3 files changed, 3 insertions, 53 deletions
diff --git a/keyboards/kc60se/config.h b/keyboards/kc60se/config.h
index f6d4e2e42b..f84ace19bf 100644
--- a/keyboards/kc60se/config.h
+++ b/keyboards/kc60se/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
 
 /* * Keyboard Matrix Assignments */
 #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
@@ -33,46 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PIN F5
 #define BACKLIGHT_LEVELS 6
 
-// #define BACKLIGHT_BREATHING
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-// #define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-// #define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-// #define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/kc60se/info.json b/keyboards/kc60se/info.json
index f36972e0a0..3815eaf7a3 100644
--- a/keyboards/kc60se/info.json
+++ b/keyboards/kc60se/info.json
@@ -8,6 +8,9 @@
         "pid": "0x0000",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
+    "community_layouts": ["60_ansi", "60_ansi_split_bs_rshift", "60_iso", "60_iso_split_bs_rshift"],
     "layouts": {
         "LAYOUT_all": {
             "layout": [
diff --git a/keyboards/kc60se/rules.mk b/keyboards/kc60se/rules.mk
index 54d3028ce0..aa085b605e 100644
--- a/keyboards/kc60se/rules.mk
+++ b/keyboards/kc60se/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
@@ -15,5 +9,3 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output
-
-LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_iso_split_bs_rshift