diff options
Diffstat (limited to 'keyboards/kapcave/paladin64/config.h')
| -rwxr-xr-x | keyboards/kapcave/paladin64/config.h | 121 |
1 files changed, 121 insertions, 0 deletions
diff --git a/keyboards/kapcave/paladin64/config.h b/keyboards/kapcave/paladin64/config.h new file mode 100755 index 0000000000..7c3d1a0fa1 --- /dev/null +++ b/keyboards/kapcave/paladin64/config.h @@ -0,0 +1,121 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4B43 +#define PRODUCT_ID 0x5036 +#define DEVICE_VER 0x0001 +#define MANUFACTURER KapCave +#define PRODUCT paladin64 + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 8 + +#define BOOTMAGIC_LITE_ROW 3 +#define BOOTMAGIC_LITE_COLUMN 6 + +/* Only required if you add in a trackpoint hardware to the pcb */ +#ifdef PS2_USE_USART +#define PS2_CLOCK_PIN D5 +#define PS2_DATA_PIN D2 + + /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling + * edge */ + /* set DDR of CLOCK as input to be slave */ + #define PS2_USART_INIT() do { \ + PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ + PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ + UCSR1C = ((1 << UMSEL10) | \ + (3 << UPM10) | \ + (0 << USBS1) | \ + (3 << UCSZ10) | \ + (0 << UCPOL1)); \ + UCSR1A = 0; \ + UBRR1H = 0; \ + UBRR1L = 0; \ + } while (0) + #define PS2_USART_RX_INT_ON() do { \ + UCSR1B = ((1 << RXCIE1) | \ + (1 << RXEN1)); \ + } while (0) + #define PS2_USART_RX_POLL_ON() do { \ + UCSR1B = (1 << RXEN1); \ + } while (0) + #define PS2_USART_OFF() do { \ + UCSR1C = 0; \ + UCSR1B &= ~((1 << RXEN1) | \ + (1 << TXEN1)); \ + } while (0) + #define PS2_USART_RX_READY (UCSR1A & (1<<RXC1)) + #define PS2_USART_RX_DATA UDR1 + #define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1))) + #define PS2_USART_RX_VECT USART1_RX_vect +#endif + +#ifdef PS2_USE_INT +#define PS2_CLOCK_PIN D2 +#define PS2_DATA_PIN D5 + + #define PS2_INT_INIT() do { \ + EICRA |= ((1<<ISC21) | \ + (0<<ISC20)); \ + } while (0) + #define PS2_INT_ON() do { \ + EIMSK |= (1<<INT2); \ + } while (0) + #define PS2_INT_OFF() do { \ + EIMSK &= ~(1<<INT2); \ + } while (0) + #define PS2_INT_VECT INT2_vect + +#endif + +/* key matrix pins */ +#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, D6, B0, D3 } +#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, F0, D1 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ + +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 3 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define RGB_DI_PIN D0 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 14 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 12 +#endif |