diff options
Diffstat (limited to 'keyboards/kinesis/kint41/config.h')
| -rw-r--r-- | keyboards/kinesis/kint41/config.h | 50 |
1 files changed, 0 insertions, 50 deletions
diff --git a/keyboards/kinesis/kint41/config.h b/keyboards/kinesis/kint41/config.h index 8f29bdc498..e620abd09e 100644 --- a/keyboards/kinesis/kint41/config.h +++ b/keyboards/kinesis/kint41/config.h @@ -16,56 +16,6 @@ #pragma once -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS \ - { \ - LINE_PIN8, /* ROW_EQL */ \ - LINE_PIN9, /* ROW_1 */ \ - LINE_PIN10, /* ROW_2 */ \ - LINE_PIN11, /* ROW_3 */ \ - LINE_PIN7, /* ROW_4 */ \ - LINE_PIN16, /* ROW_5 */ \ - LINE_PIN5, /* ROW_6 */ \ - LINE_PIN3, /* ROW_7 */ \ - LINE_PIN4, /* ROW_8 */ \ - LINE_PIN1, /* ROW_9 */ \ - LINE_PIN0, /* ROW_0 */ \ - LINE_PIN2, /* ROW_MIN */ \ - LINE_PIN17, /* ROW_ESC */ \ - LINE_PIN23, /* ROW_F1 */ \ - LINE_PIN21 /* ROW_F2 */ \ - } - -#define MATRIX_COL_PINS \ - { \ - LINE_PIN18, /* COL_0 */ \ - LINE_PIN14, /* COL_1 */ \ - LINE_PIN15, /* COL_2 */ \ - LINE_PIN20, /* COL_3 */ \ - LINE_PIN22, /* COL_4 */ \ - LINE_PIN19, /* COL_5 */ \ - LINE_PIN6 /* COL_6 */ \ - } - - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -#define IGNORE_MOD_TAP_INTERRUPT - -// The Teensy 4.1 consumes about 100 mA of current at its full speed of 600 MHz -// as per https://www.pjrc.com/store/teensy41.html -#define USB_MAX_POWER_CONSUMPTION 100 - /* We use the i.MX RT1060 high-speed GPIOs (GPIO6-9) which are connected to the * AHB bus (AHB_CLK_ROOT), which runs at the same speed as the ARM Core Clock, * i.e. 600 MHz. See MIMXRT1062, page 949, 12.1 Chip-specific GPIO information. |