 | 54 | 55 | 59 | 5D | 5E | 5F | | 5G | 5H | 5I | + * `---------' `--------------------------------------------------------------------' `--------------' + */ + // The first section contains all of the arguements + // The second converts the arguments into a two-dimensional array + #define KEYMAP( \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, \ + k41, k42, k43, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4H, \ + k51, k52, k53, k54, k55, k59, k5D, k5E, k5F, k5G, k5H, k5I \ + ) { \ + {k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I}, \ + {k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I}, \ + {k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, KC_NO, KC_NO, KC_NO}, \ + {k41, k42, k43, KC_NO, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, KC_NO, k4H, KC_NO}, \ + {k51, k52, k53, k54, k55, KC_NO, KC_NO, KC_NO, k59, KC_NO, KC_NO, KC_NO, k5D, k5E, k5F, k5G, k5H, k5I} \ + } + + #define SPLIT_SHIFT_KEYMAP( \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, \ + k41, k42, k43, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G, k4H, \ + k51, k52, k53, k54, k55, k59, k5D, k5E, k5F, k5G, k5H, k5I \ + ) { \ + {k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I}, \ + {k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I}, \ + {k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, KC_NO, KC_NO, KC_NO}, \ + {k41, k42, k43, KC_NO, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G, k4H, KC_NO}, \ + {k51, k52, k53, k54, k55, KC_NO, KC_NO, KC_NO, k59, KC_NO, KC_NO, KC_NO, k5D, k5E, k5F, k5G, k5H, k5I} \ + } + + #define ISO_KEYMAP( \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, \ + k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4H, \ + k51, k52, k53, k54, k55, k59, k5D, k5E, k5F, k5G, k5H, k5I \ + ) { \ + {k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I}, \ + {k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I}, \ + {k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, KC_NO, KC_NO, KC_NO}, \ + {k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, KC_NO, k4H, KC_NO}, \ + {k51, k52, k53, k54, k55, KC_NO, KC_NO, KC_NO, k59, KC_NO, KC_NO, KC_NO, k5D, k5E, k5F, k5G, k5H, k5I} \ + } + +#endif //LFK_REV_B + +#endif //LFK78_H diff --git a/keyboards/lfkeyboards/lfk78/readme.md b/keyboards/lfkeyboards/lfk78/readme.md new file mode 100644 index 0000000000..e05390f9c3 --- /dev/null +++ b/keyboards/lfkeyboards/lfk78/readme.md @@ -0,0 +1,14 @@ +LFK78/68 +=== + +A 65% keyboard similar to the MagicForce68 or VA68M. Optional fuction key block on left side. + +Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards) +Hardware Supported: LFK78/68 RevB - RevJ, SMK78/68 +Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/) + +Make example for this keyboard (after setting up your build environment): + + make lfkeyboards/lfk78:default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
\ No newline at end of file diff --git a/keyboards/lfkeyboards/lfk78/rules.mk b/keyboards/lfkeyboards/lfk78/rules.mk new file mode 100644 index 0000000000..091cd77556 --- /dev/null +++ b/keyboards/lfkeyboards/lfk78/rules.mk @@ -0,0 +1,34 @@ +# Set the LFK78 hardware version. +# +# B - first public release, uses atmega32u4, has audio, ISSI matrix split between RGB and backlight +# C-H - at90usb1286, no audio, ISSI device 0 is backlight, 4 is RGB +# J - at90usb646, C6 audio, ISSI device 0 is backlight, 4 is RGB +LFK_REV = J + +ifeq ($(LFK_REV), B) + MCU = atmega32u4 + OPT_DEFS += -DBOOTLOADER_SIZE=4096 +else ifeq ($(LFK_REV), J) + MCU = at90usb646 + OPT_DEFS += -DBOOTLOADER_SIZE=4096 +else + MCU = at90usb1286 + OPT_DEFS += -DBOOTLOADER_SIZE=8192 +endif +OPT_DEFS += -DLFK_REV_$(LFK_REV) +OPT_DEFS += -DLFK_REV_STRING=\"Rev$(LFK_REV)\" + +# Extra source files for IS3731 lighting +SRC = TWIlib.c issi.c lighting.c + +# Processor frequency. +F_CPU = 16000000 + +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT diff --git a/keyboards/lfkeyboards/lfk87/config.h b/keyboards/lfkeyboards/lfk87/config.h new file mode 100644 index 0000000000..84357450b3 --- /dev/null +++ b/keyboards/lfkeyboards/lfk87/config.h @@ -0,0 +1,173 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER LFKeyboards +#define PRODUCT LFK87 +#define DESCRIPTION QMK keyboard firmware for LFK87 + +#define DIODE_DIRECTION COL2ROW + + +#ifdef LFK_TKL_REV_A +/* RevB Matrix config */ + #define MATRIX_ROWS 6 + #define MATRIX_COLS 17 + #define MATRIX_ROW_PINS {D2, D3, D4, D5, D6, D7 } + #define MATRIX_COL_PINS {A0, A1, A2, A3, A4, A5, A6, A7, E6, E7,\ + F0, F1, F2, F3, C0, C1, C2 } + #define UNUSED_PINS {B0, B1, B2, B3, B4, B4, B5, B6, B7, C4, C5, C6, C7,\ + D0, D1, E0, E1, E2, E3, E4, F4, F5, F6, F7} + #define RGBLED_NUM 25 // Number of LEDs +#else +/* RevC/D Matrix config */ + #define MATRIX_ROWS 7 + #define MATRIX_COLS 16 + #define MATRIX_ROW_PINS {F2, D7, D6, D5, D4, D3, F3} + #define MATRIX_COL_PINS {A0, A1, A2, A3, A4, A5, A6, A7, C7, C1, C0, E1, E0, C2, C3, C4} + #define UNUSED_PINS {B0, B1, B2, B3, B4, B4, B5, B6, B7, C5, C6, D2, E3, E4, E5, E6, E7, \ + F0, F1, F4, F5, F6, F7} + #define RGBLED_NUM 24 // Number of LEDs +#endif + +#define AUDIO_VOICES +#define C6_AUDIO + +#define BACKLIGHT_LEVELS 10 +#define BACKLIGHT_PWM_MAP {2, 4, 8, 16, 40, 55, 70, 128, 200, 255} + +#define RGB_DI_PIN F4 // Have to set it to something to get the ws2812 code to compile +#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#define TAPPING_TERM 200 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/lfkeyboards/lfk87/keymaps/default/config.h b/keyboards/lfkeyboards/lfk87/keymaps/default/config.h new file mode 100644 index 0000000000..8893d122e0 --- /dev/null +++ b/keyboards/lfkeyboards/lfk87/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/lfkeyboards/lfk87/keymaps/default/keymap.c b/keyboards/lfkeyboards/lfk87/keymaps/default/keymap.c new file mode 100644 index 0000000000..79affb51c3 --- /dev/null +++ b/keyboards/lfkeyboards/lfk87/keymaps/default/keymap.c @@ -0,0 +1,133 @@ +#include "lfk87.h" +#include "issi.h" +#include "lighting.h" +#include "action_layer.h" + +//Define a shorter 'transparent' key code to make the keymaps more compact +#define KC_TR KC_TRNS + +enum keymap_layout { + VANILLA = 0, // matches MF68 layout + FUNC, // 0x08 + SETTINGS, // 0x10 +}; + +// Colors of the layer indicator LED +// This list needs to define layer 0xFFFFFFFF, it is the end of the list, and the unknown layer +const Layer_Info layer_info[] = { + // Layer Mask Red Green Blue + {0x00000000, 0xFFFFFFFF, {0x00, 0xFF, 0x00}}, // base layers - green + {0x00000002, 0xFFFFFFFE, {0x00, 0x00, 0xFF}}, // function layer - blue + {0x00000004, 0xFFFFFFFC, {0xFF, 0x00, 0xFF}}, // settings layer - magenta + {0xFFFFFFFF, 0xFFFFFFFF, {0xFF, 0xFF, 0xFF}}, // unknown layer - REQUIRED - white +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[VANILLA] = KEYMAP( + /* Keymap VANILLA: (Base Layer) Default Layer + * ,-----------------------------------------------------------------------------. + * |Esc |f1| f2| f3| f4| | f5| f6| f7| f8| | f9|f10|f11|f12| |Prnt|ScLk|Paus| + * |-----------------------------------------------------------| |--------------| + * | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backsp | | Ins|Home|PgUp| + * |-----------------------------------------------------------| |--------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | Del| End|PgDn| + * |-----------------------------------------------------------| `--------------' + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| ,----. + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | | Up | + * |-----------------------------------------------------------| ,-------------. + * |Ctrl|Gui |Alt | Space |ALT |GUI |Func|CTRL | |Lft| Dn |Rig | + * `-----------------------------------------------------------' `-------------' + */ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DELETE, KC_END, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(FUNC), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + /* Keymap FUNCTION: Function Layer + * ,-------------------------------------------------------------. ,--------------. + * |Esc |f1| f2| f3| f4| | f5| f6| f7| f8| | f9|f10|f11|f12 | |Prnt|ScLk|Paus| + * |-------------------------------------------------------------| |--------------| + * | ` |F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Delete | | | | | + * |-------------------------------------------------------------| |--------------| + * |Tab | |PgU| | | | | | Up| | | | | | | | | | + * |-------------------------------------------------------------| `--------------' + * |Control|Hme|PgD|End| | | |Lft|Dwn|Rgt| | | | + * |-------------------------------------------------------------| ,----. + * |Shift | |Del| | | | |Mute|V- |V+ | |TG(SETTINGS)| | Up | + * |-------------------------------------------------------------' ,-------------. + * |Func|Win |Alt | PgD |Alt |Ctrl |Func | |Lft| Dn |Rig | + * `------------------------------------------------------' `-------------' + */ +[FUNC] = KEYMAP( + KC_ESC, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_DEL, KC_TR, KC_TR, KC_TR, \ + KC_NO,KC_NO, KC_PGUP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TR, KC_TR, KC_TR, \ + KC_TR, KC_HOME, KC_PGDN, KC_END, KC_NO, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, \ + KC_TR, KC_NO, KC_DEL, KC_NO, KC_NO, KC_NO, KC_NO, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, TG(SETTINGS), KC_TR, \ + KC_TR, KC_TR, KC_TR, KC_PGDN, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR), + + /* Keymap SETTINGS: Settings Layer + * ,-----------------------------------------------------------. ,-------------. + * |Esc |f1| f2| f3| f4| | f5| f6| f7| f8| | f9|f10|f11|f12 | |Prnt|ScLk|Paus| + * |-------------------------------------------------------------| |--------------| + * |FN0 | | | | | | | | | | |BL-|BL+|BL Togl| |RGB Tog |Val+| + * |-----------------------------------------------------------| |-------------| + * |MuMode| | | | | | | | | | | | |LEDTst| |RGB Mode|Val-| + * |-----------------------------------------------------------| `-------------' + * |AudTgl |Hz+|MS+| | | | | | | | | | RST | + * |-----------------------------------------------------------| ,----. + * |ClickTgl|Hz-|MS-| | | | | | | | |Layer Clr | |Hue+| + * |--------------------------------------------------------------------------. + * | | | | | | | | | |Sat-|Hue-|Sat+| + * `----------------------------------------------------------------------------' + */ +[SETTINGS] = KEYMAP( + KC_FN0, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_DEC, KC_NO, KC_NO, KC_NO, + KC_FN0,KC_NO,KC_NO,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_DEC, BL_INC, BL_TOGG, RGB_TOG, RGB_VAI, KC_NO, + MU_MOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_FN2, RGB_MOD, RGB_VAD, KC_NO, + AU_TOG, KC_F1,KC_FN3, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RESET, + KC_FN5, KC_FN2,KC_FN4, KC_NO, KC_NO, KC_NO, KC_NO, MU_TOG, KC_NO, KC_NO, KC_NO, KC_NO, RGB_HUI, + KC_NO, KC_NO, KC_NO, KC_FN12, KC_NO, KC_NO, KC_NO, KC_TR, RGB_SAD, RGB_HUD, RGB_SAI), +}; + +const uint16_t PROGMEM fn_actions[] = { + ACTION_FUNCTION(LFK_CLEAR), // FN0 - reset layers + ACTION_FUNCTION(LFK_CLICK_FREQ_HIGHER), // FN1 - Increase Freq of audio click + ACTION_FUNCTION(LFK_CLICK_FREQ_LOWER), // FN2 - Decrease Freq of audio click + ACTION_FUNCTION(LFK_CLICK_TIME_LONGER), // FN3 - Increase length of audio click + ACTION_FUNCTION(LFK_CLICK_TIME_SHORTER), // FN4 - Decrease length of audio click + ACTION_FUNCTION(LFK_CLICK_TOGGLE), // FN5 - Toggle audio click + }; + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + // This keymap only has a single base layer, so reset the default if needed + if(eeconfig_read_default_layer() > 1){ + eeconfig_update_default_layer(1); + default_layer_set(1); + } +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk b/keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk new file mode 100644 index 0000000000..c1f1070fd6 --- /dev/null +++ b/keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk @@ -0,0 +1,54 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# + +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable RGB underlight +RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 +SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +TAP_DANCE_ENABLE = no + +ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled +WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms + + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif + +ifeq ($(strip $(ISSI_ENABLE)), yes) + TMK_COMMON_DEFS += -DISSI_ENABLE +endif + +ifeq ($(strip $(WATCHDOG_ENABLE)), yes) + TMK_COMMON_DEFS += -DWATCHDOG_ENABLE +endif + + +# Override the LFK87 hardware version. +# +# A - Green PCB. at90usb1286 Only 3 exist +# B - We don't talk about RevB +# C-D - Black PCB. at90usb646 First public release +# +# LFK_REV = C + +# ifeq ($(LFK_REV), A) +# MCU = at90usb1286 +# OPT_DEFS += -DBOOTLOADER_SIZE=8192 +# else +# MCU = at90usb646 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 +# endif +# OPT_DEFS += -DLFK_TKL_REV_$(LFK_REV) diff --git a/keyboards/lfkeyboards/lfk87/keymaps/iso/config.h b/keyboards/lfkeyboards/lfk87/keymaps/iso/config.h new file mode 100644 index 0000000000..8893d122e0 --- /dev/null +++ b/keyboards/lfkeyboards/lfk87/keymaps/iso/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/lfkeyboards/lfk87/keymaps/iso/keymap.c b/keyboards/lfkeyboards/lfk87/keymaps/iso/keymap.c new file mode 100644 index 0000000000..10248e08cd --- /dev/null +++ b/keyboards/lfkeyboards/lfk87/keymaps/iso/keymap.c @@ -0,0 +1,137 @@ +#include "lfk87.h" +#include "issi.h" +#include "lighting.h" +#include "action_layer.h" + +//Define a shorter 'transparent' key code to make the keymaps more compact +#define KC_TR KC_TRNS + +enum keymap_layout { + VANILLA = 0, + FUNC, // 0x02 + SETTINGS, // 0x04 +}; + +// Colors of the layer indicator LED +// This list needs to define layer 0xFFFFFFFF, it is the end of the list, and the unknown layer +const Layer_Info layer_info[] = { + // Layer Mask Red Green Blue + {0x00000000, 0xFFFFFFFF, {0x00, 0x00, 0x00}}, // base layer - off + {0x00000002, 0xFFFFFFFE, {0x00, 0x00, 0x7F}}, // function layer - blue + {0x00000004, 0xFFFFFFFC, {0x7F, 0x00, 0x00}}, // settings layer - red + {0xFFFFFFFF, 0xFFFFFFFF, {0x0F, 0x0F, 0x0F}}, // unknown layer - REQUIRED - white +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[VANILLA] = ISO_KEYMAP( + /* Keymap VANILLA: (Base Layer) Default Layer + * ,-----------------------------------------------------------------------------. + * |Esc |f1| f2| f3| f4| | f5| f6| f7| f8| | f9|f10|f11|f12| |Prnt|ScLk|Paus| + * |-----------------------------------------------------------| |--------------| + * | ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backsp | | Ins|Home|PgUp| + * |-----------------------------------------------------------| |--------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Ret| | Del| End|PgDn| + * |--------------------------------------------------------. | `--------------' + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '| # | | + * |-----------------------------------------------------------| ,----. + * |Shft| \ | Z| X| C| V| B| N| M| ,| .| /|Shift | | Up | + * |-----------------------------------------------------------| ,-------------. + * |Ctrl|Gui |Alt | Space |ALT |GUI | Func|CTRL| |Lft| Dn |Rig | + * `-----------------------------------------------------------' `-------------' + */ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_LSCR, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_DELETE, KC_END, KC_PGDN, \ + KC_LCAP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(FUNC), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + /* Keymap FUNCTION: Function Layer + * ,-------------------------------------------------------------. ,--------------. + * | |f1| f2| f3| f4| | f5| f6| f7| f8| | f9|f10|f11|f12 | |Prnt|ScLk|Paus| + * |-------------------------------------------------------------| |--------------| + * | |F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Delete | | | | | + * |-------------------------------------------------------------| |--------------| + * |Tab | |PgU| | | | | | Up| | | | | | | | | | | + * |---------------------------------------------------------. | `--------------' + * |Control|Hme|PgD|End| | | |Lft|Dwn|Rgt| | | | | + * |-------------------------------------------------------------| ,----. + * |Shift| | |Del| | | | |Mute|V- |V+ | |TG(SETTINGS)| | Up | + * |-------------------------------------------------------------' ,-------------. + * |Func|Win |Alt | PgD |ALT |GUI | Func|CTRL| |Lft| Dn |Rig | + * `-------------------------------------------------------------' `-------------' + */ +[FUNC] = ISO_KEYMAP( + KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_DEL, KC_TR, KC_TR, KC_TR, \ + KC_NO,KC_NO, KC_PGUP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TR, KC_TR, KC_TR, \ + KC_TR, KC_HOME, KC_PGDN, KC_END, KC_NO, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, \ + KC_TR,KC_NO, KC_NO, KC_DEL, KC_NO, KC_NO, KC_NO, KC_NO, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, TG(SETTINGS), KC_TR, \ + KC_TR, KC_TR, KC_TR, KC_PGDN, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR), + + /* Keymap SETTINGS: Settings Layer + * ,-----------------------------------------------------------. ,-------------. + * |Esc |f1| f2| f3| f4| | f5| f6| f7| f8| | f9|f10|f11|f12 | |Prnt|ScLk|Paus| + * |-------------------------------------------------------------| |--------------| + * |FN3 |BL0|BL1|BL2|BL3| | | | | | |BL-|BL+|BL Togl| |RGB Tog |Val+| + * |-----------------------------------------------------------| |-------------| + * |Debug| | | | | | | | | | | | | RST | |RGB Mode|Val-| + * |--------------------------------------------------------. | `-------------' + * |LayrClr|Hz+|MS+| | | | | | | | | | | | + * |-----------------------------------------------------------| ,----. + * |ClickTgl|Hz-|MS-| | | | | | | | |Layer Clr | |Hue+| + * |------------------------------------------------------------------------. + * | | | | | | | | |Sat-|Hue-|Sat+| + * `------------------------------------------------------' `--------------' + */ +[SETTINGS] = ISO_KEYMAP( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_DEC, KC_NO, KC_NO, KC_NO, + KC_FN0,KC_FN3,KC_FN4,KC_FN5, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_DEC, BL_INC, BL_TOGG, RGB_TOG, RGB_VAI, KC_NO, + MU_MOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RESET, RGB_MOD, RGB_VAD, KC_NO, + AU_TOG, KC_FN3,KC_FN5, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_FN7, KC_NO, KC_FN4, KC_FN6, KC_NO, KC_NO, KC_NO, KC_NO, MU_TOG, KC_NO, KC_NO, KC_NO, KC_FN0, RGB_HUI, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_FN0, RGB_SAD, RGB_HUD, RGB_SAI), +}; + +const uint16_t PROGMEM fn_actions[] = { + ACTION_FUNCTION(LFK_CLEAR), // FN0 - reset layers + ACTION_FUNCTION(LFK_ESC_TILDE), // FN1 - esc+shift = ~, else escape + ACTION_FUNCTION(LFK_LED_TEST), // FN2 - cycle through LEDs for testing + ACTION_FUNCTION(LFK_CLICK_FREQ_HIGHER), // FN3 - Increase Freq of audio click + ACTION_FUNCTION(LFK_CLICK_FREQ_LOWER), // FN4 - Decrease Freq of audio click + ACTION_FUNCTION(LFK_CLICK_TIME_LONGER), // FN5 - Increase length of audio click + ACTION_FUNCTION(LFK_CLICK_TIME_SHORTER), // FN6 - Decrease length of audio click + ACTION_FUNCTION(LFK_CLICK_TOGGLE), // FN7 - Toggle audio click + ACTION_FUNCTION(LFK_LED_TEST), // FN8 - cycle through LEDs for testing + ACTION_FUNCTION(LFK_DEBUG_SETTINGS), // FN9 - prints LED and click settings to HID + }; + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + // This keymap only has a single base layer, so reset the default if needed + if(eeconfig_read_default_layer() > 1){ + eeconfig_update_default_layer(1); + default_layer_set(1); + } +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk b/keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk new file mode 100644 index 0000000000..68e200a5de --- /dev/null +++ b/keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk @@ -0,0 +1,53 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# + +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable RGB underlight +RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 +SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +TAP_DANCE_ENABLE = no + +ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled +WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms + + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif + +ifeq ($(strip $(ISSI_ENABLE)), yes) + TMK_COMMON_DEFS += -DISSI_ENABLE +endif + +ifeq ($(strip $(WATCHDOG_ENABLE)), yes) + TMK_COMMON_DEFS += -DWATCHDOG_ENABLE +endif + + +# # Set the LFK78 hardware version. This is defined in rules.mk, but can be overidden here if desired +# # +# # RevB - first public release, uses atmega32u4, has audio, ISSI matrix split between RGB and backlight +# # RevC/D - at90usb1286, no audio, ISSI device 0 is backlight, 4 is RGB +# # +# # Set to B, C or D +# LFK_REV = D + +# ifeq ($(LFK_REV), B) +# MCU = atmega32u4 +# else +# MCU = at90usb1286 +# endif +# OPT_DEFS += -DLFK_REV_$(LFK_REV) +# OPT_DEFS += -DUSB_PRODUCT=\"LFK_Rev$(LFK_REV)\" diff --git a/keyboards/lfkeyboards/lfk87/lfk87.c b/keyboards/lfkeyboards/lfk87/lfk87.c new file mode 100644 index 0000000000..831d9d2815 --- /dev/null +++ b/keyboards/lfkeyboards/lfk87/lfk87.c @@ -0,0 +1,215 @@ + +#include <avr/sfr_defs.h> +#include <avr/timer_avr.h> +#include <avr/wdt.h> +#include "lfk87.h" +#include "keymap.h" +#include "issi.h" +#include "TWIlib.h" +#include "lighting.h" +#include "debug.h" +#include "quantum.h" + +uint16_t click_hz = CLICK_HZ; +uint16_t click_time = CLICK_MS; +uint8_t click_toggle = CLICK_ENABLED; + +void matrix_init_kb(void) +{ + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + set_rgb(31, 0x00, 0x00, 0x00); // Caps lock + set_rgb(32, 0xFF, 0x00, 0x00); // Layer indicator, start red +#ifndef AUDIO_ENABLE + // If we're not using the audio pin, drive it low + sbi(DDRC, 6); + cbi(PORTC, 6); +#endif +#ifdef ISSI_ENABLE + issi_init(); +#endif +#ifdef WATCHDOG_ENABLE + // This is done after turning the layer LED red, if we're caught in a loop + // we should get a flashing red light + wdt_enable(WDTO_500MS); +#endif +} + +void matrix_scan_kb(void) +{ +#ifdef WATCHDOG_ENABLE + wdt_reset(); +#endif +#ifdef ISSI_ENABLE + // switch/underglow lighting update + static uint32_t issi_device = 0; + static uint32_t twi_last_ready = 0; + if(twi_last_ready > 1000){ + // Its been way too long since the last ISSI update, reset the I2C bus and start again + twi_last_ready = 0; + TWIInit(); + force_issi_refresh(); + } + if(isTWIReady()){ + twi_last_ready = 0; + // If the i2c bus is available, kick off the issi update, alternate between devices + update_issi(issi_device, issi_device); + if(issi_device){ + issi_device = 0; + }else{ + issi_device = 3; + } + }else{ + twi_last_ready++; + } +#endif + // Update layer indicator LED + // + // Not sure how else to reliably do this... TMK has the 'hook_layer_change' + // but can't find QMK equiv + static uint32_t layer_indicator = -1; + if(layer_indicator != layer_state){ + for(uint32_t i=0;; i++){ + // the layer_info list should end with layer 0xFFFF + // it will break this out of the loop and define the unknown layer color + if((layer_info[i].layer == (layer_state & layer_info[i].mask)) || (layer_info[i].layer == 0xFFFFFFFF)){ + set_rgb(32, layer_info[i].color.red, layer_info[i].color.green, layer_info[i].color.blue); + layer_indicator = layer_state; + break; + } + } + } + matrix_scan_user(); +} + +void click(uint16_t freq, uint16_t duration){ +#ifdef AUDIO_ENABLE + if(freq >= 100 && freq <= 20000 && duration < 100){ + play_note(freq, 10); + for (uint16_t i = 0; i < duration; i++){ + _delay_ms(1); + } + stop_all_notes(); + } +#endif +} + +bool process_record_kb(uint16_t keycode, keyrecord_t* record) +{ + if (click_toggle && record->event.pressed){ + click(click_hz, click_time); + } + if (keycode == RESET) { + reset_keyboard_kb(); + } else { + } + return process_record_user(keycode, record); +} + +void action_function(keyrecord_t *event, uint8_t id, uint8_t opt) +{ +#ifdef AUDIO_ENABLE + int8_t sign = 1; +#endif + if(id == LFK_ESC_TILDE){ + // Send ~ on shift-esc + void (*method)(uint8_t) = (event->event.pressed) ? &add_key : &del_key; + uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)); + method(shifted ? KC_GRAVE : KC_ESCAPE); + send_keyboard_report(); + }else if(event->event.pressed){ + switch(id){ + case LFK_SET_DEFAULT_LAYER: + // set/save the current base layer to eeprom, falls through to LFK_CLEAR + eeconfig_update_default_layer(1UL << opt); + default_layer_set(1UL << opt); + case LFK_CLEAR: + // Go back to default layer + layer_clear(); + break; +#ifdef ISSI_ENABLE + case LFK_LED_TEST: + led_test(); + break; +#endif +#ifdef AUDIO_ENABLE + case LFK_CLICK_FREQ_LOWER: + sign = -1; // continue to next statement + case LFK_CLICK_FREQ_HIGHER: + click_hz += sign * 100; + click(click_hz, click_time); + break; + case LFK_CLICK_TOGGLE: + if(click_toggle){ + click_toggle = 0; + click(4000, 100); + click(1000, 100); + }else{ + click_toggle = 1; + click(1000, 100); + click(4000, 100); + } + break; + case LFK_CLICK_TIME_SHORTER: + sign = -1; // continue to next statement + case LFK_CLICK_TIME_LONGER: + click_time += sign; + click(click_hz, click_time); + break; +#endif + } + } +} + +void reset_keyboard_kb(){ +#ifdef WATCHDOG_ENABLE + MCUSR = 0; + wdt_disable(); + wdt_reset(); +#endif + set_rgb(31, 0x00, 0xFF, 0xFF); + set_rgb(32, 0x00, 0xFF, 0xFF); + force_issi_refresh(); + reset_keyboard(); +} + +void led_set_kb(uint8_t usb_led) +{ + // Set capslock LED to Blue + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + set_rgb(31, 0x00, 0x00, 0x7F); + }else{ + set_rgb(31, 0x00, 0x00, 0x00); + } + led_set_user(usb_led); +} + +// Lighting info, see lighting.h for details +const uint8_t switch_matrices[] = {0, 1}; +const uint8_t rgb_matrices[] = {6, 7}; + +// RGB Map: +// 27 29 10 9 8 7 6 +// 26 5 +// 25 4 +// 24 3 +// 23 22 21 20 14 15 11 1 2 +const uint8_t rgb_sequence[] = { + 27, 29, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 11, 15, 14, 20, 21, 22, 23, 24, 25, 26 +}; + +// Maps switch LEDs from Row/Col to ISSI matrix. +// Value breakdown: +// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | +// | | ISSI Col | ISSI Row | +// / | +// Device +const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] = +KEYMAP( + 0x19, 0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x99, 0x98, 0x97, 0x96, 0x95, 0x94, 0x93, 0x92, 0x91, + 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5, 0xA4, 0xA3, 0xA2, 0xA1, + 0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5, 0xB3, + 0x49, 0x48, 0x47, 0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6, 0xC5, 0xC4, 0xC2, + 0x59, 0x58, 0x57, 0x56, 0x55, 0x51, 0xD6, 0xE5, 0xE4, 0xE3, 0xE2, 0xE1, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00); diff --git a/keyboards/lfkeyboards/lfk87/lfk87.h b/keyboards/lfkeyboards/lfk87/lfk87.h new file mode 100644 index 0000000000..cf16c8e2f3 --- /dev/null +++ b/keyboards/lfkeyboards/lfk87/lfk87.h @@ -0,0 +1,139 @@ +#ifndef LFK87_H +#define LFK87_H + +/* if the kb.h file exists (because we're running from qmkbuilder) include it */ +#if __has_include("kb.h") +#include "kb.h" +#endif + +#include "quantum.h" +#include "matrix.h" +#include <avr/sfr_defs.h> + +#ifndef cbi +#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) +#endif + +#ifndef sbi +#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + + +typedef struct RGB_Color { + uint16_t red; + uint16_t green; + uint16_t blue; +} RGB_Color; + +typedef struct Layer_Info { + uint32_t layer; + uint32_t mask; + RGB_Color color; +} Layer_Info; + +extern const uint32_t layer_count; +extern const Layer_Info layer_info[]; + +enum action_functions { + LFK_CLEAR = 0, // Resets all layers + LFK_ESC_TILDE, // esc+lshift = ~ + LFK_SET_DEFAULT_LAYER, // changes and saves current base layer to eeprom + LFK_CLICK_TOGGLE, // Adjusts click duration + LFK_CLICK_FREQ_HIGHER, // Adjusts click frequency + LFK_CLICK_FREQ_LOWER, // Adjusts click frequency + LFK_CLICK_TIME_LONGER, // Adjusts click duration + LFK_CLICK_TIME_SHORTER, // Adjusts click duration + LFK_DEBUG_SETTINGS, // prints LED and click settings to HID + LFK_LED_TEST, // cycles through switch and RGB LEDs + LFK_PLAY_ONEUP +}; + +#define CLICK_HZ 500 +#define CLICK_MS 2 +#define CLICK_ENABLED 0 + +void reset_keyboard_kb(void); +void click(uint16_t freq, uint16_t duration); + +#define k00 KC_NO +#ifdef LFK_TKL_REV_A + #ifndef KEYMAP + #define KEYMAP( \ + k11, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2h, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g, k3h, \ + k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, \ + k51, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, k5c, k5d, k5g, \ + k61, k62, k63, k67, k6b, k6c, k6d, k6e, k6f, k6g, k6h \ + ) \ + { \ + {k11, k00, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h}, \ + {k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2h}, \ + {k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g, k3h}, \ + {k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k00, k00, k00, k00}, \ + {k51, k00, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, k5c, k5d, k00, k00, k5g, k00}, \ + {k61, k62, k63, k00, k00, k00, k67, k00, k00, k00, k6b, k6c, k6d, k6e, k6f, k6g, k6h}, \ + } + + #endif //!KEYMAP#endif + #ifndef ISO_KEYMAP + #define ISO_KEYMAP( \ + k11, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2h, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g, k3h, \ + k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, \ + k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, k5c, k5d, k5g, \ + k61, k62, k63, k67, k6b, k6c, k6d, k6e, k6f, k6g, k6h \ + ) \ + { \ + {k11, k00, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h}, \ + {k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2h}, \ + {k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g, k3h}, \ + {k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k00, k00, k00, k00}, \ + {k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, k5c, k5d, k00, k00, k5g, k00}, \ + {k61, k62, k63, k00, k00, k00, k67, k00, k00, k00, k6b, k6c, k6d, k6e, k6f, k6g, k6h}, \ + } + #endif //!ISO_KEYMAP +#else // RevC+ keymaps + #ifndef KEYMAP + #define KEYMAP( \ + k71, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, k1f, k1g, \ + k72, k73, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k2f, k2g, \ + k74, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g, \ + k61, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, \ + k62, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, k5c, k5f, \ + k63, k64, k65, k67, k6a, k6b, k6c, k6d, k6e, k6f, k6g \ + ) \ + { \ + {k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k00, k1e, k1f, k1g}, \ + {k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k00, k2e, k2f, k2g}, \ + {k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g}, \ + {k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k00, k00, k00, k00}, \ + {k00, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, k5c, k00, k00, k5f, k00}, \ + {k61, k62, k63, k64, k65, k00, k67, k00, k00, k6a, k6b, k6c, k6d, k6e, k6f, k6g}, \ + {k71, k72, k73, k74, k00, k00, k00, k00, k00, k00, k00, k00, k00, k00, k00, k00}, \ + } + + #endif //!KEYMAP#endif + #ifndef ISO_KEYMAP + #define ISO_KEYMAP( \ + k71, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, k1f, k1g, \ + k72, k73, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k2f, k2g, \ + k74, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g, \ + k61, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, \ + k62, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, k5c, k5f, \ + k63, k64, k65, k67, k6a, k6b, k6c, k6d, k6e, k6f, k6g \ + ) \ + { \ + {k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k00, k1e, k1f, k1g}, \ + {k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k00, k2e, k2f, k2g}, \ + {k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g}, \ + {k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k00, k00, k00, k00}, \ + {k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, k5c, k00, k00, k5f, k00}, \ + {k61, k62, k63, k64, k65, k00, k67, k00, k00, k6a, k6b, k6c, k6d, k6e, k6f, k6g}, \ + {k71, k72, k73, k74, k00, k00, k00, k00, k00, k00, k00, k00, k00, k00, k00, k00}, \ + } + #endif //!ISO_KEYMAP +#endif //Rev + +#endif //LFK87_H diff --git a/keyboards/lfkeyboards/lfk87/readme.md b/keyboards/lfkeyboards/lfk87/readme.md new file mode 100644 index 0000000000..15e5517103 --- /dev/null +++ b/keyboards/lfkeyboards/lfk87/readme.md @@ -0,0 +1,14 @@ +LFK87 +=== + +A standard TKL with RGB underglow, in switch backlighting and audio support. + +Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards) +Hardware Supported: LFK87, SMK87 +Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/) + +Make example for this keyboard (after setting up your build environment): + + make lfkeyboards/lfk87:default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
\ No newline at end of file diff --git a/keyboards/lfkeyboards/lfk87/rules.mk b/keyboards/lfkeyboards/lfk87/rules.mk new file mode 100644 index 0000000000..ec550d2755 --- /dev/null +++ b/keyboards/lfkeyboards/lfk87/rules.mk @@ -0,0 +1,31 @@ +# Set the LFK87 hardware version. +# +# A - Green PCB. at90usb1286 Only 3 exist +# B - We don't talk about RevB +# C-D - Black PCB. at90usb646 First public release +# +LFK_REV = C + +ifeq ($(LFK_REV), A) + MCU = at90usb1286 + OPT_DEFS += -DBOOTLOADER_SIZE=8192 +else + MCU = at90usb646 + OPT_DEFS += -DBOOTLOADER_SIZE=4096 +endif +OPT_DEFS += -DLFK_TKL_REV_$(LFK_REV) + +# Extra source files for IS3731 lighting +SRC = TWIlib.c issi.c lighting.c + +# Processor frequency. +F_CPU = 16000000 + +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT diff --git a/keyboards/lfkeyboards/lfkeyboards.c b/keyboards/lfkeyboards/lfkeyboards.c new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/keyboards/lfkeyboards/lfkeyboards.c diff --git a/keyboards/lfkeyboards/lfkeyboards.h b/keyboards/lfkeyboards/lfkeyboards.h new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/keyboards/lfkeyboards/lfkeyboards.h diff --git a/keyboards/lfkeyboards/lighting.c b/keyboards/lfkeyboards/lighting.c new file mode 100644 index 0000000000..42d247ae70 --- /dev/null +++ b/keyboards/lfkeyboards/lighting.c @@ -0,0 +1,157 @@ +#ifdef ISSI_ENABLE + + +#include <avr/sfr_defs.h> +#include <avr/timer_avr.h> +#include <avr/wdt.h> +#include "quantum.h" +// #include "lfk87.h" +#include "issi.h" +#include "TWIlib.h" +#include "lighting.h" +#include "debug.h" +#include "rgblight.h" +#include "audio/audio.h" + + +extern rgblight_config_t rgblight_config; // Declared in rgblight.c + +const uint8_t backlight_pwm_map[BACKLIGHT_LEVELS] = BACKLIGHT_PWM_MAP; + +// RGB# to ISSI matrix, this is the same across all revisions +const uint8_t rgb_leds[][3][2] = { + {{0, 0}, {0, 0}, {0, 0}}, + {{1, 1}, {2, 3}, {2, 4}}, // RGB1/RGB17 + {{2, 1}, {2, 2}, {3, 4}}, // RGB2/RGB18 + {{3, 1}, {3, 2}, {3, 3}}, // RGB3/RGB19 + {{4, 1}, {4, 2}, {4, 3}}, // RGB4/RGB20 + {{5, 1}, {5, 2}, {5, 3}}, // RGB5/RGB21 + {{6, 1}, {6, 2}, {6, 3}}, // RGB6/RGB22 + {{7, 1}, {7, 2}, {7, 3}}, // RGB6/RGB23 + {{8, 1}, {8, 2}, {8, 3}}, // RGB8/RGB24 + {{1, 9}, {1, 8}, {1, 7}}, // RGB9/RGB25 + {{2, 9}, {2, 8}, {2, 7}}, // RGB10/RGB26 + {{3, 9}, {3, 8}, {3, 7}}, // RGB11/RGB27 + {{4, 9}, {4, 8}, {4, 7}}, // RGB12/RGB28 + {{5, 9}, {5, 8}, {5, 7}}, // RGB13/RGB29 + {{6, 9}, {6, 8}, {6, 7}}, // RGB14/RGB30 + {{7, 9}, {7, 8}, {6, 6}}, // RGB15/RGB31 + {{8, 9}, {7, 7}, {7, 6}} // RGB16/RGB32 + }; + +void set_rgb(uint8_t rgb_led, uint8_t red, uint8_t green, uint8_t blue){ +#ifdef RGBLIGHT_ENABLE + uint8_t matrix = rgb_matrices[0]; + if(rgb_led >= 17){ + matrix = rgb_matrices[1]; + rgb_led -= 16; + } + if(rgb_leds[rgb_led][0][1] != 0){ + activateLED(matrix, rgb_leds[rgb_led][0][0], rgb_leds[rgb_led][0][1], red); + } + if(rgb_leds[rgb_led][1][1] != 0){ + activateLED(matrix, rgb_leds[rgb_led][1][0], rgb_leds[rgb_led][1][1], green); + } + if(rgb_leds[rgb_led][2][1] != 0){ + activateLED(matrix, rgb_leds[rgb_led][2][0], rgb_leds[rgb_led][2][1], blue); + } +#endif +} + +void backlight_set(uint8_t level){ +#ifdef BACKLIGHT_ENABLE + uint8_t pwm_value = 0; + if(level >= BACKLIGHT_LEVELS){ + level = BACKLIGHT_LEVELS; + } + if(level > 0){ + pwm_value = backlight_pwm_map[level-1]; + } + for(int x = 1; x <= 9; x++){ + for(int y = 1; y <= 9; y++){ + activateLED(switch_matrices[0], x, y, pwm_value); + activateLED(switch_matrices[1], x, y, pwm_value); + } + } +#endif +} + +void set_underglow(uint8_t red, uint8_t green, uint8_t blue){ +#ifdef RGBLIGHT_ENABLE + for(uint8_t x = 1; x <= 32; x++){ + set_rgb(x, red, green, blue); + } +#endif +} + + +void rgblight_set(void) { +#ifdef RGBLIGHT_ENABLE + for(uint8_t i = 0; (i < sizeof(rgb_sequence)) && (i < RGBLED_NUM); i++){ + if(rgblight_config.enable){ + set_rgb(rgb_sequence[i], led[i].r, led[i].g, led[i].b); + }else{ + set_rgb(rgb_sequence[i], 0, 0, 0); + } + } +#endif +} + +void set_backlight_by_keymap(uint8_t col, uint8_t row){ +#ifdef RGBLIGHT_ENABLE + uint8_t lookup_value = switch_leds[row][col]; + uint8_t matrix = switch_matrices[0]; + if(lookup_value & 0x80){ + matrix = switch_matrices[1]; + } + issi_devices[0]->led_dirty = 1; + uint8_t led_col = (lookup_value & 0x70) >> 4; + uint8_t led_row = lookup_value & 0x0F; + activateLED(matrix, led_col, led_row, 255); +#endif +} + +void force_issi_refresh(){ +#ifdef ISSI_ENABLE + issi_devices[0]->led_dirty = true; + update_issi(0, true); + issi_devices[3]->led_dirty = true; + update_issi(3, true); +#endif +} + +void led_test(){ +#ifdef ISSI_ENABLE +#ifdef WATCHDOG_ENABLE + // This test take a long time to run, disable the WTD until its complete + wdt_disable(); +#endif + backlight_set(0); + set_underglow(0, 0, 0); + force_issi_refresh(); + set_underglow(0, 0, 0); + for(uint8_t x = 0; x < sizeof(rgb_sequence); x++){ + set_rgb(rgb_sequence[x], 255, 0, 0); + force_issi_refresh(); + _delay_ms(250); + set_rgb(rgb_sequence[x], 0, 255, 0); + force_issi_refresh(); + _delay_ms(250); + set_rgb(rgb_sequence[x], 0, 0, 255); + force_issi_refresh(); + _delay_ms(250); + set_rgb(rgb_sequence[x], 0, 0, 0); + force_issi_refresh(); + } +#ifdef WATCHDOG_ENABLE + wdt_enable(WDTO_250MS); +#endif +#endif +} + +void backlight_init_ports(void){ + issi_init(); +} + +#endif + diff --git a/keyboards/lfkeyboards/lighting.h b/keyboards/lfkeyboards/lighting.h new file mode 100644 index 0000000000..69e63268dd --- /dev/null +++ b/keyboards/lfkeyboards/lighting.h @@ -0,0 +1,53 @@ +#ifndef LIGHTING_H +#define LIGHTING_H + + +// rgb_sequence[RGBLED_NUM] +// +// Array used for sequential lighting effects. +// +// Example LFK78 RevC+ RGB Map: +// 27 29 10 9 8 7 6 +// 26 5 +// 25 4 +// 24 3 +// 23 22 21 20 14 15 11 1 2 +// +// const uint8_t rgb_sequence[] = { +// 27, 29, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, +// 11, 15, 14, 20, 21, 22, 23, 24, 25, 26 +// }; +extern const uint8_t rgb_sequence[RGBLED_NUM]; + +// switch_matrices[] +// +// The ISSI matrices for switch backlighting +// +// Example LFK78 RevC+ - ISSI Device 0, banks 0 and 1: +// switch_matrices[] = {0, 1}; +extern const uint8_t switch_matrices[]; + +// rgb_matrices[] +// The ISSI matrices for RGB Underglow +// +// Example LFK78 RevC+ - ISSI Device 3, banks 0 and 1: +// rgb_matrices[] = {6, 7}; +extern const uint8_t rgb_matrices[]; + +// switch_leds[MATRIX_ROWS][MATRIX_COLS] +// Maps switch LEDs from Row/Col to ISSI matrix. +// Value breakdown: +// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | +// | | ISSI Col | ISSI Row | +// | | +// Device +extern const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS]; + +void led_test(void); +void force_issi_refresh(void); +void set_backlight(uint8_t level); +void set_underglow(uint8_t red, uint8_t green, uint8_t blue); +void set_rgb(uint8_t rgb_led, uint8_t red, uint8_t green, uint8_t blue); +void set_backlight_by_keymap(uint8_t col, uint8_t row); + +#endif
\ No newline at end of file diff --git a/keyboards/lfkeyboards/rules.mk b/keyboards/lfkeyboards/rules.mk new file mode 100644 index 0000000000..5cf759a2fc --- /dev/null +++ b/keyboards/lfkeyboards/rules.mk @@ -0,0 +1 @@ +SRC = TWIlib.c issi.c lighting.c diff --git a/keyboards/lfkeyboards/smk65/config.h b/keyboards/lfkeyboards/smk65/config.h new file mode 100644 index 0000000000..78626416c8 --- /dev/null +++ b/keyboards/lfkeyboards/smk65/config.h @@ -0,0 +1,168 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6062 +#define DEVICE_VER 0x0001 +#define MANUFACTURER LFKeyboards +#define PRODUCT SMK65v2 +#define DESCRIPTION QMK keyboard firmware for SMK65 + +// RevA +// #define DIODE_DIRECTION COL2ROW +// #define MATRIX_ROWS 5 +// #define MATRIX_COLS 16 +// #define MATRIX_ROW_PINS {B7, F7, F6, F5, F4} +// #define MATRIX_COL_PINS {F0, F1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C7, B3, B2, B1, B0} +// #define UNUSED_PINS {} + +// RevB +#define DIODE_DIRECTION COL2ROW +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 +#define MATRIX_ROW_PINS {D6, D7, E0, C3, C4} +#define MATRIX_COL_PINS {F2, C5, E5, E4, B7, B6, B5, B4, B3, B2, B1, B0, E1, C0, C1, C2} +#define UNUSED_PINS {} +#define RGBLED_NUM 20 // Number of LEDs + +//RevB only: + +#define AUDIO_VOICES +#define C6_AUDIO +// #define B5_AUDIO + +#define BACKLIGHT_LEVELS 8 +#define BACKLIGHT_PWM_MAP {8, 16, 40, 55, 70, 128, 200, 255} + +#define RGB_DI_PIN C7 // Have to set it to something to get the ws2812 code to compile +#define RGBLED_NUM 20 // Number of LEDs +#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/lfkeyboards/smk65/keymaps/default/config.h b/keyboards/lfkeyboards/smk65/keymaps/default/config.h new file mode 100644 index 0000000000..8893d122e0 --- /dev/null +++ b/keyboards/lfkeyboards/smk65/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/lfkeyboards/smk65/keymaps/default/keymap.c b/keyboards/lfkeyboards/smk65/keymaps/default/keymap.c new file mode 100644 index 0000000000..97ca543b5e --- /dev/null +++ b/keyboards/lfkeyboards/smk65/keymaps/default/keymap.c @@ -0,0 +1,85 @@ +#include "smk65.h" +#include "action_layer.h" + +//Define a shorter 'transparent' key code to make the keymaps more compact +#define KC_TR KC_TRNS + +enum keymap_layout { + VANILLA = 0, + FUNC, + SETTINGS, +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[VANILLA] = KEYMAP( + /* Keymap VANILLA: (Base Layer) Default Layer + * ,------------------------------------------------------------.----. + * |Esc~| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backspa| Ins| + * |------------------------------------------------------------|----| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| Del| + * |------------------------------------------------------------|----| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |PgUp| + * |------------------------------------------------------------|----| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Up |PgDn| + * |-----------------------------------------------------------------| + * |Ctrl|Win |Alt | Space |Alt |Ctrl|Func|Lft| Dn |Rig | + * `-----------------------------------------------------------------' + */ + KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, MO(FUNC), KC_LEFT, KC_DOWN, KC_RGHT), + +[FUNC] = KEYMAP( + /* Keymap VANILLA: Function Layer + * ,------------------------------------------------------------.----. + * |Esc~| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backspa| Ins| + * |------------------------------------------------------------|----| + * |AudTgl| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| Del| + * |------------------------------------------------------------|----| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |PgUp| + * |------------------------------------------------------------|----| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Up |PgDn| + * |-----------------------------------------------------------------| + * |Ctrl|Win |Alt | Space |Alt |Ctrl|Func|Lft| Dn |Rig | + * `-----------------------------------------------------------------' + */ + KC_GRV,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, + AU_TOG, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, + KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, + KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, + KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR), +}; + +const uint16_t PROGMEM fn_actions[] = { + ACTION_FUNCTION(LFK_CLEAR), // FN0 - reset layers + ACTION_FUNCTION(LFK_ESC_TILDE), // FN1 - esc+shift = ~, else escape + }; + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/lfkeyboards/smk65/keymaps/default/rules.mk b/keyboards/lfkeyboards/smk65/keymaps/default/rules.mk new file mode 100644 index 0000000000..14ceebb77c --- /dev/null +++ b/keyboards/lfkeyboards/smk65/keymaps/default/rules.mk @@ -0,0 +1,36 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# + +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Disable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Disable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Disable RGB underlight +RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +TAP_DANCE_ENABLE = no + +ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled +WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms + + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif + +ifeq ($(strip $(ISSI_ENABLE)), yes) + TMK_COMMON_DEFS += -DISSI_ENABLE +endif + +ifeq ($(strip $(WATCHDOG_ENABLE)), yes) + TMK_COMMON_DEFS += -DWATCHDOG_ENABLE +endif diff --git a/keyboards/lfkeyboards/smk65/readme.md b/keyboards/lfkeyboards/smk65/readme.md new file mode 100644 index 0000000000..8265e36e68 --- /dev/null +++ b/keyboards/lfkeyboards/smk65/readme.md @@ -0,0 +1,14 @@ +SMK65 +=== + +65% layout based on Mat3o's Whitefox, but with support for SMK switches. + +Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards) +Hardware Supported: SMK65 +Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/) + +Make example for this keyboard (after setting up your build environment): + + make lfkeyboards/smk65:default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
\ No newline at end of file diff --git a/keyboards/lfkeyboards/smk65/rules.mk b/keyboards/lfkeyboards/smk65/rules.mk new file mode 100644 index 0000000000..b7f94154a4 --- /dev/null +++ b/keyboards/lfkeyboards/smk65/rules.mk @@ -0,0 +1,17 @@ +MCU = at90usb646 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Extra source files for IS3731 lighting +SRC = TWIlib.c issi.c lighting.c + +# Processor frequency. +F_CPU = 16000000 + +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT diff --git a/keyboards/lfkeyboards/smk65/smk65.c b/keyboards/lfkeyboards/smk65/smk65.c new file mode 100644 index 0000000000..d3654b8808 --- /dev/null +++ b/keyboards/lfkeyboards/smk65/smk65.c @@ -0,0 +1,164 @@ +#include <avr/sfr_defs.h> +#include <avr/timer_avr.h> +#include <avr/wdt.h> +#include "smk65.h" +#include "keymap.h" +#include "debug.h" +#include "issi.h" +#include "TWIlib.h" +#include "lighting.h" + +uint16_t click_hz = CLICK_HZ; +uint16_t click_time = CLICK_MS; +uint8_t click_toggle = CLICK_ENABLED; + + +void matrix_init_kb(void) +{ + matrix_init_user(); + +#ifdef AUDIO_ENABLE + // audio_init() sets PB5 to output and drives it low, which breaks our matrix + // so reset PB5 to input + cbi(DDRB, 5); + sbi(PORTB, 5); +#else + // If we're not using the audio pin, drive it low + sbi(DDRC, 6); + cbi(PORTC, 6); +#endif + +#ifdef ISSI_ENABLE + issi_init(); +#endif +} + +void matrix_scan_kb(void) +{ +#ifdef WATCHDOG_ENABLE + wdt_reset(); +#endif + matrix_scan_user(); +} + +void click(uint16_t freq, uint16_t duration){ +#ifdef AUDIO_ENABLE + if(freq >= 100 && freq <= 20000 && duration < 100){ + play_note(freq, 10); + for (uint16_t i = 0; i < duration; i++){ + _delay_ms(1); + } + stop_all_notes(); + } +#endif +} + +bool process_record_kb(uint16_t keycode, keyrecord_t* record) +{ + // Test code that turns on the switch led for the key that is pressed + // set_backlight_by_keymap(record->event.key.col, record->event.key.row); + if (click_toggle && record->event.pressed){ + click(click_hz, click_time); + } + if (keycode == RESET) { + reset_keyboard_kb(); + } else { + } + return process_record_user(keycode, record); +} + +void action_function(keyrecord_t *event, uint8_t id, uint8_t opt) +{ +#ifdef AUDIO_ENABLE + int8_t sign = 1; +#endif + if(id == LFK_ESC_TILDE){ + // Send ~ on shift-esc + void (*method)(uint8_t) = (event->event.pressed) ? &add_key : &del_key; + uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)); + method(shifted ? KC_GRAVE : KC_ESCAPE); + send_keyboard_report(); + }else if(event->event.pressed){ + switch(id){ + case LFK_SET_DEFAULT_LAYER: + // set/save the current base layer to eeprom, falls through to LFK_CLEAR + eeconfig_update_default_layer(1UL << opt); + default_layer_set(1UL << opt); + case LFK_CLEAR: + // Go back to default layer + layer_clear(); + break; +#ifdef AUDIO_ENABLE + case LFK_CLICK_FREQ_LOWER: + sign = -1; // continue to next statement + case LFK_CLICK_FREQ_HIGHER: + click_hz += sign * 100; + click(click_hz, click_time); + break; + case LFK_CLICK_TOGGLE: + if(click_toggle){ + click_toggle = 0; + click(4000, 100); + click(1000, 100); + }else{ + click_toggle = 1; + click(1000, 100); + click(4000, 100); + } + break; + case LFK_CLICK_TIME_SHORTER: + sign = -1; // continue to next statement + case LFK_CLICK_TIME_LONGER: + click_time += sign; + click(click_hz, click_time); + break; +#endif + case LFK_DEBUG_SETTINGS: + dprintf("Click:\n"); + dprintf(" toggle: %d\n", click_toggle); + dprintf(" freq(hz): %d\n", click_hz); + dprintf(" duration(ms): %d\n", click_time); + break; + } + } +} + +void reset_keyboard_kb(){ +#ifdef WATCHDOG_ENABLE + MCUSR = 0; + wdt_disable(); + wdt_reset(); +#endif + reset_keyboard(); +} + +void led_set_kb(uint8_t usb_led) +{ + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} + +// LFK lighting info +const uint8_t switch_matrices[] = {0, 1}; +const uint8_t rgb_matrices[] = {6, 7}; +// const uint8_t rgb_sequence[] = { +// 14, 24, 23, 22, 21, 20, 19, 18, 26, 25, 28, 29, +// 30, 31, 32, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 +// }; +const uint8_t rgb_sequence[] = { + 25, 28, 29, + 30, 31, 32, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 +}; +// Maps switch LEDs from Row/Col to ISSI matrix. +// Value breakdown: +// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | +// / \ ISSI Col | ISSI Row | +// matrix idx +// const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] = +// KEYMAP( +// 0x19, 0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x99, 0x98, 0x97, 0x96, 0x95, 0x94, 0x93, 0x92, 0x91, +// 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5, 0xA4, 0xA3, 0xA2, 0xA1, +// 0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5, 0xB3, +// 0x49, 0x48, 0x47, 0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6, 0xC5, 0xC4, 0xC2, +// 0x59, 0x58, 0x57, 0x56, 0x55, 0x51, 0xD6, 0xE5, 0xE4, 0xE3, 0xE2, 0xE1); diff --git a/keyboards/lfkeyboards/smk65/smk65.h b/keyboards/lfkeyboards/smk65/smk65.h new file mode 100644 index 0000000000..cb39a6c115 --- /dev/null +++ b/keyboards/lfkeyboards/smk65/smk65.h @@ -0,0 +1,90 @@ +#ifndef SMK65_H +#define SMK65_H + +/* if the kb.h file exists (because we're running from qmkbuilder) include it */ +#ifdef __has_include +#if __has_include("kb.h") +#include "kb.h" +#endif +#endif + +#include "quantum.h" +#include "matrix.h" +#include <avr/sfr_defs.h> + +#ifndef cbi +#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) +#endif + +#ifndef sbi +#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + + +typedef struct RGB_Color { + uint16_t red; + uint16_t green; + uint16_t blue; +} RGB_Color; + +typedef struct Layer_Info { + uint32_t layer; + uint32_t mask; + RGB_Color color; +} Layer_Info; + +extern const uint32_t layer_count; +extern const Layer_Info layer_info[]; + +enum action_functions { + LFK_CLEAR = 0, // Resets all layers + LFK_ESC_TILDE, // esc+lshift = ~ + LFK_SET_DEFAULT_LAYER, // changes and saves current base layer to eeprom + LFK_CLICK_TOGGLE, // Adjusts click duration + LFK_CLICK_FREQ_HIGHER, // Adjusts click frequency + LFK_CLICK_FREQ_LOWER, // Adjusts click frequency + LFK_CLICK_TIME_LONGER, // Adjusts click duration + LFK_CLICK_TIME_SHORTER, // Adjusts click duration + LFK_DEBUG_SETTINGS, // prints LED and click settings to HID + LFK_LED_TEST // cycles through switch and RGB LEDs +}; + +#define CLICK_HZ 500 +#define CLICK_MS 2 +#define CLICK_ENABLED 0 + +void reset_keyboard_kb(void); +void click(uint16_t freq, uint16_t duration); + +/* Vanilla Keymap */ +// This a shortcut to help you visually see your layout. +/* +* ,-------------------------------------------------------------------------------. +* | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1A | 1B | 1C | 1D | 1E | 1G | +* |-------------------------------------------------------------------------------| +* | 21 | 22 |23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A | 2B | 2C | 2D | 2F | 2G | +* |-------------------------------------------------------------------------------| +* | 31 | 32 |33 | 34 | 35 | 36 | 37 | 38 | 39 | 3A | 3B | 3C | 3F | 3G | +* |-------------------------------------------------------------------------------| +* | 41 | 42 |43 | 45 | 46 | 47 | 48 | 49 | 4A | 4B | 4C | 4D | 4F | 4G | +* |-------------------------------------------------------------------------------| +* | 51 | 52 | 53 | 57 | 5A | 5B | 5C | 5D | 5E | 3E | 4E | +* `-------------------------------------------------------------------------------' +*/ +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, k1G, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2F, k2G, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3F, k3G, \ + k41, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4F, k4G, \ + k51, k52, k53, k57, k5B, k5C, k5D, k5E, k3E, k4E \ +) { \ + {k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, KC_NO, k1F, k1G}, \ + {k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, KC_NO, k2F, k2G}, \ + {k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, KC_NO, k3E, k3F, k3G}, \ + {k41, KC_NO, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G}, \ + {k51, k52, k53, KC_NO, KC_NO, KC_NO, k57, KC_NO, KC_NO, KC_NO, k5B, k5C, k5D, k5E, KC_NO, KC_NO}, \ +} + +#endif //SMK65_H |