diff options
Diffstat (limited to 'keyboards/ktec')
51 files changed, 4506 insertions, 0 deletions
diff --git a/keyboards/ktec/daisy/config.h b/keyboards/ktec/daisy/config.h new file mode 100644 index 0000000000..bf5210c0dc --- /dev/null +++ b/keyboards/ktec/daisy/config.h @@ -0,0 +1,202 @@ +/* +Copyright 2020 + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4B50 +#define PRODUCT_ID 0xD7DC +#define DEVICE_VER 0x0501 +#define MANUFACTURER KTEC +#define PRODUCT Daisy + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 11 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D2, D3, D5, B7 } +#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +#define LED_CAPS_LOCK_PIN C6 +#define LED_PIN_ON_STATE 0 + +#define BACKLIGHT_PIN D0 +// #define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 6 + +#define RGB_DI_PIN C7 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 8 +# define RGBLIGHT_HUE_STEP 12 +# define RGBLIGHT_SAT_STEP 25 +# define RGBLIGHT_VAL_STEP 12 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +# define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/ktec/daisy/daisy.c b/keyboards/ktec/daisy/daisy.c new file mode 100644 index 0000000000..98b7ac84b3 --- /dev/null +++ b/keyboards/ktec/daisy/daisy.c @@ -0,0 +1,17 @@ +/* Copyright 2020 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "daisy.h" diff --git a/keyboards/ktec/daisy/daisy.h b/keyboards/ktec/daisy/daisy.h new file mode 100644 index 0000000000..b78c604649 --- /dev/null +++ b/keyboards/ktec/daisy/daisy.h @@ -0,0 +1,51 @@ +/* Copyright 2020 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K3A, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, \ + K30, K31, K32, K34, K35, K37, K38, K39 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A }, \ + { K30, K31, K32, KC_NO, K34, K35, KC_NO, K37, K38, K39, K3A } \ +} + +#define LAYOUT_625_space( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K3A, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, \ + K30, K31, K32, K35, K38, K39 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A }, \ + { K30, K31, K32, KC_NO, KC_NO, K35, KC_NO, KC_NO, K38, K39, K3A } \ +} diff --git a/keyboards/ktec/daisy/info.json b/keyboards/ktec/daisy/info.json new file mode 100644 index 0000000000..fcc7cd9faf --- /dev/null +++ b/keyboards/ktec/daisy/info.json @@ -0,0 +1,107 @@ +{ + "keyboard_name": "Daisy", + "url": "", + "maintainer": "qmk", + "width": 12, + "height": 4, + "layouts": { + "LAYOUT": { + "key_count": 42, + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + + {"x": 0, "y": 1, "w": 1.25}, + {"x": 1.25, "y": 1}, + {"x": 2.25, "y": 1}, + {"x": 3.25, "y": 1}, + {"x": 4.25, "y": 1}, + {"x": 5.25, "y": 1}, + {"x": 6.25, "y": 1}, + {"x": 7.25, "y": 1}, + {"x": 8.25, "y": 1}, + {"x": 9.25, "y": 1}, + {"x": 10.25, "y": 1, "w": 1.75}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2, "w": 1.25}, + + {"x": 0, "y": 3, "w": 1.25}, + {"x": 1.25, "y": 3}, + {"x": 2.25, "y": 3, "w": 1.25}, + {"x": 3.5, "y": 3, "w": 2.25}, + {"x": 5.75, "y": 3, "w": 2.75}, + {"x": 8.5, "y": 3, "w": 1.25}, + {"x": 9.75, "y": 3}, + {"x": 10.75, "y": 3, "w": 1.25} + ] + }, + "LAYOUT_625_space": { + "key_count": 40, + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + + {"x": 0, "y": 1, "w": 1.25}, + {"x": 1.25, "y": 1}, + {"x": 2.25, "y": 1}, + {"x": 3.25, "y": 1}, + {"x": 4.25, "y": 1}, + {"x": 5.25, "y": 1}, + {"x": 6.25, "y": 1}, + {"x": 7.25, "y": 1}, + {"x": 8.25, "y": 1}, + {"x": 9.25, "y": 1}, + {"x": 10.25, "y": 1, "w": 1.75}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2, "w": 1.25}, + + {"x": 0, "y": 3, "w": 1.25}, + {"x": 1.25, "y": 3}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3, "w": 6.25}, + {"x": 9.5, "y": 3, "w": 1.25}, + {"x": 10.75, "y": 3, "w": 1.25} + ] + } + } +} diff --git a/keyboards/ktec/daisy/keymaps/default/keymap.c b/keyboards/ktec/daisy/keymaps/default/keymap.c new file mode 100644 index 0000000000..10f5710417 --- /dev/null +++ b/keyboards/ktec/daisy/keymaps/default/keymap.c @@ -0,0 +1,83 @@ +/* Copyright 2020 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BL, + _LW, + _RS +}; + +#define LOWER MO(_LW) +#define RAISE MO(_RS) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base Layer + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │Esc│ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ \ │ + * ├───┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴───┤ + * │Tab │ A │ S │ D │ F │ G │ H │ J │ K │ L │ Enter│ + * ├────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬────┤ + * │Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ + * ├────┬─┴─┬─┴──┬┴───┴───┼───┴───┴──┬┴───┼───┼────┤ + * │Ctrl│GUI│Alt │ │ Backspace│Lowr│Rse│ Alt│ + * └────┴───┴────┴────────┴──────────┴────┴───┴────┘ + */ + [_BL] = LAYOUT( + KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_BSPC, LOWER, RAISE, KC_RALT + ), + + /* Function Layer 1 (Lower) + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ + * └───┴┬──┴┬──┴┬──┴───┴───┴┬──┴┬──┴┬──┴┬──┴┬──┴───┘ + * │ │ = │ ▴ │ │ │ │ [ │ ] │ ; │ ' │ │ + * ├────└─┬─┴─┬─┴─┬───┐─┴─┬─└───┴───┴───┴───┘─┬────┤ + * │ │ ◂ │ ▾ │ ▸ │ │ │ │ │ │ │ │ + * ├────┬─└───┴───┴───┘───┌──────────┐┴───┼───┼────┤ + * │ │ │ │ │ Delete │ │ │ │ + * └────┴───┴────┴────────└──────────┘────┴───┴────┘ + */ + [_LW] = LAYOUT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + _______, KC_EQL, KC_UP, _______, _______, _______, KC_LBRC, KC_RBRC, KC_SCLN, KC_QUOT, _______, + _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, KC_DEL, _______, _______, _______ + ), + + /* Function Layer 2 (Raise) + * ┌───┬───┬───┬───┬───┬───┬───┐───┌───┬───┐───┬───┐ + * │Rst│F1 │F2 │F3 │F4 │F5 │F6 │ │Hom│PgU│ │ │ + * └───┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐──└┬──┴┬──┴┐──┴───┤ + * │ │F7 │F8 │F9 │F10│F11│F12│ │ ; │ ' │ │ + * ├────└─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴───┴───┴───┴─┐────┤ + * │ │RGB│Mod│HuD│HuI│VaD│VaI│SaD│SaI│BLS│ │ + * ├────┬─└───┴───┴───┴───┴───┴───┴───┴───┴───┘────┤ + * │ │ │ │ │ │ │ │ │ + * └────┴───┴────┴────────┴──────────┴────┴───┴────┘ + */ + [_RS] = LAYOUT( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, KC_HOME, KC_PGUP, _______, _______, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_END, KC_PGDN, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_VAD, RGB_VAI, RGB_SAD, RGB_SAI, BL_STEP, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/ktec/daisy/keymaps/default/readme.md b/keyboards/ktec/daisy/keymaps/default/readme.md new file mode 100644 index 0000000000..b8c7d17f28 --- /dev/null +++ b/keyboards/ktec/daisy/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for Daisy diff --git a/keyboards/ktec/daisy/keymaps/via/keymap.c b/keyboards/ktec/daisy/keymaps/via/keymap.c new file mode 100644 index 0000000000..102657116c --- /dev/null +++ b/keyboards/ktec/daisy/keymaps/via/keymap.c @@ -0,0 +1,102 @@ +/* Copyright 2020 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BL, + _LW, + _RS, + _EM +}; + +#define LOWER MO(_LW) +#define RAISE MO(_RS) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base Layer + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │Esc│ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ \ │ + * ├───┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴───┤ + * │Tab │ A │ S │ D │ F │ G │ H │ J │ K │ L │ Enter│ + * ├────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬────┤ + * │Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ + * ├────┬─┴─┬─┴──┬┴───┴───┼───┴───┴──┬┴───┼───┼────┤ + * │Ctrl│GUI│Alt │ │ Backspace│Lowr│Rse│ Alt│ + * └────┴───┴────┴────────┴──────────┴────┴───┴────┘ + */ + [_BL] = LAYOUT( + KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_BSPC, LOWER, RAISE, KC_RALT + ), + + /* Function Layer 1 (Lower) + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ + * └───┴┬──┴┬──┴┬──┴───┴───┴┬──┴┬──┴┬──┴┬──┴┬──┴───┘ + * │ │ = │ ▴ │ │ │ │ [ │ ] │ ; │ ' │ │ + * ├────└─┬─┴─┬─┴─┬───┐─┴─┬─└───┴───┴───┴───┘─┬────┤ + * │ │ ◂ │ ▾ │ ▸ │ │ │ │ │ │ │ │ + * ├────┬─└───┴───┴───┘───┌──────────┐┴───┼───┼────┤ + * │ │ │ │ │ Delete │ │ │ │ + * └────┴───┴────┴────────└──────────┘────┴───┴────┘ + */ + [_LW] = LAYOUT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + _______, KC_EQL, KC_UP, _______, _______, _______, KC_LBRC, KC_RBRC, KC_SCLN, KC_QUOT, _______, + _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, KC_DEL, _______, _______, _______ + ), + + /* Function Layer 2 (Raise) + * ┌───┬───┬───┬───┬───┬───┬───┐───┌───┬───┐───┬───┐ + * │Rst│F1 │F2 │F3 │F4 │F5 │F6 │ │Hom│PgU│ │ │ + * └───┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐──└┬──┴┬──┴┐──┴───┤ + * │ │F7 │F8 │F9 │F10│F11│F12│ │ ; │ ' │ │ + * ├────└─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴───┴───┴───┴─┐────┤ + * │ │RGB│Mod│HuD│HuI│VaD│VaI│SaD│SaI│BLS│ │ + * ├────┬─└───┴───┴───┴───┴───┴───┴───┴───┴───┘────┤ + * │ │ │ │ │ │ │ │ │ + * └────┴───┴────┴────────┴──────────┴────┴───┴────┘ + */ + [_RS] = LAYOUT( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, KC_HOME, KC_PGUP, _______, _______, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_END, KC_PGDN, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_VAD, RGB_VAI, RGB_SAD, RGB_SAI, BL_STEP, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + + /* Empty 4th layer for VIA + * ┌───┬───┬───┬───┬───┬───┬───┐───┌───┬───┐───┬───┐ + * | | | | | | | | | | | | | + * └───┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐──└┬──┴┬──┴┐──┴───┤ + * │ │ │ │ │ │ │ │ │ │ │ │ + * ├────└─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴───┴───┴───┴─┐────┤ + * │ │ │ │ │ │ │ │ │ │ │ │ + * ├────┬─└───┴───┴───┴───┴───┴───┴───┴───┴───┘────┤ + * │ │ │ │ │ │ │ │ │ + * └────┴───┴────┴────────┴──────────┴────┴───┴────┘ + */ + [_EM] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/ktec/daisy/keymaps/via/readme.md b/keyboards/ktec/daisy/keymaps/via/readme.md new file mode 100644 index 0000000000..9345124a3c --- /dev/null +++ b/keyboards/ktec/daisy/keymaps/via/readme.md @@ -0,0 +1 @@ +# VIA keymap for Daisy diff --git a/keyboards/ktec/daisy/keymaps/via/rules.mk b/keyboards/ktec/daisy/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/ktec/daisy/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/ktec/daisy/readme.md b/keyboards/ktec/daisy/readme.md new file mode 100644 index 0000000000..a8a93bf791 --- /dev/null +++ b/keyboards/ktec/daisy/readme.md @@ -0,0 +1,15 @@ +# Daisy + + + +A 40% keyboard kit sold by KPrepublic. + +* Keyboard Maintainer: [westfoxtrot](https://github.com/westfoxtrot) +* Hardware Supported: Daisy PCB Rev.1, Daisy PCB Rev.2 +* Hardware Availability: [KPrepublic](https://kprepublic.com/products/daisy-40-custom-keyboard-pcb) + +Make example for this keyboard (after setting up your build environment): + + make daisy:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/ktec/daisy/rules.mk b/keyboards/ktec/daisy/rules.mk new file mode 100644 index 0000000000..487c919150 --- /dev/null +++ b/keyboards/ktec/daisy/rules.mk @@ -0,0 +1,29 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/ktec/ergodone/config.h b/keyboards/ktec/ergodone/config.h new file mode 100644 index 0000000000..39e0ae8c75 --- /dev/null +++ b/keyboards/ktec/ergodone/config.h @@ -0,0 +1,81 @@ +#ifndef ERGODOX_ERGODONE_CONFIG_H +#define ERGODOX_ERGODONE_CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x1209 +#define PRODUCT_ID 0x2328 +// The official ErgoDone VID and PID are documented at http://pid.codes/1209/2328/. +#define DEVICE_VER 0x0001 +#define MANUFACTURER K.T.E.C. +#define PRODUCT ErgoDone + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 14 + +#define MOUSEKEY_INTERVAL 20 +#define MOUSEKEY_DELAY 0 +#define MOUSEKEY_TIME_TO_MAX 60 +#define MOUSEKEY_MAX_SPEED 7 +#define MOUSEKEY_WHEEL_DELAY 0 + +#define TAPPING_TOGGLE 1 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +#define TAPPING_TERM 200 +#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.) + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \ + get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \ +) + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +#define LED_BRIGHTNESS_LO 15 +#define LED_BRIGHTNESS_HI 255 + +/* fix space cadet rollover issue */ +#define DISABLE_SPACE_CADET_ROLLOVER + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +#define USB_MAX_POWER_CONSUMPTION 500 + +/* NKRO */ +#ifndef FORCE_NKRO + #define FORCE_NKRO // Depends on NKRO_ENABLE. +#endif + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION +//#define DEBUG_MATRIX_SCAN_RATE + +#endif diff --git a/keyboards/ktec/ergodone/ergodone.c b/keyboards/ktec/ergodone/ergodone.c new file mode 100644 index 0000000000..e0579408e5 --- /dev/null +++ b/keyboards/ktec/ergodone/ergodone.c @@ -0,0 +1,54 @@ +#include "ergodone.h" + +extern inline void ergodox_board_led_on(void); +extern inline void ergodox_right_led_1_on(void); +extern inline void ergodox_right_led_2_on(void); +extern inline void ergodox_right_led_3_on(void); +extern inline void ergodox_right_led_on(uint8_t led); + +extern inline void ergodox_board_led_off(void); +extern inline void ergodox_right_led_1_off(void); +extern inline void ergodox_right_led_2_off(void); +extern inline void ergodox_right_led_3_off(void); +extern inline void ergodox_right_led_off(uint8_t led); + +extern inline void ergodox_led_all_off(void); + +void ergodox_led_init(void); +void ergodox_blink_all_leds(void); + +void matrix_init_kb(void) { + ergodox_led_init(); + ergodox_blink_all_leds(); + matrix_init_user(); +} + +void ergodox_led_init(void) + { + DDRB |= (1<<PB5 | 1<<PB6 | 1<<PB3); + PORTB &= ~(1<<PB5 | 1<<PB6 | 1<<PB3); + DDRB |= (1<<PB0); + PORTB |= (1<<PB0); + DDRD |= (1<<PB5); + PORTD |= (1<<PB5); +} + +void ergodox_blink_all_leds(void) +{ + ergodox_led_all_off(); + ergodox_led_all_set(LED_BRIGHTNESS_HI); + ergodox_right_led_1_on(); + _delay_ms(50); + ergodox_right_led_2_on(); + _delay_ms(50); + ergodox_right_led_3_on(); + _delay_ms(50); + ergodox_right_led_1_off(); + _delay_ms(50); + ergodox_right_led_2_off(); + _delay_ms(50); + ergodox_right_led_3_off(); + //ergodox_led_all_on(); + //_delay_ms(333); + ergodox_led_all_off(); +} diff --git a/keyboards/ktec/ergodone/ergodone.h b/keyboards/ktec/ergodone/ergodone.h new file mode 100644 index 0000000000..f88280fa2a --- /dev/null +++ b/keyboards/ktec/ergodone/ergodone.h @@ -0,0 +1,182 @@ +#ifndef ERGODOX_ERGODONE_H +#define ERGODOX_ERGODONE_H + +#include "quantum.h" +#include <stdint.h> +#include <stdbool.h> + +#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) +#define CPU_16MHz 0x00 + +void init_ergodox(void); + +inline void ergodox_right_led_1_off(void) { DDRB &= ~(1<<PB5); PORTB &= ~(1<<PB5); } +inline void ergodox_right_led_1_on(void) { DDRB |= (1<<PB5); PORTB |= (1<<PB5); } +inline void ergodox_right_led_2_off(void) { DDRB &= ~(1<<PB6); PORTB &= ~(1<<PB6); } +inline void ergodox_right_led_2_on(void) { DDRB |= (1<<PB6); PORTB |= (1<<PB6); } +inline void ergodox_right_led_3_off(void) { DDRB &= ~(1<<PB3); PORTB &= ~(1<<PB3); } +inline void ergodox_right_led_3_on(void) { DDRB |= (1<<PB3); PORTB |= (1<<PB3); } +inline void ergodox_right_led_on(uint8_t l) { + switch (l) { + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + case 3: + ergodox_right_led_3_on(); + break; + default: + break; + } +} + +inline void ergodox_right_led_off(uint8_t l) { + switch (l) { + case 1: + ergodox_right_led_1_off(); + break; + case 2: + ergodox_right_led_2_off(); + break; + case 3: + ergodox_right_led_3_off(); + break; + default: + break; + } +} +inline void ergodox_board_led_off(void) { DDRB &= ~(1<<PB0); PORTB |= (1<<PB0); } +inline void ergodox_board_led_on(void) { DDRB |= (1<<PB0); PORTB &= ~(1<<PB0); } +inline void ergodox_led_all_on(void) { + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + ergodox_right_led_3_on(); + ergodox_board_led_on(); +} +inline void ergodox_led_all_off(void) { + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + ergodox_board_led_off(); +} +inline void ergodox_right_led_1_set(uint8_t n) {} +inline void ergodox_right_led_2_set(uint8_t n) {} +inline void ergodox_right_led_3_set(uint8_t n) {} +inline void ergodox_right_led_set(uint8_t l, uint8_t n) {} +inline void ergodox_led_all_set(uint8_t n) {} + +/* + * LEFT HAND: LINES 76-83 + * RIGHT HAND: LINES 85-92 + */ +#define LAYOUT_ergodox( \ + \ + k00,k01,k02,k03,k04,k05,k06, \ + k10,k11,k12,k13,k14,k15,k16, \ + k20,k21,k22,k23,k24,k25, \ + k30,k31,k32,k33,k34,k35,k36, \ + k40,k41,k42,k43,k44, \ + k55,k56, \ + k54, \ + k53,k52,k51, \ + \ + k07,k08,k09,k0A,k0B,k0C,k0D, \ + k17,k18,k19,k1A,k1B,k1C,k1D, \ + k28,k29,k2A,k2B,k2C,k2D, \ + k37,k38,k39,k3A,k3B,k3C,k3D, \ + k49,k4A,k4B,k4C,k4D, \ + k57,k58, \ + k59, \ + k5C,k5B,k5A ) \ + \ + /* matrix positions */ \ + { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D }, \ + { k20, k21, k22, k23, k24, k25, KC_NO, KC_NO, k28, k29, k2A, k2B, k2C, k2D }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D }, \ + { k40, k41, k42, k43, k44, KC_NO, KC_NO, KC_NO, KC_NO, k49, k4A, k4B, k4C, k4D }, \ + { KC_NO, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5A, k5B, k5C, KC_NO } \ + } + +/* + * LEFT HAND: LINES 110-117 + * RIGHT HAND: LINES 119-126 + */ +#define LAYOUT_ergodox_80( \ + \ + k00,k01,k02,k03,k04,k05,k06, \ + k10,k11,k12,k13,k14,k15,k16, \ + k20,k21,k22,k23,k24,k25, \ + k30,k31,k32,k33,k34,k35,k36, \ + k40,k41,k42,k43,k44, \ + k55,k56, \ + k45,k46,k54, \ + k53,k52,k51, \ + \ + k07,k08,k09,k0A,k0B,k0C,k0D, \ + k17,k18,k19,k1A,k1B,k1C,k1D, \ + k28,k29,k2A,k2B,k2C,k2D, \ + k37,k38,k39,k3A,k3B,k3C,k3D, \ + k49,k4A,k4B,k4C,k4D, \ + k57,k58, \ + k59,k47,k48, \ + k5C,k5B,k5A ) \ + \ + /* matrix positions */ \ + { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D }, \ + { k20, k21, k22, k23, k24, k25, KC_NO, KC_NO, k28, k29, k2A, k2B, k2C, k2D }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D }, \ + { KC_NO, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5A, k5B, k5C, KC_NO } \ + } + +/* ---------- LEFT HAND ----------- ---------- RIGHT HAND ---------- */ +#define LAYOUT_ergodox_pretty( \ + \ + L00,L01,L02,L03,L04,L05,L06, R00,R01,R02,R03,R04,R05,R06, \ + L10,L11,L12,L13,L14,L15,L16, R10,R11,R12,R13,R14,R15,R16, \ + L20,L21,L22,L23,L24,L25, R21,R22,R23,R24,R25,R26, \ + L30,L31,L32,L33,L34,L35,L36, R30,R31,R32,R33,R34,R35,R36, \ + L40,L41,L42,L43,L44, R42,R43,R44,R45,R46, \ + L55,L56, R50,R51, \ + L54, R52, \ + L53,L52,L51, R55,R54,R53 ) \ + \ + /* matrix positions */ \ + { \ + { L00,L01,L02,L03,L04,L05,L06, R00,R01,R02,R03,R04,R05,R06 }, \ + { L10,L11,L12,L13,L14,L15,L16, R10,R11,R12,R13,R14,R15,R16 }, \ + { L20,L21,L22,L23,L24,L25,KC_NO, KC_NO,R21,R22,R23,R24,R25,R26 }, \ + { L30,L31,L32,L33,L34,L35,L36, R30,R31,R32,R33,R34,R35,R36 }, \ + { L40,L41,L42,L43,L44,KC_NO,KC_NO, KC_NO,KC_NO,R42,R43,R44,R45,R46 }, \ + { KC_NO,L51,L52,L53,L54,L55,L56, R50,R51,R52,R53,R54,R55,KC_NO } \ + } + +/* ---------- LEFT HAND ----------- ---------- RIGHT HAND ---------- */ +#define LAYOUT_ergodox_pretty_80( \ + \ + L00,L01,L02,L03,L04,L05,L06, R00,R01,R02,R03,R04,R05,R06, \ + L10,L11,L12,L13,L14,L15,L16, R10,R11,R12,R13,R14,R15,R16, \ + L20,L21,L22,L23,L24,L25, R21,R22,R23,R24,R25,R26, \ + L30,L31,L32,L33,L34,L35,L36, R30,R31,R32,R33,R34,R35,R36, \ + L40,L41,L42,L43,L44, R42,R43,R44,R45,R46, \ + L55,L56, R50,R51, \ + L45,L46,L54, R52,R40,R41, \ + L53,L52,L51, R55,R54,R53 ) \ + \ + /* matrix positions */ \ + { \ + { L00,L01,L02,L03,L04,L05,L06, R00,R01,R02,R03,R04,R05,R06 }, \ + { L10,L11,L12,L13,L14,L15,L16, R10,R11,R12,R13,R14,R15,R16 }, \ + { L20,L21,L22,L23,L24,L25,KC_NO, KC_NO,R21,R22,R23,R24,R25,R26 }, \ + { L30,L31,L32,L33,L34,L35,L36, R30,R31,R32,R33,R34,R35,R36 }, \ + { L40,L41,L42,L43,L44,L45,L46, R40,R41,R42,R43,R44,R45,R46 }, \ + { KC_NO,L51,L52,L53,L54,L55,L56, R50,R51,R52,R53,R54,R55,KC_NO } \ + } + +#endif diff --git a/keyboards/ktec/ergodone/expander.c b/keyboards/ktec/ergodone/expander.c new file mode 100644 index 0000000000..0c8a2289c5 --- /dev/null +++ b/keyboards/ktec/ergodone/expander.c @@ -0,0 +1,120 @@ +#include <stdbool.h> +#include "action.h" +#include "i2cmaster.h" +#include "expander.h" +#include "debug.h" + +static uint8_t expander_status = 0; +static uint8_t expander_input = 0; + +void expander_config(void); +uint8_t expander_write(uint8_t reg, uint8_t data); +uint8_t expander_read(uint8_t reg, uint8_t *data); + +void expander_init(void) +{ + i2c_init(); + expander_scan(); +} + +void expander_scan(void) +{ + dprintf("expander status: %d ... ", expander_status); + uint8_t ret = i2c_start(EXPANDER_ADDR | I2C_WRITE); + if (ret == 0) { + i2c_stop(); + if (expander_status == 0) { + dprintf("attached\n"); + expander_status = 1; + expander_config(); + clear_keyboard(); + } + } + else { + if (expander_status == 1) { + dprintf("detached\n"); + expander_status = 0; + clear_keyboard(); + } + } + dprintf("%d\n", expander_status); +} + +void expander_read_cols(void) +{ + expander_read(EXPANDER_REG_GPIOA, &expander_input); +} + +uint8_t expander_get_col(uint8_t col) +{ + if (col > 4) { + col++; + } + return expander_input & (1<<col) ? 1 : 0; +} + +matrix_row_t expander_read_row(void) +{ + expander_read_cols(); + + /* make cols */ + matrix_row_t cols = 0; + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + if (expander_get_col(col)) { + cols |= (1UL << (MATRIX_COLS - 1 - col)); + } + } + + return cols; +} + +void expander_unselect_rows(void) +{ + expander_write(EXPANDER_REG_IODIRB, 0xFF); +} + +void expander_select_row(uint8_t row) +{ + expander_write(EXPANDER_REG_IODIRB, ~(1<<(row+1))); +} + +void expander_config(void) +{ + expander_write(EXPANDER_REG_IPOLA, 0xFF); + expander_write(EXPANDER_REG_GPPUA, 0xFF); + expander_write(EXPANDER_REG_IODIRB, 0xFF); +} + +uint8_t expander_write(uint8_t reg, uint8_t data) +{ + if (expander_status == 0) { + return 0; + } + uint8_t ret; + ret = i2c_start(EXPANDER_ADDR | I2C_WRITE); + if (ret) goto stop; + ret = i2c_write(reg); + if (ret) goto stop; + ret = i2c_write(data); + stop: + i2c_stop(); + return ret; +} + +uint8_t expander_read(uint8_t reg, uint8_t *data) +{ + if (expander_status == 0) { + return 0; + } + uint8_t ret; + ret = i2c_start(EXPANDER_ADDR | I2C_WRITE); + if (ret) goto stop; + ret = i2c_write(reg); + if (ret) goto stop; + ret = i2c_rep_start(EXPANDER_ADDR | I2C_READ); + if (ret) goto stop; + *data = i2c_readNak(); + stop: + i2c_stop(); + return ret; +} diff --git a/keyboards/ktec/ergodone/expander.h b/keyboards/ktec/ergodone/expander.h new file mode 100644 index 0000000000..8676fed693 --- /dev/null +++ b/keyboards/ktec/ergodone/expander.h @@ -0,0 +1,48 @@ +#ifndef EXPANDER_H +#define EXPANDER_H + +#include <stdint.h> +#include "matrix.h" + +#define MCP23017 +#define MCP23017_A0 0 +#define MCP23017_A1 0 +#define MCP23017_A2 0 + +#ifdef MCP23017 +#define EXPANDER_ADDR ((0x20|(MCP23017_A0<<0)|(MCP23017_A1<<1)|(MCP23017_A2<<2)) << 1) +enum EXPANDER_REG_BANK0 { + EXPANDER_REG_IODIRA = 0, + EXPANDER_REG_IODIRB, + EXPANDER_REG_IPOLA, + EXPANDER_REG_IPOLB, + EXPANDER_REG_GPINTENA, + EXPANDER_REG_GPINTENB, + EXPANDER_REG_DEFVALA, + EXPANDER_REG_DEFVALB, + EXPANDER_REG_INTCONA, + EXPANDER_REG_INTCONB, + EXPANDER_REG_IOCONA, + EXPANDER_REG_IOCONB, + EXPANDER_REG_GPPUA, + EXPANDER_REG_GPPUB, + EXPANDER_REG_INTFA, + EXPANDER_REG_INTFB, + EXPANDER_REG_INTCAPA, + EXPANDER_REG_INTCAPB, + EXPANDER_REG_GPIOA, + EXPANDER_REG_GPIOB, + EXPANDER_REG_OLATA, + EXPANDER_REG_OLATB +}; +#endif + +void expander_init(void); +void expander_scan(void); +void expander_read_cols(void); +uint8_t expander_get_col(uint8_t col); +matrix_row_t expander_read_row(void); +void expander_unselect_rows(void); +void expander_select_row(uint8_t row); + +#endif diff --git a/keyboards/ktec/ergodone/i2cmaster.h b/keyboards/ktec/ergodone/i2cmaster.h new file mode 100644 index 0000000000..3917b9e6c0 --- /dev/null +++ b/keyboards/ktec/ergodone/i2cmaster.h @@ -0,0 +1,178 @@ +#ifndef _I2CMASTER_H +#define _I2CMASTER_H 1 +/************************************************************************* +* Title: C include file for the I2C master interface +* (i2cmaster.S or twimaster.c) +* Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury +* File: $Id: i2cmaster.h,v 1.10 2005/03/06 22:39:57 Peter Exp $ +* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3 +* Target: any AVR device +* Usage: see Doxygen manual +**************************************************************************/ + +#ifdef DOXYGEN +/** + @defgroup pfleury_ic2master I2C Master library + @code #include <i2cmaster.h> @endcode + + @brief I2C (TWI) Master Software Library + + Basic routines for communicating with I2C slave devices. This single master + implementation is limited to one bus master on the I2C bus. + + This I2c library is implemented as a compact assembler software implementation of the I2C protocol + which runs on any AVR (i2cmaster.S) and as a TWI hardware interface for all AVR with built-in TWI hardware (twimaster.c). + Since the API for these two implementations is exactly the same, an application can be linked either against the + software I2C implementation or the hardware I2C implementation. + + Use 4.7k pull-up resistor on the SDA and SCL pin. + + Adapt the SCL and SDA port and pin definitions and eventually the delay routine in the module + i2cmaster.S to your target when using the software I2C implementation ! + + Adjust the CPU clock frequence F_CPU in twimaster.c or in the Makfile when using the TWI hardware implementaion. + + @note + The module i2cmaster.S is based on the Atmel Application Note AVR300, corrected and adapted + to GNU assembler and AVR-GCC C call interface. + Replaced the incorrect quarter period delays found in AVR300 with + half period delays. + + @author Peter Fleury pfleury@gmx.ch http://jump.to/fleury + + @par API Usage Example + The following code shows typical usage of this library, see example test_i2cmaster.c + + @code + + #include <i2cmaster.h> + + + #define Dev24C02 0xA2 // device address of EEPROM 24C02, see datasheet + + int main(void) + { + unsigned char ret; + + i2c_init(); // initialize I2C library + + // write 0x75 to EEPROM address 5 (Byte Write) + i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode + i2c_write(0x05); // write address = 5 + i2c_write(0x75); // write value 0x75 to EEPROM + i2c_stop(); // set stop conditon = release bus + + + // read previously written value back from EEPROM address 5 + i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode + + i2c_write(0x05); // write address = 5 + i2c_rep_start(Dev24C02+I2C_READ); // set device address and read mode + + ret = i2c_readNak(); // read one byte from EEPROM + i2c_stop(); + + for(;;); + } + @endcode + +*/ +#endif /* DOXYGEN */ + +/**@{*/ + +#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304 +#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !" +#endif + +#include <avr/io.h> + +/** defines the data direction (reading from I2C device) in i2c_start(),i2c_rep_start() */ +#define I2C_READ 1 + +/** defines the data direction (writing to I2C device) in i2c_start(),i2c_rep_start() */ +#define I2C_WRITE 0 + + +/** + @brief initialize the I2C master interace. Need to be called only once + @param void + @return none + */ +extern void i2c_init(void); + + +/** + @brief Terminates the data transfer and releases the I2C bus + @param void + @return none + */ +extern void i2c_stop(void); + + +/** + @brief Issues a start condition and sends address and transfer direction + + @param addr address and transfer direction of I2C device + @retval 0 device accessible + @retval 1 failed to access device + */ +extern unsigned char i2c_start(unsigned char addr); + + +/** + @brief Issues a repeated start condition and sends address and transfer direction + + @param addr address and transfer direction of I2C device + @retval 0 device accessible + @retval 1 failed to access device + */ +extern unsigned char i2c_rep_start(unsigned char addr); + + +/** + @brief Issues a start condition and sends address and transfer direction + + If device is busy, use ack polling to wait until device ready + @param addr address and transfer direction of I2C device + @return none + */ +extern void i2c_start_wait(unsigned char addr); + + +/** + @brief Send one byte to I2C device + @param data byte to be transfered + @retval 0 write successful + @retval 1 write failed + */ +extern unsigned char i2c_write(unsigned char data); + + +/** + @brief read one byte from the I2C device, request more data from device + @return byte read from I2C device + */ +extern unsigned char i2c_readAck(void); + +/** + @brief read one byte from the I2C device, read is followed by a stop condition + @return byte read from I2C device + */ +extern unsigned char i2c_readNak(void); + +/** + @brief read one byte from the I2C device + + Implemented as a macro, which calls either i2c_readAck or i2c_readNak + + @param ack 1 send ack, request more data from device<br> + 0 send nak, read is followed by a stop condition + @return byte read from I2C device + */ +extern unsigned char i2c_read(unsigned char ack); +#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); + + +/**@}*/ +#endif diff --git a/keyboards/ktec/ergodone/info.json b/keyboards/ktec/ergodone/info.json new file mode 100644 index 0000000000..33128758ac --- /dev/null +++ b/keyboards/ktec/ergodone/info.json @@ -0,0 +1,107 @@ +{ + "keyboard_name": "Ergodone", + "maintainer": "Yu He", + "width": 17, + "height": 8, + + "layouts": { + "LAYOUT_ergodox": { + + "layout": [ + {"x":0, "y":0.375, "w":1.5}, {"x":1.5, "y":0.375}, {"x":2.5, "y":0.125}, {"x":3.5, "y":0}, {"x":4.5, "y":0.125}, {"x":5.5, "y":0.25}, {"x":6.5, "y":0.25}, + {"x":0, "y":1.375, "w":1.5}, {"x":1.5, "y":1.375}, {"x":2.5, "y":1.125}, {"x":3.5, "y":1}, {"x":4.5, "y":1.125}, {"x":5.5, "y":1.25}, {"x":6.5, "y":1.25, "h":1.5}, + {"x":0, "y":2.375, "w":1.5}, {"x":1.5, "y":2.375}, {"x":2.5, "y":2.125}, {"x":3.5, "y":2}, {"x":4.5, "y":2.125}, {"x":5.5, "y":2.25}, + {"x":0, "y":3.375, "w":1.5}, {"x":1.5, "y":3.375}, {"x":2.5, "y":3.125}, {"x":3.5, "y":3}, {"x":4.5, "y":3.125}, {"x":5.5, "y":3.25}, {"x":6.5, "y":2.75, "h":1.5}, + {"x":0.5, "y":4.375}, {"x":1.5, "y":4.375}, {"x":2.5, "y":4.125}, {"x":3.5, "y":4}, {"x":4.5, "y":4.125}, + + {"x":6, "y":5}, {"x":7, "y":5}, + {"x":7, "y":6}, + {"x":5, "y":6, "h":2}, {"x":6, "y":6, "h":2}, {"x":7, "y":7}, + + + {"x":9.5, "y":0.25}, {"x":10.5, "y":0.25}, {"x":11.5, "y":0.125}, {"x":12.5, "y":0}, {"x":13.5, "y":0.125}, {"x":14.5, "y":0.375}, {"x":15.5, "y":0.375, "w":1.5}, + {"x":9.5, "y":1.25, "h":1.5}, {"x":10.5, "y":1.25}, {"x":11.5, "y":1.125}, {"x":12.5, "y":1}, {"x":13.5, "y":1.125}, {"x":14.5, "y":1.375}, {"x":15.5, "y":1.375, "w":1.5}, + {"x":10.5, "y":2.25}, {"x":11.5, "y":2.125}, {"x":12.5, "y":2}, {"x":13.5, "y":2.125}, {"x":14.5, "y":2.375}, {"x":15.5, "y":2.375, "w":1.5}, + {"x":9.5, "y":2.75, "h":1.5}, {"x":10.5, "y":3.25}, {"x":11.5, "y":3.125}, {"x":12.5, "y":3}, {"x":13.5, "y":3.125}, {"x":14.5, "y":3.375}, {"x":15.5, "y":3.375, "w":1.5}, + {"x":11.5, "y":4.125}, {"x":12.5, "y":4}, {"x":13.5, "y":4.125}, {"x":14.5, "y":4.375}, {"x":15.5, "y":4.375}, + + + {"x":9, "y":5}, {"x":10, "y":5}, + {"x":9, "y":6}, + {"x":9, "y":7}, {"x":10, "y":6, "h":2}, {"x":11, "y":6, "h":2} + ] + }, + "LAYOUT_ergodox_pretty": { + "layout": [ + {"x":0, "y":0.375, "w":1.5}, {"x":1.5, "y":0.375}, {"x":2.5, "y":0.125}, {"x":3.5, "y":0}, {"x":4.5, "y":0.125}, {"x":5.5, "y":0.25}, {"x":6.5, "y":0.25}, + {"x":9.5, "y":0.25}, {"x":10.5, "y":0.25}, {"x":11.5, "y":0.125}, {"x":12.5, "y":0}, {"x":13.5, "y":0.125}, {"x":14.5, "y":0.375}, {"x":15.5, "y":0.375, "w":1.5}, + + {"x":0, "y":1.375, "w":1.5}, {"x":1.5, "y":1.375}, {"x":2.5, "y":1.125}, {"x":3.5, "y":1}, {"x":4.5, "y":1.125}, {"x":5.5, "y":1.25}, {"x":6.5, "y":1.25, "h":1.5}, + {"x":9.5, "y":1.25, "h":1.5}, {"x":10.5, "y":1.25}, {"x":11.5, "y":1.125}, {"x":12.5, "y":1}, {"x":13.5, "y":1.125}, {"x":14.5, "y":1.375}, {"x":15.5, "y":1.375, "w":1.5}, + + {"x":0, "y":2.375, "w":1.5}, {"x":1.5, "y":2.375}, {"x":2.5, "y":2.125}, {"x":3.5, "y":2}, {"x":4.5, "y":2.125}, {"x":5.5, "y":2.25}, + {"x":10.5, "y":2.25}, {"x":11.5, "y":2.125}, {"x":12.5, "y":2}, {"x":13.5, "y":2.125}, {"x":14.5, "y":2.375}, {"x":15.5, "y":2.375, "w":1.5}, + + {"x":0, "y":3.375, "w":1.5}, {"x":1.5, "y":3.375}, {"x":2.5, "y":3.125}, {"x":3.5, "y":3}, {"x":4.5, "y":3.125}, {"x":5.5, "y":3.25}, {"x":6.5, "y":2.75, "h":1.5}, + {"x":9.5, "y":2.75, "h":1.5}, {"x":10.5, "y":3.25}, {"x":11.5, "y":3.125}, {"x":12.5, "y":3}, {"x":13.5, "y":3.125}, {"x":14.5, "y":3.375}, {"x":15.5, "y":3.375, "w":1.5}, + + {"x":0.5, "y":4.375}, {"x":1.5, "y":4.375}, {"x":2.5, "y":4.125}, {"x":3.5, "y":4}, {"x":4.5, "y":4.125}, + {"x":11.5, "y":4.125}, {"x":12.5, "y":4}, {"x":13.5, "y":4.125}, {"x":14.5, "y":4.375}, {"x":15.5, "y":4.375}, + + {"x":6, "y":5}, {"x":7, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, + {"x":7, "y":6}, {"x":9, "y":6}, + {"x":5, "y":6, "h":2}, {"x":6, "y":6, "h":2}, {"x":7, "y":7}, {"x":9, "y":7}, {"x":10, "y":6, "h":2}, {"x":11, "y":6, "h":2} + ] + }, + "LAYOUT_ergodox_80": { + + "layout": [ + {"x":0, "y":0.375, "w":1.5}, {"x":1.5, "y":0.375}, {"x":2.5, "y":0.125}, {"x":3.5, "y":0}, {"x":4.5, "y":0.125}, {"x":5.5, "y":0.25}, {"x":6.5, "y":0.25}, + {"x":0, "y":1.375, "w":1.5}, {"x":1.5, "y":1.375}, {"x":2.5, "y":1.125}, {"x":3.5, "y":1}, {"x":4.5, "y":1.125}, {"x":5.5, "y":1.25}, {"x":6.5, "y":1.25, "h":1.5}, + {"x":0, "y":2.375, "w":1.5}, {"x":1.5, "y":2.375}, {"x":2.5, "y":2.125}, {"x":3.5, "y":2}, {"x":4.5, "y":2.125}, {"x":5.5, "y":2.25}, + {"x":0, "y":3.375, "w":1.5}, {"x":1.5, "y":3.375}, {"x":2.5, "y":3.125}, {"x":3.5, "y":3}, {"x":4.5, "y":3.125}, {"x":5.5, "y":3.25}, {"x":6.5, "y":2.75, "h":1.5}, + {"x":0.5, "y":4.375}, {"x":1.5, "y":4.375}, {"x":2.5, "y":4.125}, {"x":3.5, "y":4}, {"x":4.5, "y":4.125}, + + {"x":6, "y":5}, {"x":7, "y":5}, + + {"x":5, "y":6}, {"x":6, "y":6}, {"x":7, "y":6}, + {"x":5, "y":7}, {"x":6, "y":7}, {"x":7, "y":7}, + + + {"x":9.5, "y":0.25}, {"x":10.5, "y":0.25}, {"x":11.5, "y":0.125}, {"x":12.5, "y":0}, {"x":13.5, "y":0.125}, {"x":14.5, "y":0.375}, {"x":15.5, "y":0.375, "w":1.5}, + {"x":9.5, "y":1.25, "h":1.5}, {"x":10.5, "y":1.25}, {"x":11.5, "y":1.125}, {"x":12.5, "y":1}, {"x":13.5, "y":1.125}, {"x":14.5, "y":1.375}, {"x":15.5, "y":1.375, "w":1.5}, + {"x":10.5, "y":2.25}, {"x":11.5, "y":2.125}, {"x":12.5, "y":2}, {"x":13.5, "y":2.125}, {"x":14.5, "y":2.375}, {"x":15.5, "y":2.375, "w":1.5}, + {"x":9.5, "y":2.75, "h":1.5}, {"x":10.5, "y":3.25}, {"x":11.5, "y":3.125}, {"x":12.5, "y":3}, {"x":13.5, "y":3.125}, {"x":14.5, "y":3.375}, {"x":15.5, "y":3.375, "w":1.5}, + {"x":11.5, "y":4.125}, {"x":12.5, "y":4}, {"x":13.5, "y":4.125}, {"x":14.5, "y":4.375}, {"x":15.5, "y":4.375}, + + + {"x":9, "y":5}, {"x":10, "y":5}, + {"x":9, "y":6}, {"x":10, "y":6}, {"x":11, "y":6}, + {"x":9, "y":7}, {"x":10, "y":7}, {"x":11, "y":7} + ] + }, + "LAYOUT_ergodox_pretty_80": { + + "layout": [ + {"x":0, "y":0.375, "w":1.5}, {"x":1.5, "y":0.375}, {"x":2.5, "y":0.125}, {"x":3.5, "y":0}, {"x":4.5, "y":0.125}, {"x":5.5, "y":0.25}, {"x":6.5, "y":0.25}, + {"x":9.5, "y":0.25}, {"x":10.5, "y":0.25}, {"x":11.5, "y":0.125}, {"x":12.5, "y":0}, {"x":13.5, "y":0.125}, {"x":14.5, "y":0.375}, {"x":15.5, "y":0.375, "w":1.5}, + + {"x":0, "y":1.375, "w":1.5}, {"x":1.5, "y":1.375}, {"x":2.5, "y":1.125}, {"x":3.5, "y":1}, {"x":4.5, "y":1.125}, {"x":5.5, "y":1.25}, {"x":6.5, "y":1.25, "h":1.5}, + {"x":9.5, "y":1.25, "h":1.5}, {"x":10.5, "y":1.25}, {"x":11.5, "y":1.125}, {"x":12.5, "y":1}, {"x":13.5, "y":1.125}, {"x":14.5, "y":1.375}, {"x":15.5, "y":1.375, "w":1.5}, + + {"x":0, "y":2.375, "w":1.5}, {"x":1.5, "y":2.375}, {"x":2.5, "y":2.125}, {"x":3.5, "y":2}, {"x":4.5, "y":2.125}, {"x":5.5, "y":2.25}, + {"x":10.5, "y":2.25}, {"x":11.5, "y":2.125}, {"x":12.5, "y":2}, {"x":13.5, "y":2.125}, {"x":14.5, "y":2.375}, {"x":15.5, "y":2.375, "w":1.5}, + + {"x":0, "y":3.375, "w":1.5}, {"x":1.5, "y":3.375}, {"x":2.5, "y":3.125}, {"x":3.5, "y":3}, {"x":4.5, "y":3.125}, {"x":5.5, "y":3.25}, {"x":6.5, "y":2.75, "h":1.5}, + {"x":9.5, "y":2.75, "h":1.5}, {"x":10.5, "y":3.25}, {"x":11.5, "y":3.125}, {"x":12.5, "y":3}, {"x":13.5, "y":3.125}, {"x":14.5, "y":3.375}, {"x":15.5, "y":3.375, "w":1.5}, + + {"x":0.5, "y":4.375}, {"x":1.5, "y":4.375}, {"x":2.5, "y":4.125}, {"x":3.5, "y":4}, {"x":4.5, "y":4.125}, + {"x":11.5, "y":4.125}, {"x":12.5, "y":4}, {"x":13.5, "y":4.125}, {"x":14.5, "y":4.375}, {"x":15.5, "y":4.375}, + + {"x":6, "y":5}, {"x":7, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, + {"x":5, "y":6}, {"x":6, "y":6}, {"x":7, "y":6}, {"x":9, "y":6}, {"x":10, "y":6}, {"x":11, "y":6}, + {"x":5, "y":7}, {"x":6, "y":7}, {"x":7, "y":7}, {"x":9, "y":7}, {"x":10, "y":7}, {"x":11, "y":7} + ] + } + } +} diff --git a/keyboards/ktec/ergodone/keymaps/art/keymap.c b/keyboards/ktec/ergodone/keymaps/art/keymap.c new file mode 100644 index 0000000000..7fcbd5b615 --- /dev/null +++ b/keyboards/ktec/ergodone/keymaps/art/keymap.c @@ -0,0 +1,446 @@ +#include "art.h" +#include "sendstring_workman_zxcvm.h" + +bool is_win = true; + +enum custom_keycodes { + keyboardSpecificKeyCode = NEW_SAFE_RANGE //not used +}; + +void led_show_current_os(void) { + if (is_win) { + ergodox_right_led_1_on(); + wait_ms(50); + ergodox_right_led_1_off(); + wait_ms(50); + ergodox_right_led_1_on(); + wait_ms(50); + ergodox_right_led_1_off(); + wait_ms(50); + ergodox_right_led_1_on(); + wait_ms(50); + ergodox_right_led_1_off(); + wait_ms(50); + } else { + ergodox_right_led_3_on(); + wait_ms(50); + ergodox_right_led_3_off(); + wait_ms(50); + ergodox_right_led_3_on(); + wait_ms(50); + ergodox_right_led_3_off(); + wait_ms(50); + ergodox_right_led_3_on(); + wait_ms(50); + ergodox_right_led_3_off(); + wait_ms(50); + } +} + +void matrix_init_user(void) { + led_show_current_os(); +} + +void led_set_user(uint8_t usb_led) { + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + ergodox_right_led_2_on(); + } else { + ergodox_right_led_2_off(); + } +} + + + +layer_state_t layer_state_set_user(layer_state_t state) { + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_3_off(); + switch (get_highest_layer(state)) { + case NAV: + case CTRL_NAV: + case SHIFT_NAV: + ergodox_right_led_1_on(); + break; + case FKEYS: + ergodox_right_led_3_on(); + break; + } + return state; +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Base qwerty layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ` ~ | 1 | 2 | 3 | 4 | 5 | ESC | | - _ | 6 | 7 | 8 | 9 | 0 | ] | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | ??? | | = | Y | U | I | O | P | [ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Caps | A | S | D | F | G |------| |------| H | J | K | L | ; | ' | + * |--------+------+------+------+------+------| FKEYS| | FKEYS|------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | | N | M | , | . | / git| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |LCtrl |Media\| Win |Alt | NAV | | Home | End |Workmn| | RCtrl| + * `----------------------------------' `----------------------------------' + * ,-------------. ,---------------. + * | Del | Ins | | Left | Right | + * ,------|------|------| |------+--------+------. + * | | | PgUp | |SFT_NV| | | + * | Space|BSpace|------| |------| NAV |Enter | + * | | | PgDn | |CTR_NV| | | + * `--------------------' `----------------------' + */ +[QWERTY] = LAYOUT_ergodox( + // -----------------------------------------------------left hand----------------------------------------------------- + KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESCAPE, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, XXXXXXX, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, TT(FKEYS), + KC_LCTRL, LT(MEDIA, KC_BSLASH), KC_LWIN, KC_LALT, LT(NAV, KC_RIGHT), + + KC_DEL, KC_INS, + KC_PGUP, + KC_SPC, LT(COMBOS,KC_BSPC), KC_PGDOWN, + + // -----------------------------------------------------right hand----------------------------------------------------- + KC_MINS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_RBRC, + KC_EQL, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + TT(FKEYS), KC_N, KC_M, KC_COMM, KC_DOT, LT(GIT,KC_SLSH), KC_RSFT, + KC_HOME, KC_END, DF(WORKMAN), KC_RALT, KC_RCTRL, + + KC_LEFT, KC_RIGHT, + LT(SHIFT_NAV, KC_UP), + LT(CTRL_NAV, KC_DOWN), MO(NAV), KC_ENT +), + /* Workman + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | Q | D | R | W | B | | | | J | F | U | P | ; | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | A | S | H | T | G |------| |------| Y | N | E | O | I | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | Z | X | C | V | M | | | | K | L | , | . | / | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | |QWERTY| | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,---------------. + * | | | | | | + * ,------|------|------| |------+--------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `----------------------' + */ +[WORKMAN] = LAYOUT_ergodox( + // -----------------------------------------------------left hand----------------------------------------------------- + _______, _______, _______, _______, _______, _______, _______, + _______, KC_Q, KC_D, KC_R, KC_W, KC_B, _______, + _______, KC_A, KC_S, KC_H, KC_T, KC_G, + _______, KC_Z, KC_X, KC_C, KC_V, KC_M, _______, + _______, _______, _______, _______, _______, + + _______, _______, + _______, + _______, _______, _______, + + // -----------------------------------------------------right hand----------------------------------------------------- + _______, _______, _______, _______, _______, _______, _______, + _______, KC_J, KC_F, KC_U, KC_P, KC_SCLN, _______, + KC_Y, KC_N, KC_E, KC_O, KC_I, _______, + _______, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, _______, + _______, _______, DF(QWERTY), _______, _______, + + _______, _______, + _______, + _______, _______, _______ +), + +[FKEYS] = LAYOUT_ergodox( + // -----------------------------------------------------left hand----------------------------------------------------- + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + + _______, _______, + _______, + _______, _______, _______, + // -----------------------------------------------------right hand----------------------------------------------------- + _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + _______, _______, _______, _______, _______, _______, KC_F12, + _______, _______, _______, _______, _______, KC_PSCREEN, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + + _______, _______, + _______, + _______, _______, _______ +), + +[NAV] = LAYOUT_ergodox( + // -----------------------------------------------------left hand----------------------------------------------------- + _______, LALT(KC_F1), LALT(KC_F2), LALT(KC_F3), LALT(KC_F4), LALT(KC_F5), _______, + _______, _______, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, + _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDOWN, + _______, _______, _______, _______, KC_LALT, _______, _______, + _______, _______, _______, _______, _______, + + _______, _______, + _______, + _______, KC_DEL, _______, + // -----------------------------------------------------right hand----------------------------------------------------- + _______, LALT(KC_F6), LALT(KC_F7), LALT(KC_F8), LALT(KC_F9), LALT(KC_F10), LALT(KC_F11), + _______, _______, _______, _______, _______, _______, LALT(KC_F12), + _______, CTR_ALT, KC_RSFT, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + + _______, _______, + _______, + _______, _______, _______ +), + +[CTRL_NAV] = LAYOUT_ergodox( + // -----------------------------------------------------left hand----------------------------------------------------- + _______, _______, _______, _______, _______, _______, _______, + _______, _______, CTL_ALT(KC_HOME), CTL_ALT(KC_UP), CTL_ALT(KC_END), CTL_ALT(KC_PGUP), _______, + _______, _______, CTL_ALT(KC_LEFT), CTL_ALT(KC_DOWN), CTL_ALT(KC_RIGHT),CTL_ALT(KC_PGDOWN), + _______, _______, CTL_ALT(KC_X), CTL_ALT(KC_C), CTL_ALT(KC_V), _______, _______, + _______, _______, _______, _______, _______, + + CTL_ALT(KC_DEL), _______, + _______, + _______, CTL_ALT(KC_BSPC), CTL_ALT(KC_DEL), + // -----------------------------------------------------right hand----------------------------------------------------- + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + CTL_ALT(KC_HOME), CTL_ALT(KC_END), _______, _______, _______, + + CTL_ALT(KC_LEFT), CTL_ALT(KC_RIGHT), + KC_RSFT, + _______, _______, _______ +), + +[SHIFT_NAV] = LAYOUT_ergodox( + // -----------------------------------------------------left hand----------------------------------------------------- + _______, _______, _______, _______, _______, _______, _______, + _______, _______, LSFT(KC_HOME), LSFT(KC_UP), LSFT(KC_END), LSFT(KC_PGUP), _______, + _______, _______, LSFT(KC_LEFT), LSFT(KC_DOWN), LSFT(KC_RIGHT), LSFT(KC_PGDOWN), + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + + _______, _______, + _______, + _______, _______, _______, + + + // -----------------------------------------------------right hand----------------------------------------------------- + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + LSFT(KC_HOME), LSFT(KC_END), _______, _______, _______, + + LSFT(KC_LEFT), LSFT(KC_RIGHT), + _______, + CTR_ALT, _______, _______ +), + +[COMBOS] = LAYOUT_ergodox( + // -----------------------------------------------------left hand----------------------------------------------------- + TILD_BLOCK, PRESCRIPTION, _______, _______, FOURS, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, ADMINS, SARCASM, _______, CTRL_CTV, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + + _______, _______, + _______, + _______, _______, _______, + + // -----------------------------------------------------right hand----------------------------------------------------- + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, CTRL_LCTV, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + + _______, _______, + _______, + _______, _______, _______ +), + +// [STRINGS] = LAYOUT_ergodox( +// // -----------------------------------------------------left hand----------------------------------------------------- +// _______, _______, _______, _______, _______, _______, _______, +// _______, _______, _______, _______, _______, _______, _______, +// _______, _______, _______, _______, _______, _______, +// _______, _______, _______, _______, _______, _______, _______, +// _______, _______, _______, _______, _______, + +// _______, _______, +// _______, +// _______, _______, _______, + +// // -----------------------------------------------------right hand----------------------------------------------------- +// _______, _______, _______, _______, _______, _______, _______, +// _______, _______, _______, _______, _______, _______, _______, +// _______, _______, _______, _______, _______, _______, +// _______, _______, _______, _______, _______, _______, _______, +// _______, _______, _______, _______, _______, + +// _______, _______, +// _______, +// _______, _______, _______ +// ), + +[MEDIA] = LAYOUT_ergodox( + // -----------------------------------------------------left hand----------------------------------------------------- + _______, _______, _______, _______, _______, _______, _______, + _______, _______, KC_MPRV, KC_VOLU, KC_MNXT, _______, _______, + _______, _______, _______, KC_VOLD, _______, _______, + _______, _______, _______, KC_MUTE, KC_MPLY, _______, _______, + _______, _______, _______, _______, _______, + + _______, _______, + _______, + _______, _______, _______, + + // -----------------------------------------------------right hand----------------------------------------------------- + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, TOG_OS, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + + _______, _______, + _______, + _______, _______, _______ +), + +[GIT] = LAYOUT_ergodox( + // -----------------------------------------------------left hand----------------------------------------------------- + _______, _______, _______, _______, _______, _______, _______, + _______, _______, G_DIFF, G_RST, _______, G_BRCH, _______, + _______, G_ADD, G_S, _______, _______, _______, + _______, _______, _______, G_C, _______, G_MERG, _______, + _______, _______, _______, _______, _______, + + _______, _______, + _______, + _______, _______, _______, + + // -----------------------------------------------------right hand----------------------------------------------------- + _______, _______, _______, _______, _______, _______, _______, + _______, _______, G_FTCH, _______, G_P, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, G_LOG, _______, G_DEV, _______, _______, + _______, _______, _______, _______, _______, + + _______, _______, + _______, + _______, _______, _______ +), + +[GIT_C] = LAYOUT_ergodox( + // -----------------------------------------------------left hand----------------------------------------------------- + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, G_CHEC, XXXXXXX, XXXXXXX, + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + + XXXXXXX, XXXXXXX, + XXXXXXX, + XXXXXXX, KC_BSPC, XXXXXXX, + + // -----------------------------------------------------right hand----------------------------------------------------- + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, G_COMM, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + + XXXXXXX, XXXXXXX, + XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX +), + +[GIT_S] = LAYOUT_ergodox( + // -----------------------------------------------------left hand----------------------------------------------------- + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, G_STSH, G_SHOW, G_STAT, XXXXXXX, + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + + XXXXXXX, XXXXXXX, + XXXXXXX, + XXXXXXX, KC_BSPC, XXXXXXX, + + // -----------------------------------------------------right hand----------------------------------------------------- + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, G_COMM, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + + XXXXXXX, XXXXXXX, + XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX +), + + +/* Numpad + * + * ,--------------------------------------------------. + * | | | | | | / | | + * |------+------+------+------+------+------+--------| + * | | | 7 | 8 | 9 | * | | + * | |------+------+------+------+------+--------| + * |------| | 4 | 5 | 6 | - | Enter | + * | |------+------+------+------+------+--------| + * | | | 1 | 2 | 3 | + | Enter | + * `-------------+------+------+------+------+--------' + * | | 0 | . | Calc | Calc | + * `----------------------------------' + */ + +// [] = LAYOUT_ergodox( +// // -----------------------------------------------------left hand----------------------------------------------------- +// _______, _______, _______, _______, _______, _______, _______, +// _______, _______, _______, _______, _______, _______, _______, +// _______, _______, _______, _______, _______, _______, +// _______, _______, _______, _______, _______, _______, _______, +// _______, _______, _______, _______, _______, + +// _______, _______, +// _______, +// _______, _______, _______, + +// // -----------------------------------------------------right hand----------------------------------------------------- +// _______, _______, _______, _______, _______, _______, _______, +// _______, _______, _______, _______, _______, _______, _______, +// _______, _______, _______, _______, _______, _______, +// _______, _______, _______, _______, _______, _______, _______, +// _______, _______, _______, _______, _______, + +// _______, _______, +// _______, +// _______, _______, _______ +// ), + +}; + +bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + + } + return true; +} diff --git a/keyboards/ktec/ergodone/keymaps/default/keymap.c b/keyboards/ktec/ergodone/keymaps/default/keymap.c new file mode 100644 index 0000000000..2fc5344011 --- /dev/null +++ b/keyboards/ktec/ergodone/keymaps/default/keymap.c @@ -0,0 +1,199 @@ +#include QMK_KEYBOARD_H +#include "version.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +enum custom_keycodes { + PLACEHOLDER = SAFE_RANGE, // can always be here + EPRM, + VRSN, + RGB_SLD +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = LAYOUT_ergodox( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, TT(SYMB), + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,---------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |---------+------+------+------+------+------+------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |---------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |---------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `---------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | EPRM | | | | | | | . | 0 | = | | + * `-----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * |Animat| | |Toggle|Solid | + * ,------|------|------| |------+------+------. + * |Bright|Bright| | | |Hue- |Hue+ | + * |ness- |ness+ |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = LAYOUT_ergodox( + // left hand + VRSN, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + EPRM,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + RGB_MOD,KC_TRNS, + KC_TRNS, + RGB_VAD,RGB_VAI,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + RGB_TOG, RGB_SLD, + KC_TRNS, + KC_TRNS, RGB_HUD, RGB_HUI +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = LAYOUT_ergodox( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + // dynamically generate these. + case EPRM: + if (record->event.pressed) { + eeconfig_init(); + } + return false; + break; + case VRSN: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + return false; + break; + case RGB_SLD: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + rgblight_mode(1); + #endif + } + return false; + break; + } + return true; +} + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ktec/ergodone/keymaps/default/readme.md b/keyboards/ktec/ergodone/keymaps/default/readme.md new file mode 100644 index 0000000000..1150a4f709 --- /dev/null +++ b/keyboards/ktec/ergodone/keymaps/default/readme.md @@ -0,0 +1,15 @@ +# ErgoDox EZ Default Configuration + +## Changelog + +* Dec 2016: + * Added LED keys + * Refreshed layout graphic, comes from http://configure.ergodox-ez.com now. +* Sep 22, 2016: + * Created a new key in layer 1 (bottom-corner key) that resets the EEPROM. +* Feb 2, 2016 (V1.1): + * Made the right-hand quote key double as Cmd/Win on hold. So you get ' when you tap it, " when you tap it with Shift, and Cmd or Win when you hold it. You can then use it as a modifier, or just press and hold it for a moment (and then let go) to send a single Cmd or Win keystroke (handy for opening the Start menu on Windows). + +This is what we ship with out of the factory. :) The image says it all: + +
\ No newline at end of file diff --git a/keyboards/ktec/ergodone/keymaps/eozaki/keymap.c b/keyboards/ktec/ergodone/keymaps/eozaki/keymap.c new file mode 100644 index 0000000000..09854ee89c --- /dev/null +++ b/keyboards/ktec/ergodone/keymaps/eozaki/keymap.c @@ -0,0 +1,201 @@ +#include QMK_KEYBOARD_H +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +enum custom_keycodes { + PLACEHOLDER = SAFE_RANGE, // can always be here + EPRM, + VRSN, + RGB_SLD +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | ~ | | ' | 6 | 7 | 8 | 9 | 0 | = | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | ~ | | " | Y | U | I | O | P | - | + * |--------+------+------+------+------+------| ` | | |------+------+------+------+------+--------| + * | Ctrl | A | S | D | F | G |------| |------| H | J | K | L | ; | \ | + * |--------+------+------+------+------+------| { | | } |------+------+------+------+------+--------| + * | LAlt | Z | X | C | V | B | [ | | ] | N | M | , | . | / | LShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LT-1 | F4 | F5 | F6 | F11 | | Left | Down | Up | Right| RAlt | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | L1 | Prev | | Vol+ | L2 | + * ,------|------|------| |------+--------+------. + * | | | Play | | Vol- | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | Next | | Mute | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = LAYOUT_ergodox( // layer 0 : default + // left hand + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, LSFT(KC_GRV), + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_GRV, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LALT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, + LT(SYMB, KC_F2), KC_F4, KC_F5, KC_F6, KC_F11, + TG(SYMB), KC_MPRV, + KC_MPLY, + KC_SPC,KC_BSPC,KC_MNXT, + // right hand + KC_QUOT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, + LSFT(KC_QUOT), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),KC_BSLS, + KC_RBRC, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_LSFT, + KC_LEFT,KC_DOWN,KC_UP, KC_RGHT,KC_RALT, + KC_VOLU, TG(MDIA), + KC_VOLD, + KC_MUTE,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,---------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |---------+------+------+------+------+------+------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |---------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |---------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `---------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | EPRM | | | | | | | . | 0 | = | | + * `-----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * |Animat| | |Toggle|Solid | + * ,------|------|------| |------+------+------. + * |Bright|Bright| | | |Hue- |Hue+ | + * |ness- |ness+ |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = LAYOUT_ergodox( + // left hand + VRSN, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + EPRM,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + RGB_MOD,KC_TRNS, + KC_TRNS, + RGB_VAD,RGB_VAI,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + RGB_TOG, RGB_SLD, + KC_TRNS, + KC_TRNS, RGB_HUD, RGB_HUI +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = LAYOUT_ergodox( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + // dynamically generate these. + case EPRM: + if (record->event.pressed) { + eeconfig_init(); + } + return false; + break; + case VRSN: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + return false; + break; + case RGB_SLD: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + rgblight_mode(1); + #endif + } + return false; + break; + } + return true; +} + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ktec/ergodone/keymaps/eozaki/readme.md b/keyboards/ktec/ergodone/keymaps/eozaki/readme.md new file mode 100644 index 0000000000..bfde2b2c8e --- /dev/null +++ b/keyboards/ktec/ergodone/keymaps/eozaki/readme.md @@ -0,0 +1,13 @@ +# ErgoDox EZ Based Configuration + +## Changelog + +* Aug 2018: + * New custom L0 layout. +* Dec 2016: + * Added LED keys + * Refreshed layout graphic, comes from http://configure.ergodox-ez.com now. +* Sep 22, 2016: + * Created a new key in layer 1 (bottom-corner key) that resets the EEPROM. +* Feb 2, 2016 (V1.1): + * Made the right-hand quote key double as Cmd/Win on hold. So you get ' when you tap it, " when you tap it with Shift, and Cmd or Win when you hold it. You can then use it as a modifier, or just press and hold it for a moment (and then let go) to send a single Cmd or Win keystroke (handy for opening the Start menu on Windows). diff --git a/keyboards/ktec/ergodone/keymaps/erovia/config.h b/keyboards/ktec/ergodone/keymaps/erovia/config.h new file mode 100644 index 0000000000..60c6ad4a12 --- /dev/null +++ b/keyboards/ktec/ergodone/keymaps/erovia/config.h @@ -0,0 +1,3 @@ +#pragma once + +#define DISABLE_SPACE_CADET_ROLLOVER diff --git a/keyboards/ktec/ergodone/keymaps/erovia/keymap.c b/keyboards/ktec/ergodone/keymaps/erovia/keymap.c new file mode 100644 index 0000000000..279c8a57c1 --- /dev/null +++ b/keyboards/ktec/ergodone/keymaps/erovia/keymap.c @@ -0,0 +1,229 @@ +#include QMK_KEYBOARD_H +#include "version.h" +#include "bootmagic.h" + +#define QWERTY 0 // qwerty layer +#define COLEMAK 1 // colemak layer +#define FN 2 // function layer + +enum custom_keycodes { + QWRTY = SAFE_RANGE, // can always be here + CLMK, + VRSN, + FNCTN +}; + +/* false: Caps Lock LED is off + true: Caps Lock LED is on */ +bool CAPS_LED = false; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Qwerty layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | Copy | | Paste| 6 | 7 | 8 | 9 | 0 | Sleep | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | Mute | | { | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | [ |------+------+------+------+------+--------| + * | Esc | A | S | D | F | G |------| |------| H | J | K | L | ; | ' | + * |--------+------+------+------+------+------| Fn1 | | } |------+------+------+------+------+--------| + * | LShift | Z | X | C | V | B | | | ] | N | M | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |LCtrl | LGui | LAlt | Left | Right| | Down | Up | - | = | RCtrl | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | Caps | LGui | | Ins | Del | + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[QWERTY] = LAYOUT_ergodox( // layer 0 : qwerty + // left hand + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_COPY, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_MUTE, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, TT(FN), + KC_LCTL, KC_LGUI, KC_LALT, KC_LEFT, KC_RGHT, + KC_CAPS, KC_LGUI, + KC_HOME, + KC_SPC, KC_BSPC, KC_END, + // right hand + KC_PASTE, KC_6, KC_7, KC_8, KC_9, KC_0, KC_SLEP, + KC_LBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOTE, + KC_RBRC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, + KC_DOWN, KC_UP, KC_MINS, KC_EQL, KC_RCTL, + KC_INS, KC_DEL, + KC_PGUP, + KC_PGDN, KC_TAB, KC_ENT +), +/* Keymap 1: Colemak layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | Copy | | Paste| 6 | 7 | 8 | 9 | 0 | Sleep | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | F | P | B | Mute | | { | J | L | U | Y | ; | \ | + * |--------+------+------+------+------+------| | | [ |------+------+------+------+------+--------| + * | Esc | A | R | S | T | G |------| |------| M | N | E | I | O | ' | + * |--------+------+------+------+------+------| Fn1 | | } |------+------+------+------+------+--------| + * | LShift | Z | X | C | D | V | | | ] | K | H | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |LCtrl | LGui | LAlt | Left | Right| | Down | Up | - | = | RCtrl | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | Caps | LGui | | Ins | Del | + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +[COLEMAK] = LAYOUT_ergodox( // layer 1 : colemak + // left hand + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_COPY, + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_MUTE, + KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_G, + KC_LSPO, KC_Z, KC_X, KC_C, KC_D, KC_V, TT(FN), + KC_LCTL, KC_LGUI, KC_LALT, KC_LEFT, KC_RGHT, + KC_CAPS, KC_LGUI, + KC_HOME, + KC_SPC, KC_BSPC, KC_END, + // right hand + KC_PASTE, KC_6, KC_7, KC_8, KC_9, KC_0, KC_SLEP, + KC_LBRC, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSLS, + KC_M, KC_N, KC_E, KC_I, KC_O, KC_QUOTE, + KC_RBRC, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, + KC_DOWN, KC_UP, KC_MINS, KC_EQL, KC_RCTL, + KC_INS, KC_DEL, + KC_PGUP, + KC_PGDN, KC_TAB, KC_ENT +), +/* Keymap 2: Function Layer + * + * ,---------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | F11 | | F12 | F6 | F7 | F8 | F9 | F10 | | + * |---------+------+------+------+------+------+------| |------+------+------+------+------+------+--------| + * | | | | Prev | Play | Next | | | | | | | | | | + * |---------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | |VolDn | VolUp|------| |------| |QWRTY | CLMK | | | | + * |---------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `---------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `-----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// Functions +[FN] = LAYOUT_ergodox( + // left hand + VRSN, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, QWRTY, CLMK, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case VRSN: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + return false; + break; + case QWRTY: + if (record->event.pressed) { + set_single_persistent_default_layer(QWERTY); + } + return false; + break; + case CLMK: + if (record->event.pressed) { + set_single_persistent_default_layer(COLEMAK); + } + return false; + break; + case KC_CAPS: + if (record->event.pressed) { + // Turn LED1 On/Off for Caps Lock + if (CAPS_LED) { + ergodox_right_led_1_off(); + CAPS_LED = false; + } else { + ergodox_right_led_1_on(); + CAPS_LED = true; + } + } + return true; + break; + } + return true; +}; + +// Set LED according to the default layer +void default_layer_led_set(void) { + switch (biton32(eeconfig_read_default_layer())) { + case COLEMAK: + // LED2 for COLEMAK + ergodox_right_led_2_on(); + break; + case QWERTY: + // LED3 for QWERTY + ergodox_right_led_3_on(); + break; + }; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + default_layer_led_set(); +}; + +layer_state_t layer_state_set_user(layer_state_t state) { + ergodox_led_all_off(); + switch (biton32(state)) { + case FN: + // Red led on Pro Micro for Fn layer + ergodox_board_led_on(); + break; + }; + + if (CAPS_LED) { + ergodox_right_led_1_on(); + } + + default_layer_led_set(); + + return state; +}; + +void suspend_power_down_user(void) { + ergodox_led_all_off(); +}; + +void suspend_wakeup_init_user(void) { + default_layer_led_set(); +}; diff --git a/keyboards/ktec/ergodone/keymaps/erovia/readme.md b/keyboards/ktec/ergodone/keymaps/erovia/readme.md new file mode 100644 index 0000000000..160c875983 --- /dev/null +++ b/keyboards/ktec/ergodone/keymaps/erovia/readme.md @@ -0,0 +1,76 @@ +# Erovia's ErdoDone Keymap + +My personal ErgoDone keymap based on the *default* keymap. + +**Features** + +* Qwerty and Colemak Mod-DH support +* Space Cadet Shift +* LED indicator for: active layout, CapsLock, Function layer + +## QWERTY (Normal) Layer +``` +,--------------------------------------------------. ,--------------------------------------------------. +| ` | 1 | 2 | 3 | 4 | 5 | Copy | | Paste| 6 | 7 | 8 | 9 | 0 | Sleep | +|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +| Tab | Q | W | E | R | T | Mute | | { | Y | U | I | O | P | \ | +|--------+------+------+------+------+------| | | [ |------+------+------+------+------+--------| +| Esc | A | S | D | F | G |------| |------| H | J | K | L | ; | ' | +|--------+------+------+------+------+------| Fn1 | | } |------+------+------+------+------+--------| +| LShift | Z | X | C | V | B | | | ] | N | M | , | . | / | RShift | +`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + |LCtrl | LGui | LAlt | Left | Right| | Down | Up | - | = | RCtrl | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | Caps | LGui | | Ins | Del | + ,------|------|------| |------+--------+------. + | | | Home | | PgUp | | | + | Space|Backsp|------| |------| Tab |Enter | + | |ace | End | | PgDn | | | + `--------------------' `----------------------' +``` + +## Colemak Layer +Switch from `Fn1` layer. +``` +,--------------------------------------------------. ,--------------------------------------------------. +| ` | 1 | 2 | 3 | 4 | 5 | Copy | | Paste| 6 | 7 | 8 | 9 | 0 | Sleep | +|--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +| Tab | Q | W | F | P | B | Mute | | { | J | L | U | Y | ; | \ | +|--------+------+------+------+------+------| | | [ |------+------+------+------+------+--------| +| Esc | A | R | S | T | G |------| |------| M | N | E | I | O | ' | +|--------+------+------+------+------+------| Fn1 | | } |------+------+------+------+------+--------| +| LShift | Z | X | C | D | V | | | ] | K | H | , | . | / | RShift | +`--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + |LCtrl | LGui | LAlt | Left | Right| | Down | Up | - | = | RCtrl | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | Caps | LGui | | Ins | Del | + ,------|------|------| |------+--------+------. + | | | Home | | PgUp | | | + | Space|Backsp|------| |------| Tab |Enter | + | |ace | End | | PgDn | | | + `--------------------' `----------------------' +``` + +## Function Layer +``` +,---------------------------------------------------. ,--------------------------------------------------. +|Version | F1 | F2 | F3 | F4 | F5 | F11 | | F12 | F6 | F7 | F8 | F9 | F10 | | +|---------+------+------+------+------+------+------| |------+------+------+------+------+------+--------| +| | | | Prev | Play | Next | | | | | | | | | | +|---------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| | | | |VolDn | VolUp|------| |------| |QWRTY | CLMK | | | | +|---------+------+------+------+------+------| | | |------+------+------+------+------+--------| +| | | | | | | | | | | | | | | | +`---------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + | | | | | | | | | | | | + `-----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | | | | | | + ,------|------|------| |------+------+------. + | | | | | | | | + | | |------| |------| | | + | | | | | | | | + `--------------------' `--------------------' +``` diff --git a/keyboards/ktec/ergodone/keymaps/erovia/rules.mk b/keyboards/ktec/ergodone/keymaps/erovia/rules.mk new file mode 100644 index 0000000000..f7b7da719e --- /dev/null +++ b/keyboards/ktec/ergodone/keymaps/erovia/rules.mk @@ -0,0 +1 @@ +COMMAND_ENABLE = no # Commands for debug and configuration diff --git a/keyboards/ktec/ergodone/keymaps/kloki/keymap.c b/keyboards/ktec/ergodone/keymaps/kloki/keymap.c new file mode 100644 index 0000000000..87e96d20fd --- /dev/null +++ b/keyboards/ktec/ergodone/keymaps/kloki/keymap.c @@ -0,0 +1,219 @@ +#include QMK_KEYBOARD_H +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +#define BASE 0 // default layer +#define QW 1 // qwerty +#define SYMB 2 // symbols +#define NUM 3 // media keys + +enum custom_keycodes { + PLACEHOLDER = SAFE_RANGE, // can always be here + EPRM, + VRSN, + RGB_SLD +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | SHIFT| | SYM | 6 | 7 | 8 | 9 | 0 | Bck | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | D | R | W | B | `~ | | "' | J | F | U | P | : | \ | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Ctr/Es | A | S | H | T | G |------| |------| Y | N | E | O | I | Enter | + * |--------+------+------+------+------+------| = + | | -_ |------+------+------+------+------+--------| + * | LShift | Z | X | M | C | V | | | | K | L | , | . | / | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |MEH | Gui |AltShf| Left | Right| | DOWN | UP | [ | ] | ~SYM | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | ESC |Home | | PgUp | QW | + * ,------|------|------| |------+--------+------. + * | | ENT | End | | PgDn | | | + * | Space| WIN |------| |------| Tab |Back | + * | SYM | | SCTR | | SALT | SYM | | + * `--------------------' `----------------------' + */ + +[BASE] = LAYOUT_ergodox( // layer 0 : default + // left hand + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LSFT, + KC_TAB, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_GRV, + CTL_T(KC_ESC), KC_A, KC_S, KC_H, KC_T, KC_G, + KC_LSFT, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_EQL, + KC_MEH, KC_LGUI, KC_LALT, KC_LEFT,KC_RGHT, + KC_ESC, KC_HOME, + KC_END, + LT(SYMB, KC_SPC), LGUI_T(KC_ENT), S(KC_LGUI), + // right hand + TG(NUM), KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_QUOT, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_BSLS, + KC_Y, KC_N, KC_E, KC_O, KC_I , KC_ENT, + KC_MINS, KC_K, KC_L, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, + KC_DOWN,KC_UP, KC_LBRC,KC_RBRC, MO(SYMB), + KC_PGUP, TG(QW), + KC_PGDN, + S(KC_LALT),LT(SYMB, KC_TAB), KC_BSPC + ), + +[QW] = LAYOUT_ergodox( + _______, _______, _______, _______, _______, _______, _______, + _______, KC_Q, KC_W, KC_E, KC_R, KC_T, _______, + _______, KC_A, KC_S, KC_D, KC_F, KC_G, + _______, KC_Z, KC_X, KC_C, KC_V, KC_B, _______, + _______, _______, _______, _______, _______, + _______, _______, + _______, + _______, _______, _______, + // right hand + _______, _______, _______, _______, _______, _______, _______, + _______, KC_Y, KC_U, KC_I , KC_O, KC_P, _______, + KC_H, KC_J, KC_K , KC_L, KC_SCLN, _______, + _______, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, + _______, _______, _______, _______, _______, + _______, _______, + _______, + _______, _______, _______ +), +/* Keymap 1: Symbol Layer + * + * ,---------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | DEL | + * |---------+------+------+------+------+------+------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | * | | | | < | H | U | PU | * | | + * |---------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| > | L | D | R | + | | + * |---------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | E | D | PD | \ | | + * `---------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `-----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = LAYOUT_ergodox( + // left hand + _______,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, + _______,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_ASTR,_______, + _______,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + _______,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,_______, + _______,_______,_______,_______,_______, + _______,_______, + _______, + _______,_______,_______, + // right hand + _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL, + _______, KC_LABK, KC_HOME, KC_UP, KC_PGUP, KC_ASTR, _______, + KC_RABK, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PLUS, _______, + _______, KC_AMPR, KC_END, KC_DOWN, KC_PGDN, KC_BSLS, _______, + _______, _______, _______, _______, _______, + _______, _______, + _______, + _______, _______, _______ +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | L | MsUp | R | | | | | | 4 | 5 | 6 | | TAB | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | 1 | 2 | 3 | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | 0 | 0 | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[NUM] = LAYOUT_ergodox( + _______, _______, _______, _______, _______, _______, _______, + _______, _______, KC_BTN1, KC_MS_U, KC_BTN2, _______, _______, + _______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + _______, _______, + _______, + _______, _______, _______, + // right hand + _______, _______, _______, _______, _______, _______, _______, + _______, _______, KC_4, KC_5 , KC_6, _______, KC_TAB, + _______, KC_1, KC_2 , KC_3, _______, _______, + _______, _______, _______, KC_0, KC_0, _______, _______, + _______, _______, _______, _______, _______, + _______, _______, + _______, + _______, _______, _______ +), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + // dynamically generate these. + case EPRM: + if (record->event.pressed) { + eeconfig_init(); + } + return false; + break; + case VRSN: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + return false; + break; + case RGB_SLD: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + rgblight_mode(1); + #endif + } + return false; + break; + } + return true; +} + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case 1: + ergodox_board_led_on(); + break; + case 3: + ergodox_board_led_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ktec/ergodone/keymaps/kloki/readme.md b/keyboards/ktec/ergodone/keymaps/kloki/readme.md new file mode 100644 index 0000000000..a9ebaba67e --- /dev/null +++ b/keyboards/ktec/ergodone/keymaps/kloki/readme.md @@ -0,0 +1,7 @@ +# Kloki's ergodone layout + +-workman +-qwerty layer +-num layer +-overloaded modifier +-a lot of duplicated keys to make common shortcuts work
\ No newline at end of file diff --git a/keyboards/ktec/ergodone/keymaps/vega/keymap.c b/keyboards/ktec/ergodone/keymaps/vega/keymap.c new file mode 100644 index 0000000000..ee6c56bf95 --- /dev/null +++ b/keyboards/ktec/ergodone/keymaps/vega/keymap.c @@ -0,0 +1,555 @@ +#include QMK_KEYBOARD_H + +enum layer_names { + BASE, + GREL, + GREU, + SYMB, + MATH, + QWER, + FNLR +}; + +enum unicode_names { + //MATH + neq, //≠ + intgrl, //∫ + angl, //∠ + imply, //⇒ + equiv, //⇔ + porp, //∝ + exists, //∃ + nexists, //∄ + forall, //∀ + and, //∧ + or, //∨ + xor, //⊕ + apeql, //≅ + root, //√ + not, //¬ + sum, //∑ + plsminus, //± + infin, //∞ + emtyset, //∅ + Mn, //ℕ + Mz, //ℤ + Mq, //ℚ + Mr, //ℝ + Mc, //ℂ + eleof, //∈ + member, //∋ + neleof, //∉ + nmember, //∌ + subsetof, //⊂ + suprsetof, //⊃ + intersection, //∩ + Munion, //∪ + + //SYMB + arwl, + arwu, + arwr, + arwd, + + uxclm, + cent, + degree, + trade, + copy, + numero, + sect, + mdot, + rang, + + + lshade, + mshade, + dshade, + + fire, + water, + cleft, + baster, + neteen, + floppy, + + boxemp, + boxchk, + boxX, + + bbstr, + bbstl, + bbml, + bbmr, + bbmb, + bbrtr, + bbrbr, + bbrtl, + bbrbl, + bbsbr, + bbsbl, + bbmbr, + bbmbl, + + Agrave, + Aacute, + Acircm, + Atilde, + Abreve, + Adiaer, + Adacut, + + // not all ogham letters, as I + // actually intend to use them for hex + OS, + Oa, + Ob, + Oc, + Od, + Oe, + Of, + Og, + Oh, + Oi, + OA, + OB, + OC, + OD, + OE, + OF, + Os, + OED, + Ox, + gnd, + sqr, + sine, + opt, + + geq, + leq, + brkup, + brkdn, + perup, + perdn, + + //GREEL + rone, // 1:: ⅰ + rtwo, + rthree, + rfour, // 4:: ⅳ + rfive, // 5:: ⅴ + rsix, // 6:: ⅵ + rseven, // 7:: ⅶ + reight, // 8:: ⅷ + rnine, // 9:: ⅸ + rten, // 0:: ⅹ + gq, // q:: θ + gw, // w:: ω + ge, // e:: ε + gr, // r:: ρ + gt, // t:: τ + gy, // y:: ψ + gu, // u:: υ + gi, // i:: ι + go, // o:: ο + gp, // p:: π + ga, // a:: α + gs, // s:: σ + gd, // d:: δ + gf, // f:: φ + gg, // g:: γ + gh, // h:: η + gj, // j:: ϑ + gk, // k:: κ + gl, // l:: λ + gz, // z:: ζ + gx, // x:: ξ + gc, // c:: χ + gv, // v:: ς + gb, // b:: β + gn, // n:: ν + gm, // m:: μ + + //GREEU + Rone, // 1:: Ⅰ + Rtwo, // 2:: Ⅱ + Rthree, // 3:: Ⅲ + Rfour, // 4:: Ⅳ + Rfive, // 5:: Ⅴ + Rsix, // 6:: Ⅵ + Rseven, // 7:: Ⅶ + Reight, // 8:: Ⅷ + Rnine, // 9:: Ⅸ + Rten, + Gq, // Q:: Θ + Gw, // W:: Ω + Ge, // E:: Ε + Gr, // R:: Ρ + Gt, // T:: Τ + Gy, // Y:: Ψ + Gu, // U:: Υ + Gi, // I:: Ι + Go, // O:: Ο + Gp, // P:: Π + Ga, // A:: Α + Gs, // S:: Σ + Gd, // D:: Δ + Gf, // F:: Φ + Gg, // G:: Γ + Gh, // H:: Η + Gj, // J:: J + Gk, // K:: Κ + Gl, // L:: Λ + Gz, // Z:: Ζ + Gx, // X:: Ξ + Gc, // C:: Χ + Gv, // V:: V + Gb, // B:: Β + Gn, // N:: Ν + Gm, // M:: Μ +}; + +const uint32_t PROGMEM unicode_map[] = { + //MATH + [neq] = 0x2260, //≠ + [intgrl] = 0x222B, //∫ + [angl] = 0x2220, //∠ + [imply] = 0x21D2, //⇒ + [equiv] = 0x21D4, //⇔ + [porp] = 0x221D, //∝ + [exists] = 0x2203, //∃ + [nexists] = 0x2204, //∄ + [forall] = 0x2200, //∀ + [and] = 0x2227, //∧ + [or] = 0x2228, //∨ + [xor] = 0x2295, //⊕ + [apeql] = 0x2245, //≅ + [root] = 0x221A, //√ + [not] = 0x00AC, //¬ + [sum] = 0x2211, //∑ + [plsminus] = 0x00B1, //± + [infin] = 0x221E, //∞ + [emtyset] = 0x2205, //∅ + [Mn] = 0x2115, //ℕ + [Mz] = 0x2124, //ℤ + [Mq] = 0x211A, //ℚ + [Mr] = 0x211D, //ℝ + [Mc] = 0x2102, //ℂ + [eleof] = 0x2208, //∈ + [member] = 0x220B, //∋ + [neleof] = 0x2209, //∉ + [nmember] = 0x220C, //∌ + [subsetof] = 0x2282, //⊂ + [suprsetof] = 0x2283, // + [intersection] = 0x2229, //∩ + [Munion] = 0x222A, //∪ + //Symbol + [arwl] = 0x2190, //← + [arwu] = 0x2191, //↑ + [arwr] = 0x2192, //→ + [arwd] = 0x2193, //↓ + + [uxclm] = 0x00A1, //¡ + [cent] = 0x00A2, //¢ + [degree] = 0x00B0, //° + [trade] = 0x2122, //™ + [copy] = 0x00A9, //© + [numero] = 0x2116, //№ + [sect] = 0x00A7, //§ + [mdot] = 0x00B7, //· + [rang] = 0x299C, //⦜ + + + [lshade] = 0x2591,//░ + [mshade] = 0x2592,//▒ + [dshade] = 0x2593,//▓ + + [fire] = 0x1F525, //🔥 + [water] = 0x1F322, //🌢 + [cleft] = 0x1F12F, //🄯 + [baster] = 0x1F7BC, //🞼 + [neteen] = 0x1F51E, //🔞 + [floppy] = 0x1F5AB, //🖫 + + [boxemp] = 0x2610, //☐ + [boxchk] = 0x2611, //☑ + [boxX] = 0x2612, //☒ + + [bbstr] = 0x23A1, //⎡ + [bbstl] = 0x23A4, //⎤ + [bbml] = 0x23A8, //⎨ + [bbmr] = 0x23AC, //⎬ + [bbmb] = 0x23AA, //⎪ + [bbrtr] = 0x23A7, //⎧ + [bbrbr] = 0x23A9, //⎩ + [bbrtl] = 0x23AB, //⎫ + [bbrbl] = 0x23AD, //⎭ + [bbsbr] = 0x23A3, //⎣ + [bbsbl] = 0x23A6, //⎦ + [bbmbr] = 0x23A5, //⎥ + [bbmbl] = 0x23A2, //⎢ + + [Agrave] = 0x0300,//è //above [wtf] = 0x1242A, //𒐪 + [Aacute] = 0x0301,//é //1st + [Acircm] = 0x0302,//ê //2nd + [Atilde] = 0x0303,//ẽ //5th + [Abreve] = 0x0306,//ĕ //4th + [Adiaer] = 0x0308,//ë //3rd + [Adacut] = 0x030B,//e̋ + + // not all ogham letters, as I + // actually intend to use them for hex + [OS] = 0x1680,//space + [Oa] = 0x1681,//1 + [Ob] = 0x1682,//2 + [Oc] = 0x1683,//3 + [Od] = 0x1684,//4 + [Oe] = 0x1685,//5 + [Of] = 0x1686,//6 + [Og] = 0x1687,//7 + [Oh] = 0x1688,//8 + [Oi] = 0x1689,//9 + [OA] = 0x168A,//A + [OB] = 0x168B,//B + [OC] = 0x168C,//C + [OD] = 0x168D,//D + [OE] = 0x168E,//E + [OF] = 0x168F,//F + [Os] = 0x169B,//Start + [OED] = 0x169C,//End + [Ox] = 0x1695,//X + + [gnd] = 0x23DA,//⏚ + [sqr] = 0x238D,//⎍, actually monostable + [sine] = 0x223F,//∿ + [opt] = 0x2325,//⌥, actually option used for switch + + [geq] = 0x2264, //≤ + [leq] = 0x2265, //≥ + [brkup] = 0xFE38, //︸ + [brkdn] = 0xFE37, //︷ + [perup] = 0xFE35, //︵ + [perdn] = 0xFE36, //︶ + //GREEKL + [rone] = 0x2170, // 1:: ⅰ + [rtwo] = 0x2171, // 2:: ⅱ + [rthree] = 0x2172, // 3:: ⅲ + [rfour] = 0x2173, // 4:: ⅳ + [rfive] = 0x2174, // 5:: ⅴ + [rsix] = 0x2175, // 6:: ⅵ + [rseven] = 0x2176, // 7:: ⅶ + [reight] = 0x2177, // 8:: ⅷ + [rnine] = 0x2178, // 9:: ⅸ + [rten] = 0x2179, // 0:: ⅹ + [gq] = 0x03B8, // q:: θ + [gw] = 0x03C9, // w:: ω + [ge] = 0x03B5, // e:: ε + [gr] = 0x03C1, // r:: ρ + [gt] = 0x03C4, // t:: τ + [gy] = 0x03C8, // y:: ψ + [gu] = 0x03C5, // u:: υ + [gi] = 0x03B9, // i:: ι + [go] = 0x03BF, // o:: ο + [gp] = 0x03C0, // p:: π + [ga] = 0x03B1, // a:: α + [gs] = 0x03C3, // s:: σ + [gd] = 0x03B4, // d:: δ + [gf] = 0x03C6, // f:: φ + [gg] = 0x03B3, // g:: γ + [gh] = 0x03B7, // h:: η + [gj] = 0x03D1, // j:: ϑ + [gk] = 0x03BA, // k:: κ + [gl] = 0x03BB, // l:: λ + [gz] = 0x03B6, // z:: ζ + [gx] = 0x03BE, // x:: ξ + [gc] = 0x03C7, // c:: χ + [gv] = 0x03C2, // v:: ς + [gb] = 0x03B2, // b:: β + [gn] = 0x03BD, // n:: ν + [gm] = 0x03BC, // m:: μ + //GREEKU + [Rone] = 0x2160, // 1:: Ⅰ + [Rtwo] = 0x2161, // 2:: Ⅱ + [Rthree] = 0x2162, // 3:: Ⅲ + [Rfour] = 0x2163, // 4:: Ⅳ + [Rfive] = 0x2164, // 5:: Ⅴ + [Rsix] = 0x2165, // 6:: Ⅵ + [Rseven] = 0x2166, // 7:: Ⅶ + [Reight] = 0x2167, // 8:: Ⅷ + [Rnine] = 0x2168, // 9:: Ⅸ + [Rten] = 0x2169, // 0:: Ⅹ + [Gq] = 0x0398, // Q:: Θ + [Gw] = 0x03A9, // W:: Ω + [Ge] = 0x0395, // E:: Ε + [Gr] = 0x03A1, // R:: Ρ + [Gt] = 0x03A4, // T:: Τ + [Gy] = 0x03A8, // Y:: Ψ + [Gu] = 0x03A5, // U:: Υ + [Gi] = 0x0399, // I:: Ι + [Go] = 0x039F, // O:: Ο + [Gp] = 0x03A0, // P:: Π + [Ga] = 0x0391, // A:: Α + [Gs] = 0x03A3, // S:: Σ + [Gd] = 0x0394, // D:: Δ + [Gf] = 0x03A6, // F:: Φ + [Gg] = 0x0393, // G:: Γ + [Gh] = 0x0397, // H:: Η + [Gj] = 0x004A, // J:: J + [Gk] = 0x039A, // K:: Κ + [Gl] = 0x039B, // L:: Λ + [Gz] = 0x0396, // Z:: Ζ + [Gx] = 0x039E, // X:: Ξ + [Gc] = 0x03A7, // C:: Χ + [Gv] = 0x0056, // V:: V + [Gb] = 0x0392, // B:: Β + [Gn] = 0x039D, // N:: Ν + [Gm] = 0x039C, // M:: Μ +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[BASE] = LAYOUT_ergodox( // layer 0 : default + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_GRV, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_BSLS, + KC_EQL, KC_A, KC_O, KC_E, KC_U, KC_I, + KC_LSPO, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_AMPR, + OSL(FNLR), TT(GREL), TT(MATH), KC_UP, KC_DOWN, + KC_LBRC, KC_HOME, KC_INS, KC_SPC, KC_LGUI, KC_DEL, + + OSL(FNLR), KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_PGUP, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, + KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, + KC_PGDN, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSPC, + KC_LEFT, KC_RIGHT, KC_RALT, TT(SYMB), TT(QWER), + KC_END, KC_RBRC, KC_PSCR, KC_RALT, KC_RCTL, KC_ENT +), + +[FNLR] = LAYOUT_ergodox( + // left hand + UC_M_LN, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_NO, + UC_M_WC,KC_F11, KC_F12, KC_F13,KC_F14, KC_F15, KC_NO, + KC_NO,KC_F21, KC_F22, KC_F23,KC_F24, KC_NO, + KC_NO,KC_PAUSE,KC_PSCR,KC_SLCK,KC_NO,KC_NO,KC_NO, + EEP_RST,TO(BASE),TO(BASE),TO(BASE),TO(BASE), + KC_NO,KC_NO, + KC_NO, + KC_NO,KC_NO,KC_NO, + // right hand + TO(BASE), KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, UC_M_LN, + KC_NO, KC_F16, KC_F17,KC_F18, KC_F19, KC_F20, UC_M_WI, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO,KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_RCTL, KC_NO +), + +[QWER] = LAYOUT_ergodox( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_BSLS, + KC_AMPR, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_QUOT, + KC_BSLS, KC_LCTL, KC_LGUI, KC_RALT, KC_APP, + KC_LBRC, KC_HOME, KC_PGUP, KC_SPC, KC_LSFT, KC_PGDN, + + OSL(FNLR), KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_MINS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_SLSH, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_EQL, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, + KC_UP, KC_DOWN, KC_LEFT, KC_RIGHT, TO(BASE), + KC_END, KC_INS, KC_DEL, KC_RGHT, KC_ENT, KC_SPC +), + +[MATH] = LAYOUT_ergodox( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_GRV, + KC_TAB, X(Mc), X(Munion), X(arwl), X(or), X(exists), KC_BSLASH, + X(arwr), X(root), X(and), X(imply), X(nexists), X(forall), + KC_LSPO, KC_SCLN, X(intgrl), X(Mn), X(Mz), X(member), X(arwl), + KC_MS_L, TO(BASE), TO(BASE), KC_INS, KC_DEL, + KC_LBRC, KC_HOME, KC_UP, KC_SPC, KC_LGUI, KC_DOWN, + + TT(FNLR), KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_PGUP, X(plsminus), X(infin), X(neleof), X(equiv), X(Mq), KC_EQL, + X(sum), X(emtyset), X(porp), X(suprsetof), X(not), X(neq), + KC_PGDN, X(subsetof), X(intersection), X(angl), X(nmember), X(eleof), KC_RSPC, + KC_RCTL, KC_RALT, KC_APP, TO(BASE), TO(BASE), + KC_END, KC_RBRC, KC_LEFT, KC_RGHT, KC_ENT, KC_SPC +), + +[SYMB] = LAYOUT_ergodox( + X(Os), X(Oa), X(Ob), X(Oc), X(Od), X(Oe), X(mdot), + X(boxemp), X(bbstr), X(bbrtr), X(bbrtl), X(bbstl), X(degree), X(brkdn), + X(boxchk), X(bbmbl), X(bbml), X(bbmr), X(bbmbr), X(neteen), + X(boxX), X(bbsbr), X(bbrbr), X(bbrbl), X(bbsbl), X(uxclm), X(brkup), + X(floppy), TO(BASE), TO(BASE), X(arwu), X(arwd), + X(fire), X(lshade), X(mshade), KC_SPC, X(OS), X(dshade), + + X(Ox), X(Of), X(Og), X(Oh), X(Oi), X(OA), X(OB), + X(numero), X(trade), X(copy), X(cleft), X(cent), X(OED), X(OC), + X(Agrave), X(gnd), X(sqr), X(sine), X(opt), X(OD), + X(sect), X(Aacute), X(Acircm), X(Adiaer), X(Abreve), X(Atilde), X(OE), + X(arwl), X(arwr), X(geq), X(leq), X(OF), + X(rang), X(water), X(perup), X(perdn), X(baster), KC_ENT +), + +[GREL] = LAYOUT_ergodox( + KC_ESC, X(Rone), X(Rtwo), X(Rthree), X(Rfour), X(Rfive), KC_GRV, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, X(gp), X(gy), KC_SLSH, + KC_SLSH, X(ga), X(go), X(ge), X(gu), X(gi), + MO(GREU), KC_SCLN, X(gq), X(gj), X(gk), X(gx), KC_AMPR, + KC_MS_L, TO(BASE), TO(BASE), KC_INS, KC_DEL, + KC_LBRC, KC_HOME, KC_UP, KC_SPC, KC_LGUI, KC_DOWN, + + TO(BASE), X(Rsix), X(Rseven), X(Reight), X(Rnine), X(Rten), KC_BSPC, + KC_PGUP, X(gf), X(gg), X(gc), X(gr), X(gl), KC_EQL, + X(gd), X(gh), X(gt), X(gn), X(gs), KC_MINS, + KC_PGDN, X(gb), X(gm), X(gw), X(gv), X(gz), MO(GREU), + KC_RCTL, KC_RALT, KC_APP, TO(BASE), TO(BASE), + KC_END, KC_RBRC, KC_LEFT, KC_RGHT, KC_ENT, KC_SPC +), + +[GREU] = LAYOUT_ergodox( + KC_ESC, X(Rone), X(Rtwo), X(Rthree), X(Rfour), X(Rfive), KC_GRV, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, X(Gp), X(Gy), KC_SLSH, + KC_SLSH, X(Ga), X(Go), X(Ge), X(Gu), X(Gi), + KC_TRNS, KC_SCLN, X(Gq), X(Gj), X(Gk), X(Gx), KC_AMPR, + KC_MS_L, TO(BASE), TO(BASE), KC_INS, KC_DEL, + KC_LBRC, KC_HOME, KC_UP, KC_SPC, KC_LGUI, KC_DOWN, + + TO(BASE), X(Rsix), X(Rseven), X(Reight), X(Rnine), X(Rten), KC_BSPC, + KC_PGUP, X(Gf), X(Gg), X(Gc), X(Gr), X(Gl), KC_EQL, + X(Gd), X(Gh), X(Gt), X(Gn), X(Gs), KC_MINS, + KC_PGDN, X(Gb), X(Gm), X(Gw), X(Gv), X(Gz), KC_TRNS, + KC_RCTL, KC_RALT, KC_APP, TO(BASE), TO(BASE), + KC_END, KC_RBRC, KC_LEFT, KC_RGHT, KC_ENT, KC_SPC +), + +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } +}; diff --git a/keyboards/ktec/ergodone/keymaps/vega/rules.mk b/keyboards/ktec/ergodone/keymaps/vega/rules.mk new file mode 100644 index 0000000000..d4b8547225 --- /dev/null +++ b/keyboards/ktec/ergodone/keymaps/vega/rules.mk @@ -0,0 +1,2 @@ +UNICODE_ENABLE = no # Unicode +UNICODEMAP_ENABLE = yes diff --git a/keyboards/ktec/ergodone/keymaps/via/config.h b/keyboards/ktec/ergodone/keymaps/via/config.h new file mode 100644 index 0000000000..fc7744c763 --- /dev/null +++ b/keyboards/ktec/ergodone/keymaps/via/config.h @@ -0,0 +1,18 @@ + /* Copyright HarshitGoel96 2021 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + //Keymap specific config.h +#pragma once +#define DYNAMIC_KEYMAP_LAYER_COUNT 4
\ No newline at end of file diff --git a/keyboards/ktec/ergodone/keymaps/via/keymap.c b/keyboards/ktec/ergodone/keymaps/via/keymap.c new file mode 100644 index 0000000000..f155a4b51d --- /dev/null +++ b/keyboards/ktec/ergodone/keymaps/via/keymap.c @@ -0,0 +1,196 @@ + /* Copyright HarshitGoel96 2021 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +enum layer_names { + QRTY, // qwerty above workman to make sure transparent does not catch unwanted keycode + SYMB, // symbols + MDIA, // media keys + EXTRA, // added extra layer for via +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | LEFT | | RIGHT| 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | App | LGui | | Alt |Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* + +[QRTY] = LAYOUT_ergodox( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, TT(SYMB), + KC_LALT, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,---------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |---------+------+------+------+------+------+------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |---------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |---------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `---------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | EEP_RST | | | | | | | . | 0 | = | | + * `-----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * |Animat| | |Toggle|Solid | + * ,------|------|------| |------+------+------. + * |Bright|Bright| | | |Hue- |Hue+ | + * |ness- |ness+ |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = LAYOUT_ergodox( + // left hand + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + EEP_RST ,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + RGB_MOD,KC_TRNS, + KC_TRNS, + RGB_VAD,RGB_VAI,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + RGB_TOG, RGB_M_P , + KC_TRNS, + KC_TRNS, RGB_HUD, RGB_HUI +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = LAYOUT_ergodox( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +[EXTRA] = LAYOUT_ergodox( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +) +}; + +// Runs constantly in the background, in a loop. + +layer_state_t layer_state_set_user(layer_state_t state) { + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (get_highest_layer(state)) { + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + case 3: + ergodox_right_led_3_on(); + break; + default: + // none + break; + } + return state; +} diff --git a/keyboards/ktec/ergodone/keymaps/via/readme.md b/keyboards/ktec/ergodone/keymaps/via/readme.md new file mode 100644 index 0000000000..223cb892ba --- /dev/null +++ b/keyboards/ktec/ergodone/keymaps/via/readme.md @@ -0,0 +1,5 @@ + +## Changelog +HarshitGoel96 + +I love my ergodone, but it needed via, so here it is. Flash using HIDBOOTLOADER as described in keyboard root read.md and enjoy via on ergodone.
\ No newline at end of file diff --git a/keyboards/ktec/ergodone/keymaps/via/rules.mk b/keyboards/ktec/ergodone/keymaps/via/rules.mk new file mode 100644 index 0000000000..43061db1dd --- /dev/null +++ b/keyboards/ktec/ergodone/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/ktec/ergodone/matrix.c b/keyboards/ktec/ergodone/matrix.c new file mode 100644 index 0000000000..3973ff3484 --- /dev/null +++ b/keyboards/ktec/ergodone/matrix.c @@ -0,0 +1,256 @@ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include "wait.h" +#include "action_layer.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "ergodone.h" +#include "expander.h" + +/* + * This constant define not debouncing time in msecs, but amount of matrix + * scan loops which should be made to get stable debounced results. + * + * On Ergodox matrix scan rate is relatively low, because of slow I2C. + * Now it's only 317 scans/second, or about 3.15 msec/scan. + * According to Cherry specs, debouncing time is 5 msec. + * + * And so, there is no sense to have DEBOUNCE higher than 2. + */ + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; + +// Debouncing: store for each key the number of scans until it's eligible to +// change. When scanning the matrix, ignore any changes in keys that have +// already changed in the last DEBOUNCE scans. +static uint8_t debounce_matrix[MATRIX_ROWS * MATRIX_COLS]; + +static matrix_row_t read_cols(uint8_t row); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +__attribute__ ((weak)) +void matrix_init_user(void) {} + +__attribute__ ((weak)) +void matrix_scan_user(void) {} + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + for (uint8_t j=0; j < MATRIX_COLS; ++j) { + debounce_matrix[i * MATRIX_COLS + j] = 0; + } + } + + matrix_init_quantum(); +} + +void matrix_power_up(void) { + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + } +} + +// Returns a matrix_row_t whose bits are set if the corresponding key should be +// eligible to change in this scan. +matrix_row_t debounce_mask(uint8_t row) { + matrix_row_t result = 0; + for (uint8_t j=0; j < MATRIX_COLS; ++j) { + if (debounce_matrix[row * MATRIX_COLS + j]) { + --debounce_matrix[row * MATRIX_COLS + j]; + } else { + result |= (1 << j); + } + } + return result; +} + +// Report changed keys in the given row. Resets the debounce countdowns +// corresponding to each set bit in 'change' to DEBOUNCE. +void debounce_report(matrix_row_t change, uint8_t row) { + for (uint8_t i = 0; i < MATRIX_COLS; ++i) { + if (change & (1 << i)) { + debounce_matrix[row * MATRIX_COLS + i] = DEBOUNCE; + } + } +} + +uint8_t matrix_scan(void) +{ + expander_scan(); + + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + select_row(i); + wait_us(30); // without this wait read unstable value. + matrix_row_t mask = debounce_mask(i); + matrix_row_t cols = (read_cols(i) & mask) | (matrix[i] & ~mask); + debounce_report(cols ^ matrix[i], i); + matrix[i] = cols; + + unselect_rows(); + } + + matrix_scan_quantum(); + + return 1; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + +/* Column pin configuration + * + * Pro Micro: 6 5 4 3 2 1 0 + * PD3 PD2 PD4 PC6 PD7 PE6 PB4 + * + * Expander: 13 12 11 10 9 8 7 + */ +static void init_cols(void) +{ + // Pro Micro + DDRE &= ~(1<<PE6); + PORTE |= (1<<PE6); + DDRD &= ~(1<<PD2 | 1<<PD3 | 1<<PD4 | 1<<PD7); + PORTD |= (1<<PD2 | 1<<PD3 | 1<<PD4 | 1<<PD7); + DDRC &= ~(1<<PC6); + PORTC |= (1<<PC6); + DDRB &= ~(1<<PB4); + PORTB |= (1<<PB4); + + // MCP23017 + expander_init(); +} + +static matrix_row_t read_cols(uint8_t row) +{ + return expander_read_row() | + (PIND&(1<<PD3) ? 0 : (1<<6)) | + (PIND&(1<<PD2) ? 0 : (1<<5)) | + (PIND&(1<<PD4) ? 0 : (1<<4)) | + (PINC&(1<<PC6) ? 0 : (1<<3)) | + (PIND&(1<<PD7) ? 0 : (1<<2)) | + (PINE&(1<<PE6) ? 0 : (1<<1)) | + (PINB&(1<<PB4) ? 0 : (1<<0)) ; +} + +/* Row pin configuration + * + * Pro Micro: 0 1 2 3 4 5 + * F4 F5 F6 F7 B1 B2 + * + * Expander: 0 1 2 3 4 5 + */ +static void unselect_rows(void) +{ + // Pro Micro + DDRF &= ~(1<<PF4 | 1<<PF5 | 1<<PF6 | 1<<PF7); + PORTF &= ~(1<<PF4 | 1<<PF5 | 1<<PF6 | 1<<PF7); + DDRB &= ~(1<<PB1 | 1<<PB2); + PORTB &= ~(1<<PB1 | 1<<PB2); + + // Expander + expander_unselect_rows(); +} + +static void select_row(uint8_t row) +{ + // Pro Micro + switch (row) { + case 0: + DDRF |= (1<<PF4); + PORTF &= ~(1<<PF4); + break; + case 1: + DDRF |= (1<<PF5); + PORTF &= ~(1<<PF5); + break; + case 2: + DDRF |= (1<<PF6); + PORTF &= ~(1<<PF6); + break; + case 3: + DDRF |= (1<<PF7); + PORTF &= ~(1<<PF7); + break; + case 4: + DDRB |= (1<<PB1); + PORTB &= ~(1<<PB1); + break; + case 5: + DDRB |= (1<<PB2); + PORTB &= ~(1<<PB2); + break; + } + + expander_select_row(row); +} + diff --git a/keyboards/ktec/ergodone/readme.md b/keyboards/ktec/ergodone/readme.md new file mode 100644 index 0000000000..82c1043dad --- /dev/null +++ b/keyboards/ktec/ergodone/readme.md @@ -0,0 +1,33 @@ +ErgoDone +======== + + + +The ErgoDone is a modified version of the ErgoDox, made by K.T.E.C., with pre-soldered components. It has different wiring and uses a SparkFun Pro Micro instead of Teensy. + +- Keyboard maintainer: [Yu He](http://github.com/yuhe00) +- Hardware supported: + - ErgoDone v1.3 (tested) +- Hardware availability: + - [AliExpress](https://www.aliexpress.com/store/product/ergodone-Custom-Mechanical-Keyboard-TKG-TOOLS-PCB-programmed-Ergonomic-Keyboard-Kit-similar-with-infinity-ergodox/3034003_32830050940.html) + - [KBDfans](https://kbdfans.myshopify.com/collections/pcb/products/ergodone-keyboard-pcb-1pcs-free-shipping) + +# Building the firmware + +[Install the build tools.](https://docs.qmk.fm/#/getting_started_build_tools) + +In the root directory of the repository, build the firmware with a command like: + + make ergodone:default + +For more information on the layout option and other ones, see the [`make` guide](https://docs.qmk.fm/#/getting_started_make_guide). + +# Flashing the firmware onto the keyboard + +The ErgoDone uses a customized HID bootloader rather than the Teensy one. It doesn't need an OS driver, and the required actions before flashing are a little different than with an ErgoDox. + +1. To enter flash mode, disconnect the keyboard first. Then, on the left-hand device, in the top row, press and hold the two rightmost keys while reconnecting the keyboard. + +2. To flash the .hex file, use the `hid_bootloader_cli` utlity from the [TKG Toolkit](https://github.com/kairyu/tkg-toolkit) (as of 2017-10-03, only [this old version](https://github.com/kairyu/tkg-toolkit/blob/b14c67ca8bc84c07e5fc6b2e01ae4002b808243a/windows/bin/hid_bootloader_cli.exe) works under Windows): + + hid_bootloader_cli -mmcu=atmega32u4 ergodone_default.hex diff --git a/keyboards/ktec/ergodone/rules.mk b/keyboards/ktec/ergodone/rules.mk new file mode 100644 index 0000000000..7b88a1419c --- /dev/null +++ b/keyboards/ktec/ergodone/rules.mk @@ -0,0 +1,37 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina + +# Build Options +# comment out to disable the options. +# +CUSTOM_MATRIX = yes # Custom matrix file for the ErgoDone +UNICODE_ENABLE = yes # Unicode +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +USB_6KRO_ENABLE = no # USB 6key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +SWAP_HANDS_ENABLE = no # Disable Onehand +RGBLIGHT_ENABLE = no + +# project specific files +SRC = \ + twimaster.c \ + matrix.c \ + expander.c \ + +LAYOUTS = ergodox diff --git a/keyboards/ktec/ergodone/twimaster.c b/keyboards/ktec/ergodone/twimaster.c new file mode 100644 index 0000000000..d6f3f78405 --- /dev/null +++ b/keyboards/ktec/ergodone/twimaster.c @@ -0,0 +1,208 @@ +/************************************************************************* +* Title: I2C master library using hardware TWI interface +* Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury +* File: $Id: twimaster.c,v 1.3 2005/07/02 11:14:21 Peter Exp $ +* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3 +* Target: any AVR device with hardware TWI +* Usage: API compatible with I2C Software Library i2cmaster.h +**************************************************************************/ +#include <inttypes.h> +#include <compat/twi.h> + +#include "i2cmaster.h" + + +/* define CPU frequency in Mhz here if not defined in Makefile */ +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +/* I2C clock in Hz */ +#define SCL_CLOCK 400000L + + +/************************************************************************* + Initialization of the I2C bus interface. Need to be called only once +*************************************************************************/ +void i2c_init(void) +{ + /* initialize TWI clock + * minimal values in Bit Rate Register (TWBR) and minimal Prescaler + * bits in the TWI Status Register should give us maximal possible + * I2C bus speed - about 444 kHz + * + * for more details, see 20.5.2 in ATmega16/32 secification + */ + + TWSR = 0; /* no prescaler */ + TWBR = 10; /* must be >= 10 for stable operation */ + +}/* i2c_init */ + + +/************************************************************************* + Issues a start condition and sends address and transfer direction. + return 0 = device accessible, 1= failed to access device +*************************************************************************/ +unsigned char i2c_start(unsigned char address) +{ + uint8_t twst; + + // send START condition + TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); + + // wait until transmission completed + while(!(TWCR & (1<<TWINT))); + + // check value of TWI Status Register. Mask prescaler bits. + twst = TW_STATUS & 0xF8; + if ( (twst != TW_START) && (twst != TW_REP_START)) return 1; + + // send device address + TWDR = address; + TWCR = (1<<TWINT) | (1<<TWEN); + + // wail until transmission completed and ACK/NACK has been received + while(!(TWCR & (1<<TWINT))); + + // check value of TWI Status Register. Mask prescaler bits. + twst = TW_STATUS & 0xF8; + if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1; + + return 0; + +}/* i2c_start */ + + +/************************************************************************* + Issues a start condition and sends address and transfer direction. + If device is busy, use ack polling to wait until device is ready + + Input: address and transfer direction of I2C device +*************************************************************************/ +void i2c_start_wait(unsigned char address) +{ + uint8_t twst; + + + while ( 1 ) + { + // send START condition + TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); + + // wait until transmission completed + while(!(TWCR & (1<<TWINT))); + + // check value of TWI Status Register. Mask prescaler bits. + twst = TW_STATUS & 0xF8; + if ( (twst != TW_START) && (twst != TW_REP_START)) continue; + + // send device address + TWDR = address; + TWCR = (1<<TWINT) | (1<<TWEN); + + // wail until transmission completed + while(!(TWCR & (1<<TWINT))); + + // check value of TWI Status Register. Mask prescaler bits. + twst = TW_STATUS & 0xF8; + if ( (twst == TW_MT_SLA_NACK )||(twst ==TW_MR_DATA_NACK) ) + { + /* device busy, send stop condition to terminate write operation */ + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); + + // wait until stop condition is executed and bus released + while(TWCR & (1<<TWSTO)); + + continue; + } + //if( twst != TW_MT_SLA_ACK) return 1; + break; + } + +}/* i2c_start_wait */ + + +/************************************************************************* + Issues a repeated start condition and sends address and transfer direction + + Input: address and transfer direction of I2C device + + Return: 0 device accessible + 1 failed to access device +*************************************************************************/ +unsigned char i2c_rep_start(unsigned char address) +{ + return i2c_start( address ); + +}/* i2c_rep_start */ + + +/************************************************************************* + Terminates the data transfer and releases the I2C bus +*************************************************************************/ +void i2c_stop(void) +{ + /* send stop condition */ + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); + + // wait until stop condition is executed and bus released + while(TWCR & (1<<TWSTO)); + +}/* i2c_stop */ + + +/************************************************************************* + Send one byte to I2C device + + Input: byte to be transfered + Return: 0 write successful + 1 write failed +*************************************************************************/ +unsigned char i2c_write( unsigned char data ) +{ + uint8_t twst; + + // send data to the previously addressed device + TWDR = data; + TWCR = (1<<TWINT) | (1<<TWEN); + + // wait until transmission completed + while(!(TWCR & (1<<TWINT))); + + // check value of TWI Status Register. Mask prescaler bits + twst = TW_STATUS & 0xF8; + if( twst != TW_MT_DATA_ACK) return 1; + return 0; + +}/* i2c_write */ + + +/************************************************************************* + Read one byte from the I2C device, request more data from device + + Return: byte read from I2C device +*************************************************************************/ +unsigned char i2c_readAck(void) +{ + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA); + while(!(TWCR & (1<<TWINT))); + + return TWDR; + +}/* i2c_readAck */ + + +/************************************************************************* + Read one byte from the I2C device, read is followed by a stop condition + + Return: byte read from I2C device +*************************************************************************/ +unsigned char i2c_readNak(void) +{ + TWCR = (1<<TWINT) | (1<<TWEN); + while(!(TWCR & (1<<TWINT))); + + return TWDR; + +}/* i2c_readNak */ diff --git a/keyboards/ktec/staryu/backlight_staryu.h b/keyboards/ktec/staryu/backlight_staryu.h new file mode 100644 index 0000000000..b90350e28b --- /dev/null +++ b/keyboards/ktec/staryu/backlight_staryu.h @@ -0,0 +1,30 @@ +/* +Copyright 2019 + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#pragma once + +// Add backwards compatibility for existing keymaps +static inline void backlight_set_value(uint8_t index, uint8_t level) { + static const uint8_t backlight_pins[BACKLIGHT_LED_COUNT] = BACKLIGHT_PINS; + if (level) { + setPinOutput(backlight_pins[index]); + } else { + setPinInput(backlight_pins[index]); + } +} + +#define backlight_led_off(i) backlight_set_value(i, 0) +#define backlight_led_on(i) backlight_set_value(i, 1) diff --git a/keyboards/ktec/staryu/config.h b/keyboards/ktec/staryu/config.h new file mode 100755 index 0000000000..db48e0ea5e --- /dev/null +++ b/keyboards/ktec/staryu/config.h @@ -0,0 +1,73 @@ +/* +Copyright 2018 Cole Markham + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x1209 +#define PRODUCT_ID 0x2328 +#define DEVICE_VER 0x0205 +#define MANUFACTURER K.T.E.C. +#define PRODUCT Staryu + +/* key matrix size */ +#define MATRIX_ROWS 2 +#define MATRIX_COLS 3 + +/* key matrix pins */ +#define DIRECT_PINS { \ + { NO_PIN, D0, D1 }, \ + { D4, D3, D2 }, \ +} +#define UNUSED_PINS + +#define RGB_DI_PIN C6 +#define RGBLED_NUM 1 // Number of LEDs +#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_LIMIT_VAL 200 +// #ifdef RGB_DI_PIN +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// #endif + +#undef BACKLIGHT_PIN +#define BACKLIGHT_PINS { C2, C7, D5, D6, B0 } +#define BACKLIGHT_LED_COUNT 5 +#define BACKLIGHT_LEVELS 10 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 1 diff --git a/keyboards/ktec/staryu/info.json b/keyboards/ktec/staryu/info.json new file mode 100644 index 0000000000..baac7dfc29 --- /dev/null +++ b/keyboards/ktec/staryu/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "staryu", + "url": "", + "maintainer": "qmk", + "width": 3, + "height": 2, + "layouts": { + "LAYOUT": { + "layout": [{"x":1, "y":0}, {"x":2, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}] + } + } +} diff --git a/keyboards/ktec/staryu/keymaps/default/README.md b/keyboards/ktec/staryu/keymaps/default/README.md new file mode 100644 index 0000000000..836d3ab4dc --- /dev/null +++ b/keyboards/ktec/staryu/keymaps/default/README.md @@ -0,0 +1,3 @@ +# Default keymap + +Default keymap for the Staryu macropad, adapted from [kairyu's repo](https://github.com/kairyu/tmk_keyboard_custom/blob/master/keyboard/staryu/keymap_default.c). diff --git a/keyboards/ktec/staryu/keymaps/default/keymap.c b/keyboards/ktec/staryu/keymaps/default/keymap.c new file mode 100755 index 0000000000..c41c436f9d --- /dev/null +++ b/keyboards/ktec/staryu/keymaps/default/keymap.c @@ -0,0 +1,104 @@ +/* +Copyright 2018 Kenneth Aloysius + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include QMK_KEYBOARD_H + +enum layers { + _LAYER0, + _LAYER1, + _LAYER2, + _LAYER3, + _LAYER4 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_LAYER0] = LAYOUT( +/* ┌─────────┬─────────┬─────────┐ */ + KC_UP, TO(_LAYER1), +/* ├─────────┼─────────┼─────────┤ */ + KC_LEFT, KC_DOWN, KC_RIGHT +/* └─────────┴─────────┴─────────┘ */ + ), + + [_LAYER1] = LAYOUT( +/* ┌─────────┬─────────┬─────────┐ */ + KC_PGUP, TO(_LAYER2), +/* ├─────────┼─────────┼─────────┤ */ + KC_HOME, KC_PGDN, KC_END +/* └─────────┴─────────┴─────────┘ */ + ), + + [_LAYER2] = LAYOUT( +/* ┌─────────┬─────────┬─────────┐ */ + KC_MSEL, TO(_LAYER3), +/* ├─────────┼─────────┼─────────┤ */ + KC_MPRV, KC_MPLY, KC_MNXT +/* └─────────┴─────────┴─────────┘ */ + ), + + [_LAYER3] = LAYOUT( +/* ┌─────────┬─────────┬─────────┐ */ + KC_MS_U, TO(_LAYER4), +/* ├─────────┼─────────┼─────────┤ */ + KC_MS_L, KC_MS_D, KC_MS_R +/* └─────────┴─────────┴─────────┘ */ + ), + + [_LAYER4] = LAYOUT( +/* ┌─────────┬─────────┬─────────┐ */ + XXXXXXX, TO(_LAYER0), +/* ├─────────┼─────────┼─────────┤ */ + RGB_TOG, BL_TOGG, BL_STEP +/* └─────────┴─────────┴─────────┘ */ + ), + +}; + +void eeconfig_init_user(void) { + // use the non noeeprom versions, to write these values to EEPROM too + rgblight_enable(); + rgblight_mode(RGBLIGHT_MODE_BREATHING+1); + + backlight_enable(); +} + +void keyboard_post_init_user(void) { + //layer_state_set_user is not called for inital state - set it here + rgblight_sethsv_noeeprom_white(); +} + +layer_state_t layer_state_set_user(layer_state_t state) { + switch (get_highest_layer(state)) { + case _LAYER1: + rgblight_sethsv_noeeprom_cyan(); + break; + case _LAYER2: + rgblight_sethsv_noeeprom_magenta(); + break; + case _LAYER3: + rgblight_sethsv_noeeprom_red(); + break; + case _LAYER4: + rgblight_sethsv_noeeprom_orange(); + break; + case _LAYER0: + default: // for any other layers, or the default layer + rgblight_sethsv_noeeprom_white(); + break; + } + return state; +} diff --git a/keyboards/ktec/staryu/keymaps/default/rules.mk b/keyboards/ktec/staryu/keymaps/default/rules.mk new file mode 100644 index 0000000000..6c605daecf --- /dev/null +++ b/keyboards/ktec/staryu/keymaps/default/rules.mk @@ -0,0 +1 @@ +MOUSEKEY_ENABLE = yes diff --git a/keyboards/ktec/staryu/keymaps/krusli/README.md b/keyboards/ktec/staryu/keymaps/krusli/README.md new file mode 100644 index 0000000000..66a0979070 --- /dev/null +++ b/keyboards/ktec/staryu/keymaps/krusli/README.md @@ -0,0 +1,9 @@ +# krusli's RAMA M6-A Layout + +Personal keymap for the RAMA M6-A. + +Top-right button acts as a "toggle between layers" button. Layer 0 -> Layer 1 -> Layer 2 -> Layer 0 -> ... + +- Layer 0: Osu! gamepad layer +- Layer 1: Git commands +- Layer 2 and 3: RGB controls diff --git a/keyboards/ktec/staryu/keymaps/krusli/keymap.c b/keyboards/ktec/staryu/keymaps/krusli/keymap.c new file mode 100644 index 0000000000..9cd1cf829f --- /dev/null +++ b/keyboards/ktec/staryu/keymaps/krusli/keymap.c @@ -0,0 +1,84 @@ +/* +Copyright 2018 Kenneth Aloysius + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include QMK_KEYBOARD_H +#include "action_layer.h" + +#include "../../backlight_staryu.h" + +enum layers { + _LAYER0, + _LAYER1, + _LAYER2, + _LAYER3 +}; + +enum custom_keycodes { + GIT_ADD = SAFE_RANGE, + GIT_COMMIT, + GIT_PUSH, + MUTE, + DEAFEN +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { + switch(keycode) { + case GIT_ADD: + SEND_STRING("git add ."SS_TAP(X_ENTER)); + break; + case GIT_COMMIT: + SEND_STRING("git commit -m "SS_DOWN(X_LSHIFT)SS_TAP(X_QUOTE)SS_UP(X_LSHIFT)); + break; + case GIT_PUSH: + SEND_STRING("git push"SS_TAP(X_ENTER)); + break; + case MUTE: + SEND_STRING(SS_LGUI(SS_LSFT("M"))); + break; + case DEAFEN: + SEND_STRING(SS_LGUI(SS_LSFT("D"))); + break; + return false; + } + } + return true; +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_LAYER0] = LAYOUT( \ + KC_ESC, TO(_LAYER1), \ + KC_Z, KC_X, KC_ENT \ + ), + [_LAYER1] = LAYOUT( \ + MUTE, TO(_LAYER2), \ + GIT_ADD, GIT_COMMIT, GIT_PUSH \ + ), + [_LAYER2] = LAYOUT( \ + RGB_MOD, TO(_LAYER3), \ + RGB_TOG, RGB_HUD, RGB_HUI \ + ), + [_LAYER3] = LAYOUT( \ + RGB_VAI, TO(_LAYER0), \ + RGB_SAD, RGB_VAD, RGB_SAI \ + ) +}; + +void matrix_init_user(void) { + for (int i=0; i<5; i++) { + backlight_led_on(i); + } +} diff --git a/keyboards/ktec/staryu/readme.md b/keyboards/ktec/staryu/readme.md new file mode 100644 index 0000000000..1b2f9e8f53 --- /dev/null +++ b/keyboards/ktec/staryu/readme.md @@ -0,0 +1,15 @@ +# Staryu + + + +A 5 key macropad, designed by Kai and sold by KPRepublic. + +Keyboard Maintainer: QMK Community +Hardware Supported: Staryu (only the non-lite version has been tested) +Hardware Availability: [AliExpress](https://www.aliexpress.com/item/Staryu-Mini-Macro-Pad-custom-keyboard-by-tkg-kai-Mini-macro-pad-mechanical-keyboard-5-keys/32817560746.html) + +Make example for this keyboard (after setting up your build environment): + + make staryu:default + +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/ktec/staryu/rules.mk b/keyboards/ktec/staryu/rules.mk new file mode 100755 index 0000000000..697a58ff7b --- /dev/null +++ b/keyboards/ktec/staryu/rules.mk @@ -0,0 +1,30 @@ +# MCU name +MCU = atmega32u2 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = lufa-dfu + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/ktec/staryu/staryu.c b/keyboards/ktec/staryu/staryu.c new file mode 100755 index 0000000000..4adadf2015 --- /dev/null +++ b/keyboards/ktec/staryu/staryu.c @@ -0,0 +1,17 @@ +/* +Copyright 2018 Cole Markham + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include "staryu.h" diff --git a/keyboards/ktec/staryu/staryu.h b/keyboards/ktec/staryu/staryu.h new file mode 100755 index 0000000000..bdce5806f7 --- /dev/null +++ b/keyboards/ktec/staryu/staryu.h @@ -0,0 +1,28 @@ +/* +Copyright 2018 Cole Markham + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#pragma once + +#include "quantum.h" +#define ___ KC_NO + +#define LAYOUT( \ + K01, K02, \ + K10, K11, K12 \ +) { \ + { ___, K01, K02 }, \ + { K10, K11, K12 } \ +} |