summaryrefslogtreecommitdiff
path: root/keyboards/hnahkb
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/hnahkb')
-rw-r--r--keyboards/hnahkb/freyr/config.h65
-rw-r--r--keyboards/hnahkb/freyr/info.json12
-rw-r--r--keyboards/hnahkb/freyr/rules.mk8
-rw-r--r--keyboards/hnahkb/stella/config.h64
-rw-r--r--keyboards/hnahkb/stella/info.json12
-rw-r--r--keyboards/hnahkb/stella/rules.mk8
-rw-r--r--keyboards/hnahkb/vn66/config.h53
-rw-r--r--keyboards/hnahkb/vn66/info.json17
-rw-r--r--keyboards/hnahkb/vn66/rules.mk8
9 files changed, 42 insertions, 205 deletions
diff --git a/keyboards/hnahkb/freyr/config.h b/keyboards/hnahkb/freyr/config.h
index 81cd407d13..1903af4ff1 100644
--- a/keyboards/hnahkb/freyr/config.h
+++ b/keyboards/hnahkb/freyr/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 10
/*
* Keyboard Matrix Assignments
@@ -39,67 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-#define LED_CAPS_LOCK_PIN B3
-#define LED_SCROLL_LOCK_PIN B7
-#define LED_PIN_ON_STATE 0
-
-#define BACKLIGHT_PIN B6
-#define BACKLIGHT_LEVELS 3
-#define BACKLIGHT_BREATHING
-
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -115,7 +54,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/hnahkb/freyr/info.json b/keyboards/hnahkb/freyr/info.json
index 4bb8ae739d..7c946bd78a 100644
--- a/keyboards/hnahkb/freyr/info.json
+++ b/keyboards/hnahkb/freyr/info.json
@@ -8,6 +8,18 @@
"pid": "0x1895",
"device_version": "0.0.2"
},
+ "backlight": {
+ "pin": "B6",
+ "breathing": true
+ },
+ "indicators": {
+ "caps_lock": "B3",
+ "scroll_lock": "B7",
+ "on_state": 0
+ },
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
+ "community_layouts": ["tkl_ansi", "tkl_iso"],
"layouts": {
"LAYOUT_all": {
"layout": [
diff --git a/keyboards/hnahkb/freyr/rules.mk b/keyboards/hnahkb/freyr/rules.mk
index 063d967a7f..26064ab2ac 100644
--- a/keyboards/hnahkb/freyr/rules.mk
+++ b/keyboards/hnahkb/freyr/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -16,5 +10,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-
-LAYOUTS = tkl_ansi tkl_iso
diff --git a/keyboards/hnahkb/stella/config.h b/keyboards/hnahkb/stella/config.h
index 46112a56cc..34c3aafab4 100644
--- a/keyboards/hnahkb/stella/config.h
+++ b/keyboards/hnahkb/stella/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 10
/*
* Keyboard Matrix Assignments
@@ -39,67 +34,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-#define LED_CAPS_LOCK_PIN B3
-#define LED_SCROLL_LOCK_PIN B7
-#define LED_PIN_ON_STATE 0
-
-#define BACKLIGHT_PIN B6
-#define BACKLIGHT_LEVELS 3
-#define BACKLIGHT_BREATHING
-
#define RGB_DI_PIN E2
-#ifdef RGB_DI_PIN
-# define RGBLED_NUM 14
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-#endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
+#define RGBLED_NUM 14
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -115,7 +57,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/hnahkb/stella/info.json b/keyboards/hnahkb/stella/info.json
index bd3870bd4e..593dc47771 100644
--- a/keyboards/hnahkb/stella/info.json
+++ b/keyboards/hnahkb/stella/info.json
@@ -8,6 +8,18 @@
"pid": "0x0AB7",
"device_version": "0.0.1"
},
+ "backlight": {
+ "pin": "B6",
+ "breathing": true
+ },
+ "indicators": {
+ "caps_lock": "B3",
+ "scroll_lock": "B7",
+ "on_state": 0
+ },
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
+ "community_layouts": ["tkl_ansi", "tkl_iso"],
"layouts": {
"LAYOUT_all": {
"layout": [
diff --git a/keyboards/hnahkb/stella/rules.mk b/keyboards/hnahkb/stella/rules.mk
index 1632d897c7..b7e8d8e706 100644
--- a/keyboards/hnahkb/stella/rules.mk
+++ b/keyboards/hnahkb/stella/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-
-LAYOUTS = tkl_ansi tkl_iso
diff --git a/keyboards/hnahkb/vn66/config.h b/keyboards/hnahkb/vn66/config.h
index 50c97ad6a8..8436f5df25 100644
--- a/keyboards/hnahkb/vn66/config.h
+++ b/keyboards/hnahkb/vn66/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
/*
* Keyboard Matrix Assignments
@@ -39,17 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-#define LED_CAPS_LOCK_PIN E6
-#define LED_PIN_ON_STATE 0
-
-#define BACKLIGHT_PIN B6
-#define BACKLIGHT_LEVELS 4
-#define BACKLIGHT_BREATHING
-
-#define ENCODERS_PAD_A { B0 }
-#define ENCODERS_PAD_B { B7 }
-#define ENCODER_RESOLUTION 2
-
#define RGB_DI_PIN E2
#ifdef RGB_DI_PIN
# define RGBLED_NUM 20
@@ -68,20 +52,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
@@ -93,27 +65,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define GRAVE_ESC_CTRL_OVERRIDE
/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
@@ -128,7 +79,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/hnahkb/vn66/info.json b/keyboards/hnahkb/vn66/info.json
index bff3ba596d..b35cabd1a1 100644
--- a/keyboards/hnahkb/vn66/info.json
+++ b/keyboards/hnahkb/vn66/info.json
@@ -8,6 +8,23 @@
"pid": "0xCA2C",
"device_version": "0.0.1"
},
+ "encoder": {
+ "rotary": [
+ {"pin_a": "B0", "pin_b": "B7", "resolution": 2}
+ ]
+ },
+ "backlight": {
+ "pin": "B6",
+ "levels": 4,
+ "breathing": true
+ },
+ "indicators": {
+ "caps_lock": "E6",
+ "on_state": 0
+ },
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
+ "community_layouts": ["66_ansi", "66_iso"],
"layouts": {
"LAYOUT_all": {
"layout": [
diff --git a/keyboards/hnahkb/vn66/rules.mk b/keyboards/hnahkb/vn66/rules.mk
index 542b79b4d8..4f5a4635de 100644
--- a/keyboards/hnahkb/vn66/rules.mk
+++ b/keyboards/hnahkb/vn66/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -18,5 +12,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
ENCODER_ENABLE = yes
LTO_ENABLE = yes
-
-LAYOUTS = 66_ansi 66_iso
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 17:21:01 +0000