diff options
Diffstat (limited to 'keyboards/keychron')
61 files changed, 210 insertions, 121 deletions
diff --git a/keyboards/keychron/q0/config.h b/keyboards/keychron/q0/config.h index 28e942da07..616f5494e7 100644 --- a/keyboards/keychron/q0/config.h +++ b/keyboards/keychron/q0/config.h @@ -16,9 +16,6 @@ #pragma once -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - #define CKLED2001_CURRENT_TUNE { 0xFF, 0xFF, 0x70, 0xFF, 0xFF, 0x70, 0xFF, 0xFF, 0x70, 0xFF, 0xFF, 0x70 } /* NKRO */ diff --git a/keyboards/keychron/q0/rev_0130/config.h b/keyboards/keychron/q0/rev_0130/config.h index 80a2e150af..9a5d3bc372 100644 --- a/keyboards/keychron/q0/rev_0130/config.h +++ b/keyboards/keychron/q0/rev_0130/config.h @@ -16,10 +16,6 @@ #pragma once -/* key matrix pins */ -#define MATRIX_ROW_PINS { B5, B4, B3, A15, A14, A13 } -#define MATRIX_COL_PINS { A5, A6, A7, B0 } - /* RGB Matrix Driver Configuration */ #define DRIVER_COUNT 1 #define DRIVER_ADDR_1 0b1110100 diff --git a/keyboards/keychron/q0/rev_0130/info.json b/keyboards/keychron/q0/rev_0130/info.json index 334f879d3b..acfd07e390 100644 --- a/keyboards/keychron/q0/rev_0130/info.json +++ b/keyboards/keychron/q0/rev_0130/info.json @@ -8,6 +8,11 @@ "pid": "0x0130", "device_version": "1.0.2" }, + "matrix_pins": { + "cols": ["A5", "A6", "A7", "B0"], + "rows": ["B5", "B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/q0/rev_0131/config.h b/keyboards/keychron/q0/rev_0131/config.h index f94517ebb4..e4c5c2d3fc 100644 --- a/keyboards/keychron/q0/rev_0131/config.h +++ b/keyboards/keychron/q0/rev_0131/config.h @@ -16,10 +16,6 @@ #pragma once -/* key matrix pins */ -#define MATRIX_ROW_PINS { B5, B4, B3, A15, A14, A13 } -#define MATRIX_COL_PINS { C14, C15, A0, A1, A2 } - /* RGB Matrix Driver Configuration */ #define DRIVER_COUNT 1 #define DRIVER_ADDR_1 0b1110111 diff --git a/keyboards/keychron/q0/rev_0131/info.json b/keyboards/keychron/q0/rev_0131/info.json index 94808bd9c4..d447502cba 100644 --- a/keyboards/keychron/q0/rev_0131/info.json +++ b/keyboards/keychron/q0/rev_0131/info.json @@ -8,6 +8,11 @@ "pid": "0x0131", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2"], + "rows": ["B5", "B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "encoder": { "rotary": [ {"pin_a": "A3", "pin_b": "A4"} diff --git a/keyboards/keychron/q1/ansi/config.h b/keyboards/keychron/q1/ansi/config.h index 0a30f7d82d..c6d4e44c87 100644 --- a/keyboards/keychron/q1/ansi/config.h +++ b/keyboards/keychron/q1/ansi/config.h @@ -16,10 +16,6 @@ #pragma once -/* key matrix pins */ -#define MATRIX_ROW_PINS { D3, D2, B3, B2, B1, B0 } -#define MATRIX_COL_PINS { D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, F5, F4, F1, F0 } - /* RGB Matrix Configuration */ #define DRIVER_1_LED_TOTAL 59 #define DRIVER_2_LED_TOTAL 23 diff --git a/keyboards/keychron/q1/ansi/info.json b/keyboards/keychron/q1/ansi/info.json index 63602d71c5..c878317063 100644 --- a/keyboards/keychron/q1/ansi/info.json +++ b/keyboards/keychron/q1/ansi/info.json @@ -8,6 +8,11 @@ "pid": "0x0100", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7", "F6", "F5", "F4", "F1", "F0"], + "rows": ["D3", "D2", "B3", "B2", "B1", "B0"] + }, + "diode_direction": "ROW2COL", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/keychron/q1/ansi_encoder/config.h b/keyboards/keychron/q1/ansi_encoder/config.h index a41976d560..28bbea9087 100644 --- a/keyboards/keychron/q1/ansi_encoder/config.h +++ b/keyboards/keychron/q1/ansi_encoder/config.h @@ -16,10 +16,6 @@ #pragma once -/* key matrix pins */ -#define MATRIX_ROW_PINS { D3, D2, B3, B2, B1, B0 } -#define MATRIX_COL_PINS { D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, F5, F4, F1, F0 } - /* RGB Matrix Configuration */ #define DRIVER_1_LED_TOTAL 59 #define DRIVER_2_LED_TOTAL 23 diff --git a/keyboards/keychron/q1/ansi_encoder/info.json b/keyboards/keychron/q1/ansi_encoder/info.json index 2391e674ad..9b1f1ba014 100644 --- a/keyboards/keychron/q1/ansi_encoder/info.json +++ b/keyboards/keychron/q1/ansi_encoder/info.json @@ -8,6 +8,11 @@ "pid": "0x0101", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7", "F6", "F5", "F4", "F1", "F0"], + "rows": ["D3", "D2", "B3", "B2", "B1", "B0"] + }, + "diode_direction": "ROW2COL", "encoder": { "rotary": [ {"pin_a": "E6", "pin_b": "B7"} diff --git a/keyboards/keychron/q1/config.h b/keyboards/keychron/q1/config.h index a49ec41a06..a87754e9f2 100644 --- a/keyboards/keychron/q1/config.h +++ b/keyboards/keychron/q1/config.h @@ -16,9 +16,6 @@ #pragma once -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - /* RGB Matrix Driver Configuration */ #define DRIVER_COUNT 2 #define DRIVER_ADDR_1 0b1010000 diff --git a/keyboards/keychron/q1/iso/config.h b/keyboards/keychron/q1/iso/config.h index b9b33cf320..cb7b05560a 100644 --- a/keyboards/keychron/q1/iso/config.h +++ b/keyboards/keychron/q1/iso/config.h @@ -16,10 +16,6 @@ #pragma once -/* key matrix pins */ -#define MATRIX_ROW_PINS { D3, D2, B3, B2, B1, B0 } -#define MATRIX_COL_PINS { D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, F5, F4, F1, F0 } - /* RGB Matrix Configuration */ #define DRIVER_1_LED_TOTAL 59 #define DRIVER_2_LED_TOTAL 24 diff --git a/keyboards/keychron/q1/iso/info.json b/keyboards/keychron/q1/iso/info.json index d8f5205f5f..447a246471 100644 --- a/keyboards/keychron/q1/iso/info.json +++ b/keyboards/keychron/q1/iso/info.json @@ -8,6 +8,11 @@ "pid": "0x0102", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7", "F6", "F5", "F4", "F1", "F0"], + "rows": ["D3", "D2", "B3", "B2", "B1", "B0"] + }, + "diode_direction": "ROW2COL", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/keychron/q1/iso_encoder/config.h b/keyboards/keychron/q1/iso_encoder/config.h index b52fb88383..c1e84e44d3 100644 --- a/keyboards/keychron/q1/iso_encoder/config.h +++ b/keyboards/keychron/q1/iso_encoder/config.h @@ -16,10 +16,6 @@ #pragma once -/* key matrix pins */ -#define MATRIX_ROW_PINS { D3, D2, B3, B2, B1, B0 } -#define MATRIX_COL_PINS { D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, F5, F4, F1, F0 } - /* DIP switch */ #define DIP_SWITCH_MATRIX_GRID { {0,1} } diff --git a/keyboards/keychron/q1/iso_encoder/info.json b/keyboards/keychron/q1/iso_encoder/info.json index e4dce374c8..ceee988875 100644 --- a/keyboards/keychron/q1/iso_encoder/info.json +++ b/keyboards/keychron/q1/iso_encoder/info.json @@ -8,6 +8,11 @@ "pid": "0x0103", "device_version": "1.0.2" }, + "matrix_pins": { + "cols": ["D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7", "F6", "F5", "F4", "F1", "F0"], + "rows": ["D3", "D2", "B3", "B2", "B1", "B0"] + }, + "diode_direction": "ROW2COL", "encoder": { "rotary": [ {"pin_a": "E6", "pin_b": "B7"} diff --git a/keyboards/keychron/q2/ansi/info.json b/keyboards/keychron/q2/ansi/info.json index 054786185a..eac3fc529c 100644 --- a/keyboards/keychron/q2/ansi/info.json +++ b/keyboards/keychron/q2/ansi/info.json @@ -8,6 +8,11 @@ "pid": "0x0110", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/q2/ansi_encoder/info.json b/keyboards/keychron/q2/ansi_encoder/info.json index a2a12dc39c..e0f7c6cebd 100644 --- a/keyboards/keychron/q2/ansi_encoder/info.json +++ b/keyboards/keychron/q2/ansi_encoder/info.json @@ -8,6 +8,11 @@ "pid": "0x0111", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "encoder": { "rotary": [ {"pin_a": "A10", "pin_b": "B5"} diff --git a/keyboards/keychron/q2/config.h b/keyboards/keychron/q2/config.h index e421906a68..63e31cd01d 100644 --- a/keyboards/keychron/q2/config.h +++ b/keyboards/keychron/q2/config.h @@ -16,18 +16,11 @@ #pragma once -/* key matrix pins */ -#define MATRIX_ROW_PINS { B4, B3, A15, A14, A13 } -#define MATRIX_COL_PINS { C14, C15, A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, A8, A9, H3 } - #define MATRIX_UNSELECT_DRIVE_HIGH /* DIP switch */ #define DIP_SWITCH_MATRIX_GRID { {4, 4} } -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - /* RGB Matrix Driver Configuration */ #define DRIVER_COUNT 2 #define DRIVER_ADDR_1 0b1110111 diff --git a/keyboards/keychron/q2/iso/info.json b/keyboards/keychron/q2/iso/info.json index e295fcef18..afc1079ae1 100644 --- a/keyboards/keychron/q2/iso/info.json +++ b/keyboards/keychron/q2/iso/info.json @@ -8,6 +8,11 @@ "pid": "0x0112", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/q2/iso_encoder/info.json b/keyboards/keychron/q2/iso_encoder/info.json index 028522c259..249813f517 100644 --- a/keyboards/keychron/q2/iso_encoder/info.json +++ b/keyboards/keychron/q2/iso_encoder/info.json @@ -8,6 +8,11 @@ "pid": "0x0113", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "encoder": { "rotary": [ {"pin_a": "A10", "pin_b": "B5"} diff --git a/keyboards/keychron/q2/jis/info.json b/keyboards/keychron/q2/jis/info.json index d41bf49cb2..f36cda421f 100644 --- a/keyboards/keychron/q2/jis/info.json +++ b/keyboards/keychron/q2/jis/info.json @@ -8,6 +8,11 @@ "pid": "0x0114", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/q2/jis_encoder/info.json b/keyboards/keychron/q2/jis_encoder/info.json index 18e800703b..9e217dddea 100644 --- a/keyboards/keychron/q2/jis_encoder/info.json +++ b/keyboards/keychron/q2/jis_encoder/info.json @@ -8,6 +8,11 @@ "pid": "0x0115", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "encoder": { "rotary": [ {"pin_a": "A10", "pin_b": "B5"} diff --git a/keyboards/keychron/q4/ansi_v1/info.json b/keyboards/keychron/q4/ansi_v1/info.json index f24a4acba5..cb0fc55e3f 100644 --- a/keyboards/keychron/q4/ansi_v1/info.json +++ b/keyboards/keychron/q4/ansi_v1/info.json @@ -8,6 +8,11 @@ "pid": "0x0140", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/q4/ansi_v2/info.json b/keyboards/keychron/q4/ansi_v2/info.json index f24a4acba5..cb0fc55e3f 100644 --- a/keyboards/keychron/q4/ansi_v2/info.json +++ b/keyboards/keychron/q4/ansi_v2/info.json @@ -8,6 +8,11 @@ "pid": "0x0140", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/q4/config.h b/keyboards/keychron/q4/config.h index 08549247f3..940ee44e77 100644 --- a/keyboards/keychron/q4/config.h +++ b/keyboards/keychron/q4/config.h @@ -16,13 +16,6 @@ #pragma once -/* key matrix pins */ -#define MATRIX_ROW_PINS { B4, B3, A15, A14, A13 } -#define MATRIX_COL_PINS { C14, C15, A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, A8, A9 } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - /* DIP switch */ #define DIP_SWITCH_MATRIX_GRID { {4,4} } diff --git a/keyboards/keychron/q4/iso/info.json b/keyboards/keychron/q4/iso/info.json index 9c65fa29d1..908c5bdae1 100644 --- a/keyboards/keychron/q4/iso/info.json +++ b/keyboards/keychron/q4/iso/info.json @@ -8,6 +8,11 @@ "pid": "0x0142", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/q60/ansi/info.json b/keyboards/keychron/q60/ansi/info.json index c64de7b5e2..cf4e86f8aa 100644 --- a/keyboards/keychron/q60/ansi/info.json +++ b/keyboards/keychron/q60/ansi/info.json @@ -8,6 +8,11 @@ "pid": "0x01C0", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/q60/config.h b/keyboards/keychron/q60/config.h index bd192cd8bd..779feea4ce 100644 --- a/keyboards/keychron/q60/config.h +++ b/keyboards/keychron/q60/config.h @@ -16,15 +16,6 @@ #pragma once -/* key matrix pins */ -#define MATRIX_ROW_PINS \ - { B4, B3, A15, A14, A13 } -#define MATRIX_COL_PINS \ - { C14, C15, A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, A8, A9 } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - /* RGB Matrix Driver Configuration */ #define DRIVER_COUNT 1 #define DRIVER_ADDR_1 0b1110100 diff --git a/keyboards/keychron/q7/ansi/info.json b/keyboards/keychron/q7/ansi/info.json index dbbc462a6d..00240fd6a3 100644 --- a/keyboards/keychron/q7/ansi/info.json +++ b/keyboards/keychron/q7/ansi/info.json @@ -8,6 +8,11 @@ "pid": "0x0170", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "A10", "B5"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/q7/config.h b/keyboards/keychron/q7/config.h index f0a545bd98..0ea9ee5f46 100644 --- a/keyboards/keychron/q7/config.h +++ b/keyboards/keychron/q7/config.h @@ -16,13 +16,6 @@ #pragma once -/* key matrix pins */ -#define MATRIX_ROW_PINS { B4, B3, A15, A14, A13 } -#define MATRIX_COL_PINS { C14, C15, A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, A8, A9, A10, B5 } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - /* RGB Matrix Driver Configuration */ #define DRIVER_COUNT 2 #define DRIVER_ADDR_1 0b1110111 diff --git a/keyboards/keychron/q7/iso/info.json b/keyboards/keychron/q7/iso/info.json index 876412d7b6..b060b570b9 100644 --- a/keyboards/keychron/q7/iso/info.json +++ b/keyboards/keychron/q7/iso/info.json @@ -8,6 +8,11 @@ "pid": "0x0172", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "A10", "B5"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/q8/ansi/info.json b/keyboards/keychron/q8/ansi/info.json index b80cb42432..96efa35d26 100644 --- a/keyboards/keychron/q8/ansi/info.json +++ b/keyboards/keychron/q8/ansi/info.json @@ -8,6 +8,11 @@ "pid": "0x0180", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/q8/ansi_encoder/info.json b/keyboards/keychron/q8/ansi_encoder/info.json index b75a878198..071a7a25f9 100644 --- a/keyboards/keychron/q8/ansi_encoder/info.json +++ b/keyboards/keychron/q8/ansi_encoder/info.json @@ -8,6 +8,11 @@ "pid": "0x0181", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "encoder": { "rotary": [ {"pin_a": "B5", "pin_b": "A10"} diff --git a/keyboards/keychron/q8/config.h b/keyboards/keychron/q8/config.h index 017f463d84..e0f6c673a5 100644 --- a/keyboards/keychron/q8/config.h +++ b/keyboards/keychron/q8/config.h @@ -16,15 +16,6 @@ #pragma once -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -/* Key matrix pins */ -#define MATRIX_ROW_PINS \ - { B4, B3, A15, A14, A13 } -#define MATRIX_COL_PINS \ - { C14, C15, A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, A8, A9, H3 } - /* If PH3 used with a stronger pull resistor then the following definition needs be included */ // #define MATRIX_UNSELECT_DRIVE_HIGH diff --git a/keyboards/keychron/q8/iso/info.json b/keyboards/keychron/q8/iso/info.json index c5a5b7653e..e716b347a0 100644 --- a/keyboards/keychron/q8/iso/info.json +++ b/keyboards/keychron/q8/iso/info.json @@ -8,6 +8,11 @@ "pid": "0x0182", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/q8/iso_encoder/info.json b/keyboards/keychron/q8/iso_encoder/info.json index 45181452be..f70548f3c4 100644 --- a/keyboards/keychron/q8/iso_encoder/info.json +++ b/keyboards/keychron/q8/iso_encoder/info.json @@ -8,6 +8,11 @@ "pid": "0x0183", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "encoder": { "rotary": [ {"pin_a": "B5", "pin_b": "A10"} diff --git a/keyboards/keychron/q9/ansi/info.json b/keyboards/keychron/q9/ansi/info.json index e1a6ae534d..cd971b155a 100644 --- a/keyboards/keychron/q9/ansi/info.json +++ b/keyboards/keychron/q9/ansi/info.json @@ -8,6 +8,11 @@ "pid": "0x0190", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["A10", "A9", "A8", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2", "A1", "A0", "C15", "C14"], + "rows": ["B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/q9/ansi_encoder/info.json b/keyboards/keychron/q9/ansi_encoder/info.json index 5100c18945..7b4e73eee3 100644 --- a/keyboards/keychron/q9/ansi_encoder/info.json +++ b/keyboards/keychron/q9/ansi_encoder/info.json @@ -8,6 +8,11 @@ "pid": "0x0191", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["A10", "A9", "A8", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2", "A1", "A0", "C15", "C14"], + "rows": ["B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "encoder": { "rotary": [ {"pin_a": "B4", "pin_b": "B5"} diff --git a/keyboards/keychron/q9/config.h b/keyboards/keychron/q9/config.h index e051703d11..742dde3ff2 100644 --- a/keyboards/keychron/q9/config.h +++ b/keyboards/keychron/q9/config.h @@ -16,15 +16,6 @@ #pragma once -/* key matrix pins */ -#define MATRIX_ROW_PINS \ - { B3, A15, A14, A13 } -#define MATRIX_COL_PINS \ - { A10, A9, A8, B1, B0, A7, A6, A5, A4, A3, A2, A1, A0, C15, C14 } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - /* Disable DIP switch in matrix data */ #define MATRIX_MASKED diff --git a/keyboards/keychron/q9/iso/info.json b/keyboards/keychron/q9/iso/info.json index 159abc63ae..7f435a2b7b 100644 --- a/keyboards/keychron/q9/iso/info.json +++ b/keyboards/keychron/q9/iso/info.json @@ -8,6 +8,11 @@ "pid": "0x0192", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["A10", "A9", "A8", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2", "A1", "A0", "C15", "C14"], + "rows": ["B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/q9/iso_encoder/info.json b/keyboards/keychron/q9/iso_encoder/info.json index dee0a8953a..8ecb23b0a3 100644 --- a/keyboards/keychron/q9/iso_encoder/info.json +++ b/keyboards/keychron/q9/iso_encoder/info.json @@ -8,6 +8,11 @@ "pid": "0x0193", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["A10", "A9", "A8", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2", "A1", "A0", "C15", "C14"], + "rows": ["B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "encoder": { "rotary": [ {"pin_a": "B4", "pin_b": "B5"} diff --git a/keyboards/keychron/s1/ansi/rgb/info.json b/keyboards/keychron/s1/ansi/rgb/info.json index 02ea4d4c90..2aabe622d4 100644 --- a/keyboards/keychron/s1/ansi/rgb/info.json +++ b/keyboards/keychron/s1/ansi/rgb/info.json @@ -8,6 +8,11 @@ "pid": "0x0410", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["A10", "A9", "A8", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2", "A1", "A0", "C15", "C14"], + "rows": ["B5", "B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layout_aliases": { diff --git a/keyboards/keychron/s1/ansi/white/info.json b/keyboards/keychron/s1/ansi/white/info.json index a64f5eb0a9..e6c0e4f3d1 100644 --- a/keyboards/keychron/s1/ansi/white/info.json +++ b/keyboards/keychron/s1/ansi/white/info.json @@ -8,6 +8,11 @@ "pid": "0x0411", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["A10", "A9", "A8", "B1", "B0", "A7", "A6", "A5", "A4", "A3", "A2", "A1", "A0", "C15", "C14"], + "rows": ["B5", "B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layout_aliases": { diff --git a/keyboards/keychron/s1/config.h b/keyboards/keychron/s1/config.h index e12cc0479c..8c98389522 100644 --- a/keyboards/keychron/s1/config.h +++ b/keyboards/keychron/s1/config.h @@ -16,15 +16,6 @@ #pragma once -/* key matrix pins */ -#define MATRIX_ROW_PINS \ - { B5, B4, B3, A15, A14, A13 } -#define MATRIX_COL_PINS \ - { A10, A9, A8, B1, B0, A7, A6, A5, A4, A3, A2, A1, A0, C15, C14 } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - /* Disable DIP switch in matrix data */ #define MATRIX_MASKED diff --git a/keyboards/keychron/v2/ansi/info.json b/keyboards/keychron/v2/ansi/info.json index f0bb49cee2..9c8bffb4f1 100644 --- a/keyboards/keychron/v2/ansi/info.json +++ b/keyboards/keychron/v2/ansi/info.json @@ -8,6 +8,11 @@ "pid": "0x0320", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/v2/ansi_encoder/info.json b/keyboards/keychron/v2/ansi_encoder/info.json index 1e729eb636..3a8f9add34 100644 --- a/keyboards/keychron/v2/ansi_encoder/info.json +++ b/keyboards/keychron/v2/ansi_encoder/info.json @@ -8,6 +8,11 @@ "pid": "0x0321", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "encoder": { "rotary": [ {"pin_a": "A10", "pin_b": "B5"} diff --git a/keyboards/keychron/v2/config.h b/keyboards/keychron/v2/config.h index 4cb2721911..08cc5b8e84 100644 --- a/keyboards/keychron/v2/config.h +++ b/keyboards/keychron/v2/config.h @@ -16,15 +16,6 @@ #pragma once -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -/* key matrix pins */ -#define MATRIX_ROW_PINS \ - { B4, B3, A15, A14, A13 } -#define MATRIX_COL_PINS \ - { C14, C15, A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, A8, A9, H3 } - /* If uses PH3 with a stronger pull resistor then the following definition should be included */ // #define MATRIX_UNSELECT_DRIVE_HIGH diff --git a/keyboards/keychron/v2/iso/info.json b/keyboards/keychron/v2/iso/info.json index 0679e1737c..9a79f31149 100644 --- a/keyboards/keychron/v2/iso/info.json +++ b/keyboards/keychron/v2/iso/info.json @@ -8,6 +8,11 @@ "pid": "0x0322", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/v2/iso_encoder/info.json b/keyboards/keychron/v2/iso_encoder/info.json index a784b33ec5..13a232c6da 100644 --- a/keyboards/keychron/v2/iso_encoder/info.json +++ b/keyboards/keychron/v2/iso_encoder/info.json @@ -7,6 +7,11 @@ "pid": "0x0323", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "encoder": { "rotary": [ {"pin_a": "A10", "pin_b": "B5"} diff --git a/keyboards/keychron/v2/jis/info.json b/keyboards/keychron/v2/jis/info.json index 89ec07b072..a727490f8f 100644 --- a/keyboards/keychron/v2/jis/info.json +++ b/keyboards/keychron/v2/jis/info.json @@ -8,6 +8,11 @@ "pid": "0x0324", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/v2/jis_encoder/info.json b/keyboards/keychron/v2/jis_encoder/info.json index abb76636f7..222861041c 100644 --- a/keyboards/keychron/v2/jis_encoder/info.json +++ b/keyboards/keychron/v2/jis_encoder/info.json @@ -8,6 +8,11 @@ "pid": "0x0325", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "encoder": { "rotary": [ {"pin_a": "A10", "pin_b": "B5"} diff --git a/keyboards/keychron/v4/ansi/info.json b/keyboards/keychron/v4/ansi/info.json index 04bd9e4761..372f8d2bf0 100644 --- a/keyboards/keychron/v4/ansi/info.json +++ b/keyboards/keychron/v4/ansi/info.json @@ -8,6 +8,11 @@ "pid": "0x0340", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/v4/config.h b/keyboards/keychron/v4/config.h index eb22d58fb9..8d92219f20 100644 --- a/keyboards/keychron/v4/config.h +++ b/keyboards/keychron/v4/config.h @@ -16,15 +16,6 @@ #pragma once -/* key matrix pins */ -#define MATRIX_ROW_PINS \ - { B4, B3, A15, A14, A13 } -#define MATRIX_COL_PINS \ - { C14, C15, A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, A8, A9 } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - /* RGB Matrix Driver Configuration */ #define DRIVER_COUNT 1 #define DRIVER_ADDR_1 0b1110111 diff --git a/keyboards/keychron/v4/iso/info.json b/keyboards/keychron/v4/iso/info.json index 561fdde3cc..79d23c7853 100644 --- a/keyboards/keychron/v4/iso/info.json +++ b/keyboards/keychron/v4/iso/info.json @@ -8,6 +8,11 @@ "pid": "0x0342", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/v7/ansi/info.json b/keyboards/keychron/v7/ansi/info.json index 00df236f6d..7b3eb8db78 100644 --- a/keyboards/keychron/v7/ansi/info.json +++ b/keyboards/keychron/v7/ansi/info.json @@ -8,6 +8,11 @@ "pid": "0x0370", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "A10", "B5"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/v7/config.h b/keyboards/keychron/v7/config.h index b6a08098ce..c439a7e366 100644 --- a/keyboards/keychron/v7/config.h +++ b/keyboards/keychron/v7/config.h @@ -16,15 +16,6 @@ #pragma once -/* key matrix pins */ -#define MATRIX_ROW_PINS \ - { B4, B3, A15, A14, A13 } -#define MATRIX_COL_PINS \ - { C14, C15, A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, A8, A9, A10, B5 } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - /* RGB Matrix Driver Configuration */ #define DRIVER_COUNT 2 #define DRIVER_ADDR_1 0b1110111 diff --git a/keyboards/keychron/v7/iso/info.json b/keyboards/keychron/v7/iso/info.json index e01b12464c..449ec89487 100644 --- a/keyboards/keychron/v7/iso/info.json +++ b/keyboards/keychron/v7/iso/info.json @@ -8,6 +8,11 @@ "pid": "0x0372", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "A10", "B5"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/v8/ansi/info.json b/keyboards/keychron/v8/ansi/info.json index f1f2e75e4d..6924af28b5 100644 --- a/keyboards/keychron/v8/ansi/info.json +++ b/keyboards/keychron/v8/ansi/info.json @@ -8,6 +8,11 @@ "pid": "0x0380", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/v8/ansi_encoder/info.json b/keyboards/keychron/v8/ansi_encoder/info.json index f6a9de655b..8ff94cedb0 100644 --- a/keyboards/keychron/v8/ansi_encoder/info.json +++ b/keyboards/keychron/v8/ansi_encoder/info.json @@ -8,6 +8,11 @@ "pid": "0x0381", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "encoder": { "rotary": [ {"pin_a": "A10", "pin_b": "B5"} diff --git a/keyboards/keychron/v8/config.h b/keyboards/keychron/v8/config.h index c5a3857f40..7c6076e199 100644 --- a/keyboards/keychron/v8/config.h +++ b/keyboards/keychron/v8/config.h @@ -16,13 +16,6 @@ #pragma once -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -/* Key matrix pins */ -#define MATRIX_ROW_PINS { B4, B3, A15, A14, A13 } -#define MATRIX_COL_PINS { C14, C15, A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, A8, A9, H3 } - /* If uses PH3 with a stronger pull resistor then the following definition should be included */ // #define MATRIX_UNSELECT_DRIVE_HIGH diff --git a/keyboards/keychron/v8/iso/info.json b/keyboards/keychron/v8/iso/info.json index 22b363d072..1cfb662ba2 100644 --- a/keyboards/keychron/v8/iso/info.json +++ b/keyboards/keychron/v8/iso/info.json @@ -8,6 +8,11 @@ "pid": "0x0382", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "processor": "STM32L432", "bootloader": "stm32-dfu", "layouts": { diff --git a/keyboards/keychron/v8/iso_encoder/info.json b/keyboards/keychron/v8/iso_encoder/info.json index 2abaeda111..a70cc2c43b 100644 --- a/keyboards/keychron/v8/iso_encoder/info.json +++ b/keyboards/keychron/v8/iso_encoder/info.json @@ -8,6 +8,11 @@ "pid": "0x0383", "device_version": "1.0.0" }, + "matrix_pins": { + "cols": ["C14", "C15", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "B0", "B1", "A8", "A9", "H3"], + "rows": ["B4", "B3", "A15", "A14", "A13"] + }, + "diode_direction": "ROW2COL", "encoder": { "rotary": [ {"pin_a": "A10", "pin_b": "B5"} |