summaryrefslogtreecommitdiff
path: root/keyboards/infinity60
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/infinity60')
-rw-r--r--keyboards/infinity60/keymaps/jpetermans/keymap.c78
-rw-r--r--keyboards/infinity60/led.c3
-rw-r--r--keyboards/infinity60/led_controller.c148
3 files changed, 128 insertions, 101 deletions
diff --git a/keyboards/infinity60/keymaps/jpetermans/keymap.c b/keyboards/infinity60/keymaps/jpetermans/keymap.c
index 7b90bc8ede..c7145ed78e 100644
--- a/keyboards/infinity60/keymaps/jpetermans/keymap.c
+++ b/keyboards/infinity60/keymaps/jpetermans/keymap.c
@@ -12,6 +12,10 @@
#define _MEDIA 3
#define _TILDE 4
+/* ==================================
+ * KEYMAPS
+ * ==================================*/
+
const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Layer 0: Default Layer
* ,-----------------------------------------------------------.
@@ -58,7 +62,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,KC_MUTE, KC_VOLD, KC_VOLU,_______,KC_NO,\
_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,\
_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______, \
- _______,_______,F(2),F(3),_______,_______,_______, _______, KC_MPRV, KC_MNXT,KC_MSTP, _______,KC_NO, \
+ _______,_______,F(2),F(3),F(4),_______,_______, _______, KC_MPRV, KC_MNXT,KC_MSTP, _______,KC_NO, \
_______,_______,_______, KC_MPLY, _______,_______, _______,_______ \
),
/* ~ */
@@ -86,28 +90,35 @@ enum function_id {
enum macro_id {
ACTION_LEDS_ALL,
- ACTION_LEDS_GAME
-//TODO: ACTION_LED_LAYER which reads current layer and turns on appropriate LED
+ ACTION_LEDS_GAME,
+ ACTION_LED_1
};
+
+/* ==================================
+ * LED MAPPING
+ * ==================================*/
+
+//TODO: ACTION_LED_LAYER which reads current layer and turns on appropriate LED
/*
- Configuring led control can be done
+ Configuring led control can be done as
1. full keyboard at a time - define led array, or
- 2. individual - send specific led address (defined in keymap.h)
-
- The arrays relate to the mcu's LED pages (8 available) desribed in led_controller.c
+ 2. individual led - send specific led address (defined in keymap.h)
+
+ Infinity60 LED MAP
+ 11 12 13 14 15 16 17 18 21 22 23 24 25 26 27*
+ 28 31 32 33 34 35 36 37 38 41 42 43 44 45
+ 46 47 48 51 52 53 54 55 56 57 58 61 62
+ 63 64 65 66 67 68 71 72 73 74 75 76 77*
+ 78 81 82 83 84 85 86 87
+ *Unused in Alphabet Layout
+
+ The full keyboard arrays map to the mcu's LED pages
+ (8 available) desribed in led_controller.c
+
0x24 (pcb row 1) is first byte of PWM portion of LED page
0x34 (pcb row 2) is 17th byte of PWM portion of LED page
array translates to row and column positions
-
-
- Infinity60 LED MAP
- 11 12 13 14 15 16 17 18 21 22 23 24 25 26 27*
- 28 31 32 33 34 35 36 37 38 41 42 43 44 45
- 46 47 48 51 52 53 54 55 56 57 58 61 62
- 63 64 65 66 67 68 71 72 73 74 75 76 77*
- 78 81 82 83 84 85 86 87
-*Unused in Alphabet Layout
*/
//"WASD"
@@ -153,7 +164,8 @@ const uint16_t fn_actions[] = {
[0] = ACTION_KEY(LALT(LCTL(KC_DEL))),
[1] = ACTION_LAYER_MODS(_TILDE, MOD_LSFT),
[2] = ACTION_FUNCTION(ACTION_LEDS_ALL),
- [3] = ACTION_FUNCTION(ACTION_LEDS_GAME)
+ [3] = ACTION_FUNCTION(ACTION_LEDS_GAME),
+ [4] = ACTION_FUNCTION(ACTION_LED_1)
};
@@ -162,15 +174,21 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
(void)opt;
switch(id) {
case ACTION_LEDS_ALL:
- if(record->event.pressed) {
- // signal the LED controller thread
- chMBPost(&led_mailbox, LED_MSG_GAME_TOGGLE, TIME_IMMEDIATE);
- }
+ if(record->event.pressed) {
+ // signal the LED controller thread
+ chMBPost(&led_mailbox, 1, TIME_IMMEDIATE);
+ }
break;
case ACTION_LEDS_GAME:
if(record->event.pressed) {
// signal the LED controller thread
- chMBPost(&led_mailbox, LED_MSG_ALL_TOGGLE, TIME_IMMEDIATE);
+ chMBPost(&led_mailbox, 2, TIME_IMMEDIATE);
+ }
+ break;
+ case ACTION_LED_1:
+ if(record->event.pressed) {
+ // signal the LED controller thread
+ chMBPost(&led_mailbox, ADDR_LED_1, TIME_IMMEDIATE);
}
break;
}
@@ -179,14 +197,14 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
switch(id) {
- case 0:
- if (record->event.pressed) {
- }
- break;
- case 1:
- if (record->event.pressed) {
- }
- break;
+ case 0:
+ if (record->event.pressed) {
+ }
+ break;
+ case 1:
+ if (record->event.pressed) {
+ }
+ break;
}
return MACRO_NONE;
};
diff --git a/keyboards/infinity60/led.c b/keyboards/infinity60/led.c
index e17a5dd0d3..815a529fc8 100644
--- a/keyboards/infinity60/led.c
+++ b/keyboards/infinity60/led.c
@@ -36,6 +36,9 @@ void led_set(uint8_t usb_led) {
GPIOA->PCOR |= (1<<5);
}
*/
+//TODO: How does this test if led is set
+//usb_led --> led_set(usb_led) <-- chibios/host_keyboard_leds <-- keyboard_leds from usbSetupTransfer
+//keyboard_leds is enum'd in chibios/main.c
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
// signal the LED control thread
chSysUnconditionalLock();
diff --git a/keyboards/infinity60/led_controller.c b/keyboards/infinity60/led_controller.c
index 9579bc08b4..e0350bd93f 100644
--- a/keyboards/infinity60/led_controller.c
+++ b/keyboards/infinity60/led_controller.c
@@ -112,8 +112,8 @@ msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data) {
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, US2ST(IS31_TIMEOUT));
}
-msg_t is31_read_register(uint8_t b, uint8_t reg, uint8_t *result) {
- is31_select_page(b);
+msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result) {
+ is31_select_page(page);
tx[0] = reg;
return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 1, result, 1, US2ST(IS31_TIMEOUT));
@@ -134,6 +134,7 @@ void is31_init(void) {
// software shutdown
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, 0);
chThdSleepMilliseconds(10);
+ // TODO: This already done above, remove?
// zero function page, all registers
is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1);
chThdSleepMilliseconds(10);
@@ -159,7 +160,8 @@ static THD_FUNCTION(LEDthread, arg) {
(void)arg;
chRegSetThreadName("LEDthread");
- uint8_t temp;
+ uint8_t i;
+ uint8_t temp, pwm;
uint8_t save_page, save_breath1, save_breath2;
msg_t msg, retval;
@@ -170,78 +172,82 @@ static THD_FUNCTION(LEDthread, arg) {
chMBFetch(&led_mailbox, &msg, TIME_INFINITE);
// process 'msg' here
- switch(msg) {
+ // if msg between 0-7, then process as page#, otherwise a specific LED address
+ xprintf("--------------------\n");
+ xprintf("mailbox fetch\ntemp: %X - msg: %X\n", temp, msg);
+ if (msg < 8) {
+
+ // read current page into 'temp'
+ is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
+ chThdSleepMilliseconds(1);
+ // If page is already in layer, switch off (layer 0)
+ xprintf("Layer: post-read\ntemp: %X\n", temp);
+ if(temp == msg) {
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
+ } else {
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg);
+ }
+ xprintf("Layer: post-change\ntemp: %X\n", temp);
+
+ } else {
+
+ switch(msg) {
//TODO: make this generic and able to turn on/off any address and loop through all(or current) pages
- case LED_MSG_CAPS_ON:
- // turn caps on on pages 1 and 2
- is31_write_register(0, CAPS_LOCK_LED_ADDRESS, 0xFF);
- is31_write_register(1, CAPS_LOCK_LED_ADDRESS, 0xFF);
- is31_write_register(2, CAPS_LOCK_LED_ADDRESS, 0xFF);
- break;
- case LED_MSG_CAPS_OFF:
- // turn caps off on pages 1 and 2
- is31_write_register(0, CAPS_LOCK_LED_ADDRESS, 0);
- is31_write_register(1, CAPS_LOCK_LED_ADDRESS, 0);
- is31_write_register(2, CAPS_LOCK_LED_ADDRESS, 0);
- break;
- case LED_MSG_SLEEP_LED_ON:
- // save current settings
- is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &save_page);
- is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, &save_breath1);
- is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, &save_breath2);
- // use pages 7 and 8 for (hardware) breathing (assuming they're empty)
- is31_write_register(6, BREATHE_LED_ADDRESS, 0xFF);
- is31_write_register(7, BREATHE_LED_ADDRESS, 0x00);
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (6<<4)|6);
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
- retval = MSG_TIMEOUT;
- temp = 6;
- while(retval == MSG_TIMEOUT) {
- // switch to the other page
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, temp);
- temp = (temp == 6 ? 7 : 6);
- // the times should be sufficiently long for IS31 to finish switching pages
- retval = chMBFetch(&led_mailbox, &msg, MS2ST(temp == 6 ? 4000 : 6000));
- }
- // received a message (should be a wakeup), so restore previous state
- chThdSleepMilliseconds(3000); // need to wait until the page change finishes
- // note: any other messages are queued
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, save_breath1);
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, save_breath2);
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, save_page);
- break;
- case LED_MSG_SLEEP_LED_OFF:
- // should not get here; wakeup should be received in the branch above
- break;
- case LED_MSG_ALL_TOGGLE:
- // read current page into 'temp'
- is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
- chThdSleepMilliseconds(1);
- // switch to 'the other' page
- if(temp==2) {
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
- } else {
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 2);
- }
- break;
- case LED_MSG_GAME_TOGGLE:
- // read current page into 'temp'
- is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
- chThdSleepMilliseconds(1);
- // switch to 'the other' page
- if(temp==1) {
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
- } else {
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 1);
- }
- break;
+//TODO: set number of layers somewhere and loop through all when setting specific led
+ case LED_MSG_SLEEP_LED_ON:
+ // save current settings
+ is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &save_page);
+ is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, &save_breath1);
+ is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, &save_breath2);
+ // use pages 7 and 8 for (hardware) breathing (assuming they're empty)
+ is31_write_register(6, BREATHE_LED_ADDRESS, 0xFF);
+ is31_write_register(7, BREATHE_LED_ADDRESS, 0x00);
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (6<<4)|6);
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
+ retval = MSG_TIMEOUT;
+ temp = 6;
+ while(retval == MSG_TIMEOUT) {
+ // switch to the other page
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, temp);
+ temp = (temp == 6 ? 7 : 6);
+ // the times should be sufficiently long for IS31 to finish switching pages
+ retval = chMBFetch(&led_mailbox, &msg, MS2ST(temp == 6 ? 4000 : 6000));
+ }
+ // received a message (should be a wakeup), so restore previous state
+ chThdSleepMilliseconds(3000); // need to wait until the page change finishes
+ // note: any other messages are queued
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, save_breath1);
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, save_breath2);
+ is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, save_page);
+ break;
+ case LED_MSG_SLEEP_LED_OFF:
+ // should not get here; wakeup should be received in the branch above break;
+ break;
+ default:
+ if(msg >= 0x24) {
+ xprintf("Power pre-read\ntemp: %X - msg: %X - pwm: %X\n", temp, msg, pwm);
+ is31_read_register(0, msg, &temp);
+ chThdSleepMilliseconds(10);
+ xprintf("Post-read\ntemp: %X - msg: %X - pwm: %X\n", temp, msg, pwm);
+ chThdSleepMilliseconds(10);
+ pwm = (temp > 0x00 ? 0x00 : 0xFF);
+ xprintf("pwm after: %X\n", pwm);
+ chThdSleepMilliseconds(10);
+ for(i=0; i<8; i++) {
+ is31_write_register(i, msg, pwm);
+ }
+ xprintf("Power post-change\ntemp: %X - msg: %X - pwm: %X\n", temp, msg, pwm);
+ chThdSleepMilliseconds(10);
+ }
+ break;
+ }
}
+ xprintf("--------------------\n");
}
}
-
-/* =============
- * hook into TMK
- * ============= */
+/* =====================
+ * hook into user keymap
+ * ===================== */
void led_controller_init(void) {
uint8_t i;
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 07:46:35 +0000