8 files changed, 9 insertions, 171 deletions
diff --git a/keyboards/kakunpc/suihankey/alpha/config.h b/keyboards/kakunpc/suihankey/alpha/config.h
index 3a9e384d89..406339b621 100644
--- a/keyboards/kakunpc/suihankey/alpha/config.h
+++ b/keyboards/kakunpc/suihankey/alpha/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 4
@@ -45,10 +44,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 #define SPLIT_HAND_PIN D2
 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
    #define RGBLED_NUM 18
@@ -69,43 +64,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_TWINKLE
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -122,8 +85,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
-
 // #define RGBLED_SPLIT {18,18}
diff --git a/keyboards/kakunpc/suihankey/alpha/keymaps/default/keymap.c b/keyboards/kakunpc/suihankey/alpha/keymaps/default/keymap.c
index b581c54a08..339a7895cf 100644
--- a/keyboards/kakunpc/suihankey/alpha/keymaps/default/keymap.c
+++ b/keyboards/kakunpc/suihankey/alpha/keymaps/default/keymap.c
@@ -77,9 +77,10 @@ bool oled_task_user(void) {
   }
 
   // Host Keyboard LED Status
-  oled_write_P(IS_HOST_LED_ON(USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR("       "), false);
-  oled_write_P(IS_HOST_LED_ON(USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR("       "), false);
-  oled_write_P(IS_HOST_LED_ON(USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR("       "), false);
+  led_t led_state = host_keyboard_led_state();
+  oled_write_P(led_state.num_lock ? PSTR("NUMLCK ") : PSTR("       "), false);
+  oled_write_P(led_state.caps_lock ? PSTR("CAPLCK ") : PSTR("       "), false);
+  oled_write_P(led_state.scroll_lock ? PSTR("SCRLCK ") : PSTR("       "), false);
 
     return false;
 }
diff --git a/keyboards/kakunpc/suihankey/rev1/config.h b/keyboards/kakunpc/suihankey/rev1/config.h
index d24e9b7dbb..d33673a7ab 100644
--- a/keyboards/kakunpc/suihankey/rev1/config.h
+++ b/keyboards/kakunpc/suihankey/rev1/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -45,10 +44,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 #define SPLIT_HAND_PIN D2
 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
    #define RGBLED_NUM 18
@@ -69,43 +64,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_TWINKLE
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -122,8 +85,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
-
 // #define RGBLED_SPLIT {18,18}
diff --git a/keyboards/kakunpc/suihankey/rev1/keymaps/default/keymap.c b/keyboards/kakunpc/suihankey/rev1/keymaps/default/keymap.c
index b581c54a08..339a7895cf 100644
--- a/keyboards/kakunpc/suihankey/rev1/keymaps/default/keymap.c
+++ b/keyboards/kakunpc/suihankey/rev1/keymaps/default/keymap.c
@@ -77,9 +77,10 @@ bool oled_task_user(void) {
   }
 
   // Host Keyboard LED Status
-  oled_write_P(IS_HOST_LED_ON(USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR("       "), false);
-  oled_write_P(IS_HOST_LED_ON(USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR("       "), false);
-  oled_write_P(IS_HOST_LED_ON(USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR("       "), false);
+  led_t led_state = host_keyboard_led_state();
+  oled_write_P(led_state.num_lock ? PSTR("NUMLCK ") : PSTR("       "), false);
+  oled_write_P(led_state.caps_lock ? PSTR("CAPLCK ") : PSTR("       "), false);
+  oled_write_P(led_state.scroll_lock ? PSTR("SCRLCK ") : PSTR("       "), false);
 
     return false;
 }
diff --git a/keyboards/kakunpc/suihankey/split/alpha/config.h b/keyboards/kakunpc/suihankey/split/alpha/config.h
index 77a78982c6..ddb5dfdd7c 100644
--- a/keyboards/kakunpc/suihankey/split/alpha/config.h
+++ b/keyboards/kakunpc/suihankey/split/alpha/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 8
@@ -46,10 +45,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 #define SPLIT_HAND_PIN D2
 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
    #define RGBLED_NUM 18
@@ -60,43 +55,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
    #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -113,8 +76,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
-
 // #define RGBLED_SPLIT {18,18}
diff --git a/keyboards/kakunpc/suihankey/split/info.json b/keyboards/kakunpc/suihankey/split/info.json
index c440c905fa..43675197d0 100644
--- a/keyboards/kakunpc/suihankey/split/info.json
+++ b/keyboards/kakunpc/suihankey/split/info.json
@@ -8,6 +8,7 @@
         "pid": "0x0000",
         "device_version": "0.0.1"
     },
+    "community_layouts": ["split_3x5_3"],
     "layouts": {
         "LAYOUT_split_3x5_3": {
             "layout": [
diff --git a/keyboards/kakunpc/suihankey/split/rev1/config.h b/keyboards/kakunpc/suihankey/split/rev1/config.h
index 78dbb3e8d1..3a630bbee2 100644
--- a/keyboards/kakunpc/suihankey/split/rev1/config.h
+++ b/keyboards/kakunpc/suihankey/split/rev1/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 10
@@ -46,10 +45,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 #define SPLIT_HAND_PIN D2
 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
    #define RGBLED_NUM 18
@@ -70,43 +65,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_TWINKLE
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -123,8 +86,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
-
 // #define RGBLED_SPLIT {18,18}
diff --git a/keyboards/kakunpc/suihankey/split/rev1/rules.mk b/keyboards/kakunpc/suihankey/split/rev1/rules.mk
index d3661099d0..1e3cebb145 100644
--- a/keyboards/kakunpc/suihankey/split/rev1/rules.mk
+++ b/keyboards/kakunpc/suihankey/split/rev1/rules.mk
@@ -1,2 +1 @@
 RGBLIGHT_ENABLE = yes
-LAYOUTS = split_3x5_3