diff options
Diffstat (limited to 'keyboards/helix/pico/keymaps')
| -rw-r--r-- | keyboards/helix/pico/keymaps/biacco/keymap.c | 35 | ||||
| -rw-r--r-- | keyboards/helix/pico/keymaps/biacco/rules.mk | 6 | ||||
| -rw-r--r-- | keyboards/helix/pico/keymaps/default/keymap.c | 195 | ||||
| -rw-r--r-- | keyboards/helix/pico/keymaps/default/readme.md | 6 | ||||
| -rw-r--r-- | keyboards/helix/pico/keymaps/default/readme_jp.md | 14 | ||||
| -rw-r--r-- | keyboards/helix/pico/keymaps/default/rules.mk | 13 | ||||
| -rw-r--r-- | keyboards/helix/pico/keymaps/mtei/keymap.c | 163 | ||||
| -rw-r--r-- | keyboards/helix/pico/keymaps/mtei/rules.mk | 6 |
8 files changed, 85 insertions, 353 deletions
diff --git a/keyboards/helix/pico/keymaps/biacco/keymap.c b/keyboards/helix/pico/keymaps/biacco/keymap.c index a1d041c022..aa196c7e6a 100644 --- a/keyboards/helix/pico/keymaps/biacco/keymap.c +++ b/keyboards/helix/pico/keymaps/biacco/keymap.c @@ -1,24 +1,19 @@ +/* Copyright 2018 Biacco42 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #include QMK_KEYBOARD_H -#include "bootloader.h" -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#include "split_util.h" -#endif -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif - -extern keymap_config_t keymap_config; - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - -extern uint8_t is_master; // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. diff --git a/keyboards/helix/pico/keymaps/biacco/rules.mk b/keyboards/helix/pico/keymaps/biacco/rules.mk index 993ade2673..d971359461 100644 --- a/keyboards/helix/pico/keymaps/biacco/rules.mk +++ b/keyboards/helix/pico/keymaps/biacco/rules.mk @@ -10,10 +10,8 @@ AUDIO_ENABLE = yes # Audio output on port B5 LTO_ENABLE = no # if firmware size over limit, try this option # Helix Spacific Build Options -# you can uncomment and edit follows 6 Variables -# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。 -# OLED_ENABLE = no # OLED_ENABLE -# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c" +# you can uncomment and edit follows 4 Variables +# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。 # LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) # LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) LED_ANIMATIONS = no # LED animations diff --git a/keyboards/helix/pico/keymaps/default/keymap.c b/keyboards/helix/pico/keymaps/default/keymap.c index 7cc3cb586e..11ee30258c 100644 --- a/keyboards/helix/pico/keymaps/default/keymap.c +++ b/keyboards/helix/pico/keymaps/default/keymap.c @@ -1,24 +1,25 @@ +/* Copyright 2018 MakotoKurauchi + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #include QMK_KEYBOARD_H -#include "bootloader.h" -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#include "split_util.h" -#endif -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif - #ifdef RGBLIGHT_ENABLE //Following line allows macro to read current RGB settings extern rgblight_config_t rgblight_config; #endif -extern uint8_t is_master; - // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them @@ -66,11 +67,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-------------------------------------------------------------------------------------------------' */ -[_QWERTY] = LAYOUT( \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ - ADJUST, KC_ESC, KC_LALT, KC_LGUI, EISU, LOWER, KC_SPC, KC_SPC, RAISE, KANA, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +[_QWERTY] = LAYOUT( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + ADJUST, KC_ESC, KC_LALT, KC_LGUI, EISU, LOWER, KC_SPC, KC_SPC, RAISE, KANA, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT ), /* Colemak * ,-----------------------------------------. ,-----------------------------------------. @@ -83,11 +84,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right | * `-------------------------------------------------------------------------------------------------' */ - [_COLEMAK] = LAYOUT( \ - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ - KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ - ADJUST, KC_ESC, KC_LALT, KC_LGUI, EISU, LOWER, KC_SPC, KC_SPC, RAISE, KANA, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + [_COLEMAK] = LAYOUT( + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + ADJUST, KC_ESC, KC_LALT, KC_LGUI, EISU, LOWER, KC_SPC, KC_SPC, RAISE, KANA, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT ), /* Dvorak @@ -101,11 +102,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right | * `-------------------------------------------------------------------------------------------------' */ - [_DVORAK] = LAYOUT( \ - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ - KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \ - ADJUST, KC_ESC, KC_LALT, KC_LGUI, EISU, LOWER, KC_SPC, KC_SPC, RAISE, KANA, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + [_DVORAK] = LAYOUT( + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, + KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , + ADJUST, KC_ESC, KC_LALT, KC_LGUI, EISU, LOWER, KC_SPC, KC_SPC, RAISE, KANA, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT ), /* Lower @@ -119,11 +120,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | Next | Vol- | Vol+ | Play | * `-------------------------------------------------------------------------------------------------' */ - [_LOWER] = LAYOUT( \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \ - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, KC_HOME, KC_END, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + [_LOWER] = LAYOUT( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, KC_HOME, KC_END, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY ), /* Raise @@ -137,11 +138,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | Next | Vol- | Vol+ | Play | * `-------------------------------------------------------------------------------------------------' */ - [_RAISE] = LAYOUT( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, KC_PGDN, KC_PGUP, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + [_RAISE] = LAYOUT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, KC_PGDN, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY ), /* Adjust (Lower + Raise) @@ -155,11 +156,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | MODE | HUE- | SAT- | VAL- | * `-------------------------------------------------------------------------------------------------' */ - [_ADJUST] = LAYOUT( \ - _______, RESET, RGBRST, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, AU_ON, AU_OFF, MU_TOG, MU_MOD, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ - _______, CK_TOGG, CK_RST, CK_UP, CK_DOWN, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD \ + [_ADJUST] = LAYOUT( + _______, RESET, RGBRST, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, AU_ON, AU_OFF, MU_TOG, MU_MOD, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, + _______, CK_TOGG, CK_RST, CK_UP, CK_DOWN, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD ) }; @@ -334,10 +335,6 @@ void matrix_init_user(void) { #ifdef RGBLIGHT_ENABLE RGB_current_mode = rgblight_config.mode; #endif - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - iota_gfx_init(!has_usb()); // turns on the display - #endif } @@ -365,105 +362,3 @@ void music_scale_user(void) } #endif - - -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED - -void matrix_scan_user(void) { - iota_gfx_task(); // this is what updates the display continuously -} - -void matrix_update(struct CharacterMatrix *dest, - const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -//assign the right code to your layers for OLED display -#define L_BASE 0 -#define L_LOWER (1<<_LOWER) -#define L_RAISE (1<<_RAISE) -#define L_ADJUST (1<<_ADJUST) -#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER) - -static void render_logo(struct CharacterMatrix *matrix) { - - static char logo[]={ - 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, - 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, - 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, - 0}; - matrix_write(matrix, logo); - //matrix_write_P(&matrix, PSTR(" Split keyboard kit")); -} - - - -void render_status(struct CharacterMatrix *matrix) { - - // Render to mode icon - static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; - if(keymap_config.swap_lalt_lgui==false){ - matrix_write(matrix, logo[0][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[0][1]); - }else{ - matrix_write(matrix, logo[1][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[1][1]); - } - - // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below - char buf[40]; - snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); - matrix_write_P(matrix, PSTR("\nLayer: ")); - switch (layer_state) { - case L_BASE: - matrix_write_P(matrix, PSTR("Default")); - break; - case L_RAISE: - matrix_write_P(matrix, PSTR("Raise")); - break; - case L_LOWER: - matrix_write_P(matrix, PSTR("Lower")); - break; - case L_ADJUST: - case L_ADJUST_TRI: - matrix_write_P(matrix, PSTR("Adjust")); - break; - default: - matrix_write(matrix, buf); - } - - // Host Keyboard LED Status - char led[40]; - snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", - (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", - (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); - matrix_write(matrix, led); -} - - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - -#if DEBUG_TO_SCREEN - if (debug_enable) { - return; - } -#endif - - matrix_clear(&matrix); - if(is_master){ - render_status(&matrix); - }else{ - render_logo(&matrix); - } - matrix_update(&display, &matrix); -} - -#endif diff --git a/keyboards/helix/pico/keymaps/default/readme.md b/keyboards/helix/pico/keymaps/default/readme.md index 789097021b..a6c81651a3 100644 --- a/keyboards/helix/pico/keymaps/default/readme.md +++ b/keyboards/helix/pico/keymaps/default/readme.md @@ -96,10 +96,8 @@ see `qmk_firmware/keyboards/helix/pico/keymaps/default/rules.mk` ``` # Helix Spacific Build Options -# you can uncomment and edit follows 6 Variables -# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。 -# OLED_ENABLE = no # OLED_ENABLE -# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c" +# you can uncomment and edit follows 4 Variables +# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。 # LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) # LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) # LED_ANIMATIONS = yes # LED animations diff --git a/keyboards/helix/pico/keymaps/default/readme_jp.md b/keyboards/helix/pico/keymaps/default/readme_jp.md index 28594dafcb..73f97ad9a6 100644 --- a/keyboards/helix/pico/keymaps/default/readme_jp.md +++ b/keyboards/helix/pico/keymaps/default/readme_jp.md @@ -58,16 +58,13 @@ ## カスタマイズ -オプションの OLED をつけたり、 RGB バックライトまたは、RGB Underglow をつけた場合は、 `qmk_firmware/keyboards/helix/pico/keymaps/default/rules.mk` の以下の部分を編集して機能を有効化してください。 ``` # Helix Spacific Build Options -# you can uncomment and edit follows 6 Variables -# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。 -# OLED_ENABLE = no # OLED_ENABLE -# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c" +# you can uncomment and edit follows 4 Variables +# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。 # LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) # LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) # LED_ANIMATIONS = yes # LED animations @@ -89,13 +86,6 @@ rules.mk の下記の部分を編集して no を yes に変更してくださ LED_UNDERGLOW_ENABLE = yes # LED underglow (Enable WS2812 RGB underlight.) ``` -## OLEDを有効にする - -rules.mk の下記の部分を編集して no を yes に変更してください。 -``` -OLED_ENABLE = yes # OLED_ENABLE -``` - ## iPad/iPhoneサポートを有効にする。 rules.mk の下記の部分を編集して no を yes に変更してください。 diff --git a/keyboards/helix/pico/keymaps/default/rules.mk b/keyboards/helix/pico/keymaps/default/rules.mk index 8a4a0df28e..9a29406c17 100644 --- a/keyboards/helix/pico/keymaps/default/rules.mk +++ b/keyboards/helix/pico/keymaps/default/rules.mk @@ -1,19 +1,10 @@ -# QMK Standard Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -# See TOP/keyboards/helix/rules.mk for a list of options that can be set. -# See TOP/docs/config_options.md for more information. -# EXTRAKEY_ENABLE = yes # Audio control and System control AUDIO_ENABLE = yes # Audio output LTO_ENABLE = no # if firmware size over limit, try this option # Helix Spacific Build Options -# you can uncomment and edit follows 6 Variables -# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。 -# OLED_ENABLE = no # OLED_ENABLE -# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c" +# you can uncomment and edit follows 4 Variables +# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。 # LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) # LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) # LED_ANIMATIONS = yes # LED animations diff --git a/keyboards/helix/pico/keymaps/mtei/keymap.c b/keyboards/helix/pico/keymaps/mtei/keymap.c index 728ef0eb5f..58684be497 100644 --- a/keyboards/helix/pico/keymaps/mtei/keymap.c +++ b/keyboards/helix/pico/keymaps/mtei/keymap.c @@ -1,31 +1,23 @@ +/* Copyright 2018 mtei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #include QMK_KEYBOARD_H -#include "bootloader.h" -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#include "split_util.h" -#endif -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif -#ifdef CONSOLE_ENABLE - #include <print.h> -#endif #define LAYOUT_wrapper(...) LAYOUT(__VA_ARGS__) #define kc5(a,b,c,d,e) KC_##a, KC_##b, KC_##c, KC_##d, KC_##e -extern keymap_config_t keymap_config; - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - -extern uint8_t is_master; - // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them @@ -373,10 +365,6 @@ void matrix_init_user(void) { #ifdef AUDIO_ENABLE startup_user(); #endif - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - iota_gfx_init(!has_usb()); // turns on the display - #endif } @@ -404,124 +392,3 @@ void music_scale_user(void) } #endif - - -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED - -void matrix_scan_user(void) { - iota_gfx_task(); // this is what updates the display continuously -} - -void matrix_update(struct CharacterMatrix *dest, - const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -static void render_logo(struct CharacterMatrix *matrix) { - - static char logo[]={ - 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, - 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, - 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, - 0}; - matrix_write(matrix, logo); -#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_ANIMATIONS) - char buf[30]; - if(rgblight_config.enable) { - snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ", - rgblight_config.mode, - rgblight_config.hue/RGBLIGHT_HUE_STEP, - rgblight_config.sat/RGBLIGHT_SAT_STEP, - rgblight_config.val/RGBLIGHT_VAL_STEP); - matrix_write(matrix, buf); - } -#endif - //matrix_write_P(&matrix, PSTR(" Split keyboard kit")); -} - -static const char Qwerty_name[] PROGMEM = " Qwerty"; -static const char Colemak_name[] PROGMEM = " Colemak"; -static const char Dvorak_name[] PROGMEM = " Dvorak"; -static const char Eucalyn_name[] PROGMEM = " Eucalyn"; - -static const char NumL_name[] PROGMEM = ":NumL"; -static const char NumR_name[] PROGMEM = ":NumR"; -static const char Lower_name[] PROGMEM = ":Func"; -static const char Raise_name[] PROGMEM = ":Extra"; -static const char Adjust_name[] PROGMEM = ":Adjust"; - -static const char *layer_names[] = { - [_QWERTY] = Qwerty_name, - [_COLEMAK] = Colemak_name, - [_DVORAK] = Dvorak_name, - [_EUCALYN] = Eucalyn_name, - - [_NUML] = NumL_name, - [_NUMR] = NumR_name, - [_LOWER] = Lower_name, - [_RAISE] = Raise_name, - [_ADJUST] = Adjust_name -}; - -void render_status(struct CharacterMatrix *matrix) { - - // Render to mode icon - static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; - if(keymap_config.swap_lalt_lgui==false){ - matrix_write(matrix, logo[0][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[0][1]); - }else{ - matrix_write(matrix, logo[1][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[1][1]); - } - - // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below - int name_num; - uint32_t lstate; - matrix_write_P(matrix, layer_names[current_default_layer]); - matrix_write_P(matrix, PSTR("\n")); - for( lstate = layer_state, name_num = 0; - lstate && name_num < sizeof(layer_names)/sizeof(char *); - lstate >>=1, name_num++ ) { - if( (lstate & 1) != 0 ) { - if( layer_names[name_num] ) { - matrix_write_P(matrix, layer_names[name_num]); - } - } - } - - // Host Keyboard LED Status - char led[40]; - snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", - (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", - (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); - matrix_write(matrix, led); -} - - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - -#if DEBUG_TO_SCREEN - if (debug_enable) { - return; - } -#endif - - matrix_clear(&matrix); - if(is_master){ - render_status(&matrix); - }else{ - render_logo(&matrix); - } - matrix_update(&display, &matrix); -} - -#endif diff --git a/keyboards/helix/pico/keymaps/mtei/rules.mk b/keyboards/helix/pico/keymaps/mtei/rules.mk index 05a60f67d5..413d0519d6 100644 --- a/keyboards/helix/pico/keymaps/mtei/rules.mk +++ b/keyboards/helix/pico/keymaps/mtei/rules.mk @@ -10,10 +10,8 @@ AUDIO_ENABLE = yes # Audio output on port B5 LTO_ENABLE = no # if firmware size over limit, try this option # Helix Spacific Build Options -# you can uncomment and edit follows 6 Variables -# jp: 以下の6つの変数を必要に応じて編集し、コメントアウトをはずします。 -# OLED_ENABLE = no # OLED_ENABLE -# LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c" +# you can uncomment and edit follows 4 Variables +# jp: 以下の4つの変数を必要に応じて編集し、コメントアウトをはずします。 # LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) # LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) # LED_ANIMATIONS = yes # LED animations |