diff options
Diffstat (limited to 'keyboards/hineybush')
27 files changed, 53 insertions, 287 deletions
diff --git a/keyboards/hineybush/h08_ocelot/config.h b/keyboards/hineybush/h08_ocelot/config.h index 2499e4ba50..cdb768732d 100644 --- a/keyboards/hineybush/h08_ocelot/config.h +++ b/keyboards/hineybush/h08_ocelot/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 2 @@ -50,10 +49,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define LED_COMPOSE_PIN B3 //#define LED_KANA_PIN B4 -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - #define RGB_DI_PIN F1 #ifdef RGB_DI_PIN # define RGBLED_NUM 7 @@ -97,27 +92,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/hineybush/h10/config.h b/keyboards/hineybush/h10/config.h index 428e7c7905..3db2894937 100644 --- a/keyboards/hineybush/h10/config.h +++ b/keyboards/hineybush/h10/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -75,27 +74,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* Bootmagic Lite key configuration */ #define BOOTMAGIC_LITE_ROW 0 #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/hineybush/h10/info.json b/keyboards/hineybush/h10/info.json index 6570e0af49..abf9bc8345 100644 --- a/keyboards/hineybush/h10/info.json +++ b/keyboards/hineybush/h10/info.json @@ -8,6 +8,7 @@ "pid": "0xEBD8", "device_version": "0.0.1" }, + "community_layouts": ["ortho_6x4", "numpad_6x4"], "layouts": { "LAYOUT_ortho_6x4": { "layout": [ diff --git a/keyboards/hineybush/h10/rules.mk b/keyboards/hineybush/h10/rules.mk index 12b7178a79..1509243ebb 100644 --- a/keyboards/hineybush/h10/rules.mk +++ b/keyboards/hineybush/h10/rules.mk @@ -16,5 +16,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = ortho_6x4 numpad_6x4 diff --git a/keyboards/hineybush/h60/config.h b/keyboards/hineybush/h60/config.h index f2205d1121..ee124987e5 100644 --- a/keyboards/hineybush/h60/config.h +++ b/keyboards/hineybush/h60/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 diff --git a/keyboards/hineybush/h60/info.json b/keyboards/hineybush/h60/info.json index b32da796d7..a886762963 100644 --- a/keyboards/hineybush/h60/info.json +++ b/keyboards/hineybush/h60/info.json @@ -8,6 +8,7 @@ "pid": "0xEBBE", "device_version": "0.0.1" }, + "community_layouts": ["60_ansi", "60_ansi_split_bs_rshift", "60_hhkb", "60_tsangan_hhkb"], "layouts": { "LAYOUT_60_ansi": { "layout": [ diff --git a/keyboards/hineybush/h60/rules.mk b/keyboards/hineybush/h60/rules.mk index dfbde71e2b..01701e2118 100644 --- a/keyboards/hineybush/h60/rules.mk +++ b/keyboards/hineybush/h60/rules.mk @@ -17,5 +17,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output SLEEP_LED_ENABLE = yes - -LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_hhkb 60_tsangan_hhkb diff --git a/keyboards/hineybush/h65/config.h b/keyboards/hineybush/h65/config.h index f4f3900afe..4ba986dba4 100644 --- a/keyboards/hineybush/h65/config.h +++ b/keyboards/hineybush/h65/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -97,27 +96,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/hineybush/h65/info.json b/keyboards/hineybush/h65/info.json index 500843fe07..e58e073fd5 100644 --- a/keyboards/hineybush/h65/info.json +++ b/keyboards/hineybush/h65/info.json @@ -8,6 +8,7 @@ "pid": "0xE9E4", "device_version": "0.0.1" }, + "community_layouts": ["65_ansi_blocker", "65_ansi_blocker_split_bs", "65_ansi_blocker_tsangan", "65_iso_blocker", "65_iso_blocker_split_bs"], "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/hineybush/h65/rules.mk b/keyboards/hineybush/h65/rules.mk index 904686fd9c..3b061c1108 100644 --- a/keyboards/hineybush/h65/rules.mk +++ b/keyboards/hineybush/h65/rules.mk @@ -16,5 +16,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs 65_ansi_blocker_tsangan 65_iso_blocker 65_iso_blocker_split_bs diff --git a/keyboards/hineybush/h65_hotswap/config.h b/keyboards/hineybush/h65_hotswap/config.h index f4f3900afe..4ba986dba4 100644 --- a/keyboards/hineybush/h65_hotswap/config.h +++ b/keyboards/hineybush/h65_hotswap/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -97,27 +96,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/hineybush/h65_hotswap/info.json b/keyboards/hineybush/h65_hotswap/info.json index c2472e6879..1d33ce00f4 100644 --- a/keyboards/hineybush/h65_hotswap/info.json +++ b/keyboards/hineybush/h65_hotswap/info.json @@ -11,6 +11,7 @@ "layout_aliases": { "LAYOUT": "LAYOUT_all" }, + "community_layouts": ["65_ansi_blocker", "65_ansi_blocker_split_bs", "65_iso_blocker", "65_iso_blocker_split_bs"], "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/hineybush/h65_hotswap/rules.mk b/keyboards/hineybush/h65_hotswap/rules.mk index f4afd28025..3b061c1108 100644 --- a/keyboards/hineybush/h65_hotswap/rules.mk +++ b/keyboards/hineybush/h65_hotswap/rules.mk @@ -16,5 +16,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs 65_iso_blocker 65_iso_blocker_split_bs diff --git a/keyboards/hineybush/h660s/config.h b/keyboards/hineybush/h660s/config.h index ad2d13ded2..f276b11f99 100644 --- a/keyboards/hineybush/h660s/config.h +++ b/keyboards/hineybush/h660s/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -85,27 +84,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/hineybush/h75_singa/config.h b/keyboards/hineybush/h75_singa/config.h index d1a75c77be..36f18e12f9 100644 --- a/keyboards/hineybush/h75_singa/config.h +++ b/keyboards/hineybush/h75_singa/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -87,27 +86,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/hineybush/h87a/config.h b/keyboards/hineybush/h87a/config.h index 6a7920f7d3..f1bb707d79 100644 --- a/keyboards/hineybush/h87a/config.h +++ b/keyboards/hineybush/h87a/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define CONFIG_H -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 12 @@ -40,7 +39,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ @@ -49,8 +47,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/hineybush/h87a/keymaps/gam3cat/keymap.c b/keyboards/hineybush/h87a/keymaps/gam3cat/keymap.c index b3f76d60d1..76fd4abae9 100644 --- a/keyboards/hineybush/h87a/keymaps/gam3cat/keymap.c +++ b/keyboards/hineybush/h87a/keymaps/gam3cat/keymap.c @@ -44,13 +44,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Ctrl |Win|Alt | Space |RAlt |Fn |Ctrl |Lft|Dwn|Rgt| * *-----------------------------------------------------------------------* */ - [_BL] = LAYOUT_all( \ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, \ - KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, KC_RALT, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ + [_BL] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, + KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, KC_RALT, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), /*#### _WL: Workman Layer. * .-----------------------------------------------------------------------. @@ -67,13 +67,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | * *-----------------------------------------------------------------------* */ - [_WL] = LAYOUT_all( \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, KC_Q , KC_D , KC_R , KC_W , KC_B , KC_J , KC_F , KC_U , KC_P , KC_SCLN, _______, _______, _______, _______, _______, _______, \ - _______, KC_A , KC_S , KC_H , KC_T , KC_G , KC_Y , KC_N , KC_E , KC_O , KC_I , _______, _______, _______, \ - _______, _______, KC_Z , KC_X , KC_M , KC_C , KC_V , KC_K , KC_L , KC_COMM, KC_DOT , KC_SLSH, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + [_WL] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_Q , KC_D , KC_R , KC_W , KC_B , KC_J , KC_F , KC_U , KC_P , KC_SCLN, _______, _______, _______, _______, _______, _______, + _______, KC_A , KC_S , KC_H , KC_T , KC_G , KC_Y , KC_N , KC_E , KC_O , KC_I , _______, _______, _______, + _______, _______, KC_Z , KC_X , KC_M , KC_C , KC_V , KC_K , KC_L , KC_COMM, KC_DOT , KC_SLSH, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), /*#### _NL: Norman Layer. * .-----------------------------------------------------------------------. @@ -90,13 +90,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | * *-----------------------------------------------------------------------* */ - [_NL] = LAYOUT_all( \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, KC_Q , KC_W , KC_D , KC_F , KC_K , KC_J , KC_U , KC_R , KC_L , KC_SCLN, _______, _______, _______, _______, _______, _______, \ - _______, KC_A , KC_S , KC_E , KC_T , KC_G , KC_Y , KC_N , KC_I , KC_O , KC_H , _______, _______, _______, \ - _______, _______, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_P , KC_M , KC_COMM, KC_DOT , KC_SLSH, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + [_NL] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_Q , KC_W , KC_D , KC_F , KC_K , KC_J , KC_U , KC_R , KC_L , KC_SCLN, _______, _______, _______, _______, _______, _______, + _______, KC_A , KC_S , KC_E , KC_T , KC_G , KC_Y , KC_N , KC_I , KC_O , KC_H , _______, _______, _______, + _______, _______, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_P , KC_M , KC_COMM, KC_DOT , KC_SLSH, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), /*#### _DL: Dvorak Layer. * .-----------------------------------------------------------------------. @@ -113,13 +113,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | * *-----------------------------------------------------------------------* */ - [_DL] = LAYOUT_all( \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______, _______, _______, _______, _______, \ - _______, KC_QUOT, KC_COMM, KC_DOT , KC_P , KC_Y , KC_F , KC_G , KC_C , KC_R , KC_L , KC_SLSH, KC_EQL , _______, _______, _______, _______, \ - _______, KC_A , KC_O , KC_E , KC_U , KC_I , KC_D , KC_H , KC_T , KC_N , KC_S , KC_MINS, _______, _______, \ - _______, _______, KC_SCLN, KC_Q , KC_J , KC_K , KC_X , KC_B , KC_M , KC_W , KC_V , KC_Z , _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + [_DL] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______, _______, _______, _______, _______, + _______, KC_QUOT, KC_COMM, KC_DOT , KC_P , KC_Y , KC_F , KC_G , KC_C , KC_R , KC_L , KC_SLSH, KC_EQL , _______, _______, _______, _______, + _______, KC_A , KC_O , KC_E , KC_U , KC_I , KC_D , KC_H , KC_T , KC_N , KC_S , KC_MINS, _______, _______, + _______, _______, KC_SCLN, KC_Q , KC_J , KC_K , KC_X , KC_B , KC_M , KC_W , KC_V , KC_Z , _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), /*#### _CL: Colmak Layer. * .-----------------------------------------------------------------------. @@ -136,13 +136,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | * *-----------------------------------------------------------------------* */ - [_CL] = LAYOUT_all( \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, KC_Q , KC_W , KC_F , KC_P , KC_G , KC_J , KC_L , KC_U , KC_Y , KC_SCLN, _______, _______, _______, _______, _______, _______, \ - _______, KC_A , KC_R , KC_S , KC_T , KC_D , KC_H , KC_N , KC_E , KC_I , KC_O , _______, _______, _______, \ - _______, _______, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_K , KC_M , KC_COMM, KC_DOT , KC_SLSH, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + [_CL] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_Q , KC_W , KC_F , KC_P , KC_G , KC_J , KC_L , KC_U , KC_Y , KC_SCLN, _______, _______, _______, _______, _______, _______, + _______, KC_A , KC_R , KC_S , KC_T , KC_D , KC_H , KC_N , KC_E , KC_I , KC_O , _______, _______, _______, + _______, _______, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_K , KC_M , KC_COMM, KC_DOT , KC_SLSH, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), /*#### _FL: Function Layer. * .-----------------------------------------------------------------------. @@ -159,13 +159,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | SP4 | |Fn | |WBk| |WFw| * *-----------------------------------------------------------------------* */ - [_FL] = LAYOUT_all( \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE, KC_VOLD, KC_VOLU, XXXXXXX, XXXXXXX, XXXXXXX, \ - KC_WEB, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - MO(_AL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, \ - XXXXXXX, XXXXXXX, KC_MENU, KC_SP4, XXXXXXX, _______, XXXXXXX, XXXXXXX, KC_WBAK, XXXXXXX, KC_WFWD \ + [_FL] = LAYOUT_all( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE, KC_VOLD, KC_VOLU, XXXXXXX, XXXXXXX, XXXXXXX, + KC_WEB, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + MO(_AL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, + XXXXXXX, XXXXXXX, KC_MENU, KC_SP4, XXXXXXX, _______, XXXXXXX, XXXXXXX, KC_WBAK, XXXXXXX, KC_WFWD ), /*#### _AL: Adjust Layer - Keymap select, LED backlight, and Dynamic Macro settings. * .-----------------------------------------------------------------------. @@ -182,13 +182,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | |Fn | | | | | * *-----------------------------------------------------------------------* */ - [_AL] = LAYOUT_all( \ - QK_BOOT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - QMK_REV, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, XXXXXXX, BL_TOGG, BL_DOWN, BL_UP, XXXXXXX, XXXXXXX, XXXXXXX, KC_DMR1, KC_DMP1, \ - _______, DF(_BL), DF(_WL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_DMRS, KC_DMR2, KC_DMP2, \ - XXXXXXX, XXXXXXX, XXXXXXX, DF(_DL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, DF(_CL), XXXXXXX, DF(_BL), DF(_NL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \ + [_AL] = LAYOUT_all( + QK_BOOT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + QMK_REV, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, XXXXXXX, BL_TOGG, BL_DOWN, BL_UP, XXXXXXX, XXXXXXX, XXXXXXX, KC_DMR1, KC_DMP1, + _______, DF(_BL), DF(_WL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_DMRS, KC_DMR2, KC_DMP2, + XXXXXXX, XXXXXXX, XXXXXXX, DF(_DL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, DF(_CL), XXXXXXX, DF(_BL), DF(_NL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX ), }; diff --git a/keyboards/hineybush/h88/config.h b/keyboards/hineybush/h88/config.h index 241df48ecf..80e199994b 100644 --- a/keyboards/hineybush/h88/config.h +++ b/keyboards/hineybush/h88/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 12 @@ -40,7 +39,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ @@ -49,8 +47,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/hineybush/hbcp/config.h b/keyboards/hineybush/hbcp/config.h index 8ed0f61528..aa0deaa523 100644 --- a/keyboards/hineybush/hbcp/config.h +++ b/keyboards/hineybush/hbcp/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -70,8 +69,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/hineybush/hbcp/keymaps/hiney/keymap.c b/keyboards/hineybush/hbcp/keymaps/hiney/keymap.c index 018d1eea14..5f1d7700f6 100644 --- a/keyboards/hineybush/hbcp/keymaps/hiney/keymap.c +++ b/keyboards/hineybush/hbcp/keymaps/hiney/keymap.c @@ -25,13 +25,6 @@ enum custom_keycodes { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_wkl( /* Base */ - - /*K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, K017, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013, K114, K115, K116, K117, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, K315, K316, K317, \ - K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, \ - K500, K501, K505, K510, K511, K512, K513, K514, K515, K516, K517 \*/ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, KC_PGUP, KC_PGDN, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_LNUM, KC_PSLS, KC_PAST, KC_PAUS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, diff --git a/keyboards/hineybush/hineyg80/config.h b/keyboards/hineybush/hineyg80/config.h index 3d9b59bc55..40104daf1c 100644 --- a/keyboards/hineybush/hineyg80/config.h +++ b/keyboards/hineybush/hineyg80/config.h @@ -1,6 +1,5 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 12 @@ -18,8 +17,6 @@ #define LED_CAPS_LOCK_PIN B6 #define LED_SCROLL_LOCK_PIN B5 -/* number of backlight levels */ - #ifdef BACKLIGHT_PIN #define BACKLIGHT_LEVELS 3 #endif diff --git a/keyboards/hineybush/ibis/keymaps/default/keymap.c b/keyboards/hineybush/ibis/keymaps/default/keymap.c index 697acf5392..5e8263e055 100644 --- a/keyboards/hineybush/ibis/keymaps/default/keymap.c +++ b/keyboards/hineybush/ibis/keymaps/default/keymap.c @@ -4,13 +4,6 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* - k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k17, k37, k08, k18, k09, k19, \ - k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k57, k28, k38, k29, k39, \ - k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k48, k58, k49, k59, \ - k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k77, k68, k78, k69, k79, \ - k80, k90, k81, k83, k85, k95, k86, k96, k97, k88, k98, k89, k99 \ */ - [0] = LAYOUT_all( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, KC_NUM, KC_PSLS, KC_PAST, KC_PAUS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PMNS, diff --git a/keyboards/hineybush/ibis/keymaps/default_ansi_all/keymap.c b/keyboards/hineybush/ibis/keymaps/default_ansi_all/keymap.c index fcfd4d79d3..2403e78b3a 100644 --- a/keyboards/hineybush/ibis/keymaps/default_ansi_all/keymap.c +++ b/keyboards/hineybush/ibis/keymaps/default_ansi_all/keymap.c @@ -4,13 +4,6 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* - k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k17, k37, k08, k18, k09, k19, \ - k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k57, k28, k38, k29, k39, \ - k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k56, k48, k58, k49, k59, \ - k60, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k77, k68, k78, k69, k79, \ - k80, k90, k81, k83, k85, k95, k86, k96, k97, k88, k98, k89, k99 \ */ - [0] = LAYOUT_ansi_all( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, KC_NUM, KC_PSLS, KC_PAST, KC_PAUS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PMNS, diff --git a/keyboards/hineybush/ibis/keymaps/default_iso_all/keymap.c b/keyboards/hineybush/ibis/keymaps/default_iso_all/keymap.c index 6cefad6fa3..3bbd8e2e47 100644 --- a/keyboards/hineybush/ibis/keymaps/default_iso_all/keymap.c +++ b/keyboards/hineybush/ibis/keymaps/default_iso_all/keymap.c @@ -4,13 +4,6 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* - k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k17, k37, k08, k18, k09, k19, \ - k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k57, k28, k38, k29, k39, \ - k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k48, k58, k49, k59, \ - k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k77, k68, k78, k69, k79, \ - k80, k90, k81, k83, k85, k95, k86, k96, k97, k88, k98, k89, k99 \ */ - [0] = LAYOUT_iso_all( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, KC_NUM, KC_PSLS, KC_PAST, KC_PAUS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PMNS, diff --git a/keyboards/hineybush/ibis/keymaps/via/keymap.c b/keyboards/hineybush/ibis/keymaps/via/keymap.c index d790bf4f2d..cef8b418e2 100644 --- a/keyboards/hineybush/ibis/keymaps/via/keymap.c +++ b/keyboards/hineybush/ibis/keymaps/via/keymap.c @@ -4,13 +4,6 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* - k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k17, k37, k08, k18, k09, k19, \ - k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k57, k28, k38, k29, k39, \ - k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k48, k58, k49, k59, \ - k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k77, k68, k78, k69, k79, \ - k80, k90, k81, k83, k85, k95, k86, k96, k97, k88, k98, k89, k99 \ */ - [0] = LAYOUT_all( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, KC_NUM, KC_PSLS, KC_PAST, KC_PAUS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PMNS, diff --git a/keyboards/hineybush/physix/config.h b/keyboards/hineybush/physix/config.h index 4fde85fb5e..d10615ee53 100644 --- a/keyboards/hineybush/physix/config.h +++ b/keyboards/hineybush/physix/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -91,27 +90,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/hineybush/sm68/config.h b/keyboards/hineybush/sm68/config.h index a618257e18..62d9e78cf2 100644 --- a/keyboards/hineybush/sm68/config.h +++ b/keyboards/hineybush/sm68/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -82,27 +81,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ |