diff options
Diffstat (limited to 'keyboards/hineybush')
46 files changed, 90 insertions, 693 deletions
diff --git a/keyboards/hineybush/h08_ocelot/config.h b/keyboards/hineybush/h08_ocelot/config.h index 2499e4ba50..7037db7735 100644 --- a/keyboards/hineybush/h08_ocelot/config.h +++ b/keyboards/hineybush/h08_ocelot/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 4 /* * Keyboard Matrix Assignments @@ -39,21 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -//#define LED_NUM_LOCK_PIN B0 -//#define LED_CAPS_LOCK_PIN B1 -//#define LED_SCROLL_LOCK_PIN B2 -//#define LED_COMPOSE_PIN B3 -//#define LED_KANA_PIN B4 - -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - #define RGB_DI_PIN F1 #ifdef RGB_DI_PIN # define RGBLED_NUM 7 @@ -72,51 +52,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -132,7 +74,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/hineybush/h08_ocelot/info.json b/keyboards/hineybush/h08_ocelot/info.json index 94de718a3e..d7e395285b 100644 --- a/keyboards/hineybush/h08_ocelot/info.json +++ b/keyboards/hineybush/h08_ocelot/info.json @@ -8,6 +8,8 @@ "pid": "0xE8E9", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}] diff --git a/keyboards/hineybush/h08_ocelot/rules.mk b/keyboards/hineybush/h08_ocelot/rules.mk index 465de5f68d..c09eb37bfd 100644 --- a/keyboards/hineybush/h08_ocelot/rules.mk +++ b/keyboards/hineybush/h08_ocelot/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/hineybush/h10/config.h b/keyboards/hineybush/h10/config.h index 428e7c7905..a754f6bda6 100644 --- a/keyboards/hineybush/h10/config.h +++ b/keyboards/hineybush/h10/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 4 /* * Keyboard Matrix Assignments @@ -43,59 +38,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/hineybush/h10/info.json b/keyboards/hineybush/h10/info.json index 6570e0af49..d62ce90c6a 100644 --- a/keyboards/hineybush/h10/info.json +++ b/keyboards/hineybush/h10/info.json @@ -8,6 +8,9 @@ "pid": "0xEBD8", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "community_layouts": ["ortho_6x4", "numpad_6x4"], "layouts": { "LAYOUT_ortho_6x4": { "layout": [ diff --git a/keyboards/hineybush/h10/rules.mk b/keyboards/hineybush/h10/rules.mk index 12b7178a79..432c9ea5d2 100644 --- a/keyboards/hineybush/h10/rules.mk +++ b/keyboards/hineybush/h10/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = ortho_6x4 numpad_6x4 diff --git a/keyboards/hineybush/h60/config.h b/keyboards/hineybush/h60/config.h index f2205d1121..231ad9cbc3 100644 --- a/keyboards/hineybush/h60/config.h +++ b/keyboards/hineybush/h60/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 #define MATRIX_ROW_PINS { B6, B5, B4, D7, E6 } #define MATRIX_COL_PINS { B3, D0, D1, D2, D3, D5, D6, C7, F0, F1, F4, F5, F6, F7 } @@ -61,22 +56,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_EFFECT_STATIC_GRADIENT // #define RGBLIGHT_EFFECT_RGB_TEST // #define RGBLIGHT_EFFECT_ALTERNATING -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/hineybush/h60/info.json b/keyboards/hineybush/h60/info.json index b32da796d7..e4c62971b2 100644 --- a/keyboards/hineybush/h60/info.json +++ b/keyboards/hineybush/h60/info.json @@ -8,6 +8,9 @@ "pid": "0xEBBE", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "community_layouts": ["60_ansi", "60_ansi_split_bs_rshift", "60_hhkb", "60_tsangan_hhkb"], "layouts": { "LAYOUT_60_ansi": { "layout": [ diff --git a/keyboards/hineybush/h60/rules.mk b/keyboards/hineybush/h60/rules.mk index dfbde71e2b..6764167b6b 100644 --- a/keyboards/hineybush/h60/rules.mk +++ b/keyboards/hineybush/h60/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -17,5 +11,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output SLEEP_LED_ENABLE = yes - -LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_hhkb 60_tsangan_hhkb diff --git a/keyboards/hineybush/h65/config.h b/keyboards/hineybush/h65/config.h index f4f3900afe..cd0bd06da9 100644 --- a/keyboards/hineybush/h65/config.h +++ b/keyboards/hineybush/h65/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 /* * Keyboard Matrix Assignments @@ -39,17 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -//#define LED_NUM_LOCK_PIN B0 -#define LED_CAPS_LOCK_PIN E6 -//#define LED_SCROLL_LOCK_PIN B2 -//#define LED_COMPOSE_PIN B3 -//#define LED_KANA_PIN B4 - #define BACKLIGHT_PIN B7 #define BACKLIGHT_LEVELS 3 #define BACKLIGHT_BREATHING @@ -72,51 +56,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -132,7 +78,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/hineybush/h65/info.json b/keyboards/hineybush/h65/info.json index 500843fe07..7a6658bf89 100644 --- a/keyboards/hineybush/h65/info.json +++ b/keyboards/hineybush/h65/info.json @@ -8,6 +8,12 @@ "pid": "0xE9E4", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "E6" + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "community_layouts": ["65_ansi_blocker", "65_ansi_blocker_split_bs", "65_ansi_blocker_tsangan", "65_iso_blocker", "65_iso_blocker_split_bs"], "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/hineybush/h65/rules.mk b/keyboards/hineybush/h65/rules.mk index 904686fd9c..85830d3115 100644 --- a/keyboards/hineybush/h65/rules.mk +++ b/keyboards/hineybush/h65/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs 65_ansi_blocker_tsangan 65_iso_blocker 65_iso_blocker_split_bs diff --git a/keyboards/hineybush/h65_hotswap/config.h b/keyboards/hineybush/h65_hotswap/config.h index f4f3900afe..cd0bd06da9 100644 --- a/keyboards/hineybush/h65_hotswap/config.h +++ b/keyboards/hineybush/h65_hotswap/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 /* * Keyboard Matrix Assignments @@ -39,17 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -//#define LED_NUM_LOCK_PIN B0 -#define LED_CAPS_LOCK_PIN E6 -//#define LED_SCROLL_LOCK_PIN B2 -//#define LED_COMPOSE_PIN B3 -//#define LED_KANA_PIN B4 - #define BACKLIGHT_PIN B7 #define BACKLIGHT_LEVELS 3 #define BACKLIGHT_BREATHING @@ -72,51 +56,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -132,7 +78,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/hineybush/h65_hotswap/info.json b/keyboards/hineybush/h65_hotswap/info.json index c2472e6879..c69a6c1491 100644 --- a/keyboards/hineybush/h65_hotswap/info.json +++ b/keyboards/hineybush/h65_hotswap/info.json @@ -8,9 +8,15 @@ "pid": "0xE8B7", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "E6" + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layout_aliases": { "LAYOUT": "LAYOUT_all" }, + "community_layouts": ["65_ansi_blocker", "65_ansi_blocker_split_bs", "65_iso_blocker", "65_iso_blocker_split_bs"], "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/hineybush/h65_hotswap/rules.mk b/keyboards/hineybush/h65_hotswap/rules.mk index f4afd28025..85830d3115 100644 --- a/keyboards/hineybush/h65_hotswap/rules.mk +++ b/keyboards/hineybush/h65_hotswap/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs 65_iso_blocker 65_iso_blocker_split_bs diff --git a/keyboards/hineybush/h660s/config.h b/keyboards/hineybush/h660s/config.h index ad2d13ded2..8c29483dad 100644 --- a/keyboards/hineybush/h660s/config.h +++ b/keyboards/hineybush/h660s/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 /* * Keyboard Matrix Assignments @@ -60,51 +55,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_STATIC_GRADIENT # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -120,7 +77,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/hineybush/h660s/info.json b/keyboards/hineybush/h660s/info.json index f3a5f7aaf4..880f31c923 100644 --- a/keyboards/hineybush/h660s/info.json +++ b/keyboards/hineybush/h660s/info.json @@ -8,6 +8,8 @@ "pid": "0xEB1B", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_66_ansi": { "layout": [ diff --git a/keyboards/hineybush/h660s/rules.mk b/keyboards/hineybush/h660s/rules.mk index b42558c680..5ed3676575 100644 --- a/keyboards/hineybush/h660s/rules.mk +++ b/keyboards/hineybush/h660s/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/hineybush/h75_singa/config.h b/keyboards/hineybush/h75_singa/config.h index d1a75c77be..75ede6d8bf 100644 --- a/keyboards/hineybush/h75_singa/config.h +++ b/keyboards/hineybush/h75_singa/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 16 /* * Keyboard Matrix Assignments @@ -62,51 +57,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -122,7 +79,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/hineybush/h75_singa/info.json b/keyboards/hineybush/h75_singa/info.json index ba2f50b355..6ca317e720 100644 --- a/keyboards/hineybush/h75_singa/info.json +++ b/keyboards/hineybush/h75_singa/info.json @@ -8,6 +8,8 @@ "pid": "0xEC9A", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1}, {"x":14, "y":1}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"x":12.75, "y":3}, {"label":"Enter", "x":13.75, "y":3, "w":1.25}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":2.75}, {"x":6.5, "y":5, "w":1.25}, {"x":7.75, "y":5, "w":2.25}, {"label":"Alt", "x":10, "y":5, "w":1.5}, {"label":"Ctrl", "x":11.5, "y":5, "w":1.5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}] diff --git a/keyboards/hineybush/h75_singa/rules.mk b/keyboards/hineybush/h75_singa/rules.mk index 4323e2466e..0a394ac16e 100644 --- a/keyboards/hineybush/h75_singa/rules.mk +++ b/keyboards/hineybush/h75_singa/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/hineybush/h87a/config.h b/keyboards/hineybush/h87a/config.h index 6a7920f7d3..f15a2f499e 100644 --- a/keyboards/hineybush/h87a/config.h +++ b/keyboards/hineybush/h87a/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define CONFIG_H -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 9 /* * Keyboard Matrix Assignments @@ -40,17 +35,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/hineybush/h87a/info.json b/keyboards/hineybush/h87a/info.json index e9164edfcd..c24e1082dc 100644 --- a/keyboards/hineybush/h87a/info.json +++ b/keyboards/hineybush/h87a/info.json @@ -8,6 +8,8 @@ "pid": "0xECE9", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"x":13, "y":1.5}, {"label":"Bksp", "x":14, "y":1.5}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"label":"Enter", "x":13.75, "y":3.5, "w":1.25}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}] diff --git a/keyboards/hineybush/h87a/keymaps/gam3cat/keymap.c b/keyboards/hineybush/h87a/keymaps/gam3cat/keymap.c index b3f76d60d1..76fd4abae9 100644 --- a/keyboards/hineybush/h87a/keymaps/gam3cat/keymap.c +++ b/keyboards/hineybush/h87a/keymaps/gam3cat/keymap.c @@ -44,13 +44,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Ctrl |Win|Alt | Space |RAlt |Fn |Ctrl |Lft|Dwn|Rgt| * *-----------------------------------------------------------------------* */ - [_BL] = LAYOUT_all( \ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, \ - KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, KC_RALT, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ + [_BL] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, + KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, KC_RALT, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), /*#### _WL: Workman Layer. * .-----------------------------------------------------------------------. @@ -67,13 +67,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | * *-----------------------------------------------------------------------* */ - [_WL] = LAYOUT_all( \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, KC_Q , KC_D , KC_R , KC_W , KC_B , KC_J , KC_F , KC_U , KC_P , KC_SCLN, _______, _______, _______, _______, _______, _______, \ - _______, KC_A , KC_S , KC_H , KC_T , KC_G , KC_Y , KC_N , KC_E , KC_O , KC_I , _______, _______, _______, \ - _______, _______, KC_Z , KC_X , KC_M , KC_C , KC_V , KC_K , KC_L , KC_COMM, KC_DOT , KC_SLSH, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + [_WL] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_Q , KC_D , KC_R , KC_W , KC_B , KC_J , KC_F , KC_U , KC_P , KC_SCLN, _______, _______, _______, _______, _______, _______, + _______, KC_A , KC_S , KC_H , KC_T , KC_G , KC_Y , KC_N , KC_E , KC_O , KC_I , _______, _______, _______, + _______, _______, KC_Z , KC_X , KC_M , KC_C , KC_V , KC_K , KC_L , KC_COMM, KC_DOT , KC_SLSH, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), /*#### _NL: Norman Layer. * .-----------------------------------------------------------------------. @@ -90,13 +90,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | * *-----------------------------------------------------------------------* */ - [_NL] = LAYOUT_all( \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, KC_Q , KC_W , KC_D , KC_F , KC_K , KC_J , KC_U , KC_R , KC_L , KC_SCLN, _______, _______, _______, _______, _______, _______, \ - _______, KC_A , KC_S , KC_E , KC_T , KC_G , KC_Y , KC_N , KC_I , KC_O , KC_H , _______, _______, _______, \ - _______, _______, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_P , KC_M , KC_COMM, KC_DOT , KC_SLSH, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + [_NL] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_Q , KC_W , KC_D , KC_F , KC_K , KC_J , KC_U , KC_R , KC_L , KC_SCLN, _______, _______, _______, _______, _______, _______, + _______, KC_A , KC_S , KC_E , KC_T , KC_G , KC_Y , KC_N , KC_I , KC_O , KC_H , _______, _______, _______, + _______, _______, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_P , KC_M , KC_COMM, KC_DOT , KC_SLSH, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), /*#### _DL: Dvorak Layer. * .-----------------------------------------------------------------------. @@ -113,13 +113,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | * *-----------------------------------------------------------------------* */ - [_DL] = LAYOUT_all( \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______, _______, _______, _______, _______, \ - _______, KC_QUOT, KC_COMM, KC_DOT , KC_P , KC_Y , KC_F , KC_G , KC_C , KC_R , KC_L , KC_SLSH, KC_EQL , _______, _______, _______, _______, \ - _______, KC_A , KC_O , KC_E , KC_U , KC_I , KC_D , KC_H , KC_T , KC_N , KC_S , KC_MINS, _______, _______, \ - _______, _______, KC_SCLN, KC_Q , KC_J , KC_K , KC_X , KC_B , KC_M , KC_W , KC_V , KC_Z , _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + [_DL] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______, _______, _______, _______, _______, + _______, KC_QUOT, KC_COMM, KC_DOT , KC_P , KC_Y , KC_F , KC_G , KC_C , KC_R , KC_L , KC_SLSH, KC_EQL , _______, _______, _______, _______, + _______, KC_A , KC_O , KC_E , KC_U , KC_I , KC_D , KC_H , KC_T , KC_N , KC_S , KC_MINS, _______, _______, + _______, _______, KC_SCLN, KC_Q , KC_J , KC_K , KC_X , KC_B , KC_M , KC_W , KC_V , KC_Z , _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), /*#### _CL: Colmak Layer. * .-----------------------------------------------------------------------. @@ -136,13 +136,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | * *-----------------------------------------------------------------------* */ - [_CL] = LAYOUT_all( \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, KC_Q , KC_W , KC_F , KC_P , KC_G , KC_J , KC_L , KC_U , KC_Y , KC_SCLN, _______, _______, _______, _______, _______, _______, \ - _______, KC_A , KC_R , KC_S , KC_T , KC_D , KC_H , KC_N , KC_E , KC_I , KC_O , _______, _______, _______, \ - _______, _______, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_K , KC_M , KC_COMM, KC_DOT , KC_SLSH, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + [_CL] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_Q , KC_W , KC_F , KC_P , KC_G , KC_J , KC_L , KC_U , KC_Y , KC_SCLN, _______, _______, _______, _______, _______, _______, + _______, KC_A , KC_R , KC_S , KC_T , KC_D , KC_H , KC_N , KC_E , KC_I , KC_O , _______, _______, _______, + _______, _______, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_K , KC_M , KC_COMM, KC_DOT , KC_SLSH, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), /*#### _FL: Function Layer. * .-----------------------------------------------------------------------. @@ -159,13 +159,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | SP4 | |Fn | |WBk| |WFw| * *-----------------------------------------------------------------------* */ - [_FL] = LAYOUT_all( \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE, KC_VOLD, KC_VOLU, XXXXXXX, XXXXXXX, XXXXXXX, \ - KC_WEB, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - MO(_AL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, \ - XXXXXXX, XXXXXXX, KC_MENU, KC_SP4, XXXXXXX, _______, XXXXXXX, XXXXXXX, KC_WBAK, XXXXXXX, KC_WFWD \ + [_FL] = LAYOUT_all( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE, KC_VOLD, KC_VOLU, XXXXXXX, XXXXXXX, XXXXXXX, + KC_WEB, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + MO(_AL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, + XXXXXXX, XXXXXXX, KC_MENU, KC_SP4, XXXXXXX, _______, XXXXXXX, XXXXXXX, KC_WBAK, XXXXXXX, KC_WFWD ), /*#### _AL: Adjust Layer - Keymap select, LED backlight, and Dynamic Macro settings. * .-----------------------------------------------------------------------. @@ -182,13 +182,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | |Fn | | | | | * *-----------------------------------------------------------------------* */ - [_AL] = LAYOUT_all( \ - QK_BOOT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - QMK_REV, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, XXXXXXX, BL_TOGG, BL_DOWN, BL_UP, XXXXXXX, XXXXXXX, XXXXXXX, KC_DMR1, KC_DMP1, \ - _______, DF(_BL), DF(_WL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_DMRS, KC_DMR2, KC_DMP2, \ - XXXXXXX, XXXXXXX, XXXXXXX, DF(_DL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, DF(_CL), XXXXXXX, DF(_BL), DF(_NL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \ + [_AL] = LAYOUT_all( + QK_BOOT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + QMK_REV, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, XXXXXXX, BL_TOGG, BL_DOWN, BL_UP, XXXXXXX, XXXXXXX, XXXXXXX, KC_DMR1, KC_DMP1, + _______, DF(_BL), DF(_WL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_DMRS, KC_DMR2, KC_DMP2, + XXXXXXX, XXXXXXX, XXXXXXX, DF(_DL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, DF(_CL), XXXXXXX, DF(_BL), DF(_NL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX ), }; diff --git a/keyboards/hineybush/h87a/rules.mk b/keyboards/hineybush/h87a/rules.mk index 7d4728f70c..9748c083e3 100644 --- a/keyboards/hineybush/h87a/rules.mk +++ b/keyboards/hineybush/h87a/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/hineybush/h88/config.h b/keyboards/hineybush/h88/config.h index 241df48ecf..36547704ab 100644 --- a/keyboards/hineybush/h88/config.h +++ b/keyboards/hineybush/h88/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 9 /* * Keyboard Matrix Assignments @@ -40,17 +35,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/hineybush/h88/info.json b/keyboards/hineybush/h88/info.json index 559e7a2027..c011d100ae 100644 --- a/keyboards/hineybush/h88/info.json +++ b/keyboards/hineybush/h88/info.json @@ -8,6 +8,8 @@ "pid": "0xECA2", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"F13", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"x":13, "y":1.25}, {"label":"Bksp", "x":14, "y":1.25}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"x":12.75, "y":3.25}, {"label":"Enter", "x":13.75, "y":3.25, "w":1.25}, {"label":"Shift", "x":0, "y":4.25, "w":1.25}, {"x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, {"x":14, "y":4.25}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}] diff --git a/keyboards/hineybush/h88/rules.mk b/keyboards/hineybush/h88/rules.mk index 7d4728f70c..9748c083e3 100644 --- a/keyboards/hineybush/h88/rules.mk +++ b/keyboards/hineybush/h88/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/hineybush/hbcp/config.h b/keyboards/hineybush/hbcp/config.h index 8ed0f61528..59c857a020 100644 --- a/keyboards/hineybush/hbcp/config.h +++ b/keyboards/hineybush/hbcp/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -64,20 +63,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE diff --git a/keyboards/hineybush/hbcp/info.json b/keyboards/hineybush/hbcp/info.json index d63e293bb5..8e1b8bbbcc 100644 --- a/keyboards/hineybush/hbcp/info.json +++ b/keyboards/hineybush/hbcp/info.json @@ -8,6 +8,8 @@ "pid": "0xECE8", "device_version": "0.0.1" }, + "processor": "at90usb1286", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/hineybush/hbcp/keymaps/hiney/keymap.c b/keyboards/hineybush/hbcp/keymaps/hiney/keymap.c index 018d1eea14..5f1d7700f6 100644 --- a/keyboards/hineybush/hbcp/keymaps/hiney/keymap.c +++ b/keyboards/hineybush/hbcp/keymaps/hiney/keymap.c @@ -25,13 +25,6 @@ enum custom_keycodes { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_wkl( /* Base */ - - /*K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, K017, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013, K114, K115, K116, K117, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, K315, K316, K317, \ - K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, \ - K500, K501, K505, K510, K511, K512, K513, K514, K515, K516, K517 \*/ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, KC_PGUP, KC_PGDN, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_LNUM, KC_PSLS, KC_PAST, KC_PAUS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, diff --git a/keyboards/hineybush/hbcp/rules.mk b/keyboards/hineybush/hbcp/rules.mk index 669b18a549..f60d6afa1e 100644 --- a/keyboards/hineybush/hbcp/rules.mk +++ b/keyboards/hineybush/hbcp/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/hineybush/hineyg80/config.h b/keyboards/hineybush/hineyg80/config.h index 3d9b59bc55..71f0203adb 100644 --- a/keyboards/hineybush/hineyg80/config.h +++ b/keyboards/hineybush/hineyg80/config.h @@ -1,10 +1,5 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 9 /* key matrix pins */ #define MATRIX_ROW_PINS { B2, B3, D0, B1, D2, D1, D5, D3, D6, D4, B4, D7 } @@ -13,20 +8,10 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -#define LED_NUM_LOCK_PIN C6 -#define LED_CAPS_LOCK_PIN B6 -#define LED_SCROLL_LOCK_PIN B5 - -/* number of backlight levels */ - #ifdef BACKLIGHT_PIN #define BACKLIGHT_LEVELS 3 #endif -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/hineybush/hineyg80/info.json b/keyboards/hineybush/hineyg80/info.json index 40c54ebe40..dcc3aa5f29 100644 --- a/keyboards/hineybush/hineyg80/info.json +++ b/keyboards/hineybush/hineyg80/info.json @@ -8,6 +8,13 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "B6", + "num_lock": "C6", + "scroll_lock": "B5" + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"Pause", "x":15.5, "y":0}, {"label":"Insert", "x":16.5, "y":0}, {"label":"Home", "x":17.5, "y":0}, {"label":"PgUp", "x":18.5, "y":0}, {"label":"Scroll Lock", "x":15.5, "y":1}, {"label":"Delete", "x":16.5, "y":1}, {"label":"End", "x":17.5, "y":1}, {"label":"PgDn", "x":18.5, "y":1}, {"label":"~", "x":0, "y":2}, {"label":"!", "x":1, "y":2}, {"label":"@", "x":2, "y":2}, {"label":"#", "x":3, "y":2}, {"label":"$", "x":4, "y":2}, {"label":"%", "x":5, "y":2}, {"label":"^", "x":6, "y":2}, {"label":"&", "x":7, "y":2}, {"label":"*", "x":8, "y":2}, {"label":"(", "x":9, "y":2}, {"label":")", "x":10, "y":2}, {"label":"_", "x":11, "y":2}, {"label":"+", "x":12, "y":2}, {"label":"Bksp", "x":13, "y":2}, {"x":14, "y":2}, {"label":"Num Lock", "x":15.5, "y":2}, {"label":"/", "x":16.5, "y":2}, {"label":"*", "x":17.5, "y":2}, {"label":"-", "x":18.5, "y":2}, {"label":"Tab", "x":0, "y":3, "w":1.5}, {"label":"Q", "x":1.5, "y":3}, {"label":"W", "x":2.5, "y":3}, {"label":"E", "x":3.5, "y":3}, {"label":"R", "x":4.5, "y":3}, {"label":"T", "x":5.5, "y":3}, {"label":"Y", "x":6.5, "y":3}, {"label":"U", "x":7.5, "y":3}, {"label":"I", "x":8.5, "y":3}, {"label":"O", "x":9.5, "y":3}, {"label":"P", "x":10.5, "y":3}, {"label":"{", "x":11.5, "y":3}, {"label":"}", "x":12.5, "y":3}, {"label":"|", "x":13.5, "y":3, "w":1.5}, {"label":"7", "x":15.5, "y":3}, {"label":"8", "x":16.5, "y":3}, {"label":"9", "x":17.5, "y":3}, {"label":"+", "x":18.5, "y":3}, {"label":"Caps Lock", "x":0, "y":4, "w":1.75}, {"label":"A", "x":1.75, "y":4}, {"label":"S", "x":2.75, "y":4}, {"label":"D", "x":3.75, "y":4}, {"label":"F", "x":4.75, "y":4}, {"label":"G", "x":5.75, "y":4}, {"label":"H", "x":6.75, "y":4}, {"label":"J", "x":7.75, "y":4}, {"label":"K", "x":8.75, "y":4}, {"label":"L", "x":9.75, "y":4}, {"label":":", "x":10.75, "y":4}, {"label":"\"", "x":11.75, "y":4}, {"x":12.75, "y":4}, {"label":"Enter", "x":13.75, "y":4, "w":1.25}, {"label":"4", "x":15.5, "y":4}, {"label":"5", "x":16.5, "y":4}, {"label":"6", "x":17.5, "y":4}, {"x":18.5, "y":4}, {"label":"Shift", "x":0, "y":5, "w":1.25}, {"x":1.25, "y":5}, {"label":"Z", "x":2.25, "y":5}, {"label":"X", "x":3.25, "y":5}, {"label":"C", "x":4.25, "y":5}, {"label":"V", "x":5.25, "y":5}, {"label":"B", "x":6.25, "y":5}, {"label":"N", "x":7.25, "y":5}, {"label":"M", "x":8.25, "y":5}, {"label":"<", "x":9.25, "y":5}, {"label":">", "x":10.25, "y":5}, {"label":"?", "x":11.25, "y":5}, {"label":"Shift", "x":12.25, "y":5, "w":1.75}, {"label":"\u2191", "x":14.25, "y":5.25}, {"label":"1", "x":15.5, "y":5}, {"label":"2", "x":16.5, "y":5}, {"label":"3", "x":17.5, "y":5}, {"label":"Enter", "x":18.5, "y":5, "h":2}, {"label":"Ctrl", "x":0, "y":6}, {"label":"Win", "x":1, "y":6}, {"label":"Alt", "x":2, "y":6}, {"x":3, "y":6, "w":6}, {"label":"Alt", "x":9, "y":6}, {"label":"Win", "x":10, "y":6}, {"label":"Menu", "x":11, "y":6}, {"label":"Ctrl", "x":12, "y":6}, {"label":"\u2190", "x":13.25, "y":6.25}, {"label":"\u2193", "x":14.25, "y":6.25}, {"label":"\u2192", "x":15.25, "y":6.25}, {"label":"0", "x":16.5, "y":6}, {"label":".", "x":17.5, "y":6}] diff --git a/keyboards/hineybush/hineyg80/rules.mk b/keyboards/hineybush/hineyg80/rules.mk index a2a5932cdc..fce764c22d 100644 --- a/keyboards/hineybush/hineyg80/rules.mk +++ b/keyboards/hineybush/hineyg80/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/hineybush/ibis/config.h b/keyboards/hineybush/ibis/config.h deleted file mode 100644 index e8601cd54b..0000000000 --- a/keyboards/hineybush/ibis/config.h +++ /dev/null @@ -1,20 +0,0 @@ -// Copyright 2022 Josh Hinnebusch (@hineybush) -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT diff --git a/keyboards/hineybush/ibis/keymaps/default/keymap.c b/keyboards/hineybush/ibis/keymaps/default/keymap.c index 697acf5392..5e8263e055 100644 --- a/keyboards/hineybush/ibis/keymaps/default/keymap.c +++ b/keyboards/hineybush/ibis/keymaps/default/keymap.c @@ -4,13 +4,6 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* - k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k17, k37, k08, k18, k09, k19, \ - k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k57, k28, k38, k29, k39, \ - k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k48, k58, k49, k59, \ - k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k77, k68, k78, k69, k79, \ - k80, k90, k81, k83, k85, k95, k86, k96, k97, k88, k98, k89, k99 \ */ - [0] = LAYOUT_all( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, KC_NUM, KC_PSLS, KC_PAST, KC_PAUS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PMNS, diff --git a/keyboards/hineybush/ibis/keymaps/default_ansi_all/keymap.c b/keyboards/hineybush/ibis/keymaps/default_ansi_all/keymap.c index fcfd4d79d3..2403e78b3a 100644 --- a/keyboards/hineybush/ibis/keymaps/default_ansi_all/keymap.c +++ b/keyboards/hineybush/ibis/keymaps/default_ansi_all/keymap.c @@ -4,13 +4,6 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* - k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k17, k37, k08, k18, k09, k19, \ - k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k57, k28, k38, k29, k39, \ - k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k56, k48, k58, k49, k59, \ - k60, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k77, k68, k78, k69, k79, \ - k80, k90, k81, k83, k85, k95, k86, k96, k97, k88, k98, k89, k99 \ */ - [0] = LAYOUT_ansi_all( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, KC_NUM, KC_PSLS, KC_PAST, KC_PAUS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PMNS, diff --git a/keyboards/hineybush/ibis/keymaps/default_iso_all/keymap.c b/keyboards/hineybush/ibis/keymaps/default_iso_all/keymap.c index 6cefad6fa3..3bbd8e2e47 100644 --- a/keyboards/hineybush/ibis/keymaps/default_iso_all/keymap.c +++ b/keyboards/hineybush/ibis/keymaps/default_iso_all/keymap.c @@ -4,13 +4,6 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* - k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k17, k37, k08, k18, k09, k19, \ - k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k57, k28, k38, k29, k39, \ - k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k48, k58, k49, k59, \ - k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k77, k68, k78, k69, k79, \ - k80, k90, k81, k83, k85, k95, k86, k96, k97, k88, k98, k89, k99 \ */ - [0] = LAYOUT_iso_all( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, KC_NUM, KC_PSLS, KC_PAST, KC_PAUS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PMNS, diff --git a/keyboards/hineybush/ibis/keymaps/via/keymap.c b/keyboards/hineybush/ibis/keymaps/via/keymap.c index d790bf4f2d..cef8b418e2 100644 --- a/keyboards/hineybush/ibis/keymaps/via/keymap.c +++ b/keyboards/hineybush/ibis/keymaps/via/keymap.c @@ -4,13 +4,6 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* - k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k17, k37, k08, k18, k09, k19, \ - k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k57, k28, k38, k29, k39, \ - k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k48, k58, k49, k59, \ - k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k77, k68, k78, k69, k79, \ - k80, k90, k81, k83, k85, k95, k86, k96, k97, k88, k98, k89, k99 \ */ - [0] = LAYOUT_all( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, KC_NUM, KC_PSLS, KC_PAST, KC_PAUS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PMNS, diff --git a/keyboards/hineybush/physix/config.h b/keyboards/hineybush/physix/config.h index 4fde85fb5e..160dcbff43 100644 --- a/keyboards/hineybush/physix/config.h +++ b/keyboards/hineybush/physix/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 /* * Keyboard Matrix Assignments @@ -39,11 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - #define BACKLIGHT_PIN B7 #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 @@ -66,51 +56,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -126,7 +78,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/hineybush/physix/info.json b/keyboards/hineybush/physix/info.json index 274f9bb725..828e8fbb4f 100644 --- a/keyboards/hineybush/physix/info.json +++ b/keyboards/hineybush/physix/info.json @@ -8,6 +8,8 @@ "pid": "0xEC81", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/hineybush/physix/rules.mk b/keyboards/hineybush/physix/rules.mk index 3ca912f6ec..0922d3d511 100644 --- a/keyboards/hineybush/physix/rules.mk +++ b/keyboards/hineybush/physix/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/hineybush/sm68/config.h b/keyboards/hineybush/sm68/config.h index a618257e18..c11c6431ce 100644 --- a/keyboards/hineybush/sm68/config.h +++ b/keyboards/hineybush/sm68/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 /* * Keyboard Matrix Assignments @@ -57,51 +52,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_EFFECT_STATIC_GRADIENT #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -117,7 +74,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/hineybush/sm68/info.json b/keyboards/hineybush/sm68/info.json index a3b9e4c051..642e7b5e07 100644 --- a/keyboards/hineybush/sm68/info.json +++ b/keyboards/hineybush/sm68/info.json @@ -8,6 +8,8 @@ "pid": "0xEC9F", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_68_ansi_split_bs_rshift": { "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Insert", "x":15.5, "y":0}, {"x":16.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15.5, "y":1}, {"x":16.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"\u2191", "x":15.5, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Ctrl", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"\u2190", "x":14.5, "y":4}, {"label":"\u2193", "x":15.5, "y":4}, {"label":"\u2192", "x":16.5, "y":4}] diff --git a/keyboards/hineybush/sm68/rules.mk b/keyboards/hineybush/sm68/rules.mk index 9c435aa07b..3414d97c20 100644 --- a/keyboards/hineybush/sm68/rules.mk +++ b/keyboards/hineybush/sm68/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # |