3 files changed, 2 insertions, 42 deletions
diff --git a/keyboards/kona_classic/config.h b/keyboards/kona_classic/config.h
index 3023a656a4..4b0c193cc1 100644
--- a/keyboards/kona_classic/config.h
+++ b/keyboards/kona_classic/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 16
 
 // ROWS: Top to bottom, COLS: Left to right
 /* Row pin configuration
@@ -34,10 +29,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION ROW2COL
 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
 /* Underlight configuration
  */
 #define RGB_DI_PIN B2
@@ -56,39 +47,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_SAT_STEP 10
 #define RGBLIGHT_VAL_STEP 10
 
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/kona_classic/info.json b/keyboards/kona_classic/info.json
index 2b64911bcb..6a6f996d90 100644
--- a/keyboards/kona_classic/info.json
+++ b/keyboards/kona_classic/info.json
@@ -8,6 +8,8 @@
     "pid": "0x6060",
     "device_version": "0.0.3"
   },
+  "processor": "atmega32u4",
+  "bootloader": "halfkay",
   "layouts": {
     "LAYOUT_all": {
       "layout": [{"label":"KA0", "x":0, "y":0}, {"label":"KA1", "x":1, "y":0}, {"label":"K00", "x":2.25, "y":0}, {"label":"K01", "x":3.25, "y":0}, {"label":"K02", "x":4.25, "y":0}, {"label":"K03", "x":5.25, "y":0}, {"label":"K04", "x":6.25, "y":0}, {"label":"K05", "x":7.25, "y":0}, {"label":"K06", "x":8.25, "y":0}, {"label":"K07", "x":9.25, "y":0}, {"label":"K08", "x":10.25, "y":0}, {"label":"K09", "x":11.25, "y":0}, {"label":"K0A", "x":12.25, "y":0}, {"label":"K0B", "x":13.25, "y":0}, {"label":"K0C", "x":14.25, "y":0}, {"label":"K0D", "x":15.25, "y":0, "w":2}, {"label":"KA2", "x":0, "y":1}, {"label":"KA3", "x":1, "y":1}, {"label":"K10", "x":2.25, "y":1, "w":1.5}, {"label":"K11", "x":3.75, "y":1}, {"label":"K12", "x":4.75, "y":1}, {"label":"K13", "x":5.75, "y":1}, {"label":"K14", "x":6.75, "y":1}, {"label":"K15", "x":7.75, "y":1}, {"label":"K16", "x":8.75, "y":1}, {"label":"K17", "x":9.75, "y":1}, {"label":"K18", "x":10.75, "y":1}, {"label":"K19", "x":11.75, "y":1}, {"label":"K1A", "x":12.75, "y":1}, {"label":"K1B", "x":13.75, "y":1}, {"label":"K1C", "x":14.75, "y":1}, {"label":"K1D", "x":15.75, "y":1, "w":1.5}, {"label":"KA4", "x":0, "y":2}, {"label":"KA5", "x":1, "y":2}, {"label":"K20", "x":2.25, "y":2, "w":1.75}, {"label":"K21", "x":4, "y":2}, {"label":"K22", "x":5, "y":2}, {"label":"K23", "x":6, "y":2}, {"label":"K24", "x":7, "y":2}, {"label":"K25", "x":8, "y":2}, {"label":"K26", "x":9, "y":2}, {"label":"K27", "x":10, "y":2}, {"label":"K28", "x":11, "y":2}, {"label":"K29", "x":12, "y":2}, {"label":"K2A", "x":13, "y":2}, {"label":"K2B", "x":14, "y":2}, {"label":"K2C", "x":15, "y":2, "w":2.25}, {"label":"KA6", "x":0, "y":3}, {"label":"KA7", "x":1, "y":3}, {"label":"K30", "x":2.25, "y":3, "w":1.25}, {"label":"K31", "x":3.5, "y":3}, {"label":"K32", "x":4.5, "y":3}, {"label":"K33", "x":5.5, "y":3}, {"label":"K34", "x":6.5, "y":3}, {"label":"K35", "x":7.5, "y":3}, {"label":"K36", "x":8.5, "y":3}, {"label":"K37", "x":9.5, "y":3}, {"label":"K38", "x":10.5, "y":3}, {"label":"K39", "x":11.5, "y":3}, {"label":"K3A", "x":12.5, "y":3}, {"label":"K3B", "x":13.5, "y":3}, {"label":"K3C", "x":15.25, "y":3}, {"label":"K3D", "x":16.25, "y":3}, {"label":"KA8", "x":0, "y":4}, {"label":"KA9", "x":1, "y":4}, {"label":"K40", "x":2.25, "y":4, "w":1.25}, {"label":"K41", "x":3.5, "y":4, "w":1.25}, {"label":"K42", "x":4.75, "y":4, "w":1.25}, {"label":"K44", "x":6, "y":4, "w":2.25}, {"label":"K46", "x":8.25, "y":4, "w":1.25}, {"label":"K47", "x":9.5, "y":4, "w":2.75}, {"label":"K49", "x":12.25, "y":4}, {"label":"K4A", "x":13.25, "y":4}, {"label":"K4B", "x":14.25, "y":4}, {"label":"K4C", "x":15.25, "y":4}, {"label":"K4D", "x":16.25, "y":4}]
diff --git a/keyboards/kona_classic/rules.mk b/keyboards/kona_classic/rules.mk
index 9b2c210d42..b6e2a5f9a4 100644
--- a/keyboards/kona_classic/rules.mk
+++ b/keyboards/kona_classic/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = halfkay
-
 # Build Options
 #   change yes to no to disable
 #