5 files changed, 11 insertions, 152 deletions
diff --git a/keyboards/ianklug/grooveboard/config.h b/keyboards/ianklug/grooveboard/config.h
index 77aff8614a..12ff57c16b 100644
--- a/keyboards/ianklug/grooveboard/config.h
+++ b/keyboards/ianklug/grooveboard/config.h
@@ -17,99 +17,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 1
-#define MATRIX_COLS 4
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-//#define MATRIX_ROW_PINS { D0, D5 }
-//#define MATRIX_COL_PINS { F1, F0, B0 }
-#define DIRECT_PINS { \
-    { F7, F6, D1, D2 } \
-}
-
-/* COL2ROW, ROW2COL */
-//#define DIODE_DIRECTION COL2ROW
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
-//#define LED_NUM_LOCK_PIN B0
-//#define LED_CAPS_LOCK_PIN B1
-//#define LED_SCROLL_LOCK_PIN B2
-//#define LED_COMPOSE_PIN B3
-//#define LED_KANA_PIN B4
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//#    define RGBLED_NUM 16
-//#    define RGBLIGHT_HUE_STEP 8
-//#    define RGBLIGHT_SAT_STEP 8
-//#    define RGBLIGHT_VAL_STEP 8
-//#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-//#endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -125,7 +37,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/ianklug/grooveboard/grooveboard.c b/keyboards/ianklug/grooveboard/grooveboard.c
deleted file mode 100644
index 711e9f301d..0000000000
--- a/keyboards/ianklug/grooveboard/grooveboard.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/* Copyright 2021 ianklug
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "grooveboard.h"
diff --git a/keyboards/ianklug/grooveboard/grooveboard.h b/keyboards/ianklug/grooveboard/grooveboard.h
deleted file mode 100644
index 51f519e8a0..0000000000
--- a/keyboards/ianklug/grooveboard/grooveboard.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Copyright 2021 ianklug
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-
-/* This is a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-#define LAYOUT( \
-    k00, k01, k02, k03 \
-) { \
-    { k00, k01, k02, k03 } \
-}
diff --git a/keyboards/ianklug/grooveboard/info.json b/keyboards/ianklug/grooveboard/info.json
index a4bb849952..bf4cadae84 100644
--- a/keyboards/ianklug/grooveboard/info.json
+++ b/keyboards/ianklug/grooveboard/info.json
@@ -8,13 +8,20 @@
         "pid": "0x4742",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
+    "matrix_pins": {
+        "direct": [
+            ["F7", "F6", "D1", "D2"]
+        ]
+    },
     "layouts": {
         "LAYOUT": {
             "layout": [
-                {"label": "k00", "x": 0, "y": 0, "w": 1, "h": 1},
-                {"label": "k01", "x": 1, "y": 0, "w": 1, "h": 1},
-                {"label": "k02", "x": 4, "y": 0, "w": 1, "h": 1},
-                {"label": "k03", "x": 5, "y": 0, "w": 1, "h": 1}
+                {"x": 0, "y": 0, "matrix": [0, 0]},
+                {"x": 1, "y": 0, "matrix": [0, 1]},
+                {"x": 4, "y": 0, "matrix": [0, 2]},
+                {"x": 5, "y": 0, "matrix": [0, 3]}
 			]
         }
     }
diff --git a/keyboards/ianklug/grooveboard/rules.mk b/keyboards/ianklug/grooveboard/rules.mk
index 1275531ef6..ab2c49da70 100644
--- a/keyboards/ianklug/grooveboard/rules.mk
+++ b/keyboards/ianklug/grooveboard/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #