diff options
Diffstat (limited to 'keyboards/handwired')
781 files changed, 1290 insertions, 6137 deletions
diff --git a/keyboards/handwired/108key_trackpoint/config.h b/keyboards/handwired/108key_trackpoint/config.h index fccdf6424c..5887401a3a 100644 --- a/keyboards/handwired/108key_trackpoint/config.h +++ b/keyboards/handwired/108key_trackpoint/config.h @@ -1,9 +1,5 @@ #pragma once -#include "config_common.h" - -#define MATRIX_ROWS 8 -#define MATRIX_COLS 23 #ifdef PS2_DRIVER_USART #define PS2_CLOCK_PIN D5 @@ -47,7 +43,5 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -#define DEBOUNCE 5 - #define LOCKING_SUPPORT_ENABLE #define LOCKING_RESYNC_ENABLE diff --git a/keyboards/handwired/108key_trackpoint/info.json b/keyboards/handwired/108key_trackpoint/info.json index a652ee74a9..54233290e5 100644 --- a/keyboards/handwired/108key_trackpoint/info.json +++ b/keyboards/handwired/108key_trackpoint/info.json @@ -8,6 +8,8 @@ "pid": "0x5678", "device_version": "0.0.1" }, + "processor": "at90usb1286", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/108key_trackpoint/rules.mk b/keyboards/handwired/108key_trackpoint/rules.mk index 24f1d9b652..acdf7bf393 100644 --- a/keyboards/handwired/108key_trackpoint/rules.mk +++ b/keyboards/handwired/108key_trackpoint/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/10k/config.h b/keyboards/handwired/10k/config.h index 4ec6d94128..f8255691a0 100644 --- a/keyboards/handwired/10k/config.h +++ b/keyboards/handwired/10k/config.h @@ -15,7 +15,6 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -#include "config_common.h" /* Enables This makes it easier for fast typists to use dual-function keys */ #define PERMISSIVE_HOLD diff --git a/keyboards/handwired/10k/info.json b/keyboards/handwired/10k/info.json index 7601788ddc..4b35ab4df9 100644 --- a/keyboards/handwired/10k/info.json +++ b/keyboards/handwired/10k/info.json @@ -2,7 +2,6 @@ "keyboard_name": "10k", "maintainer": "Nabos", "manufacturer": "Nabos", - "debounce": 5, "diode_direction": "COL2ROW", "matrix_pins": { "cols": ["C6", "D7", "E6", "B4", "B5"], @@ -24,6 +23,8 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layout_aliases": { "LAYOUT": "LAYOUT_split_1x5" }, diff --git a/keyboards/handwired/10k/rules.mk b/keyboards/handwired/10k/rules.mk index af5f432a63..b4310ab72a 100644 --- a/keyboards/handwired/10k/rules.mk +++ b/keyboards/handwired/10k/rules.mk @@ -1,8 +1,2 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - SPLIT_KEYBOARD = yes LTO_ENABLE = yes diff --git a/keyboards/handwired/2x5keypad/config.h b/keyboards/handwired/2x5keypad/config.h index aec6f6f5f6..10e2265749 100644 --- a/keyboards/handwired/2x5keypad/config.h +++ b/keyboards/handwired/2x5keypad/config.h @@ -1,10 +1,5 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 5 /* key matrix pins */ #define MATRIX_ROW_PINS { B3, B2 } @@ -13,9 +8,6 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/2x5keypad/info.json b/keyboards/handwired/2x5keypad/info.json index 72b5e185b7..7267d48672 100644 --- a/keyboards/handwired/2x5keypad/info.json +++ b/keyboards/handwired/2x5keypad/info.json @@ -8,6 +8,8 @@ "pid": "0x2020", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/2x5keypad/keymaps/default_tapdance/keymap.c b/keyboards/handwired/2x5keypad/keymaps/default_tapdance/keymap.c index c70ecd5562..945613f987 100644 --- a/keyboards/handwired/2x5keypad/keymaps/default_tapdance/keymap.c +++ b/keyboards/handwired/2x5keypad/keymaps/default_tapdance/keymap.c @@ -49,48 +49,48 @@ void send_french_unicode_char(uint8_t count, uint32_t once, uint32_t twice) register_unicode(twice); } -void dance_a_q(qk_tap_dance_state_t *state, void *user_data) +void dance_a_q(tap_dance_state_t *state, void *user_data) { send_french_unicode_char(state->count, FR_A_GRAVE, FR_L_QUOTE); } -void dance_e_q(qk_tap_dance_state_t *state, void *user_data) +void dance_e_q(tap_dance_state_t *state, void *user_data) { send_french_unicode_char(state->count, FR_E_AIGU, FR_R_QUOTE); } -void dance_e_u(qk_tap_dance_state_t *state, void *user_data) +void dance_e_u(tap_dance_state_t *state, void *user_data) { send_french_unicode_char(state->count, FR_E_GRAVE, FR_U_GRAVE); } -void dance_e_e(qk_tap_dance_state_t *state, void *user_data) +void dance_e_e(tap_dance_state_t *state, void *user_data) { send_french_unicode_char(state->count, FR_E_HAT, FR_E_UMLAUT); } -void dance_a_y(qk_tap_dance_state_t *state, void *user_data) +void dance_a_y(tap_dance_state_t *state, void *user_data) { send_french_unicode_char(state->count, FR_A_HAT, FR_Y_UMLAUT); } -void dance_i_i(qk_tap_dance_state_t *state, void *user_data) +void dance_i_i(tap_dance_state_t *state, void *user_data) { send_french_unicode_char(state->count, FR_I_HAT, FR_I_UMLAUT); } -void dance_o_c(qk_tap_dance_state_t *state, void *user_data) +void dance_o_c(tap_dance_state_t *state, void *user_data) { send_french_unicode_char(state->count, FR_O_HAT, FR_C_CIRCUM); } -void dance_u_u(qk_tap_dance_state_t *state, void *user_data) +void dance_u_u(tap_dance_state_t *state, void *user_data) { send_french_unicode_char(state->count, FR_U_HAT, FR_U_UMLAUT); } /* Define the tap dance actions for the french characters */ -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { [A_Q] = ACTION_TAP_DANCE_FN(dance_a_q), [E_Q] = ACTION_TAP_DANCE_FN(dance_e_q), [E_U] = ACTION_TAP_DANCE_FN(dance_e_u), diff --git a/keyboards/handwired/2x5keypad/rules.mk b/keyboards/handwired/2x5keypad/rules.mk index 08870622a1..81d4ba4f3b 100644 --- a/keyboards/handwired/2x5keypad/rules.mk +++ b/keyboards/handwired/2x5keypad/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/3dfoxc/config.h b/keyboards/handwired/3dfoxc/config.h index a0fd24c136..9f08703b6d 100644 --- a/keyboards/handwired/3dfoxc/config.h +++ b/keyboards/handwired/3dfoxc/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 /* * Keyboard Matrix Assignments diff --git a/keyboards/handwired/3dfoxc/info.json b/keyboards/handwired/3dfoxc/info.json index aa8875e0dd..dfd4e8d4f0 100644 --- a/keyboards/handwired/3dfoxc/info.json +++ b/keyboards/handwired/3dfoxc/info.json @@ -8,6 +8,8 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/3dfoxc/rules.mk b/keyboards/handwired/3dfoxc/rules.mk index 168a617754..c6b71a4aaa 100644 --- a/keyboards/handwired/3dfoxc/rules.mk +++ b/keyboards/handwired/3dfoxc/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/3dortho14u/rev1/config.h b/keyboards/handwired/3dortho14u/rev1/config.h deleted file mode 100644 index d78fd0a7f8..0000000000 --- a/keyboards/handwired/3dortho14u/rev1/config.h +++ /dev/null @@ -1,6 +0,0 @@ -// Copyright 2022 Xiao (@xia0) -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -#include "config_common.h" diff --git a/keyboards/handwired/3dortho14u/rev1/info.json b/keyboards/handwired/3dortho14u/rev1/info.json index 2c8e229c02..9179bd3a1b 100644 --- a/keyboards/handwired/3dortho14u/rev1/info.json +++ b/keyboards/handwired/3dortho14u/rev1/info.json @@ -5,7 +5,6 @@ "maintainer": "xia0", "processor": "atmega32u4", "bootloader": "atmel-dfu", - "debounce": 5, "diode_direction": "COL2ROW", "features": { "audio": false, diff --git a/keyboards/handwired/3dortho14u/rev2/config.h b/keyboards/handwired/3dortho14u/rev2/config.h deleted file mode 100644 index d78fd0a7f8..0000000000 --- a/keyboards/handwired/3dortho14u/rev2/config.h +++ /dev/null @@ -1,6 +0,0 @@ -// Copyright 2022 Xiao (@xia0) -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -#include "config_common.h" diff --git a/keyboards/handwired/3dortho14u/rev2/info.json b/keyboards/handwired/3dortho14u/rev2/info.json index 28986f295e..499d8603ce 100644 --- a/keyboards/handwired/3dortho14u/rev2/info.json +++ b/keyboards/handwired/3dortho14u/rev2/info.json @@ -5,7 +5,6 @@ "maintainer": "xia0", "processor": "atmega32u4", "bootloader": "atmel-dfu", - "debounce": 5, "diode_direction": "COL2ROW", "features": { "audio": false, diff --git a/keyboards/handwired/3dp660/config.h b/keyboards/handwired/3dp660/config.h index eaae958e4d..c2effa2e46 100644 --- a/keyboards/handwired/3dp660/config.h +++ b/keyboards/handwired/3dp660/config.h @@ -17,14 +17,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" #define TAPPING_TERM 400 -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - // ROWS: Top to bottom, COLS: Left to right #define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 } @@ -33,10 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/3dp660/info.json b/keyboards/handwired/3dp660/info.json index d3bfd24550..bfe19819fe 100644 --- a/keyboards/handwired/3dp660/info.json +++ b/keyboards/handwired/3dp660/info.json @@ -8,6 +8,8 @@ "pid": "0x3660", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "halfkay", "layouts": { "LAYOUT_66_ansi": { diff --git a/keyboards/handwired/3dp660/rules.mk b/keyboards/handwired/3dp660/rules.mk index a8ac9f9320..f5b61e673c 100644 --- a/keyboards/handwired/3dp660/rules.mk +++ b/keyboards/handwired/3dp660/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/412_64/config.h b/keyboards/handwired/412_64/config.h index b32afc2033..5037639719 100644 --- a/keyboards/handwired/412_64/config.h +++ b/keyboards/handwired/412_64/config.h @@ -2,11 +2,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 8 /* * Keyboard Matrix Assignments @@ -24,49 +19,11 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -// #define BACKLIGHT_PIN C7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/412_64/info.json b/keyboards/handwired/412_64/info.json index cbf068c36a..2e8ead2950 100644 --- a/keyboards/handwired/412_64/info.json +++ b/keyboards/handwired/412_64/info.json @@ -8,6 +8,8 @@ "pid": "0x0412", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_ortho_4x16": { "layout": [ diff --git a/keyboards/handwired/412_64/rules.mk b/keyboards/handwired/412_64/rules.mk index 52d23b3122..0ad8161240 100644 --- a/keyboards/handwired/412_64/rules.mk +++ b/keyboards/handwired/412_64/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/42/config.h b/keyboards/handwired/42/config.h index 5ec89cce84..9341a90a76 100644 --- a/keyboards/handwired/42/config.h +++ b/keyboards/handwired/42/config.h @@ -1,10 +1,5 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 /* * Keyboard Matrix Assignments @@ -22,9 +17,6 @@ /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/42/info.json b/keyboards/handwired/42/info.json index 8174c0d230..16d3af1667 100644 --- a/keyboards/handwired/42/info.json +++ b/keyboards/handwired/42/info.json @@ -8,6 +8,8 @@ "pid": "0x0000", "device_version": "0.0.3" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/42/rules.mk b/keyboards/handwired/42/rules.mk index 655ce00bef..15cf817e7e 100644 --- a/keyboards/handwired/42/rules.mk +++ b/keyboards/handwired/42/rules.mk @@ -1,12 +1,6 @@ -# MCU name -MCU = atmega32u4 - # Processor frequency F_CPU = 8000000 -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/6key/config.h b/keyboards/handwired/6key/config.h index 42d7a5cb32..31b6c8888d 100644 --- a/keyboards/handwired/6key/config.h +++ b/keyboards/handwired/6key/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 3 /* pin-out */ #define MATRIX_ROW_PINS { B4, D0 } diff --git a/keyboards/handwired/6key/info.json b/keyboards/handwired/6key/info.json index b069f067c5..7d7e17b64c 100644 --- a/keyboards/handwired/6key/info.json +++ b/keyboards/handwired/6key/info.json @@ -8,6 +8,8 @@ "pid": "0x0007", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/6key/rules.mk b/keyboards/handwired/6key/rules.mk index 3cb12386cc..64e4af7ab7 100644 --- a/keyboards/handwired/6key/rules.mk +++ b/keyboards/handwired/6key/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/6macro/config.h b/keyboards/handwired/6macro/config.h index 1ec5dfb6d6..0dc61becd3 100644 --- a/keyboards/handwired/6macro/config.h +++ b/keyboards/handwired/6macro/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 3 /* pinout - DON'T CHANGE */ #define MATRIX_ROW_PINS { B3, B4 } @@ -47,13 +42,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_STATIC_GRADIENT // #define RGBLIGHT_EFFECT_RGB_TEST // #define RGBLIGHT_EFFECT_ALTERNATING -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 - - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 diff --git a/keyboards/handwired/6macro/info.json b/keyboards/handwired/6macro/info.json index 2fd8e24a5b..1d1aac48ad 100644 --- a/keyboards/handwired/6macro/info.json +++ b/keyboards/handwired/6macro/info.json @@ -8,6 +8,8 @@ "pid": "0x0037", "device_version": "0.0.1" }, + "processor": "atmega32u2", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}] diff --git a/keyboards/handwired/6macro/keymaps/osu/keymap.c b/keyboards/handwired/6macro/keymaps/osu/keymap.c index c3ee0f2ccf..50a38ce56b 100644 --- a/keyboards/handwired/6macro/keymaps/osu/keymap.c +++ b/keyboards/handwired/6macro/keymaps/osu/keymap.c @@ -25,8 +25,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-------+-------+-------' */ [0] = LAYOUT( - KC_ESC, KC_GRAVE, LT(1, KC_SPC), \ - KC_C, KC_Z, KC_X \ + KC_ESC, KC_GRAVE, LT(1, KC_SPC), + KC_C, KC_Z, KC_X ), /* LAYER 1 @@ -37,8 +37,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-------+-------+-------' */ [1] = LAYOUT( - RGB_TOG, RGB_MOD, KC_TRNS, \ - RGB_HUI, RGB_VAI, MO(2) \ + RGB_TOG, RGB_MOD, KC_TRNS, + RGB_HUI, RGB_VAI, MO(2) ), /* LAYER 2 @@ -49,8 +49,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-------+-------+-------' */ [2] = LAYOUT( - QK_BOOT, RGB_RMOD, KC_NO, \ - RGB_HUD, RGB_VAD, KC_TRNS \ + QK_BOOT, RGB_RMOD, KC_NO, + RGB_HUD, RGB_VAD, KC_TRNS ) }; diff --git a/keyboards/handwired/6macro/rules.mk b/keyboards/handwired/6macro/rules.mk index 73fc9f4951..8c51d38be3 100644 --- a/keyboards/handwired/6macro/rules.mk +++ b/keyboards/handwired/6macro/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u2 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/aball/config.h b/keyboards/handwired/aball/config.h index 6de7b03f43..cbe0c8b33e 100644 --- a/keyboards/handwired/aball/config.h +++ b/keyboards/handwired/aball/config.h @@ -17,13 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 - -#define DIRECT_PINS {{NO_PIN}} - #define ADNS9800_CS_PIN F7 #define POINTING_DEVICE_INVERT_X diff --git a/keyboards/handwired/aball/info.json b/keyboards/handwired/aball/info.json index 60f40d1935..84d277c136 100644 --- a/keyboards/handwired/aball/info.json +++ b/keyboards/handwired/aball/info.json @@ -8,6 +8,13 @@ "pid": "0xC2F0", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "matrix_pins": { + "direct": [ + [null] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/aball/rules.mk b/keyboards/handwired/aball/rules.mk index 9063957737..d5e8e6ab98 100644 --- a/keyboards/handwired/aball/rules.mk +++ b/keyboards/handwired/aball/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/acacia/config.h b/keyboards/handwired/acacia/config.h deleted file mode 100644 index e3fbdbc974..0000000000 --- a/keyboards/handwired/acacia/config.h +++ /dev/null @@ -1,23 +0,0 @@ -/* -Copyright 2022 Jens Peter Secher <jpsecher@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" - -//#define TAPPING_TERM 200 -//#define PERMISSIVE_HOLD diff --git a/keyboards/handwired/acacia/info.json b/keyboards/handwired/acacia/info.json index 7d2771ff9f..8054fff3ac 100644 --- a/keyboards/handwired/acacia/info.json +++ b/keyboards/handwired/acacia/info.json @@ -7,7 +7,6 @@ "bootloader": "atmel-dfu", "bootloader_instructions": "Enter the bootloader by using the small buttons on the PCB: press the RESET button while connected to QMK Toolbox.", "diode_direction": "COL2ROW", - "debounce": 5, "matrix_pins": { "cols": ["B4", "B3", "B2", "B1", "B0", "D2", "B6", "B7", "C7", "C6"], "rows": ["B5", "D3", "D4", "D5", "D6"] diff --git a/keyboards/handwired/aek64/config.h b/keyboards/handwired/aek64/config.h index 8382ec8cad..886b616c35 100644 --- a/keyboards/handwired/aek64/config.h +++ b/keyboards/handwired/aek64/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 // Originally made for a Teensy 2++ #define MATRIX_COL_PINS { F0, E6, E7, B0, B1, B2, B3, B4, B5, B6, D3, D0, D1, D2 } @@ -29,9 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Enable the space-cadet options */ #define RSPC_KEYS KC_RSFT, KC_TRNS, KC_PGUP #define RCPC_KEYS KC_RCTL, KC_TRNS, KC_PGDN diff --git a/keyboards/handwired/aek64/info.json b/keyboards/handwired/aek64/info.json index d0e2474d1d..42349632e2 100644 --- a/keyboards/handwired/aek64/info.json +++ b/keyboards/handwired/aek64/info.json @@ -8,6 +8,8 @@ "pid": "0x6464", "device_version": "0.0.1" }, + "processor": "at90usb1286", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [{"label":"Esc", "x":0, "y":0, "w":1.25}, {"label":"1", "x":1.25, "y":0}, {"label":"2", "x":2.25, "y":0}, {"label":"3", "x":3.25, "y":0}, {"label":"4", "x":4.25, "y":0}, {"label":"5", "x":5.25, "y":0}, {"label":"6", "x":6.25, "y":0}, {"label":"7", "x":7.25, "y":0}, {"label":"8", "x":8.25, "y":0}, {"label":"9", "x":9.25, "y":0}, {"label":"0", "x":10.25, "y":0}, {"label":"\u00b0", "x":11.25, "y":0}, {"label":"+", "x":12.25, "y":0}, {"label":"Backspace", "x":13.25, "y":0, "w":1.75}, {"label":"Tab", "x":0, "y":1, "w":1.75}, {"label":"A", "x":1.75, "y":1}, {"label":"Z", "x":2.75, "y":1}, {"label":"E", "x":3.75, "y":1}, {"label":"R", "x":4.75, "y":1}, {"label":"T", "x":5.75, "y":1}, {"label":"Y", "x":6.75, "y":1}, {"label":"U", "x":7.75, "y":1}, {"label":"I", "x":8.75, "y":1}, {"label":"O", "x":9.75, "y":1}, {"label":"P", "x":10.75, "y":1}, {"label":"{", "x":11.75, "y":1}, {"label":"}", "x":12.75, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":2}, {"label":"Q", "x":2, "y":2}, {"label":"S", "x":3, "y":2}, {"label":"D", "x":4, "y":2}, {"label":"F", "x":5, "y":2}, {"label":"G", "x":6, "y":2}, {"label":"H", "x":7, "y":2}, {"label":"J", "x":8, "y":2}, {"label":"K", "x":9, "y":2}, {"label":"L", "x":10, "y":2}, {"label":"M", "x":11, "y":2}, {"label":"%", "x":12, "y":2}, {"label":"µ", "x":13, "y":2}, {"label":"Enter", "x":14, "y":1, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.5}, {"label":">", "x":1.5, "y":3}, {"label":"W", "x":2.5, "y":3}, {"label":"X", "x":3.5, "y":3}, {"label":"C", "x":4.5, "y":3}, {"label":"V", "x":5.5, "y":3}, {"label":"B", "x":6.5, "y":3}, {"label":"N", "x":7.5, "y":3}, {"label":"?", "x":8.5, "y":3}, {"label":".", "x":9.5, "y":3}, {"label":"/", "x":10.5, "y":3}, {"label":"§", "x":11.5, "y":3}, {"label":"Shift", "x":12.5, "y":3, "w":2.5}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Opt", "x":1.5, "y":4, "w":1.25}, {"label":"Cmd", "x":2.75, "y":4, "w":1.5}, {"label":"Space", "x":4.25, "y":4, "w":6.5}, {"label":"Cmd", "x":10.75, "y":4, "w":1.5}, {"label":"Opt", "x":12.25, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}] diff --git a/keyboards/handwired/aek64/keymaps/4sstylz/keymap.c b/keyboards/handwired/aek64/keymaps/4sstylz/keymap.c index 0c9c5a7c18..bdfce062d3 100644 --- a/keyboards/handwired/aek64/keymaps/4sstylz/keymap.c +++ b/keyboards/handwired/aek64/keymaps/4sstylz/keymap.c @@ -39,7 +39,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * - Right Ctrl is also page-down on a single tap. * - Press JKLM for Windows + L (Session lock) */ - [0] = LAYOUT( \ + [0] = LAYOUT( QK_GESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS, KC_EQL , KC_BSPC, KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC, KC_RBRC, MO(1) , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT , @@ -60,7 +60,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * │ │ │ │ │ │ │ │ * └──────┴──────┴──────┴──────────────────────────────────────────────────────────────┴──────┴──────┴──────┘ */ - [1] = LAYOUT( \ + [1] = LAYOUT( LALT(KC_F4), KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_DEL , _______ , _______ , SLC_ALL , SLC_ROW , SLC_WRD , _______, KC_BSPC, KC_HOME, KC_UP , KC_END , KC_BRIU, KC_BRID , KC_PSCR, _______ , _______ , LSFT(KC_DEL), LCTL(KC_INS), LSFT(KC_INS), KC_DEL , KC_ENT , KC_LEFT, KC_DOWN, KC_RIGHT, BL_TOGG, BL_STEP , BL_BRTG, _______, diff --git a/keyboards/handwired/aek64/rules.mk b/keyboards/handwired/aek64/rules.mk index 03ca07fc44..1295dc41ba 100644 --- a/keyboards/handwired/aek64/rules.mk +++ b/keyboards/handwired/aek64/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/aim65/config.h b/keyboards/handwired/aim65/config.h index ae03460cc3..84e51951a9 100644 --- a/keyboards/handwired/aim65/config.h +++ b/keyboards/handwired/aim65/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 8 /* * Keyboard Matrix Assignments @@ -36,6 +31,3 @@ #define MATRIX_COL_PINS { D1, C6, B6, B2, F7, F6, F5, F4 } #define DIODE_DIRECTION COL2ROW - -#define LED_CAPS_LOCK_PIN B0 -#define LED_PIN_ON_STATE 0 diff --git a/keyboards/handwired/aim65/info.json b/keyboards/handwired/aim65/info.json index adb446d3cb..de4263d1cd 100644 --- a/keyboards/handwired/aim65/info.json +++ b/keyboards/handwired/aim65/info.json @@ -8,6 +8,12 @@ "pid": "0x0F34", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "B0", + "on_state": 0 + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/aim65/rules.mk b/keyboards/handwired/aim65/rules.mk index 515ca5621f..ab2c49da70 100644 --- a/keyboards/handwired/aim65/rules.mk +++ b/keyboards/handwired/aim65/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/alcor_dactyl/config.h b/keyboards/handwired/alcor_dactyl/config.h index 58a4ec558e..ddf705fc95 100644 --- a/keyboards/handwired/alcor_dactyl/config.h +++ b/keyboards/handwired/alcor_dactyl/config.h @@ -3,7 +3,6 @@ #pragma once -#include "config_common.h" /* * Feature disable options diff --git a/keyboards/handwired/amigopunk/config.h b/keyboards/handwired/amigopunk/config.h index c6f1a99537..78f8271f84 100644 --- a/keyboards/handwired/amigopunk/config.h +++ b/keyboards/handwired/amigopunk/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* Key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 17 /* Key matrix pins */ #define MATRIX_ROW_PINS { C0, C1, C2, C3, C4, C5 } @@ -35,9 +30,6 @@ #define ENCODERS_PAD_B { E1 } #endif -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/amigopunk/info.json b/keyboards/handwired/amigopunk/info.json index c5ff09f831..2f98f2c755 100644 --- a/keyboards/handwired/amigopunk/info.json +++ b/keyboards/handwired/amigopunk/info.json @@ -8,6 +8,8 @@ "pid": "0x1805", "device_version": "0.0.1" }, + "processor": "at90usb1286", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/amigopunk/rules.mk b/keyboards/handwired/amigopunk/rules.mk index be51253065..395f25f859 100644 --- a/keyboards/handwired/amigopunk/rules.mk +++ b/keyboards/handwired/amigopunk/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/angel/config.h b/keyboards/handwired/angel/config.h index ce1bf11ed6..a138c0c2d1 100644 --- a/keyboards/handwired/angel/config.h +++ b/keyboards/handwired/angel/config.h @@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 13 - /* * Keyboard Matrix Assignments * COLS: AVR pins used for columns, left to right @@ -36,8 +32,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define TAPPING_TERM 200 #define IGNORE_MOD_TAP_INTERRUPT -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* define if matrix has ghost (lacks anti-ghosting diodes) */ #define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/angel/info.json b/keyboards/handwired/angel/info.json index 8e932c9a47..004d30d93a 100644 --- a/keyboards/handwired/angel/info.json +++ b/keyboards/handwired/angel/info.json @@ -8,6 +8,8 @@ "pid": "0x0805", "device_version": "1.0.0" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [{"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0.5, "y":1}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":0.5, "y":3}, {"x":1.5, "y":3}, {"x":2.5, "y":3}, {"x":3.5, "y":3}, {"x":4.5, "y":3, "w":1.25}, {"x":5.75, "y":3, "w":1.5}, {"x":7.25, "y":3, "w":1.25}, {"x":8.5, "y":3}, {"x":9.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}] diff --git a/keyboards/handwired/angel/rules.mk b/keyboards/handwired/angel/rules.mk index 7dae3a8423..3b6a1809db 100644 --- a/keyboards/handwired/angel/rules.mk +++ b/keyboards/handwired/angel/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/aplx2/config.h b/keyboards/handwired/aplx2/config.h index cbe0ef91ba..c140e5bced 100644 --- a/keyboards/handwired/aplx2/config.h +++ b/keyboards/handwired/aplx2/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 2 /* pin-out */ #define MATRIX_ROW_PINS { D1 } diff --git a/keyboards/handwired/aplx2/info.json b/keyboards/handwired/aplx2/info.json index d1a6a32c26..dc1dd86e63 100644 --- a/keyboards/handwired/aplx2/info.json +++ b/keyboards/handwired/aplx2/info.json @@ -8,6 +8,8 @@ "pid": "0x0030", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/aplx2/rules.mk b/keyboards/handwired/aplx2/rules.mk index ae1cce7c8d..3e66b069b3 100644 --- a/keyboards/handwired/aplx2/rules.mk +++ b/keyboards/handwired/aplx2/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/aranck/config.h b/keyboards/handwired/aranck/config.h index cb05f9679d..024ad37c13 100644 --- a/keyboards/handwired/aranck/config.h +++ b/keyboards/handwired/aranck/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 /* * Keyboard Matrix Assignments @@ -41,37 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -88,31 +52,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define TAPPING_TERM 200 -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO /* * Feature disable options @@ -129,7 +68,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/aranck/info.json b/keyboards/handwired/aranck/info.json index 4bf69e192a..dd48558b14 100644 --- a/keyboards/handwired/aranck/info.json +++ b/keyboards/handwired/aranck/info.json @@ -8,6 +8,9 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", + "community_layouts": ["planck_mit"], "layouts": { "LAYOUT_planck_mit": { "layout": [ diff --git a/keyboards/handwired/aranck/keymaps/turkishish/config.h b/keyboards/handwired/aranck/keymaps/turkishish/config.h index 0810a3b23f..69c1beb03c 100644 --- a/keyboards/handwired/aranck/keymaps/turkishish/config.h +++ b/keyboards/handwired/aranck/keymaps/turkishish/config.h @@ -21,4 +21,4 @@ #define RETRO_TAPPING #define PERMISSIVE_HOLD #define IGNORE_MOD_TAP_INTERRUPT -#define TAPPING_FORCE_HOLD
\ No newline at end of file +#define QUICK_TAP_TERM 0
\ No newline at end of file diff --git a/keyboards/handwired/aranck/keymaps/turkishish/keymap.c b/keyboards/handwired/aranck/keymaps/turkishish/keymap.c index ea44b75094..39be83046b 100644 --- a/keyboards/handwired/aranck/keymaps/turkishish/keymap.c +++ b/keyboards/handwired/aranck/keymaps/turkishish/keymap.c @@ -64,7 +64,7 @@ enum { }; // clang-format off -const uint32_t PROGMEM unicode_map[] = { +const uint32_t unicode_map[] PROGMEM = { [TR_C] = 0x00c7, [TR_C_L] = 0x00e7, [TR_I] = 0x0130, diff --git a/keyboards/handwired/aranck/rules.mk b/keyboards/handwired/aranck/rules.mk index 515bc2f8e4..63666f07d7 100644 --- a/keyboards/handwired/aranck/rules.mk +++ b/keyboards/handwired/aranck/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = yes # Audio output - -LAYOUTS = planck_mit diff --git a/keyboards/handwired/arrow_pad/config.h b/keyboards/handwired/arrow_pad/config.h index 9615075121..556a96795c 100644 --- a/keyboards/handwired/arrow_pad/config.h +++ b/keyboards/handwired/arrow_pad/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 4 /* * Keyboard Matrix Assignments @@ -41,39 +36,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION ROW2COL -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ #define BACKLIGHT_LEVELS 3 -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ #define FORCE_NKRO /* diff --git a/keyboards/handwired/arrow_pad/info.json b/keyboards/handwired/arrow_pad/info.json index d4c3137735..9adac5b74d 100644 --- a/keyboards/handwired/arrow_pad/info.json +++ b/keyboards/handwired/arrow_pad/info.json @@ -8,6 +8,8 @@ "pid": "0x4096", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/arrow_pad/rules.mk b/keyboards/handwired/arrow_pad/rules.mk index a58b7669ff..df4dea661b 100644 --- a/keyboards/handwired/arrow_pad/rules.mk +++ b/keyboards/handwired/arrow_pad/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/atreus50/config.h b/keyboards/handwired/atreus50/config.h index 7a4840acfd..69a24d9038 100644 --- a/keyboards/handwired/atreus50/config.h +++ b/keyboards/handwired/atreus50/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 13 /* Planck PCB default pin-out */ #define MATRIX_ROW_PINS { D3, D2, D1, D0 } @@ -30,18 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -65,27 +48,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_VAL_STEP 17 /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/handwired/atreus50/info.json b/keyboards/handwired/atreus50/info.json index 640c633157..2ef04b31f4 100644 --- a/keyboards/handwired/atreus50/info.json +++ b/keyboards/handwired/atreus50/info.json @@ -8,6 +8,8 @@ "pid": "0x040D", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/atreus50/keymaps/default/keymap.c b/keyboards/handwired/atreus50/keymaps/default/keymap.c index 6feed5e070..cbcc5fc6f8 100644 --- a/keyboards/handwired/atreus50/keymaps/default/keymap.c +++ b/keyboards/handwired/atreus50/keymaps/default/keymap.c @@ -187,13 +187,13 @@ void matrix_init_user(void) { #ifdef AUDIO_ENABLE -void startup_user() +void startup_user(void) { _delay_ms(20); // gets rid of tick PLAY_SONG(tone_startup); } -void shutdown_user() +void shutdown_user(void) { PLAY_SONG(tone_goodbye); _delay_ms(150); diff --git a/keyboards/handwired/atreus50/rules.mk b/keyboards/handwired/atreus50/rules.mk index 4b2ea2d581..d9e1374773 100644 --- a/keyboards/handwired/atreus50/rules.mk +++ b/keyboards/handwired/atreus50/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/axon/config.h b/keyboards/handwired/axon/config.h index 50be74b882..a4b2c64c66 100644 --- a/keyboards/handwired/axon/config.h +++ b/keyboards/handwired/axon/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 11 /* key matrix pins */ #define MATRIX_ROW_PINS { D5, D6, D4, D0 } @@ -30,9 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/axon/info.json b/keyboards/handwired/axon/info.json index e74f63e74f..0bf0deaaf3 100644 --- a/keyboards/handwired/axon/info.json +++ b/keyboards/handwired/axon/info.json @@ -8,6 +8,8 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "atmega328p", + "bootloader": "usbasploader", "layouts": { "LAYOUT_default": { "layout": [ diff --git a/keyboards/handwired/axon/readme.md b/keyboards/handwired/axon/readme.md index d48297b4f7..ca422130ef 100644 --- a/keyboards/handwired/axon/readme.md +++ b/keyboards/handwired/axon/readme.md @@ -15,8 +15,8 @@ Make example for this keyboard (after setting up your build environment): ## To reset into bootloader mode: 1. While plugged in, press and hold `BOOT` switch -2. While holding `BOOT`, press `QK_BOOT` and hold it for a second or two -3. Release `QK_BOOT` +2. While holding `BOOT`, press `RESET` and hold it for a second or two +3. Release `RESET` 4. Release `BOOT` 5. The keyboard should now be recognized as a USBasp programmer device. diff --git a/keyboards/handwired/axon/rules.mk b/keyboards/handwired/axon/rules.mk index d1dde8af62..ab2c49da70 100644 --- a/keyboards/handwired/axon/rules.mk +++ b/keyboards/handwired/axon/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega328p - -# Bootloader selection -BOOTLOADER = usbasploader - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/baredev/rev1/config.h b/keyboards/handwired/baredev/rev1/config.h deleted file mode 100644 index 430018495a..0000000000 --- a/keyboards/handwired/baredev/rev1/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/* -Copyright 2021 Fernando "ManoShu" Rodrigues - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" diff --git a/keyboards/handwired/baredev/rev1/info.json b/keyboards/handwired/baredev/rev1/info.json index d35e3644ba..3f51e00aa6 100644 --- a/keyboards/handwired/baredev/rev1/info.json +++ b/keyboards/handwired/baredev/rev1/info.json @@ -3,7 +3,6 @@ "keyboard_name": "BareDev (rev1)", "url": "https://github.com/ManoShu/BareDev", "maintainer": "ManoShu", - "debounce": 5, "diode_direction": "COL2ROW", "tapping": { "term": 175 diff --git a/keyboards/handwired/battleship_gamepad/config.h b/keyboards/handwired/battleship_gamepad/config.h index a1ebc585de..e28cd08a2a 100644 --- a/keyboards/handwired/battleship_gamepad/config.h +++ b/keyboards/handwired/battleship_gamepad/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 8 /* key matrix pins */ #define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 } @@ -34,9 +29,6 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/battleship_gamepad/info.json b/keyboards/handwired/battleship_gamepad/info.json index b2278a79ac..ec5fc02da4 100644 --- a/keyboards/handwired/battleship_gamepad/info.json +++ b/keyboards/handwired/battleship_gamepad/info.json @@ -8,6 +8,8 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/battleship_gamepad/rules.mk b/keyboards/handwired/battleship_gamepad/rules.mk index a7a44c3988..7422e73873 100644 --- a/keyboards/handwired/battleship_gamepad/rules.mk +++ b/keyboards/handwired/battleship_gamepad/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - SRC += analog.c # Build Options diff --git a/keyboards/handwired/bdn9_ble/config.h b/keyboards/handwired/bdn9_ble/config.h index b23a9bfba8..2dc8bb5327 100644 --- a/keyboards/handwired/bdn9_ble/config.h +++ b/keyboards/handwired/bdn9_ble/config.h @@ -17,26 +17,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 3 - -/* Keyboard Matrix Assignments */ -#define DIRECT_PINS { \ - { D1, D0, C6 }, \ - { D7, B5, B6 }, \ - { B7, D6, F7 } \ -} - #define BACKLIGHT_PIN F6 -// #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 5 -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/bdn9_ble/info.json b/keyboards/handwired/bdn9_ble/info.json index 8d3bdf9d98..359939713a 100644 --- a/keyboards/handwired/bdn9_ble/info.json +++ b/keyboards/handwired/bdn9_ble/info.json @@ -8,6 +8,15 @@ "pid": "0x1134", "device_version": "1.0.0" }, + "processor": "atmega32u4", + "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D1", "D0", "C6"], + ["D7", "B5", "B6"], + ["B7", "D6", "F7"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/bdn9_ble/rules.mk b/keyboards/handwired/bdn9_ble/rules.mk index a3082cf364..c9d3996b93 100644 --- a/keyboards/handwired/bdn9_ble/rules.mk +++ b/keyboards/handwired/bdn9_ble/rules.mk @@ -1,12 +1,6 @@ -# MCU name -MCU = atmega32u4 - # Processor frequency F_CPU = 8000000 -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/bento/rev1/config.h b/keyboards/handwired/bento/rev1/config.h index 870710a8c9..497a2deb16 100644 --- a/keyboards/handwired/bento/rev1/config.h +++ b/keyboards/handwired/bento/rev1/config.h @@ -16,18 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 3 - -/* Keyboard Matrix Assignments */ -#define DIRECT_PINS { \ - { D7, B1, D2 }, \ - { E6, B4, B2 } \ -} - #define ENCODERS_PAD_A { D1 } #define ENCODERS_PAD_B { D0 } @@ -51,9 +39,6 @@ #define RGBLIGHT_EFFECT_TWINKLE #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/bento/rev1/info.json b/keyboards/handwired/bento/rev1/info.json index 26aab3813a..2b3012b399 100644 --- a/keyboards/handwired/bento/rev1/info.json +++ b/keyboards/handwired/bento/rev1/info.json @@ -8,6 +8,14 @@ "pid": "0xDAD3", "device_version": "1.0.0" }, + "processor": "atmega32u4", + "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D7", "B1", "D2"], + ["E6", "B4", "B2"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/bento/rev1/rules.mk b/keyboards/handwired/bento/rev1/rules.mk index 83fe2fb087..6a4a067737 100644 --- a/keyboards/handwired/bento/rev1/rules.mk +++ b/keyboards/handwired/bento/rev1/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/bigmac/config.h b/keyboards/handwired/bigmac/config.h index d953dea55e..f33849faf7 100644 --- a/keyboards/handwired/bigmac/config.h +++ b/keyboards/handwired/bigmac/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 17 /* * Keyboard Matrix Assignments diff --git a/keyboards/handwired/bigmac/info.json b/keyboards/handwired/bigmac/info.json index d8ee9837f2..853bd946ad 100644 --- a/keyboards/handwired/bigmac/info.json +++ b/keyboards/handwired/bigmac/info.json @@ -8,6 +8,8 @@ "pid": "0x1010", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/bigmac/rules.mk b/keyboards/handwired/bigmac/rules.mk index 354f194ca2..309e55c9f4 100644 --- a/keyboards/handwired/bigmac/rules.mk +++ b/keyboards/handwired/bigmac/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/bolek/config.h b/keyboards/handwired/bolek/config.h index 9eb853c137..ec81b3337a 100644 --- a/keyboards/handwired/bolek/config.h +++ b/keyboards/handwired/bolek/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 10 /* * Keyboard Matrix Assignments @@ -39,69 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -//#define LED_NUM_LOCK_PIN B0 -//#define LED_CAPS_LOCK_PIN B1 -//#define LED_SCROLL_LOCK_PIN B2 -//#define LED_COMPOSE_PIN B3 -//#define LED_KANA_PIN B4 - -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - -//#define RGB_DI_PIN E2 -//#ifdef RGB_DI_PIN -//# define RGBLED_NUM 16 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -//#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -118,9 +55,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 - #define PERMISSIVE_HOLD #define IGNORE_MOD_TAP_INTERRUPT diff --git a/keyboards/handwired/bolek/info.json b/keyboards/handwired/bolek/info.json index dcbfdb236e..410ed8b933 100644 --- a/keyboards/handwired/bolek/info.json +++ b/keyboards/handwired/bolek/info.json @@ -8,6 +8,8 @@ "pid": "0x3708", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/bolek/rules.mk b/keyboards/handwired/bolek/rules.mk index 515ca5621f..ab2c49da70 100644 --- a/keyboards/handwired/bolek/rules.mk +++ b/keyboards/handwired/bolek/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/boss566y/redragon_vara/config.h b/keyboards/handwired/boss566y/redragon_vara/config.h index bbb1a78dbe..d7e3fbe200 100644 --- a/keyboards/handwired/boss566y/redragon_vara/config.h +++ b/keyboards/handwired/boss566y/redragon_vara/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 11 /* * Keyboard Matrix Assignments diff --git a/keyboards/handwired/boss566y/redragon_vara/info.json b/keyboards/handwired/boss566y/redragon_vara/info.json index 7521d3daff..697cfac226 100644 --- a/keyboards/handwired/boss566y/redragon_vara/info.json +++ b/keyboards/handwired/boss566y/redragon_vara/info.json @@ -8,6 +8,9 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "halfkay", + "community_layouts": ["fullsize_ansi"], "layouts": { "LAYOUT_fullsize_ansi": { "layout": [ diff --git a/keyboards/handwired/boss566y/redragon_vara/rules.mk b/keyboards/handwired/boss566y/redragon_vara/rules.mk index 15eff609b7..42dce57024 100644 --- a/keyboards/handwired/boss566y/redragon_vara/rules.mk +++ b/keyboards/handwired/boss566y/redragon_vara/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = fullsize_ansi diff --git a/keyboards/handwired/brain/config.h b/keyboards/handwired/brain/config.h index 317d25f5f5..9b7c48da75 100644 --- a/keyboards/handwired/brain/config.h +++ b/keyboards/handwired/brain/config.h @@ -20,15 +20,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" #define SPLIT_USB_DETECT -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 10 -#define MATRIX_COLS 7 - // wiring of each half #define MATRIX_COL_PINS \ @@ -48,11 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 -/* Set 0 if debouncing isn't needed */ - - -/* serial.c configuration for split keyboard */ -#define SOFT_SERIAL_PIN D0 #define EE_HANDS //#define SPLIT_HAND_PIN B7 @@ -93,9 +82,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define TAPPING_TERM 150 //#define IGNORE_MOD_TAP_INTERRUPT -//#define TAPPING_FORCE_HOLD - -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 6 -#define BOOTMAGIC_LITE_ROW_RIGHT 5 -#define BOOTMAGIC_LITE_COLUMN_RIGHT 0 +//#define QUICK_TAP_TERM 0 diff --git a/keyboards/handwired/brain/info.json b/keyboards/handwired/brain/info.json index 89af811654..a085da297f 100644 --- a/keyboards/handwired/brain/info.json +++ b/keyboards/handwired/brain/info.json @@ -8,6 +8,17 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "bootmagic": { + "matrix": [0, 6] + }, + "split": { + "soft_serial_pin": "D0", + "bootmagic": { + "matrix": [5, 0] + } + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/brain/rules.mk b/keyboards/handwired/brain/rules.mk index d42aa82706..df7d719da1 100644 --- a/keyboards/handwired/brain/rules.mk +++ b/keyboards/handwired/brain/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/bstk100/config.h b/keyboards/handwired/bstk100/config.h index 69389d057e..2a14eca16a 100644 --- a/keyboards/handwired/bstk100/config.h +++ b/keyboards/handwired/bstk100/config.h @@ -18,11 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 5 /* * Keyboard Matrix Assignments @@ -40,77 +35,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// The state of the indicator pins when the LED is "on" - 1 for high -#define LED_PIN_ON_STATE 0 - -#define LED_NUM_LOCK_PIN D4 -#define LED_CAPS_LOCK_PIN D5 -#define LED_SCROLL_LOCK_PIN B0 -//#define LED_COMPOSE_PIN B3 -//#define LED_KANA_PIN B4 - -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - -//#define RGB_DI_PIN E2 -//#ifdef RGB_DI_PIN -//# define RGBLED_NUM 16 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -//#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -126,7 +55,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/bstk100/info.json b/keyboards/handwired/bstk100/info.json index 05d1ad212f..03580c3332 100644 --- a/keyboards/handwired/bstk100/info.json +++ b/keyboards/handwired/bstk100/info.json @@ -8,6 +8,14 @@ "pid": "0xB100", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "D5", + "num_lock": "D4", + "scroll_lock": "B0", + "on_state": 0 + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/bstk100/rules.mk b/keyboards/handwired/bstk100/rules.mk index 1275531ef6..ab2c49da70 100644 --- a/keyboards/handwired/bstk100/rules.mk +++ b/keyboards/handwired/bstk100/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/cans12er/config.h b/keyboards/handwired/cans12er/config.h index 8e7ce92439..74a7679e0b 100644 --- a/keyboards/handwired/cans12er/config.h +++ b/keyboards/handwired/cans12er/config.h @@ -1,10 +1,5 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 4 /* key matrix pins */ #define MATRIX_ROW_PINS { F7, B1, B3 } @@ -13,9 +8,6 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION ROW2COL -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/cans12er/info.json b/keyboards/handwired/cans12er/info.json index 28d6d2c83e..37dd424299 100644 --- a/keyboards/handwired/cans12er/info.json +++ b/keyboards/handwired/cans12er/info.json @@ -8,6 +8,8 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_ortho_3x4": { "layout": [ diff --git a/keyboards/handwired/cans12er/rules.mk b/keyboards/handwired/cans12er/rules.mk index 476cf49f27..3b6a1809db 100644 --- a/keyboards/handwired/cans12er/rules.mk +++ b/keyboards/handwired/cans12er/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/carpolly/config.h b/keyboards/handwired/carpolly/config.h index 8830ebff52..4c2410ca98 100644 --- a/keyboards/handwired/carpolly/config.h +++ b/keyboards/handwired/carpolly/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 13 /* * Keyboard Matrix Assignments diff --git a/keyboards/handwired/carpolly/info.json b/keyboards/handwired/carpolly/info.json index 5648033aca..482af57cc1 100644 --- a/keyboards/handwired/carpolly/info.json +++ b/keyboards/handwired/carpolly/info.json @@ -8,6 +8,8 @@ "pid": "0x0017", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/carpolly/rules.mk b/keyboards/handwired/carpolly/rules.mk index 0cc90c1160..c71e41438f 100644 --- a/keyboards/handwired/carpolly/rules.mk +++ b/keyboards/handwired/carpolly/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/chiron/config.h b/keyboards/handwired/chiron/config.h index 52bb89519b..578d13a472 100644 --- a/keyboards/handwired/chiron/config.h +++ b/keyboards/handwired/chiron/config.h @@ -17,10 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -#define MATRIX_ROWS 10 -#define MATRIX_COLS 7 // Pro Micro Pins 4, 6, 7, 8, 9 #define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 } @@ -31,13 +27,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // Pro Micro Pins RX1 #define SPLIT_HAND_PIN D2 -// Pro Micro Pins RX1 -#define SOFT_SERIAL_PIN D0 - #define DIODE_DIRECTION COL2ROW -#define DEBOUNCE 5 - #define LOCKING_SUPPORT_ENABLE #define LOCKING_RESYNC_ENABLE diff --git a/keyboards/handwired/chiron/info.json b/keyboards/handwired/chiron/info.json index 92f650c6f8..6cf49275a7 100644 --- a/keyboards/handwired/chiron/info.json +++ b/keyboards/handwired/chiron/info.json @@ -8,6 +8,11 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/chiron/rules.mk b/keyboards/handwired/chiron/rules.mk index 5a329467ec..9ca8ab3ebc 100644 --- a/keyboards/handwired/chiron/rules.mk +++ b/keyboards/handwired/chiron/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/ck4x4/config.h b/keyboards/handwired/ck4x4/config.h index 1d7a351568..0a5d6c5c6a 100644 --- a/keyboards/handwired/ck4x4/config.h +++ b/keyboards/handwired/ck4x4/config.h @@ -17,23 +17,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 4 - #define MATRIX_COL_PINS { B7, B8, B9, B10 } #define MATRIX_ROW_PINS { B3, B4, B5, B6 } #define DIODE_DIRECTION COL2ROW //LEDS A6, RGB B15 -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/ck4x4/info.json b/keyboards/handwired/ck4x4/info.json index ff165e75f7..17541e918f 100644 --- a/keyboards/handwired/ck4x4/info.json +++ b/keyboards/handwired/ck4x4/info.json @@ -8,6 +8,8 @@ "pid": "0x6464", "device_version": "0.0.1" }, + "processor": "STM32F072", + "bootloader": "stm32-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/ck4x4/rules.mk b/keyboards/handwired/ck4x4/rules.mk index b234297ed3..9a1946bb60 100644 --- a/keyboards/handwired/ck4x4/rules.mk +++ b/keyboards/handwired/ck4x4/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = STM32F072 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/cmd60/config.h b/keyboards/handwired/cmd60/config.h index 433aabc5b7..6ec23cbd19 100644 --- a/keyboards/handwired/cmd60/config.h +++ b/keyboards/handwired/cmd60/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 /* * Keyboard Matrix Assignments @@ -39,45 +34,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/handwired/cmd60/info.json b/keyboards/handwired/cmd60/info.json index 077fdbce67..635bead900 100644 --- a/keyboards/handwired/cmd60/info.json +++ b/keyboards/handwired/cmd60/info.json @@ -8,6 +8,8 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/cmd60/rules.mk b/keyboards/handwired/cmd60/rules.mk index 9b2c210d42..b6e2a5f9a4 100644 --- a/keyboards/handwired/cmd60/rules.mk +++ b/keyboards/handwired/cmd60/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/co60/info.json b/keyboards/handwired/co60/info.json index a6b2ae15dd..04541098a2 100644 --- a/keyboards/handwired/co60/info.json +++ b/keyboards/handwired/co60/info.json @@ -6,6 +6,7 @@ "vid": "0xFEED", "pid": "0x0000" }, + "community_layouts": ["60_ansi", "60_iso", "60_ansi_split_bs_rshift", "60_hhkb"], "layouts": { "LAYOUT_all": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"label":"LSpace", "x":3.75, "y":4, "w":2.25}, {"label":"Fn", "x":6, "y":4, "w":1.25}, {"label":"RSpace", "x":7.25, "y":4, "w":2.75}, {"label":"Alt", "x":10, "y":4, "w":1}, {"label":"Win", "x":11, "y":4, "w":1}, {"label":"Menu", "x":12, "y":4, "w":1}, {"label":"Ctrl", "x":13, "y":4, "w":1}, {"label":"Fn", "x":14, "y":4, "w":1}] diff --git a/keyboards/handwired/co60/keymaps/jmdaly_hhkb_split_space/keymap.c b/keyboards/handwired/co60/keymaps/jmdaly_hhkb_split_space/keymap.c index 885c31e8c6..1d49d91346 100644 --- a/keyboards/handwired/co60/keymaps/jmdaly_hhkb_split_space/keymap.c +++ b/keyboards/handwired/co60/keymaps/jmdaly_hhkb_split_space/keymap.c @@ -49,89 +49,69 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -void matrix_init_user(void) { - -} - -LEADER_EXTERNS(); - -void matrix_scan_user(void) { - - LEADER_DICTIONARY() { - leading = false; - leader_end(); - - // Close a program in i3wm - SEQ_ONE_KEY(KC_Q) { - register_code(KC_LGUI); - register_code(KC_LSFT); - register_code(KC_Q); - unregister_code(KC_Q); - unregister_code(KC_LSFT); - unregister_code(KC_LGUI); - } - // Exit i3wm - SEQ_ONE_KEY(KC_E) { - register_code(KC_LGUI); - register_code(KC_LSFT); - register_code(KC_E); - unregister_code(KC_E); - unregister_code(KC_LSFT); - unregister_code(KC_LGUI); - } - // Copy selected text in suckless terminal - SEQ_ONE_KEY(KC_C) { - register_code(KC_LCTL); - register_code(KC_LSFT); - register_code(KC_C); - unregister_code(KC_C); - unregister_code(KC_LSFT); - unregister_code(KC_LCTL); - } - // Paste text in suckless terminal - SEQ_ONE_KEY(KC_V) { - register_code(KC_LCTL); - register_code(KC_LSFT); - register_code(KC_V); - unregister_code(KC_V); - unregister_code(KC_LSFT); - unregister_code(KC_LCTL); - } - // FZF shortcut to fuzzy switch directories - SEQ_ONE_KEY(KC_D) { - register_code(KC_LALT); - register_code(KC_C); - unregister_code(KC_C); - unregister_code(KC_LALT); - } - // Send keys to bring up fuzzy process kill - SEQ_ONE_KEY(KC_K) { - SEND_STRING("kill " SS_TAP(X_TAB)); - } - // Send keys to start neovim and fuzzy search for filename - SEQ_ONE_KEY(KC_T) { - SEND_STRING("nvim "); - register_code(KC_LCTL); - register_code(KC_T); - unregister_code(KC_T); - unregister_code(KC_LCTL); - } - // Switch between windows in tmux - SEQ_ONE_KEY(KC_L) { - register_code(KC_LCTL); - register_code(KC_B); - unregister_code(KC_B); - unregister_code(KC_LCTL); - register_code(KC_L); - unregister_code(KC_L); - } +void leader_end_user() { + // Close a program in i3wm + if (leader_sequence_one_key(KC_Q)) { + register_code(KC_LGUI); + register_code(KC_LSFT); + register_code(KC_Q); + unregister_code(KC_Q); + unregister_code(KC_LSFT); + unregister_code(KC_LGUI); + } + // Exit i3wm + if (leader_sequence_one_key(KC_E)) { + register_code(KC_LGUI); + register_code(KC_LSFT); + register_code(KC_E); + unregister_code(KC_E); + unregister_code(KC_LSFT); + unregister_code(KC_LGUI); + } + // Copy selected text in suckless terminal + if (leader_sequence_one_key(KC_C)) { + register_code(KC_LCTL); + register_code(KC_LSFT); + register_code(KC_C); + unregister_code(KC_C); + unregister_code(KC_LSFT); + unregister_code(KC_LCTL); + } + // Paste text in suckless terminal + if (leader_sequence_one_key(KC_V)) { + register_code(KC_LCTL); + register_code(KC_LSFT); + register_code(KC_V); + unregister_code(KC_V); + unregister_code(KC_LSFT); + unregister_code(KC_LCTL); + } + // FZF shortcut to fuzzy switch directories + if (leader_sequence_one_key(KC_D)) { + register_code(KC_LALT); + register_code(KC_C); + unregister_code(KC_C); + unregister_code(KC_LALT); + } + // Send keys to bring up fuzzy process kill + if (leader_sequence_one_key(KC_K)) { + SEND_STRING("kill " SS_TAP(X_TAB)); + } + // Send keys to start neovim and fuzzy search for filename + if (leader_sequence_one_key(KC_T)) { + SEND_STRING("nvim "); + register_code(KC_LCTL); + register_code(KC_T); + unregister_code(KC_T); + unregister_code(KC_LCTL); + } + // Switch between windows in tmux + if (leader_sequence_one_key(KC_L)) { + register_code(KC_LCTL); + register_code(KC_B); + unregister_code(KC_B); + unregister_code(KC_LCTL); + register_code(KC_L); + unregister_code(KC_L); } -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - } diff --git a/keyboards/handwired/co60/rev1/config.h b/keyboards/handwired/co60/rev1/config.h index e018e0cd8d..f4b6aa0a45 100644 --- a/keyboards/handwired/co60/rev1/config.h +++ b/keyboards/handwired/co60/rev1/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 /* * Keyboard Matrix Assignments @@ -45,46 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -// #define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/co60/rev1/info.json b/keyboards/handwired/co60/rev1/info.json index 0b24f1e805..d48f322f87 100644 --- a/keyboards/handwired/co60/rev1/info.json +++ b/keyboards/handwired/co60/rev1/info.json @@ -2,5 +2,7 @@ "keyboard_name": "CO60 rev 1", "usb": { "device_version": "1.0.0" - } + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu" } diff --git a/keyboards/handwired/co60/rev1/rules.mk b/keyboards/handwired/co60/rev1/rules.mk index 6474d8fb95..3d0b53a5dd 100644 --- a/keyboards/handwired/co60/rev1/rules.mk +++ b/keyboards/handwired/co60/rev1/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -16,6 +10,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output LEADER_ENABLE = yes # Turn on leader support - -# Layouts supported by this PCB: -LAYOUTS = 60_ansi 60_iso 60_ansi_split_bs_rshift 60_hhkb diff --git a/keyboards/handwired/co60/rev6/config.h b/keyboards/handwired/co60/rev6/config.h index 3ab4305841..aa7079f247 100644 --- a/keyboards/handwired/co60/rev6/config.h +++ b/keyboards/handwired/co60/rev6/config.h @@ -16,11 +16,6 @@ */ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 /* ROWS: Top to bottom, COLS: Left to right */ @@ -30,9 +25,6 @@ /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/co60/rev6/info.json b/keyboards/handwired/co60/rev6/info.json index f24eaa40e2..48bc08982b 100644 --- a/keyboards/handwired/co60/rev6/info.json +++ b/keyboards/handwired/co60/rev6/info.json @@ -2,5 +2,8 @@ "keyboard_name": "CO60 rev 6", "usb": { "device_version": "6.0.0" - } + }, + "processor": "STM32F303", + "bootloader": "stm32-dfu", + "board": "QMK_PROTON_C" } diff --git a/keyboards/handwired/co60/rev6/rules.mk b/keyboards/handwired/co60/rev6/rules.mk index 117fdd5e9d..ca3fc91ea5 100644 --- a/keyboards/handwired/co60/rev6/rules.mk +++ b/keyboards/handwired/co60/rev6/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F303 -BOARD = QMK_PROTON_C - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # @@ -18,5 +11,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover AUDIO_ENABLE = no RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality LEADER_ENABLE = yes - -LAYOUTS += 60_ansi 60_ansi_split_bs_rshift 60_iso 60_hhkb diff --git a/keyboards/handwired/co60/rev7/config.h b/keyboards/handwired/co60/rev7/config.h index 9975901a6f..19ddb6be2c 100644 --- a/keyboards/handwired/co60/rev7/config.h +++ b/keyboards/handwired/co60/rev7/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 /* ROWS: Top to bottom, COLS: Left to right */ @@ -31,9 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/co60/rev7/info.json b/keyboards/handwired/co60/rev7/info.json index 8befb8663c..1c2c38f0fe 100644 --- a/keyboards/handwired/co60/rev7/info.json +++ b/keyboards/handwired/co60/rev7/info.json @@ -2,5 +2,8 @@ "keyboard_name": "CO60 rev 7", "usb": { "device_version": "7.0.0" - } + }, + "processor": "STM32F303", + "bootloader": "stm32-dfu", + "board": "QMK_PROTON_C" } diff --git a/keyboards/handwired/co60/rev7/rules.mk b/keyboards/handwired/co60/rev7/rules.mk index eabe78800a..4bd09df6a4 100644 --- a/keyboards/handwired/co60/rev7/rules.mk +++ b/keyboards/handwired/co60/rev7/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F303 -BOARD = QMK_PROTON_C - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Use SPI for RGB underglow: WS2812_DRIVER = spi @@ -21,5 +14,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover AUDIO_ENABLE = no RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality LEADER_ENABLE = yes - -LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_hhkb diff --git a/keyboards/handwired/colorlice/config.h b/keyboards/handwired/colorlice/config.h index 2f4591b8ee..4e981b4428 100644 --- a/keyboards/handwired/colorlice/config.h +++ b/keyboards/handwired/colorlice/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 /* key matrix pins */ #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } @@ -30,9 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/colorlice/info.json b/keyboards/handwired/colorlice/info.json index 4e13a7c2c6..9a884c6718 100644 --- a/keyboards/handwired/colorlice/info.json +++ b/keyboards/handwired/colorlice/info.json @@ -8,6 +8,9 @@ "pid": "0x0302", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "community_layouts": ["alice_split_bs"], "layouts": { "LAYOUT_alice_split_bs": { "layout": [ diff --git a/keyboards/handwired/colorlice/rules.mk b/keyboards/handwired/colorlice/rules.mk index 886ccccac9..972181a4b4 100644 --- a/keyboards/handwired/colorlice/rules.mk +++ b/keyboards/handwired/colorlice/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -19,5 +13,3 @@ LTO_ENABLE = yes # Use link time optimization RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow - -LAYOUTS = alice_split_bs diff --git a/keyboards/handwired/concertina/64key/config.h b/keyboards/handwired/concertina/64key/config.h index cb897ba109..2eb9a4cd67 100644 --- a/keyboards/handwired/concertina/64key/config.h +++ b/keyboards/handwired/concertina/64key/config.h @@ -16,10 +16,6 @@ #pragma once -#include "config_common.h" - -#define MATRIX_ROWS 8 -#define MATRIX_COLS 8 #define MATRIX_ROW_PINS { D1, D0, D4, C6, D7, E6, B4, B5 } #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6 } diff --git a/keyboards/handwired/concertina/64key/info.json b/keyboards/handwired/concertina/64key/info.json index d826f46031..39db710673 100644 --- a/keyboards/handwired/concertina/64key/info.json +++ b/keyboards/handwired/concertina/64key/info.json @@ -8,6 +8,8 @@ "pid": "0x3632", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT_64key": { "layout": [ diff --git a/keyboards/handwired/concertina/64key/keymaps/default/keymap.c b/keyboards/handwired/concertina/64key/keymaps/default/keymap.c index edc0f7d3cf..aced9d13c6 100644 --- a/keyboards/handwired/concertina/64key/keymaps/default/keymap.c +++ b/keyboards/handwired/concertina/64key/keymaps/default/keymap.c @@ -29,7 +29,7 @@ enum taps { PNX, // Play/pause; next track. }; -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { [PNX] = ACTION_TAP_DANCE_DOUBLE(KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK), }; diff --git a/keyboards/handwired/concertina/64key/rules.mk b/keyboards/handwired/concertina/64key/rules.mk index 1152adcc95..ab2c49da70 100644 --- a/keyboards/handwired/concertina/64key/rules.mk +++ b/keyboards/handwired/concertina/64key/rules.mk @@ -1,10 +1,3 @@ -# Written for a Pro Micro. The keyboard case is compatible with much else. -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/consolekeyboard/18key/config.h b/keyboards/handwired/consolekeyboard/18key/config.h index e9b84c5828..59aa11f675 100644 --- a/keyboards/handwired/consolekeyboard/18key/config.h +++ b/keyboards/handwired/consolekeyboard/18key/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 11 /* * Keyboard Matrix Assignments diff --git a/keyboards/handwired/consolekeyboard/18key/info.json b/keyboards/handwired/consolekeyboard/18key/info.json index 8ab498b4e3..9fb64bcf21 100644 --- a/keyboards/handwired/consolekeyboard/18key/info.json +++ b/keyboards/handwired/consolekeyboard/18key/info.json @@ -8,6 +8,8 @@ "pid": "0x3332", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/consolekeyboard/18key/rules.mk b/keyboards/handwired/consolekeyboard/18key/rules.mk index 77d7e04c72..d4b9c78d5e 100644 --- a/keyboards/handwired/consolekeyboard/18key/rules.mk +++ b/keyboards/handwired/consolekeyboard/18key/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/consolekeyboard/20key/config.h b/keyboards/handwired/consolekeyboard/20key/config.h index 7b8e521cf9..7d8f67d24e 100644 --- a/keyboards/handwired/consolekeyboard/20key/config.h +++ b/keyboards/handwired/consolekeyboard/20key/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 12 /* * Keyboard Matrix Assignments diff --git a/keyboards/handwired/consolekeyboard/20key/info.json b/keyboards/handwired/consolekeyboard/20key/info.json index 6ac860de2a..085815f58a 100644 --- a/keyboards/handwired/consolekeyboard/20key/info.json +++ b/keyboards/handwired/consolekeyboard/20key/info.json @@ -8,6 +8,8 @@ "pid": "0x3432", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/consolekeyboard/20key/rules.mk b/keyboards/handwired/consolekeyboard/20key/rules.mk index 77d7e04c72..d4b9c78d5e 100644 --- a/keyboards/handwired/consolekeyboard/20key/rules.mk +++ b/keyboards/handwired/consolekeyboard/20key/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/consolekeyboard/27key/config.h b/keyboards/handwired/consolekeyboard/27key/config.h index 45159412c8..59966bc857 100644 --- a/keyboards/handwired/consolekeyboard/27key/config.h +++ b/keyboards/handwired/consolekeyboard/27key/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 11 /* * Keyboard Matrix Assignments diff --git a/keyboards/handwired/consolekeyboard/27key/info.json b/keyboards/handwired/consolekeyboard/27key/info.json index 48c0ef5cff..37124c0196 100644 --- a/keyboards/handwired/consolekeyboard/27key/info.json +++ b/keyboards/handwired/consolekeyboard/27key/info.json @@ -8,6 +8,8 @@ "pid": "0x3433", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/consolekeyboard/27key/rules.mk b/keyboards/handwired/consolekeyboard/27key/rules.mk index 77d7e04c72..d4b9c78d5e 100644 --- a/keyboards/handwired/consolekeyboard/27key/rules.mk +++ b/keyboards/handwired/consolekeyboard/27key/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/consolekeyboard/30key/config.h b/keyboards/handwired/consolekeyboard/30key/config.h index 5840aa4b26..ba82037cf4 100644 --- a/keyboards/handwired/consolekeyboard/30key/config.h +++ b/keyboards/handwired/consolekeyboard/30key/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 12 /* * Keyboard Matrix Assignments diff --git a/keyboards/handwired/consolekeyboard/30key/info.json b/keyboards/handwired/consolekeyboard/30key/info.json index 604093b143..e8f51b2c79 100644 --- a/keyboards/handwired/consolekeyboard/30key/info.json +++ b/keyboards/handwired/consolekeyboard/30key/info.json @@ -8,6 +8,8 @@ "pid": "0x3433", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/consolekeyboard/30key/rules.mk b/keyboards/handwired/consolekeyboard/30key/rules.mk index 77d7e04c72..d4b9c78d5e 100644 --- a/keyboards/handwired/consolekeyboard/30key/rules.mk +++ b/keyboards/handwired/consolekeyboard/30key/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/croxsplit44/config.h b/keyboards/handwired/croxsplit44/config.h index d215b763af..b76c323641 100644 --- a/keyboards/handwired/croxsplit44/config.h +++ b/keyboards/handwired/croxsplit44/config.h @@ -17,10 +17,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 #define MATRIX_ROW_PINS { D4, D5, D6, D7 } #define MATRIX_COL_PINS { B6, B5, B4, D2, C0, C1, F5, F4, F3, F2, F1, F0 } diff --git a/keyboards/handwired/croxsplit44/info.json b/keyboards/handwired/croxsplit44/info.json index 032da273d2..7e5eaca944 100644 --- a/keyboards/handwired/croxsplit44/info.json +++ b/keyboards/handwired/croxsplit44/info.json @@ -8,6 +8,8 @@ "pid": "0x6146", "device_version": "0.0.1" }, + "processor": "at90usb1286", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/croxsplit44/rules.mk b/keyboards/handwired/croxsplit44/rules.mk index 87f77b103a..951dd07d6e 100644 --- a/keyboards/handwired/croxsplit44/rules.mk +++ b/keyboards/handwired/croxsplit44/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/curiosity/config.h b/keyboards/handwired/curiosity/config.h index 4cd00d8b2d..bec41310c4 100644 --- a/keyboards/handwired/curiosity/config.h +++ b/keyboards/handwired/curiosity/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 /* key matrix pins */ #define MATRIX_ROW_PINS { D0, F7, F6, F5 } diff --git a/keyboards/handwired/curiosity/info.json b/keyboards/handwired/curiosity/info.json index 738056625c..6e796c4d8c 100644 --- a/keyboards/handwired/curiosity/info.json +++ b/keyboards/handwired/curiosity/info.json @@ -8,6 +8,8 @@ "pid": "0x4355", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT_small_mods": { "layout": [ diff --git a/keyboards/handwired/curiosity/rules.mk b/keyboards/handwired/curiosity/rules.mk index b7593aec9c..40f895a51b 100644 --- a/keyboards/handwired/curiosity/rules.mk +++ b/keyboards/handwired/curiosity/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/cyberstar/config.h b/keyboards/handwired/cyberstar/config.h index bedeb157be..a8ecd69985 100644 --- a/keyboards/handwired/cyberstar/config.h +++ b/keyboards/handwired/cyberstar/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 18 #define MATRIX_ROW_PINS { A15, B3, A9, B5, A3 } #define MATRIX_COL_PINS { A4, A5, A6, A7, B0, B1, B2, B10, B11, B12, B13, B14, B15, A8, A10, A14, B8, B9 } @@ -29,9 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */ #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE @@ -59,36 +51,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/cyberstar/info.json b/keyboards/handwired/cyberstar/info.json index c680e6b418..e14b964e21 100644 --- a/keyboards/handwired/cyberstar/info.json +++ b/keyboards/handwired/cyberstar/info.json @@ -8,6 +8,8 @@ "pid": "0x432A", "device_version": "0.0.1" }, + "processor": "STM32F072", + "bootloader": "stm32-dfu", "layouts": { "LAYOUT_all": { "layout": [{"x":0, "y":0}, {"x":1.25, "y":0}, {"x":2.25, "y":0}, {"x":3.25, "y":0}, {"x":4.25, "y":0}, {"x":5.25, "y":0}, {"x":6.25, "y":0}, {"x":7.25, "y":0}, {"x":8.25, "y":0}, {"x":9.25, "y":0}, {"x":10.25, "y":0}, {"x":11.25, "y":0}, {"x":12.25, "y":0}, {"x":13.25, "y":0}, {"x":14.25, "y":0}, {"x":15.25, "y":0}, {"x":16.5, "y":0}, {"x":17.5, "y":0}, {"x":18.5, "y":0}, {"x":0, "y":1}, {"x":1.25, "y":1, "w":1.5}, {"x":2.75, "y":1}, {"x":3.75, "y":1}, {"x":4.75, "y":1}, {"x":5.75, "y":1}, {"x":6.75, "y":1}, {"x":7.75, "y":1}, {"x":8.75, "y":1}, {"x":9.75, "y":1}, {"x":10.75, "y":1}, {"x":11.75, "y":1}, {"x":12.75, "y":1}, {"x":13.75, "y":1}, {"x":14.75, "y":1, "w":1.5}, {"x":16.5, "y":1}, {"x":17.5, "y":1}, {"x":18.5, "y":1}, {"x":0, "y":2}, {"x":1.25, "y":2, "w":1.75}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2, "w":2.25}, {"x":0, "y":3}, {"x":1.25, "y":3, "w":2.25}, {"x":3.5, "y":3}, {"x":4.5, "y":3}, {"x":5.5, "y":3}, {"x":6.5, "y":3}, {"x":7.5, "y":3}, {"x":8.5, "y":3}, {"x":9.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3, "w":1.75}, {"x":15.25, "y":3}, {"x":17.5, "y":3}, {"x":3.25, "y":4}, {"x":4.25, "y":4, "w":1.5}, {"x":5.75, "y":4, "w":2.25}, {"x":8, "y":4, "w":2.75}, {"x":10.75, "y":4, "w":1.5}, {"x":12.25, "y":4}, {"x":16.5, "y":4}, {"x":17.5, "y":4}, {"x":18.5, "y":4}] diff --git a/keyboards/handwired/cyberstar/rules.mk b/keyboards/handwired/cyberstar/rules.mk index a53d7daeb0..f430af42f4 100644 --- a/keyboards/handwired/cyberstar/rules.mk +++ b/keyboards/handwired/cyberstar/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = STM32F072 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF diff --git a/keyboards/handwired/d48/config.h b/keyboards/handwired/d48/config.h index 0a1ad5a0d2..21f78e0645 100644 --- a/keyboards/handwired/d48/config.h +++ b/keyboards/handwired/d48/config.h @@ -1,10 +1,5 @@ #pragma once -#include "config_common.h" - -/* Key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 12 /* Key matrix pins */ #define MATRIX_ROW_PINS { B8, B9, B1, B2, B4 } @@ -14,15 +9,6 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Set 0 if debouncing isn't needed */ -// #define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -// #define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -// #define LOCKING_RESYNC_ENABLE - /* RGB Underglow */ #ifdef RGBLIGHT_ENABLE #define RGB_DI_PIN A15 diff --git a/keyboards/handwired/d48/info.json b/keyboards/handwired/d48/info.json index 3329c4c599..9da51d5959 100644 --- a/keyboards/handwired/d48/info.json +++ b/keyboards/handwired/d48/info.json @@ -8,6 +8,9 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "STM32F303", + "bootloader": "stm32-dfu", + "board": "QMK_PROTON_C", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/d48/keymaps/anderson/keymap.c b/keyboards/handwired/d48/keymaps/anderson/keymap.c index ae5ed7ad86..5ae92d2360 100644 --- a/keyboards/handwired/d48/keymaps/anderson/keymap.c +++ b/keyboards/handwired/d48/keymaps/anderson/keymap.c @@ -63,12 +63,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ┃LCTRL┃ │ │ ALT │ GUI │SPACE┃SPACE│ 𝛽/= │ ' │ │ ┃ \ ┃ ┗━━━━━┻━━━━━┷━━━━━┷━━━━━┷━━━━━┷━━━━━┻━━━━━┷━━━━━┷━━━━━┷━━━━━┷━━━━━┻━━━━━┛ */ - [_MAIN] = LAYOUT( \ + [_MAIN] = LAYOUT( KC_MUTE, LCTL(KC_D), - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - KC_ALPHA,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RCTL, \ - KC_LCTL, _______, _______, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_BETA, KC_QUOT, _______, _______, KC_BSLS \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_ALPHA,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RCTL, + KC_LCTL, _______, _______, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_BETA, KC_QUOT, _______, _______, KC_BSLS ), /* Alpha layer (𝛼) @@ -83,12 +83,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ┃ ┃ │ │ │ │ ┃ │ │ │ │ ┃ ┃ ┗━━━━━┻━━━━━┷━━━━━┷━━━━━┷━━━━━┷━━━━━┻━━━━━┷━━━━━┷━━━━━┷━━━━━┷━━━━━┻━━━━━┛ */ - [_ALPHA] = LAYOUT( \ - _______, _______, \ - _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, KC_NUM, KC_MINS, KC_PGUP, KC_UP, KC_PGDN, KC_TILD, KC_DEL, \ - _______, _______, KC_VOLD, KC_VOLU, _______, KC_CAPS, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT,KC_GRV, KC_BSLS, \ - _______, _______, _______, _______, _______, KC_SCRL, KC_END, KC_EQL, KC_LBRC, KC_RBRC, KC_LPRN ,KC_RPRN, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + [_ALPHA] = LAYOUT( + _______, _______, + _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, KC_NUM, KC_MINS, KC_PGUP, KC_UP, KC_PGDN, KC_TILD, KC_DEL, + _______, _______, KC_VOLD, KC_VOLU, _______, KC_CAPS, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT,KC_GRV, KC_BSLS, + _______, _______, _______, _______, _______, KC_SCRL, KC_END, KC_EQL, KC_LBRC, KC_RBRC, KC_LPRN ,KC_RPRN, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), /* Beta layer (𝛽) @@ -103,17 +103,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ┃ ┃ │ │ │ │ ┃ │ │ │ │ ┃ ┃ ┗━━━━━┻━━━━━┷━━━━━┷━━━━━┷━━━━━┷━━━━━┻━━━━━┷━━━━━┷━━━━━┷━━━━━┷━━━━━┻━━━━━┛ */ - [_BETA] = LAYOUT( \ - _______, _______, \ + [_BETA] = LAYOUT( + _______, _______, RGB_TOG, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_F12, #ifdef LIGHTMODE_ENABLE KC_LIGHT_MODE, #else _______, #endif - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, \ - _______, QK_BOOT, DB_TOGG, _______, _______, KC_SET_TIME,KC_SLEP,KC_SEQ,KC_LCBR, KC_RCBR, KC_PSCR, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + _______, QK_BOOT, DB_TOGG, _______, _______, KC_SET_TIME,KC_SLEP,KC_SEQ,KC_LCBR, KC_RCBR, KC_PSCR, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; diff --git a/keyboards/handwired/d48/rules.mk b/keyboards/handwired/d48/rules.mk index c9fc60c130..411362b652 100644 --- a/keyboards/handwired/d48/rules.mk +++ b/keyboards/handwired/d48/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F303 -BOARD = QMK_PROTON_C - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/dactyl/config.h b/keyboards/handwired/dactyl/config.h index be4891c65c..61f997b5b4 100644 --- a/keyboards/handwired/dactyl/config.h +++ b/keyboards/handwired/dactyl/config.h @@ -19,7 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" #define DIODE_DIRECTION ROW2COL #define MATRIX_ROWS 6 @@ -52,7 +51,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* fix space cadet rollover issue */ #define DISABLE_SPACE_CADET_ROLLOVER -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 15 - #define USB_MAX_POWER_CONSUMPTION 500 diff --git a/keyboards/handwired/dactyl/info.json b/keyboards/handwired/dactyl/info.json index ec0fe2b7b6..3883c165ee 100644 --- a/keyboards/handwired/dactyl/info.json +++ b/keyboards/handwired/dactyl/info.json @@ -8,6 +8,9 @@ "pid": "0x1308", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "halfkay", + "debounce": 15, "layouts": { "LAYOUT_dactyl": { "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4, "y":0}, {"label":"k05", "x":5, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k13", "x":3, "y":1}, {"label":"k14", "x":4, "y":1}, {"label":"k15", "x":5, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}, {"label":"k23", "x":3, "y":2}, {"label":"k24", "x":4, "y":2}, {"label":"k25", "x":5, "y":2}, {"label":"k30", "x":0, "y":3}, {"label":"k31", "x":1, "y":3}, {"label":"k32", "x":2, "y":3}, {"label":"k33", "x":3, "y":3}, {"label":"k34", "x":4, "y":3}, {"label":"k35", "x":5, "y":3}, {"label":"k40", "x":0, "y":4}, {"label":"k41", "x":1, "y":4}, {"label":"k42", "x":2, "y":4}, {"label":"k43", "x":3, "y":4}, {"label":"k44", "x":4, "y":4}, {"label":"k55", "x":6, "y":5}, {"label":"k50", "x":7, "y":5}, {"label":"k54", "x":7, "y":6}, {"label":"k53", "x":5, "y":6, "h":2}, {"label":"k52", "x":6, "y":6, "h":2}, {"label":"k51", "x":7, "y":7}, {"label":"k06", "x":11, "y":0}, {"label":"k07", "x":12, "y":0}, {"label":"k08", "x":13, "y":0}, {"label":"k09", "x":14, "y":0}, {"label":"k0A", "x":15, "y":0}, {"label":"k0B", "x":16, "y":0}, {"label":"k16", "x":11, "y":1}, {"label":"k17", "x":12, "y":1}, {"label":"k18", "x":13, "y":1}, {"label":"k19", "x":14, "y":1}, {"label":"k1A", "x":15, "y":1}, {"label":"k1B", "x":16, "y":1}, {"label":"k26", "x":11, "y":2}, {"label":"k27", "x":12, "y":2}, {"label":"k28", "x":13, "y":2}, {"label":"k29", "x":14, "y":2}, {"label":"k2A", "x":15, "y":2}, {"label":"k2B", "x":16, "y":2}, {"label":"k36", "x":11, "y":3}, {"label":"k37", "x":12, "y":3}, {"label":"k38", "x":13, "y":3}, {"label":"k39", "x":14, "y":3}, {"label":"k3A", "x":15, "y":3}, {"label":"k3B", "x":16, "y":3}, {"label":"k47", "x":12, "y":4}, {"label":"k48", "x":13, "y":4}, {"label":"k49", "x":14, "y":4}, {"label":"k4A", "x":15, "y":4}, {"label":"k4B", "x":16, "y":4}, {"label":"k5B", "x":9, "y":5}, {"label":"k56", "x":10, "y":5}, {"label":"k57", "x":9, "y":6}, {"label":"k5A", "x":9, "y":7}, {"label":"k59", "x":10, "y":6, "h":2}, {"label":"k58", "x":11, "y":6, "h":2}] diff --git a/keyboards/handwired/dactyl/matrix.c b/keyboards/handwired/dactyl/matrix.c index 5869b43c1b..d87fe4cbd1 100644 --- a/keyboards/handwired/dactyl/matrix.c +++ b/keyboards/handwired/dactyl/matrix.c @@ -124,7 +124,7 @@ void matrix_init(void) matrix_debouncing[i] = 0; } - matrix_init_quantum(); + matrix_init_kb(); } void init_expander(void) { @@ -277,7 +277,7 @@ uint8_t matrix_scan(void) } # endif - matrix_scan_quantum(); + matrix_scan_kb(); return 1; } diff --git a/keyboards/handwired/dactyl/rules.mk b/keyboards/handwired/dactyl/rules.mk index fdc8b2e5ef..830812f79a 100644 --- a/keyboards/handwired/dactyl/rules.mk +++ b/keyboards/handwired/dactyl/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/dactyl_left/config.h b/keyboards/handwired/dactyl_left/config.h index 6769d445d8..1e3f256b70 100644 --- a/keyboards/handwired/dactyl_left/config.h +++ b/keyboards/handwired/dactyl_left/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 6 /* * Keyboard Matrix Assignments @@ -41,68 +36,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -118,7 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/dactyl_left/info.json b/keyboards/handwired/dactyl_left/info.json index e8ab5e04c6..122b5ddf25 100644 --- a/keyboards/handwired/dactyl_left/info.json +++ b/keyboards/handwired/dactyl_left/info.json @@ -8,6 +8,8 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [{"x":0, "y":0.375, "w":1.5}, {"x":1.5, "y":0.375}, {"x":2.5, "y":0.125}, {"x":3.5, "y":0}, {"x":4.5, "y":0.125}, {"x":5.5, "y":0.25}, {"x":0, "y":1.375, "w":1.5}, {"x":1.5, "y":1.375}, {"x":2.5, "y":1.125}, {"x":3.5, "y":1}, {"x":4.5, "y":1.125}, {"x":5.5, "y":1.25}, {"x":0, "y":2.375, "w":1.5}, {"x":1.5, "y":2.375}, {"x":2.5, "y":2.125}, {"x":3.5, "y":2}, {"x":4.5, "y":2.125}, {"x":5.5, "y":2.25}, {"x":0, "y":3.375, "w":1.5}, {"x":1.5, "y":3.375}, {"x":2.5, "y":3.125}, {"x":3.5, "y":3}, {"x":4.5, "y":3.125}, {"x":5.5, "y":3.25}, {"x":0.5, "y":4.375}, {"x":1.5, "y":4.375}, {"x":2.5, "y":4.125}, {"x":3.5, "y":4}, {"x":4.5, "y":4.125}, {"x":6, "y":4.75}, {"x":7, "y":4.75}, {"x":5, "y":5.75, "h":2}, {"x":6, "y":5.75, "h":2}, {"x":7, "y":5.75}, {"x":7, "y":6.75}] diff --git a/keyboards/handwired/dactyl_left/rules.mk b/keyboards/handwired/dactyl_left/rules.mk index ad5f5465e8..fce764c22d 100644 --- a/keyboards/handwired/dactyl_left/rules.mk +++ b/keyboards/handwired/dactyl_left/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/dactyl_manuform/3x5_3/config.h b/keyboards/handwired/dactyl_manuform/3x5_3/config.h index 9f73d8bcec..33f7c9769e 100644 --- a/keyboards/handwired/dactyl_manuform/3x5_3/config.h +++ b/keyboards/handwired/dactyl_manuform/3x5_3/config.h @@ -16,12 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 8 -#define MATRIX_COLS 5 // wiring of each half #define MATRIX_COL_PINS { C6, D7, E6, B4, B5 } diff --git a/keyboards/handwired/dactyl_manuform/3x5_3/info.json b/keyboards/handwired/dactyl_manuform/3x5_3/info.json index b7c2c99f09..7302ced47e 100644 --- a/keyboards/handwired/dactyl_manuform/3x5_3/info.json +++ b/keyboards/handwired/dactyl_manuform/3x5_3/info.json @@ -8,6 +8,12 @@ "pid": "0x3536", "device_version": "0.0.3" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", + "community_layouts": ["split_3x5_3"], "layouts": { "LAYOUT_split_3x5_3": { "layout": [ diff --git a/keyboards/handwired/dactyl_manuform/3x5_3/keymaps/dlford/config.h b/keyboards/handwired/dactyl_manuform/3x5_3/keymaps/dlford/config.h index 1e6e6e58c6..b8df581b72 100644 --- a/keyboards/handwired/dactyl_manuform/3x5_3/keymaps/dlford/config.h +++ b/keyboards/handwired/dactyl_manuform/3x5_3/keymaps/dlford/config.h @@ -27,7 +27,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define TAPPING_TERM_PER_KEY // milliseconds from tap to hold for mod tap per key #define IGNORE_MOD_TAP_INTERRUPT // ignore hold mod if another tap occurs within tapping term #define PERMISSIVE_HOLD_PER_KEY // activate mod top hold earlier if another key is pressed AND released per key -#define TAPPING_FORCE_HOLD_PER_KEY // disable double tap hold key repeat per key +#define QUICK_TAP_TERM_PER_KEY // disable double tap hold key repeat per key #undef MOUSEKEY_INTERVAL #undef MOUSEKEY_DELAY #undef MOUSEKEY_TIME_TO_MAX diff --git a/keyboards/handwired/dactyl_manuform/3x5_3/keymaps/dlford/keymap.c b/keyboards/handwired/dactyl_manuform/3x5_3/keymaps/dlford/keymap.c index b5a8c82c4a..7df7897ae9 100644 --- a/keyboards/handwired/dactyl_manuform/3x5_3/keymaps/dlford/keymap.c +++ b/keyboards/handwired/dactyl_manuform/3x5_3/keymaps/dlford/keymap.c @@ -55,15 +55,15 @@ bool get_permissive_hold(uint16_t keycode, keyrecord_t *record) { } // Tapping force hold per key -bool get_tapping_force_hold(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case LT(3, KC_SPC): - return true; // Enable force hold - case LT(2, KC_TAB): - return true; - default: - return false; // Disable force hold - } +uint16_t get_quick_tap_term(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case LT(3, KC_SPC): + return 0; // Enable force hold + case LT(2, KC_TAB): + return 0; + default: + return QUICK_TAP_TERM; // Disable force hold + } } // Tapping term per key diff --git a/keyboards/handwired/dactyl_manuform/3x5_3/rules.mk b/keyboards/handwired/dactyl_manuform/3x5_3/rules.mk index 69622dee9b..275ece3219 100644 --- a/keyboards/handwired/dactyl_manuform/3x5_3/rules.mk +++ b/keyboards/handwired/dactyl_manuform/3x5_3/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # @@ -23,5 +17,3 @@ SPLIT_KEYBOARD = yes RGBLIGHT_SUPPORTED = yes RGB_MATRIX_SUPPORTED = yes - -LAYOUTS = split_3x5_3 diff --git a/keyboards/handwired/dactyl_manuform/4x5/config.h b/keyboards/handwired/dactyl_manuform/4x5/config.h index d6d568bf4e..8cb68765ba 100644 --- a/keyboards/handwired/dactyl_manuform/4x5/config.h +++ b/keyboards/handwired/dactyl_manuform/4x5/config.h @@ -18,12 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 10 -#define MATRIX_COLS 5 // wiring of each half #define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 } @@ -32,12 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - // WS2812 RGB LED strip input and number of LEDs #define RGB_DI_PIN D3 #define RGBLED_NUM 12 - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/handwired/dactyl_manuform/4x5/info.json b/keyboards/handwired/dactyl_manuform/4x5/info.json index 7dfe18c06e..00e052ce3a 100644 --- a/keyboards/handwired/dactyl_manuform/4x5/info.json +++ b/keyboards/handwired/dactyl_manuform/4x5/info.json @@ -8,6 +8,11 @@ "pid": "0x3435", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/keymap.c b/keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/keymap.c index 9d51f9906e..bc309f5a78 100644 --- a/keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/keymap.c +++ b/keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/keymap.c @@ -48,13 +48,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * '------+------' '------+------' */ -[_BASE] = LAYOUT( \ - KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, \ - KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, \ - KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, \ - KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, \ - SFT_ESC, CTL_BSPC, ALT_SPC, SFT_ENT, \ - KC_TAB, KC_HOME, KC_END, KC_DEL, \ +[_BASE] = LAYOUT( + KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, + KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, + KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, + KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, + SFT_ESC, CTL_BSPC, ALT_SPC, SFT_ENT, + KC_TAB, KC_HOME, KC_END, KC_DEL, RAISE, KC_GRV, KC_LGUI, LOWER ), @@ -79,14 +79,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * '------+------' '------+------' */ -[_RAISE] = LAYOUT( \ - ____, ____, KC_MU, ____, ____, KC_VOLU, ____, KC_UP, ____, KC_PGUP, \ - ____, KC_ML, KC_MD, KC_MR, ____, KC_MUTE, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDN, \ - ____, ____, ____, ____, ____, KC_VOLD, KC_SLSH, KC_BSLS, KC_QUES, KC_PIPE, \ - ____, ____, KC_MB1, KC_MB2, \ - ____, ____, ____, ____, \ - ____, ____, ____, ____, \ - ____, ____, ____, ____ \ +[_RAISE] = LAYOUT( + ____, ____, KC_MU, ____, ____, KC_VOLU, ____, KC_UP, ____, KC_PGUP, + ____, KC_ML, KC_MD, KC_MR, ____, KC_MUTE, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDN, + ____, ____, ____, ____, ____, KC_VOLD, KC_SLSH, KC_BSLS, KC_QUES, KC_PIPE, + ____, ____, KC_MB1, KC_MB2, + ____, ____, ____, ____, + ____, ____, ____, ____, + ____, ____, ____, ____ ), /* Lower * ,----------------------------------, ,----------------------------------, @@ -109,14 +109,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * '------+------' '------+------' */ -[_LOWER] = LAYOUT( \ - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, \ - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ - KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \ - KC_F11, KC_F12, ____, ____, \ - ____, ____, ____, ____, \ - ____, ____, ____, ____, \ - ____, ____, ____, ____ \ +[_LOWER] = LAYOUT( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, + KC_F11, KC_F12, ____, ____, + ____, ____, ____, ____, + ____, ____, ____, ____, + ____, ____, ____, ____ ) }; diff --git a/keyboards/handwired/dactyl_manuform/4x5/rules.mk b/keyboards/handwired/dactyl_manuform/4x5/rules.mk index 0415379827..b893863bb5 100644 --- a/keyboards/handwired/dactyl_manuform/4x5/rules.mk +++ b/keyboards/handwired/dactyl_manuform/4x5/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/dactyl_manuform/4x5_5/config.h b/keyboards/handwired/dactyl_manuform/4x5_5/config.h index baaab51614..d0580b7c21 100644 --- a/keyboards/handwired/dactyl_manuform/4x5_5/config.h +++ b/keyboards/handwired/dactyl_manuform/4x5_5/config.h @@ -3,10 +3,6 @@ #pragma once -#include "config_common.h" - -#define MATRIX_ROWS 10 -#define MATRIX_COLUMNS 5 // Wiring pins #define MATRIX_ROW_PINS { F7, B1, B3, B2, B4 } diff --git a/keyboards/handwired/dactyl_manuform/4x5_5/info.json b/keyboards/handwired/dactyl_manuform/4x5_5/info.json index 18f7d0cd3d..b762c15cf8 100644 --- a/keyboards/handwired/dactyl_manuform/4x5_5/info.json +++ b/keyboards/handwired/dactyl_manuform/4x5_5/info.json @@ -8,6 +8,11 @@ "pid": "0x3435", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/dactyl_manuform/4x5_5/rules.mk b/keyboards/handwired/dactyl_manuform/4x5_5/rules.mk index 3da6aa269a..4240679233 100644 --- a/keyboards/handwired/dactyl_manuform/4x5_5/rules.mk +++ b/keyboards/handwired/dactyl_manuform/4x5_5/rules.mk @@ -1,12 +1,3 @@ - -# MCU for Elite-C/Pro Micro -MCU = atmega32u4 - -# BOOTLOADER for Elite-C -BOOTLOADER = atmel-dfu -# BOOTLOADER for Pro Micro -# BOOTLOADER = caterina - # Build Options BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite diff --git a/keyboards/handwired/dactyl_manuform/4x6/config.h b/keyboards/handwired/dactyl_manuform/4x6/config.h index 9d2e3880ed..64844dd7bf 100644 --- a/keyboards/handwired/dactyl_manuform/4x6/config.h +++ b/keyboards/handwired/dactyl_manuform/4x6/config.h @@ -18,12 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 10 -#define MATRIX_COLS 6 // row-driven #define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 } diff --git a/keyboards/handwired/dactyl_manuform/4x6/info.json b/keyboards/handwired/dactyl_manuform/4x6/info.json index f2c26516eb..5d6bb593ca 100644 --- a/keyboards/handwired/dactyl_manuform/4x6/info.json +++ b/keyboards/handwired/dactyl_manuform/4x6/info.json @@ -8,6 +8,11 @@ "pid": "0x3436", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/dactyl_manuform/4x6/rules.mk b/keyboards/handwired/dactyl_manuform/4x6/rules.mk index 0415379827..b893863bb5 100644 --- a/keyboards/handwired/dactyl_manuform/4x6/rules.mk +++ b/keyboards/handwired/dactyl_manuform/4x6/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/dactyl_manuform/4x6_5/config.h b/keyboards/handwired/dactyl_manuform/4x6_5/config.h index 9d2e3880ed..64844dd7bf 100644 --- a/keyboards/handwired/dactyl_manuform/4x6_5/config.h +++ b/keyboards/handwired/dactyl_manuform/4x6_5/config.h @@ -18,12 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 10 -#define MATRIX_COLS 6 // row-driven #define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 } diff --git a/keyboards/handwired/dactyl_manuform/4x6_5/info.json b/keyboards/handwired/dactyl_manuform/4x6_5/info.json index e62f9f5b07..e650d4990c 100644 --- a/keyboards/handwired/dactyl_manuform/4x6_5/info.json +++ b/keyboards/handwired/dactyl_manuform/4x6_5/info.json @@ -8,6 +8,11 @@ "pid": "0x3436", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/dactyl_manuform/4x6_5/rules.mk b/keyboards/handwired/dactyl_manuform/4x6_5/rules.mk index 0415379827..b893863bb5 100644 --- a/keyboards/handwired/dactyl_manuform/4x6_5/rules.mk +++ b/keyboards/handwired/dactyl_manuform/4x6_5/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/dactyl_manuform/5x6/config.h b/keyboards/handwired/dactyl_manuform/5x6/config.h index fc3f00bbc4..5abd1a68a2 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/config.h +++ b/keyboards/handwired/dactyl_manuform/5x6/config.h @@ -18,12 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 12 -#define MATRIX_COLS 6 // wiring of each half #define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } @@ -34,9 +28,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // WS2812 RGB LED strip input and number of LEDs #define RGB_DI_PIN D3 #define RGBLED_NUM 12 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/handwired/dactyl_manuform/5x6/info.json b/keyboards/handwired/dactyl_manuform/5x6/info.json index 81bf8b19e8..28cd7324ba 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/info.json +++ b/keyboards/handwired/dactyl_manuform/5x6/info.json @@ -8,6 +8,11 @@ "pid": "0x3536", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT_5x6": { "layout": [ diff --git a/keyboards/handwired/dactyl_manuform/5x6/rules.mk b/keyboards/handwired/dactyl_manuform/5x6/rules.mk index 0415379827..b893863bb5 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/rules.mk +++ b/keyboards/handwired/dactyl_manuform/5x6/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/dactyl_manuform/5x6_2_5/config.h b/keyboards/handwired/dactyl_manuform/5x6_2_5/config.h index 031400fe0c..91cd7800d5 100644 --- a/keyboards/handwired/dactyl_manuform/5x6_2_5/config.h +++ b/keyboards/handwired/dactyl_manuform/5x6_2_5/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 6 // left half pro-mirco #define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } @@ -33,18 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 - -#define BOOTMAGIC_LITE_ROW_RIGHT 6 -#define BOOTMAGIC_LITE_COLUMN_RIGHT 5 - // WS2812 RGB LED strip input and number of LEDs // #define RGB_DI_PIN D3 // #define RGBLED_NUM 12 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/handwired/dactyl_manuform/5x6_2_5/info.json b/keyboards/handwired/dactyl_manuform/5x6_2_5/info.json index efb791d63a..f6643ce8c8 100644 --- a/keyboards/handwired/dactyl_manuform/5x6_2_5/info.json +++ b/keyboards/handwired/dactyl_manuform/5x6_2_5/info.json @@ -8,6 +8,14 @@ "pid": "0x3536", "device_version": "0.0.3" }, + "split": { + "soft_serial_pin": "D0", + "bootmagic": { + "matrix": [6, 5] + } + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT_5x6_2_5": { "layout": [ diff --git a/keyboards/handwired/dactyl_manuform/5x6_2_5/rules.mk b/keyboards/handwired/dactyl_manuform/5x6_2_5/rules.mk index c5b46aa48e..04b1fc01b7 100644 --- a/keyboards/handwired/dactyl_manuform/5x6_2_5/rules.mk +++ b/keyboards/handwired/dactyl_manuform/5x6_2_5/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/dactyl_manuform/5x6_5/config.h b/keyboards/handwired/dactyl_manuform/5x6_5/config.h index 273f90c600..65c4afbaf8 100644 --- a/keyboards/handwired/dactyl_manuform/5x6_5/config.h +++ b/keyboards/handwired/dactyl_manuform/5x6_5/config.h @@ -18,12 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 12 -#define MATRIX_COLS 6 // wiring of each half #define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } @@ -31,18 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 - -#define BOOTMAGIC_LITE_ROW_RIGHT 6 -#define BOOTMAGIC_LITE_COLUMN_RIGHT 5 - // WS2812 RGB LED strip input and number of LEDs // #define RGB_DI_PIN D3 // #define RGBLED_NUM 12 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/handwired/dactyl_manuform/5x6_5/info.json b/keyboards/handwired/dactyl_manuform/5x6_5/info.json index 82885646eb..e422a73131 100644 --- a/keyboards/handwired/dactyl_manuform/5x6_5/info.json +++ b/keyboards/handwired/dactyl_manuform/5x6_5/info.json @@ -8,6 +8,14 @@ "pid": "0x3536", "device_version": "0.0.2" }, + "split": { + "soft_serial_pin": "D0", + "bootmagic": { + "matrix": [6, 5] + } + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT_5x6_5": { "layout": [ diff --git a/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/cykedev/config.h b/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/cykedev/config.h index 5a94cd1760..6a28251c6b 100644 --- a/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/cykedev/config.h +++ b/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/cykedev/config.h @@ -45,12 +45,9 @@ // Configure the global tapping term (default: 200ms) #define TAPPING_TERM 200 -// Prevent normal rollover on alphas from accidentally triggering mods. -#define IGNORE_MOD_TAP_INTERRUPT -//#define IGNORE_MOD_TAP_INTERRUPT -#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY +#define HOLD_ON_OTHER_KEY_PRESS_PER_KEY // Enable rapid switch from tap to hold, disables double tap hold auto-repeat. -#define TAPPING_FORCE_HOLD +#define QUICK_TAP_TERM 0 #define FORCE_NKRO diff --git a/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/cykedev/keymap.c b/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/cykedev/keymap.c index 413fa70492..9687e77d88 100644 --- a/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/cykedev/keymap.c +++ b/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/cykedev/keymap.c @@ -195,18 +195,18 @@ layer_state_t layer_state_set_user(layer_state_t state) { return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); } -bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrecord_t *record) { +bool get_hold_on_other_key_press(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case SPC_L: - return false; - case SPC_R: return true; - case ENT_L: + case SPC_R: return false; + case ENT_L: + return true; case ENT_R: - return false; - default: return true; + default: + return false; } } diff --git a/keyboards/handwired/dactyl_manuform/5x6_5/rules.mk b/keyboards/handwired/dactyl_manuform/5x6_5/rules.mk index 1a7e6a8f94..c397f50ab5 100644 --- a/keyboards/handwired/dactyl_manuform/5x6_5/rules.mk +++ b/keyboards/handwired/dactyl_manuform/5x6_5/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/dactyl_manuform/5x6_6/config.h b/keyboards/handwired/dactyl_manuform/5x6_6/config.h index 3571a6d979..2b99868d19 100644 --- a/keyboards/handwired/dactyl_manuform/5x6_6/config.h +++ b/keyboards/handwired/dactyl_manuform/5x6_6/config.h @@ -17,16 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_COLS 6 -#define MATRIX_ROWS 14 - -#undef SOFT_SERIAL_PIN -#define SOFT_SERIAL_PIN D3 - // wiring of each half #define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } #define MATRIX_ROW_PINS { F5, F6, F7, B1, B3, B2, B6 } diff --git a/keyboards/handwired/dactyl_manuform/5x6_6/info.json b/keyboards/handwired/dactyl_manuform/5x6_6/info.json index dc2a78f4db..c81ac40fdb 100644 --- a/keyboards/handwired/dactyl_manuform/5x6_6/info.json +++ b/keyboards/handwired/dactyl_manuform/5x6_6/info.json @@ -8,6 +8,11 @@ "pid": "0x3536", "device_version": "0.0.3" }, + "split": { + "soft_serial_pin": "D3" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT_split_5x6_6": { "layout": [ diff --git a/keyboards/handwired/dactyl_manuform/5x6_6/rules.mk b/keyboards/handwired/dactyl_manuform/5x6_6/rules.mk index 1d413868d4..59ada7958f 100644 --- a/keyboards/handwired/dactyl_manuform/5x6_6/rules.mk +++ b/keyboards/handwired/dactyl_manuform/5x6_6/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/dactyl_manuform/5x6_68/info.json b/keyboards/handwired/dactyl_manuform/5x6_68/info.json index efa9a11aef..db29e436b6 100644 --- a/keyboards/handwired/dactyl_manuform/5x6_68/info.json +++ b/keyboards/handwired/dactyl_manuform/5x6_68/info.json @@ -10,6 +10,9 @@ "pid": "0x0016", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, "matrix_pins": { "cols": ["D4", "C6", "D7", "E6", "B4", "B5"], "rows": ["F6", "F7", "B1", "B3", "B2", "B6"] diff --git a/keyboards/handwired/dactyl_manuform/5x7/config.h b/keyboards/handwired/dactyl_manuform/5x7/config.h index b24d002006..38e4b1ab4b 100644 --- a/keyboards/handwired/dactyl_manuform/5x7/config.h +++ b/keyboards/handwired/dactyl_manuform/5x7/config.h @@ -18,12 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 12 -#define MATRIX_COLS 7 // wiring of each half #define MATRIX_ROW_PINS { D4, C6, D7, E6, B4, B5 } diff --git a/keyboards/handwired/dactyl_manuform/5x7/info.json b/keyboards/handwired/dactyl_manuform/5x7/info.json index 6a0b8f21ae..4eed5d53b4 100644 --- a/keyboards/handwired/dactyl_manuform/5x7/info.json +++ b/keyboards/handwired/dactyl_manuform/5x7/info.json @@ -8,6 +8,11 @@ "pid": "0x3537", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT_5x7": { "layout": [ diff --git a/keyboards/handwired/dactyl_manuform/5x7/rules.mk b/keyboards/handwired/dactyl_manuform/5x7/rules.mk index 0415379827..b893863bb5 100644 --- a/keyboards/handwired/dactyl_manuform/5x7/rules.mk +++ b/keyboards/handwired/dactyl_manuform/5x7/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/config.h b/keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/config.h index 93e1ed8449..0f40ee28ac 100644 --- a/keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/config.h +++ b/keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/config.h @@ -16,20 +16,11 @@ #pragma once -#include "config_common.h" - -#undef SOFT_SERIAL_PIN - #define MATRIX_ROW_PINS { B12, B13, B14, B15, A8 , A9, A10} #define MATRIX_COL_PINS { B1, B0, A7, A6, A5, A4} /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 -#define BOOTMAGIC_LITE_ROW_RIGHT 7 -#define BOOTMAGIC_LITE_COLUMN_RIGHT 0 - // in col2row col is input, and row is output // #define SPLIT_HAND_MATRIX_GRID A10, A4 // 68kohm @@ -37,9 +28,8 @@ /* connection */ #define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. -#define SOFT_SERIAL_PIN B6 // USART TX pin #define SERIAL_USART_RX_PIN B7 // USART RX pin -#define SERIAL_USART_TX_PIN SOFT_SERIAL_PIN // USART TX pin +#define SERIAL_USART_TX_PIN B6 // USART TX pin #define SELECT_SOFT_SERIAL_SPEED 1 // or 0, 2, 3, 4, 5 // 0: 460800 baud diff --git a/keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/info.json b/keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/info.json new file mode 100644 index 0000000000..f28579ba5f --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/info.json @@ -0,0 +1,10 @@ +{ + "split": { + "bootmagic": { + "matrix": [7, 0] + } + }, + "processor": "STM32F411", + "bootloader": "stm32-dfu", + "board": "BLACKPILL_STM32_F411" +} diff --git a/keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/rules.mk b/keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/rules.mk index d929a3516d..9be9110043 100644 --- a/keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/rules.mk +++ b/keyboards/handwired/dactyl_manuform/6x6/blackpill_f411/rules.mk @@ -1,13 +1,3 @@ -# Copyright 2021 Bartosz Nowak (@dumam) -# SPDX-License-Identifier: GPL-2.0-or-later - -# MCU name -MCU = STM32F411 -BOARD = BLACKPILL_STM32_F411 - -# Bootloader selection -BOOTLOADER = tinyuf2 - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/dactyl_manuform/6x6/config.h b/keyboards/handwired/dactyl_manuform/6x6/config.h deleted file mode 100644 index 3568b56143..0000000000 --- a/keyboards/handwired/dactyl_manuform/6x6/config.h +++ /dev/null @@ -1,28 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 14 -#define MATRIX_COLS 6 diff --git a/keyboards/handwired/dactyl_manuform/6x6/promicro/config.h b/keyboards/handwired/dactyl_manuform/6x6/promicro/config.h index 953d94a1a3..d156461f59 100644 --- a/keyboards/handwired/dactyl_manuform/6x6/promicro/config.h +++ b/keyboards/handwired/dactyl_manuform/6x6/promicro/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" // wiring of each half #define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } diff --git a/keyboards/handwired/dactyl_manuform/6x6/promicro/info.json b/keyboards/handwired/dactyl_manuform/6x6/promicro/info.json new file mode 100644 index 0000000000..52523980a9 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/6x6/promicro/info.json @@ -0,0 +1,7 @@ +{ + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina" +} diff --git a/keyboards/handwired/dactyl_manuform/6x6/promicro/rules.mk b/keyboards/handwired/dactyl_manuform/6x6/promicro/rules.mk index d47d8e75f4..e69de29bb2 100644 --- a/keyboards/handwired/dactyl_manuform/6x6/promicro/rules.mk +++ b/keyboards/handwired/dactyl_manuform/6x6/promicro/rules.mk @@ -1,8 +0,0 @@ -# Copyright 2021 Bartosz Nowak (@dumam) -# SPDX-License-Identifier: GPL-2.0-or-later - -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina diff --git a/keyboards/handwired/dactyl_manuform/6x6_4/config.h b/keyboards/handwired/dactyl_manuform/6x6_4/config.h index b7aeb2cc0d..ebf41bd292 100644 --- a/keyboards/handwired/dactyl_manuform/6x6_4/config.h +++ b/keyboards/handwired/dactyl_manuform/6x6_4/config.h @@ -18,12 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 14 -#define MATRIX_COLS 6 // wiring of each half #define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } diff --git a/keyboards/handwired/dactyl_manuform/6x6_4/info.json b/keyboards/handwired/dactyl_manuform/6x6_4/info.json index 1ee5e566be..4e9b444163 100644 --- a/keyboards/handwired/dactyl_manuform/6x6_4/info.json +++ b/keyboards/handwired/dactyl_manuform/6x6_4/info.json @@ -8,6 +8,11 @@ "pid": "0x3636", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT_6x6_4": { "layout": [ diff --git a/keyboards/handwired/dactyl_manuform/6x6_4/rules.mk b/keyboards/handwired/dactyl_manuform/6x6_4/rules.mk index 0415379827..b893863bb5 100644 --- a/keyboards/handwired/dactyl_manuform/6x6_4/rules.mk +++ b/keyboards/handwired/dactyl_manuform/6x6_4/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/dactyl_manuform/6x6_kinesis/config.h b/keyboards/handwired/dactyl_manuform/6x6_kinesis/config.h index b7aeb2cc0d..ebf41bd292 100644 --- a/keyboards/handwired/dactyl_manuform/6x6_kinesis/config.h +++ b/keyboards/handwired/dactyl_manuform/6x6_kinesis/config.h @@ -18,12 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 14 -#define MATRIX_COLS 6 // wiring of each half #define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } diff --git a/keyboards/handwired/dactyl_manuform/6x6_kinesis/info.json b/keyboards/handwired/dactyl_manuform/6x6_kinesis/info.json index a78fe14fcd..6c929eb18c 100644 --- a/keyboards/handwired/dactyl_manuform/6x6_kinesis/info.json +++ b/keyboards/handwired/dactyl_manuform/6x6_kinesis/info.json @@ -8,6 +8,11 @@ "pid": "0x3636", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT_6x6_kinesis": { "layout": [ diff --git a/keyboards/handwired/dactyl_manuform/6x6_kinesis/rules.mk b/keyboards/handwired/dactyl_manuform/6x6_kinesis/rules.mk index 0415379827..b893863bb5 100644 --- a/keyboards/handwired/dactyl_manuform/6x6_kinesis/rules.mk +++ b/keyboards/handwired/dactyl_manuform/6x6_kinesis/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/dactyl_manuform/6x7/config.h b/keyboards/handwired/dactyl_manuform/6x7/config.h index 5805496e2b..1cbf1f6545 100644 --- a/keyboards/handwired/dactyl_manuform/6x7/config.h +++ b/keyboards/handwired/dactyl_manuform/6x7/config.h @@ -18,12 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 14 -#define MATRIX_COLS 7 // wiring of each half #define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5, B7 } diff --git a/keyboards/handwired/dactyl_manuform/6x7/info.json b/keyboards/handwired/dactyl_manuform/6x7/info.json index 89548923b6..b2ea65651e 100644 --- a/keyboards/handwired/dactyl_manuform/6x7/info.json +++ b/keyboards/handwired/dactyl_manuform/6x7/info.json @@ -8,6 +8,11 @@ "pid": "0x3636", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT_6x7": { "layout": [ diff --git a/keyboards/handwired/dactyl_manuform/6x7/rules.mk b/keyboards/handwired/dactyl_manuform/6x7/rules.mk index 0415379827..b893863bb5 100644 --- a/keyboards/handwired/dactyl_manuform/6x7/rules.mk +++ b/keyboards/handwired/dactyl_manuform/6x7/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/dactyl_manuform/config.h b/keyboards/handwired/dactyl_manuform/config.h index b0745f8573..904e5a729d 100644 --- a/keyboards/handwired/dactyl_manuform/config.h +++ b/keyboards/handwired/dactyl_manuform/config.h @@ -18,7 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* mouse config */ #define MOUSEKEY_INTERVAL 20 @@ -27,12 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* serial.c configuration for split keyboard */ -#define SOFT_SERIAL_PIN D0 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/dactyl_manuform/dmote/62key/config.h b/keyboards/handwired/dactyl_manuform/dmote/62key/config.h index 8b256a86f1..dd38c6af7d 100644 --- a/keyboards/handwired/dactyl_manuform/dmote/62key/config.h +++ b/keyboards/handwired/dactyl_manuform/dmote/62key/config.h @@ -1,9 +1,5 @@ #pragma once -#include "config_common.h" - -#define MATRIX_ROWS 12 -#define MATRIX_COLS 6 // MCUs are flipped on each side, relative to the shape of the case, // but for ease of mounting, the pinout is not flipped with the controller. diff --git a/keyboards/handwired/dactyl_manuform/dmote/62key/info.json b/keyboards/handwired/dactyl_manuform/dmote/62key/info.json index 7f15634131..d26f06c45b 100644 --- a/keyboards/handwired/dactyl_manuform/dmote/62key/info.json +++ b/keyboards/handwired/dactyl_manuform/dmote/62key/info.json @@ -10,6 +10,10 @@ "pid": "0x3632", "device_version": "0.0.1" }, + "split": { + "enabled": true, + "soft_serial_pin": "D0" + }, "layouts": { "LAYOUT_62key": { "layout": [ diff --git a/keyboards/handwired/dactyl_manuform/dmote/config.h b/keyboards/handwired/dactyl_manuform/dmote/config.h deleted file mode 100644 index b8c5759db6..0000000000 --- a/keyboards/handwired/dactyl_manuform/dmote/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -#include "config_common.h" diff --git a/keyboards/handwired/dactyl_promicro/config.h b/keyboards/handwired/dactyl_promicro/config.h index a110a81c81..dc6f53955c 100644 --- a/keyboards/handwired/dactyl_promicro/config.h +++ b/keyboards/handwired/dactyl_promicro/config.h @@ -18,12 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 12 -#define MATRIX_COLS 6 // wiring of each half #define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } @@ -38,12 +32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* serial.c configuration for split keyboard */ -#define SOFT_SERIAL_PIN D0 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/dactyl_promicro/info.json b/keyboards/handwired/dactyl_promicro/info.json index c923591309..51451dfcc1 100644 --- a/keyboards/handwired/dactyl_promicro/info.json +++ b/keyboards/handwired/dactyl_promicro/info.json @@ -8,6 +8,11 @@ "pid": "0x3060", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT_6x6": { "layout": [ diff --git a/keyboards/handwired/dactyl_promicro/rules.mk b/keyboards/handwired/dactyl_promicro/rules.mk index f5e44b43f3..d3768185db 100644 --- a/keyboards/handwired/dactyl_promicro/rules.mk +++ b/keyboards/handwired/dactyl_promicro/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/dactyl_rah/config.h b/keyboards/handwired/dactyl_rah/config.h index 08f53541a3..abe8240150 100644 --- a/keyboards/handwired/dactyl_rah/config.h +++ b/keyboards/handwired/dactyl_rah/config.h @@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 12 -#define MATRIX_COLS 6 // wiring of each half #define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } @@ -40,9 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* layer config */ #define TAPPING_TOGGLE 1 -/* serial.c configuration for split keyboard */ -#define SOFT_SERIAL_PIN D0 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/dactyl_rah/info.json b/keyboards/handwired/dactyl_rah/info.json index 4612b3a9b1..bc21fcee0f 100644 --- a/keyboards/handwired/dactyl_rah/info.json +++ b/keyboards/handwired/dactyl_rah/info.json @@ -8,6 +8,11 @@ "pid": "0x3060", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT_6x6": { "layout": [ diff --git a/keyboards/handwired/dactyl_rah/rules.mk b/keyboards/handwired/dactyl_rah/rules.mk index 0415379827..b893863bb5 100644 --- a/keyboards/handwired/dactyl_rah/rules.mk +++ b/keyboards/handwired/dactyl_rah/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/daishi/config.h b/keyboards/handwired/daishi/config.h index e02c7c889c..6a5d485d7f 100644 --- a/keyboards/handwired/daishi/config.h +++ b/keyboards/handwired/daishi/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 7 -#define MATRIX_COLS 18 /* * Keyboard Matrix Assignments @@ -39,9 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Set up rotary encoder */ #define ENCODERS_PAD_A { F1 } #define ENCODERS_PAD_B { F0 } diff --git a/keyboards/handwired/daishi/info.json b/keyboards/handwired/daishi/info.json index 96afaa6a5b..a28c885537 100644 --- a/keyboards/handwired/daishi/info.json +++ b/keyboards/handwired/daishi/info.json @@ -8,6 +8,8 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "processor": "at90usb1286", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/daishi/rules.mk b/keyboards/handwired/daishi/rules.mk index bc5f2b1d0f..41a36f4cca 100644 --- a/keyboards/handwired/daishi/rules.mk +++ b/keyboards/handwired/daishi/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/daskeyboard/daskeyboard4/config.h b/keyboards/handwired/daskeyboard/daskeyboard4/config.h deleted file mode 100644 index df121b6832..0000000000 --- a/keyboards/handwired/daskeyboard/daskeyboard4/config.h +++ /dev/null @@ -1,24 +0,0 @@ -// Copyright 2022 Commander1024 (@Commander1024) -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -/* configure bootmagic lite trigger to ESC */ -#define BOOTMAGIC_LITE_ROW 5 -#define BOOTMAGIC_LITE_COLUMN 16 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT diff --git a/keyboards/handwired/daskeyboard/daskeyboard4/info.json b/keyboards/handwired/daskeyboard/daskeyboard4/info.json index a61443000d..067450ae0b 100644 --- a/keyboards/handwired/daskeyboard/daskeyboard4/info.json +++ b/keyboards/handwired/daskeyboard/daskeyboard4/info.json @@ -26,6 +26,9 @@ "vid": "0xFEED", "pid": "0x0140" }, + "bootmagic": { + "matrix": [5, 16] + }, "indicators": { "num_lock": "C13", "caps_lock": "B14", diff --git a/keyboards/handwired/datahand/config.h b/keyboards/handwired/datahand/config.h index f12b446e51..1cea39a739 100644 --- a/keyboards/handwired/datahand/config.h +++ b/keyboards/handwired/datahand/config.h @@ -15,7 +15,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 13 @@ -23,46 +22,14 @@ //#define DIODE_DIRECTION -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 0 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - */ #define FORCE_NKRO /* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - */ - -/* * Command/Windows key option * * If you define this, the thumb enter key becomes the Command/Windows key. There's still an enter key on the right diff --git a/keyboards/handwired/datahand/info.json b/keyboards/handwired/datahand/info.json index a0779c11ed..61d95aa12a 100644 --- a/keyboards/handwired/datahand/info.json +++ b/keyboards/handwired/datahand/info.json @@ -8,6 +8,9 @@ "pid": "0x0017", "device_version": "0.0.1" }, + "processor": "at90usb1286", + "bootloader": "halfkay", + "debounce": 0, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/datahand/matrix.c b/keyboards/handwired/datahand/matrix.c index 9eead28cd6..afce07e10d 100644 --- a/keyboards/handwired/datahand/matrix.c +++ b/keyboards/handwired/datahand/matrix.c @@ -59,7 +59,7 @@ void matrix_init(void) { /* Turn off the lock LEDs. */ PORTF |= LED_CAPS_LOCK | LED_NUM_LOCK | LED_SCROLL_LOCK | LED_MOUSE_LOCK; - matrix_init_quantum(); + matrix_init_kb(); } uint8_t matrix_scan(void) { @@ -73,7 +73,7 @@ uint8_t matrix_scan(void) { matrix[row] = read_cols(); } - matrix_scan_quantum(); + matrix_scan_kb(); return 1; } diff --git a/keyboards/handwired/datahand/rules.mk b/keyboards/handwired/datahand/rules.mk index 06bc1c5040..447e7fdc02 100644 --- a/keyboards/handwired/datahand/rules.mk +++ b/keyboards/handwired/datahand/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/dc/mc/001/config.h b/keyboards/handwired/dc/mc/001/config.h index b6d6f60dfc..7be4ba0aa9 100644 --- a/keyboards/handwired/dc/mc/001/config.h +++ b/keyboards/handwired/dc/mc/001/config.h @@ -17,20 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* - BUTTON_MUTE = _BV(4), - BUTTON_STOP = _BV(0), - BUTTON_TRACK_PREVIOUS = _BV(1), - BUTTON_TRACK_NEXT = _BV(2), - BUTTON_PLAY_PAUSE = _BV(3), -*/ -#define DIRECT_PINS \ - { \ - { B4, B0, B1, B2, B3 } \ - } - /* RE_CHANNEL_A = _BV(6), RE_CHANNEL_B = _BV(5), @@ -41,11 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. { B5 } #define ENCODER_RESOLUTION 4 -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -// All the keys just need 5ms of debounce, but the mute button on the rotary -// encoderneeds much more (50ms). -#define DEBOUNCE 50 - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -62,10 +43,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define NO_ACTION_TAPPING #define NO_ACTION_ONESHOT -/* Bootmagic Lite key configuration */ -// The (default) Stop key -// Doesn't work, though. Maybe becuase of the bootloader that's in use? -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 1 - #define USB_MAX_POWER_CONSUMPTION 100 diff --git a/keyboards/handwired/dc/mc/001/info.json b/keyboards/handwired/dc/mc/001/info.json index 9162b6e77e..d14c92150b 100644 --- a/keyboards/handwired/dc/mc/001/info.json +++ b/keyboards/handwired/dc/mc/001/info.json @@ -8,6 +8,17 @@ "pid": "0x4D43", "device_version": "0.0.1" }, + "bootmagic": { + "matrix": [0, 1] + }, + "processor": "atmega32u4", + "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["B4", "B0", "B1", "B2", "B3"] + ] + }, + "debounce": 50, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/dc/mc/001/rules.mk b/keyboards/handwired/dc/mc/001/rules.mk index ce162edf45..c94a511d8b 100644 --- a/keyboards/handwired/dc/mc/001/rules.mk +++ b/keyboards/handwired/dc/mc/001/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/ddg_56/config.h b/keyboards/handwired/ddg_56/config.h index ab3c0738a0..7582367f13 100644 --- a/keyboards/handwired/ddg_56/config.h +++ b/keyboards/handwired/ddg_56/config.h @@ -14,11 +14,6 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/handwired/ddg_56/info.json b/keyboards/handwired/ddg_56/info.json index 697f6c7762..2b7a8cfc43 100644 --- a/keyboards/handwired/ddg_56/info.json +++ b/keyboards/handwired/ddg_56/info.json @@ -8,6 +8,9 @@ "pid": "0xB195", "device_version": "0.0.1" }, + "processor": "STM32F303", + "bootloader": "stm32-dfu", + "board": "QMK_PROTON_C", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/ddg_56/rules.mk b/keyboards/handwired/ddg_56/rules.mk index 38329b85da..93900acf53 100644 --- a/keyboards/handwired/ddg_56/rules.mk +++ b/keyboards/handwired/ddg_56/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F303 -BOARD = QMK_PROTON_C - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/dqz11n1g/config.h b/keyboards/handwired/dqz11n1g/config.h index 3bd8123426..bd609c9082 100644 --- a/keyboards/handwired/dqz11n1g/config.h +++ b/keyboards/handwired/dqz11n1g/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* Matrix size */ #define MATRIX_ROWS 7 @@ -32,10 +31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Column read via SPI (shift register) */ /* #define MATRIX_COL_PINS { } */ -#define LED_CAPS_LOCK_PIN F7 /* A0 */ -#define LED_NUM_LOCK_PIN F5 /*A2 */ -#define LED_SCROLL_LOCK_PIN F4 /*A3 */ - #define LED_FUN_LOCK_PIN F6 /* A1 (handled in layer_state_set_user()) */ /* audio config */ diff --git a/keyboards/handwired/dqz11n1g/info.json b/keyboards/handwired/dqz11n1g/info.json index 24605b34d2..c72310a1e8 100644 --- a/keyboards/handwired/dqz11n1g/info.json +++ b/keyboards/handwired/dqz11n1g/info.json @@ -8,6 +8,13 @@ "pid": "0x4451", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "F7", + "num_lock": "F5", + "scroll_lock": "F4" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/dqz11n1g/rules.mk b/keyboards/handwired/dqz11n1g/rules.mk index db8a809da9..23f6b89cc2 100644 --- a/keyboards/handwired/dqz11n1g/rules.mk +++ b/keyboards/handwired/dqz11n1g/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Keyboard matrix uses shift-registers read via SPI CUSTOM_MATRIX = lite SRC += matrix.c diff --git a/keyboards/handwired/dygma/raise/config.h b/keyboards/handwired/dygma/raise/config.h index 1a4835cd57..f32a9ea4f0 100644 --- a/keyboards/handwired/dygma/raise/config.h +++ b/keyboards/handwired/dygma/raise/config.h @@ -15,14 +15,11 @@ */ #pragma once -#include "config_common.h" /* key matrix size */ // rows are doubled for split #define MATRIX_ROWS 10 #define MATRIX_COLS 8 -/* The scanners already debounce for us */ -#define DEBOUNCE 0 #define RGB_MATRIX_LED_COUNT 132 diff --git a/keyboards/handwired/dygma/raise/info.json b/keyboards/handwired/dygma/raise/info.json index 9bf37d6d27..312a0693a9 100644 --- a/keyboards/handwired/dygma/raise/info.json +++ b/keyboards/handwired/dygma/raise/info.json @@ -7,5 +7,9 @@ "vid": "0x1209", "pid": "0x2201", "device_version": "0.0.1" - } + }, + "processor": "STM32F411", + "bootloader": "stm32-dfu", + "board": "BLACKPILL_STM32_F411", + "debounce": 0 } diff --git a/keyboards/handwired/dygma/raise/rules.mk b/keyboards/handwired/dygma/raise/rules.mk index ce7a89af8e..362a47d7da 100644 --- a/keyboards/handwired/dygma/raise/rules.mk +++ b/keyboards/handwired/dygma/raise/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F411 -BOARD = BLACKPILL_STM32_F411 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/eagleii/config.h b/keyboards/handwired/eagleii/config.h index 2007137d84..7ebd3a4a8c 100644 --- a/keyboards/handwired/eagleii/config.h +++ b/keyboards/handwired/eagleii/config.h @@ -1,10 +1,6 @@ #pragma once -#include "config_common.h" -#define MATRIX_ROWS 12 -#define MATRIX_COLS 12 #define MATRIX_ROW_PINS { D0, B5, F1, B2, F7, F6, D4, D7, B4, B7, F5, B0 } #define MATRIX_COL_PINS { D2, C6, E6, D5, B3, D3, D1, C7, F0, B6, B1, F4 } #define DIODE_DIRECTION COL2ROW -#define DEBOUNCE 5 diff --git a/keyboards/handwired/eagleii/info.json b/keyboards/handwired/eagleii/info.json index 7a221e8224..23730b8af6 100644 --- a/keyboards/handwired/eagleii/info.json +++ b/keyboards/handwired/eagleii/info.json @@ -8,6 +8,8 @@ "pid": "0x9789", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/eagleii/rules.mk b/keyboards/handwired/eagleii/rules.mk index 4350774cd1..694c2ccd38 100644 --- a/keyboards/handwired/eagleii/rules.mk +++ b/keyboards/handwired/eagleii/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/elrgo_s/config.h b/keyboards/handwired/elrgo_s/config.h index dc20ab1d3e..40b3f759d8 100644 --- a/keyboards/handwired/elrgo_s/config.h +++ b/keyboards/handwired/elrgo_s/config.h @@ -17,11 +17,6 @@ Copyright 2021 Yaroslav Smirnov <elorenn@bk.ru> #pragma once -#include "config_common.h" - -// Rows are doubled-up for splits -#define MATRIX_ROWS 8 -#define MATRIX_COLS 6 // Wiring of each half #define MATRIX_ROW_PINS { B1, B3, B2, B6 } @@ -30,13 +25,6 @@ Copyright 2021 Yaroslav Smirnov <elorenn@bk.ru> #define DIODE_DIRECTION COL2ROW -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* serial.c configuration for split keyboard */ -#define SOFT_SERIAL_PIN D0 - - /* disable debug print */ // #define NO_DEBUG diff --git a/keyboards/handwired/elrgo_s/info.json b/keyboards/handwired/elrgo_s/info.json index a176872fbf..33e3c7566c 100644 --- a/keyboards/handwired/elrgo_s/info.json +++ b/keyboards/handwired/elrgo_s/info.json @@ -8,6 +8,11 @@ "pid": "0x3436", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT_split_3x6_5": { "layout": [ diff --git a/keyboards/handwired/elrgo_s/rules.mk b/keyboards/handwired/elrgo_s/rules.mk index c5b46aa48e..04b1fc01b7 100644 --- a/keyboards/handwired/elrgo_s/rules.mk +++ b/keyboards/handwired/elrgo_s/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/ergocheap/config.h b/keyboards/handwired/ergocheap/config.h index 9d99463961..61946adcd2 100644 --- a/keyboards/handwired/ergocheap/config.h +++ b/keyboards/handwired/ergocheap/config.h @@ -17,28 +17,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - #define MATRIX_COL_PINS { A8, A9, B14, B12, B13, B15, B3, B11, A4, A5, A6, A7, B0, B1, B10 } #define MATRIX_ROW_PINS { B5, B6, B7, B9, B8 } #define DIODE_DIRECTION COL2ROW -/* key led setting */ -//#define BACKLIGHT_PIN A8 -//#define BACKLIGHT_PWM_DRIVER PWMD1 -//#define BACKLIGHT_PWM_CHANNEL 1 -//#define BACKLIGHT_LEVELS 6 -//#define BACKLIGHT_BREATHING -//#define BREATHING_PERIOD 6 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 #define TAPPING_TERM 500 #define PERMISSIVE_HOLD diff --git a/keyboards/handwired/ergocheap/info.json b/keyboards/handwired/ergocheap/info.json index 4e2853cd85..959a4299f5 100644 --- a/keyboards/handwired/ergocheap/info.json +++ b/keyboards/handwired/ergocheap/info.json @@ -8,6 +8,8 @@ "pid": "0x6942", "device_version": "0.0.1" }, + "processor": "STM32F103", + "bootloader": "stm32duino", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/ergocheap/rules.mk b/keyboards/handwired/ergocheap/rules.mk index 6a7bda4aef..2c8f1f42bf 100644 --- a/keyboards/handwired/ergocheap/rules.mk +++ b/keyboards/handwired/ergocheap/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = STM32F103 - -# Bootloader selection -BOOTLOADER = stm32duino - # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/handwired/evk/v1_3/config.h b/keyboards/handwired/evk/v1_3/config.h index e8e3ecb704..a43abb351a 100644 --- a/keyboards/handwired/evk/v1_3/config.h +++ b/keyboards/handwired/evk/v1_3/config.h @@ -15,11 +15,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 16 /* * Keyboard Matrix Assignments @@ -39,72 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL // the positive current flows into the rows and then out of the columns negative. -/* define whiche Pins to use for the status LEDs*/ -#define LED_CAPS_LOCK_PIN D4 - - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -// #define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -120,7 +54,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/evk/v1_3/info.json b/keyboards/handwired/evk/v1_3/info.json index 99f7256522..bc6a522003 100644 --- a/keyboards/handwired/evk/v1_3/info.json +++ b/keyboards/handwired/evk/v1_3/info.json @@ -8,6 +8,11 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "D4" + }, + "processor": "atmega32u4", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/evk/v1_3/rules.mk b/keyboards/handwired/evk/v1_3/rules.mk index ad5f5465e8..fce764c22d 100644 --- a/keyboards/handwired/evk/v1_3/rules.mk +++ b/keyboards/handwired/evk/v1_3/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/fc200rt_qmk/config.h b/keyboards/handwired/fc200rt_qmk/config.h index 1ac044e8b2..055c910e8b 100644 --- a/keyboards/handwired/fc200rt_qmk/config.h +++ b/keyboards/handwired/fc200rt_qmk/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 16 #define MATRIX_ROW_PINS { B0, B1, B2, B3, E6, B7, D0, D1 } #define MATRIX_COL_PINS { D2, D3, C6, C7, D5, D4, D6, D7, B4, B5, B6, F7, F6, F5, F4, F1 } @@ -29,39 +24,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO diff --git a/keyboards/handwired/fc200rt_qmk/info.json b/keyboards/handwired/fc200rt_qmk/info.json index 261692012e..ebbd75ee7e 100644 --- a/keyboards/handwired/fc200rt_qmk/info.json +++ b/keyboards/handwired/fc200rt_qmk/info.json @@ -8,6 +8,8 @@ "pid": "0xFFFF", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}] diff --git a/keyboards/handwired/fc200rt_qmk/rules.mk b/keyboards/handwired/fc200rt_qmk/rules.mk index 0a8f3c2740..5356b24d77 100644 --- a/keyboards/handwired/fc200rt_qmk/rules.mk +++ b/keyboards/handwired/fc200rt_qmk/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/fivethirteen/config.h b/keyboards/handwired/fivethirteen/config.h index 9b5af88e57..5f5fef769b 100644 --- a/keyboards/handwired/fivethirteen/config.h +++ b/keyboards/handwired/fivethirteen/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 13 /* * Keyboard Matrix Assignments @@ -38,18 +33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -57,27 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/handwired/fivethirteen/info.json b/keyboards/handwired/fivethirteen/info.json index 51dd52faa6..0a23ba02a2 100644 --- a/keyboards/handwired/fivethirteen/info.json +++ b/keyboards/handwired/fivethirteen/info.json @@ -8,6 +8,8 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/fivethirteen/rules.mk b/keyboards/handwired/fivethirteen/rules.mk index 9b2c210d42..b6e2a5f9a4 100644 --- a/keyboards/handwired/fivethirteen/rules.mk +++ b/keyboards/handwired/fivethirteen/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/floorboard/config.h b/keyboards/handwired/floorboard/config.h index 70362f0f24..cb020114b2 100644 --- a/keyboards/handwired/floorboard/config.h +++ b/keyboards/handwired/floorboard/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 /* * Keyboard Matrix Assignments @@ -39,68 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -116,7 +54,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/floorboard/info.json b/keyboards/handwired/floorboard/info.json index 2dcc40d1af..226041e40d 100644 --- a/keyboards/handwired/floorboard/info.json +++ b/keyboards/handwired/floorboard/info.json @@ -8,6 +8,10 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "STM32F303", + "bootloader": "stm32-dfu", + "board": "QMK_PROTON_C", + "community_layouts": ["ortho_4x12"], "layouts": { "LAYOUT_ortho_4x12": { "layout": [ diff --git a/keyboards/handwired/floorboard/rules.mk b/keyboards/handwired/floorboard/rules.mk index f8ef7da37a..fce764c22d 100644 --- a/keyboards/handwired/floorboard/rules.mk +++ b/keyboards/handwired/floorboard/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F303 -BOARD = QMK_PROTON_C - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # @@ -17,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = ortho_4x12 diff --git a/keyboards/handwired/frankie_macropad/config.h b/keyboards/handwired/frankie_macropad/config.h index bd37acd361..8045d59c67 100644 --- a/keyboards/handwired/frankie_macropad/config.h +++ b/keyboards/handwired/frankie_macropad/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 4 /* * Keyboard Matrix Assignments @@ -40,74 +35,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW /* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -//#define LED_NUM_LOCK_PIN B0 -//#define LED_CAPS_LOCK_PIN B1 -//#define LED_SCROLL_LOCK_PIN B2 -//#define LED_COMPOSE_PIN B3 -//#define LED_KANA_PIN B4 - -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - -//#define RGB_DI_PIN E2 -//#ifdef RGB_DI_PIN -//# define RGBLED_NUM 16 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -//#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -// #define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -// #define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ @@ -123,9 +50,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_TAPPING #define NO_ACTION_ONESHOT -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 2 -#define BOOTMAGIC_LITE_COLUMN 0 - #define ENCODERS_PAD_A { D0, D2 } #define ENCODERS_PAD_B { D1, D3 } diff --git a/keyboards/handwired/frankie_macropad/info.json b/keyboards/handwired/frankie_macropad/info.json index 00a0d17615..3ddf407549 100644 --- a/keyboards/handwired/frankie_macropad/info.json +++ b/keyboards/handwired/frankie_macropad/info.json @@ -8,6 +8,11 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "bootmagic": { + "matrix": [2, 0] + }, + "processor": "atmega16u2", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/frankie_macropad/rules.mk b/keyboards/handwired/frankie_macropad/rules.mk index 46e261ffcb..6587f1f698 100644 --- a/keyboards/handwired/frankie_macropad/rules.mk +++ b/keyboards/handwired/frankie_macropad/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega16u2 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/frenchdev/config.h b/keyboards/handwired/frenchdev/config.h index f3d5398270..f09dea94d3 100644 --- a/keyboards/handwired/frenchdev/config.h +++ b/keyboards/handwired/frenchdev/config.h @@ -17,21 +17,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 16 #define MATRIX_COLS 6 -/* number of backlight levels */ #define BACKLIGHT_LEVELS 3 #define LED_BRIGHTNESS_LO 15 #define LED_BRIGHTNESS_HI 255 -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - #define USB_MAX_POWER_CONSUMPTION 500 #define MOUSEKEY_INTERVAL 20 @@ -42,9 +37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define TAPPING_TOGGLE 1 -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - #define TAPPING_TERM 200 #define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.) diff --git a/keyboards/handwired/frenchdev/info.json b/keyboards/handwired/frenchdev/info.json index 48725f37ac..a179dde73f 100644 --- a/keyboards/handwired/frenchdev/info.json +++ b/keyboards/handwired/frenchdev/info.json @@ -7,6 +7,8 @@ "pid": "0x1307", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/frenchdev/matrix.c b/keyboards/handwired/frenchdev/matrix.c index 6dec9c6a74..3e859d47ef 100644 --- a/keyboards/handwired/frenchdev/matrix.c +++ b/keyboards/handwired/frenchdev/matrix.c @@ -111,7 +111,7 @@ void matrix_init(void) matrix_debouncing[i] = 0; } - matrix_init_quantum(); + matrix_init_kb(); } void matrix_power_up(void) { @@ -169,7 +169,7 @@ uint8_t matrix_scan(void) } } - matrix_scan_quantum(); + matrix_scan_kb(); return 1; } diff --git a/keyboards/handwired/frenchdev/rules.mk b/keyboards/handwired/frenchdev/rules.mk index 88a48968f1..c310966f1d 100644 --- a/keyboards/handwired/frenchdev/rules.mk +++ b/keyboards/handwired/frenchdev/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/freoduo/config.h b/keyboards/handwired/freoduo/config.h index 4d433cdca7..56a55afd7c 100644 --- a/keyboards/handwired/freoduo/config.h +++ b/keyboards/handwired/freoduo/config.h @@ -15,12 +15,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -/* rows are doubled-up */ -#define MATRIX_ROWS 10 -#define MATRIX_COLS 6 /* wiring of each half */ #define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 } @@ -30,12 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 3 - -/* serial.c configuration for split keyboard */ -#define SOFT_SERIAL_PIN D0 - /* ws2812 RGB LED */ #define RGB_DI_PIN D4 #if !defined(RGBLED_NUM) diff --git a/keyboards/handwired/freoduo/info.json b/keyboards/handwired/freoduo/info.json index de0a04392b..12024a8c90 100644 --- a/keyboards/handwired/freoduo/info.json +++ b/keyboards/handwired/freoduo/info.json @@ -8,6 +8,12 @@ "pid": "0x0602", "device_version": "0.0.1" }, +"split": { + "soft_serial_pin": "D0" +}, +"processor": "atmega32u4", +"bootloader": "caterina", +"debounce": 3, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/freoduo/rules.mk b/keyboards/handwired/freoduo/rules.mk index a214cbef1f..ed940647bb 100644 --- a/keyboards/handwired/freoduo/rules.mk +++ b/keyboards/handwired/freoduo/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/fruity60/config.h b/keyboards/handwired/fruity60/config.h index b21e752d85..c325baca18 100644 --- a/keyboards/handwired/fruity60/config.h +++ b/keyboards/handwired/fruity60/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 11 #define MATRIX_ROW_PINS \ { B6, B5, D7, C6, D0, D1 } @@ -31,13 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/fruity60/info.json b/keyboards/handwired/fruity60/info.json index 3a6d3d7a6e..0cffe5b5b2 100644 --- a/keyboards/handwired/fruity60/info.json +++ b/keyboards/handwired/fruity60/info.json @@ -8,6 +8,9 @@ "pid": "0xB170", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", + "community_layouts": ["60_tsangan_hhkb"], "layouts": { "LAYOUT_60_tsangan_hhkb": { "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"label":"Backspace", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Win", "x":12.5, "y":4}, {"label":"Menu", "x":13.5, "y":4, "w":1.5}] diff --git a/keyboards/handwired/fruity60/rules.mk b/keyboards/handwired/fruity60/rules.mk index c84f68f0bf..61260f5e39 100644 --- a/keyboards/handwired/fruity60/rules.mk +++ b/keyboards/handwired/fruity60/rules.mk @@ -1,12 +1,6 @@ -# MCU name -MCU = atmega32u4 - # Processor frequency F_CPU = 8000000 -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # @@ -21,5 +15,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output BLUETOOTH_ENABLE = yes BLUETOOTH_DRIVER = BluefruitLE - -LAYOUTS = 60_tsangan_hhkb diff --git a/keyboards/handwired/gamenum/config.h b/keyboards/handwired/gamenum/config.h index eb9efef846..95477b88f0 100644 --- a/keyboards/handwired/gamenum/config.h +++ b/keyboards/handwired/gamenum/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 4 /* * Keyboard Matrix Assignments @@ -38,18 +33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION ROW2COL - -// #define BACKLIGHT_PIN C6 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -57,27 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/handwired/gamenum/info.json b/keyboards/handwired/gamenum/info.json index a2d4bb3ce4..daf77d1784 100644 --- a/keyboards/handwired/gamenum/info.json +++ b/keyboards/handwired/gamenum/info.json @@ -8,6 +8,8 @@ "pid": "0x5678", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/gamenum/readme.md b/keyboards/handwired/gamenum/readme.md index ee28cc1822..daefef48cc 100644 --- a/keyboards/handwired/gamenum/readme.md +++ b/keyboards/handwired/gamenum/readme.md @@ -46,11 +46,11 @@ Next thing to do is to add the actual layer for the keymap. ``` [DEF] = LAYOUT( - KC_FN0, KC_SLSH, KC_ASTR, KC_MINS, \ - KC_7, KC_8, KC_9, KC_PLUS, \ - KC_4, KC_5, KC_6, \ - KC_1, KC_2, KC_3, \ - KC_0, KC_DOT, KC_ENT \ + KC_FN0, KC_SLSH, KC_ASTR, KC_MINS, + KC_7, KC_8, KC_9, KC_PLUS, + KC_4, KC_5, KC_6, + KC_1, KC_2, KC_3, + KC_0, KC_DOT, KC_ENT ) ``` diff --git a/keyboards/handwired/gamenum/rules.mk b/keyboards/handwired/gamenum/rules.mk index 63aadefc79..b6e2a5f9a4 100644 --- a/keyboards/handwired/gamenum/rules.mk +++ b/keyboards/handwired/gamenum/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/hacked_motospeed/config.h b/keyboards/handwired/hacked_motospeed/config.h index 4ad84b0677..35c1ea212d 100644 --- a/keyboards/handwired/hacked_motospeed/config.h +++ b/keyboards/handwired/hacked_motospeed/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 10 -#define MATRIX_COLS 12 /* * Keyboard Matrix Assignments @@ -43,63 +38,17 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* define if matrix has ghost (lacks anti-ghosting diodes) */ #define MATRIX_HAS_GHOST -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -115,7 +64,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/hacked_motospeed/info.json b/keyboards/handwired/hacked_motospeed/info.json index a0fcd930c3..e0c8c42566 100644 --- a/keyboards/handwired/hacked_motospeed/info.json +++ b/keyboards/handwired/hacked_motospeed/info.json @@ -8,6 +8,8 @@ "pid": "0x0690", "device_version": "0.0.1" }, + "processor": "at90usb1286", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [{"label":"ESC", "x":0, "y":0, "h":2}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Z", "x":7, "y":0}, {"label":"U", "x":8, "y":0}, {"label":"I", "x":9, "y":0}, {"label":"O", "x":10, "y":0}, {"label":"P", "x":11, "y":0, "w":2}, {"label":"A", "x":1, "y":1}, {"label":"S", "x":2, "y":1}, {"label":"D", "x":3, "y":1}, {"label":"F", "x":4, "y":1}, {"label":"G", "x":5, "y":1}, {"label":"H", "x":7, "y":1}, {"label":"J", "x":8, "y":1}, {"label":"K", "x":9, "y":1}, {"label":"L", "x":10, "y":1}, {"label":"(", "x":11, "y":1}, {"label":")", "x":12, "y":1}, {"label":"=", "x":0, "y":2}, {"label":"Y", "x":1, "y":2}, {"label":"X", "x":2, "y":2}, {"label":"C", "x":3, "y":2}, {"label":"V", "x":4, "y":2}, {"label":"B", "x":5, "y":2}, {"label":"N", "x":7, "y":2}, {"label":"M", "x":8, "y":2}, {"label":",", "x":9, "y":2}, {"label":".", "x":10, "y":2}, {"label":"?", "x":11, "y":2}, {"label":"Fn", "x":0, "y":3, "w":2}, {"label":"Num", "x":2, "y":3}, {"label":"Bksp", "x":3, "y":3}, {"label":"Enter", "x":4, "y":3}, {"label":"Spc", "x":5, "y":3}, {"label":"LShift", "x":7, "y":3}, {"label":"LCtrl", "x":8, "y":3}, {"label":"LAlt", "x":9, "y":3}, {"label":"RAlt", "x":10, "y":3}, {"label":"Meta", "x":11, "y":3}, {"label":"Fn", "x":12, "y":2, "h":2}] diff --git a/keyboards/handwired/hacked_motospeed/rules.mk b/keyboards/handwired/hacked_motospeed/rules.mk index 2dbbeb1188..50716e356f 100644 --- a/keyboards/handwired/hacked_motospeed/rules.mk +++ b/keyboards/handwired/hacked_motospeed/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/heisenberg/config.h b/keyboards/handwired/heisenberg/config.h index fb418acbdc..0051981fc1 100644 --- a/keyboards/handwired/heisenberg/config.h +++ b/keyboards/handwired/heisenberg/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 /* * Keyboard Matrix Assignments @@ -41,15 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN D4 #ifdef RGB_DI_PIN #define RGBLED_NUM 6 @@ -68,20 +54,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -98,31 +72,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define TAPPING_TERM 200 -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO /* * Feature disable options @@ -139,7 +88,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/heisenberg/info.json b/keyboards/handwired/heisenberg/info.json index 9756e8981e..2ad37b00c6 100644 --- a/keyboards/handwired/heisenberg/info.json +++ b/keyboards/handwired/heisenberg/info.json @@ -8,6 +8,9 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", + "community_layouts": ["planck_mit"], "layouts": { "LAYOUT_planck_mit": { "layout": [ diff --git a/keyboards/handwired/heisenberg/keymaps/turkishish/config.h b/keyboards/handwired/heisenberg/keymaps/turkishish/config.h index 0810a3b23f..69c1beb03c 100644 --- a/keyboards/handwired/heisenberg/keymaps/turkishish/config.h +++ b/keyboards/handwired/heisenberg/keymaps/turkishish/config.h @@ -21,4 +21,4 @@ #define RETRO_TAPPING #define PERMISSIVE_HOLD #define IGNORE_MOD_TAP_INTERRUPT -#define TAPPING_FORCE_HOLD
\ No newline at end of file +#define QUICK_TAP_TERM 0
\ No newline at end of file diff --git a/keyboards/handwired/heisenberg/keymaps/turkishish/keymap.c b/keyboards/handwired/heisenberg/keymaps/turkishish/keymap.c index 0ce2b947d7..8322e43ea8 100644 --- a/keyboards/handwired/heisenberg/keymaps/turkishish/keymap.c +++ b/keyboards/handwired/heisenberg/keymaps/turkishish/keymap.c @@ -64,7 +64,7 @@ enum { }; // clang-format off -const uint32_t PROGMEM unicode_map[] = { +const uint32_t unicode_map[] PROGMEM = { [TR_C] = 0x00c7, [TR_C_L] = 0x00e7, [TR_I] = 0x0130, diff --git a/keyboards/handwired/heisenberg/rules.mk b/keyboards/handwired/heisenberg/rules.mk index 5a725c5973..bf4e123153 100644 --- a/keyboards/handwired/heisenberg/rules.mk +++ b/keyboards/handwired/heisenberg/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = yes # Audio output - -LAYOUTS = planck_mit diff --git a/keyboards/handwired/hexon38/config.h b/keyboards/handwired/hexon38/config.h index f5b4fd6d3a..5a75dff220 100644 --- a/keyboards/handwired/hexon38/config.h +++ b/keyboards/handwired/hexon38/config.h @@ -2,11 +2,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 /* key matrix pins */ #define MATRIX_ROW_PINS { B0, F0, B2, F4 } @@ -15,9 +10,6 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION ROW2COL -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - #ifdef RGB_DI_PIN #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD @@ -34,12 +26,3 @@ #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 #endif - - -// Disabled features: - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/handwired/hexon38/info.json b/keyboards/handwired/hexon38/info.json index d993e33a37..a0ea12aae5 100644 --- a/keyboards/handwired/hexon38/info.json +++ b/keyboards/handwired/hexon38/info.json @@ -8,6 +8,8 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/hexon38/rules.mk b/keyboards/handwired/hexon38/rules.mk index b092156024..fb9061cbb5 100644 --- a/keyboards/handwired/hexon38/rules.mk +++ b/keyboards/handwired/hexon38/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/hnah108/config.h b/keyboards/handwired/hnah108/config.h index 27fa0fd23c..13367a2577 100644 --- a/keyboards/handwired/hnah108/config.h +++ b/keyboards/handwired/hnah108/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 10 -#define MATRIX_COLS 11 /* * Keyboard Matrix Assignments @@ -97,43 +92,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define ENABLE_RGB_MATRIX_SOLID_SPLASH #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -149,7 +112,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/hnah108/info.json b/keyboards/handwired/hnah108/info.json index 5671ad4a7e..257fcf279c 100644 --- a/keyboards/handwired/hnah108/info.json +++ b/keyboards/handwired/hnah108/info.json @@ -8,6 +8,8 @@ "pid": "0x0000", "device_version": "0.0.2" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/handwired/hnah108/rules.mk b/keyboards/handwired/hnah108/rules.mk index 1b9d6c699d..ae9acc534f 100644 --- a/keyboards/handwired/hnah108/rules.mk +++ b/keyboards/handwired/hnah108/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/hnah40/config.h b/keyboards/handwired/hnah40/config.h index 8f9ca21588..083450a743 100644 --- a/keyboards/handwired/hnah40/config.h +++ b/keyboards/handwired/hnah40/config.h @@ -16,11 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 11 /* * Keyboard Matrix Assignments @@ -38,60 +33,17 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #endif - /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCING 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - #define USB_MAX_POWER_CONSUMPTION 100 /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/handwired/hnah40/info.json b/keyboards/handwired/hnah40/info.json index e4ca3fbb84..d01cdbd00d 100644 --- a/keyboards/handwired/hnah40/info.json +++ b/keyboards/handwired/hnah40/info.json @@ -8,6 +8,8 @@ "pid": "0x0000", "device_version": "0.0.2" }, + "processor": "atmega328p", + "bootloader": "usbasploader", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/hnah40/rules.mk b/keyboards/handwired/hnah40/rules.mk index cd1aba4f8e..d4acd7ecd1 100644 --- a/keyboards/handwired/hnah40/rules.mk +++ b/keyboards/handwired/hnah40/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega328p - -# Bootloader selection -BOOTLOADER = usbasploader - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/hnah40rgb/config.h b/keyboards/handwired/hnah40rgb/config.h index d1d16c8571..d4cf391b6d 100644 --- a/keyboards/handwired/hnah40rgb/config.h +++ b/keyboards/handwired/hnah40rgb/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 11 /* * Keyboard Matrix Assignments @@ -41,11 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #ifdef RGB_MATRIX_ENABLE #define RGB_DI_PIN E2 #define RGB_MATRIX_LED_COUNT 50 diff --git a/keyboards/handwired/hnah40rgb/info.json b/keyboards/handwired/hnah40rgb/info.json index d00935ec26..ab8ec811c3 100644 --- a/keyboards/handwired/hnah40rgb/info.json +++ b/keyboards/handwired/hnah40rgb/info.json @@ -8,6 +8,8 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/handwired/hnah40rgb/keymaps/ansi/keymap.c b/keyboards/handwired/hnah40rgb/keymaps/ansi/keymap.c index d23ef8b00f..f94642c3fb 100644 --- a/keyboards/handwired/hnah40rgb/keymaps/ansi/keymap.c +++ b/keyboards/handwired/hnah40rgb/keymaps/ansi/keymap.c @@ -51,7 +51,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; bool rgb_matrix_indicators_user(void) { - if (IS_HOST_LED_ON(USB_LED_CAPS_LOCK)) + if (host_keyboard_led_state().caps_lock) { rgb_matrix_set_color(22, 255, 255, 255); } diff --git a/keyboards/handwired/hnah40rgb/keymaps/default/keymap.c b/keyboards/handwired/hnah40rgb/keymaps/default/keymap.c index 7a0fcfd8df..6fa2916b38 100644 --- a/keyboards/handwired/hnah40rgb/keymaps/default/keymap.c +++ b/keyboards/handwired/hnah40rgb/keymaps/default/keymap.c @@ -51,7 +51,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; bool rgb_matrix_indicators_user(void) { - if (IS_HOST_LED_ON(USB_LED_CAPS_LOCK)) { + if (host_keyboard_led_state().caps_lock) { rgb_matrix_set_color(22, 255, 255, 255); } if (IS_LAYER_ON(_L1)) { diff --git a/keyboards/handwired/hnah40rgb/rules.mk b/keyboards/handwired/hnah40rgb/rules.mk index 2991d29477..cab4eea965 100644 --- a/keyboards/handwired/hnah40rgb/rules.mk +++ b/keyboards/handwired/hnah40rgb/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/hwpm87/config.h b/keyboards/handwired/hwpm87/config.h index 60ef15ab44..427c62a66b 100644 --- a/keyboards/handwired/hwpm87/config.h +++ b/keyboards/handwired/hwpm87/config.h @@ -3,12 +3,6 @@ #pragma once -#include "config_common.h" - - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 18 /* * Keyboard Matrix Assignments @@ -24,6 +18,3 @@ #define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5 } #define MATRIX_COL_PINS { D3, D2, D1, D0, D4, C6, D7, E6, B7, F0, F1, D6, C7, B6, F7, F6, F5, F4 } - -#define LED_CAPS_LOCK_PIN D5 -#define LED_PIN_ON_STATE 0 diff --git a/keyboards/handwired/hwpm87/info.json b/keyboards/handwired/hwpm87/info.json index 90d8ad397c..8654ea7561 100644 --- a/keyboards/handwired/hwpm87/info.json +++ b/keyboards/handwired/hwpm87/info.json @@ -8,6 +8,12 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "D5", + "on_state": 0 + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/hwpm87/rules.mk b/keyboards/handwired/hwpm87/rules.mk index 7f42dae592..90f47aeb93 100644 --- a/keyboards/handwired/hwpm87/rules.mk +++ b/keyboards/handwired/hwpm87/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/ibm122m/config.h b/keyboards/handwired/ibm122m/config.h index e9f99eaba3..e8ca31777e 100644 --- a/keyboards/handwired/ibm122m/config.h +++ b/keyboards/handwired/ibm122m/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 20 /* * Keyboard Matrix Assignments @@ -39,49 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 15 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - #define AUDIO_PIN_ALT B6 #define AUDIO_PIN C6 diff --git a/keyboards/handwired/ibm122m/info.json b/keyboards/handwired/ibm122m/info.json index 970aa57240..aa423f0ece 100644 --- a/keyboards/handwired/ibm122m/info.json +++ b/keyboards/handwired/ibm122m/info.json @@ -7,6 +7,9 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "at90usb1286", + "bootloader": "halfkay", + "debounce": 15, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/ibm122m/rules.mk b/keyboards/handwired/ibm122m/rules.mk index 317e8a5ae8..3b2469ecc8 100644 --- a/keyboards/handwired/ibm122m/rules.mk +++ b/keyboards/handwired/ibm122m/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/ibm_wheelwriter/config.h b/keyboards/handwired/ibm_wheelwriter/config.h index eda98c03b5..254f60be74 100644 --- a/keyboards/handwired/ibm_wheelwriter/config.h +++ b/keyboards/handwired/ibm_wheelwriter/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 13 /* * Keyboard Matrix Assignments diff --git a/keyboards/handwired/ibm_wheelwriter/info.json b/keyboards/handwired/ibm_wheelwriter/info.json index 35e1e8c404..d75336e0b6 100644 --- a/keyboards/handwired/ibm_wheelwriter/info.json +++ b/keyboards/handwired/ibm_wheelwriter/info.json @@ -8,6 +8,8 @@ "pid": "0x5F89", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/ibm_wheelwriter/rules.mk b/keyboards/handwired/ibm_wheelwriter/rules.mk index 354f194ca2..309e55c9f4 100644 --- a/keyboards/handwired/ibm_wheelwriter/rules.mk +++ b/keyboards/handwired/ibm_wheelwriter/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/jn68m/config.h b/keyboards/handwired/jn68m/config.h index cabfebbfcd..a0045560a1 100644 --- a/keyboards/handwired/jn68m/config.h +++ b/keyboards/handwired/jn68m/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 /* key matrix pins */ #define MATRIX_ROW_PINS { B0, B1, D5, D3, D2 } @@ -30,9 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/jn68m/info.json b/keyboards/handwired/jn68m/info.json index d244bbbb4e..5ea575525a 100644 --- a/keyboards/handwired/jn68m/info.json +++ b/keyboards/handwired/jn68m/info.json @@ -8,6 +8,7 @@ "pid": "0x1010", "device_version": "0.0.1" }, + "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { diff --git a/keyboards/handwired/jn68m/rules.mk b/keyboards/handwired/jn68m/rules.mk index 5bbac480b2..d4acd7ecd1 100644 --- a/keyboards/handwired/jn68m/rules.mk +++ b/keyboards/handwired/jn68m/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/jopr/config.h b/keyboards/handwired/jopr/config.h index 9acc8a4f4e..7078ebb31d 100644 --- a/keyboards/handwired/jopr/config.h +++ b/keyboards/handwired/jopr/config.h @@ -1,10 +1,5 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 10 -#define MATRIX_COLS 11 /* key matrix pins */ #define MATRIX_ROW_PINS { D0, D6, D2, D4, D3, D5, D7, C6, B6, F5 } @@ -13,9 +8,6 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ /* #define LOCKING_SUPPORT_ENABLE */ diff --git a/keyboards/handwired/jopr/info.json b/keyboards/handwired/jopr/info.json index 7da42ae0f4..f9bb248aee 100644 --- a/keyboards/handwired/jopr/info.json +++ b/keyboards/handwired/jopr/info.json @@ -8,6 +8,8 @@ "pid": "0x1000", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/jopr/rules.mk b/keyboards/handwired/jopr/rules.mk index 6157d25454..5bb5e8e0dc 100644 --- a/keyboards/handwired/jopr/rules.mk +++ b/keyboards/handwired/jopr/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/jot50/config.h b/keyboards/handwired/jot50/config.h index d3ce848df6..e1359e093e 100644 --- a/keyboards/handwired/jot50/config.h +++ b/keyboards/handwired/jot50/config.h @@ -1,10 +1,5 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 12 /* pro_micro pin-out */ #define MATRIX_ROW_PINS { D7, E6, B4, B6, B2 } @@ -19,9 +14,6 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/jot50/info.json b/keyboards/handwired/jot50/info.json index 8df364e5a6..db08eef195 100644 --- a/keyboards/handwired/jot50/info.json +++ b/keyboards/handwired/jot50/info.json @@ -8,6 +8,9 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", + "community_layouts": ["ortho_5x12"], "layouts": { "LAYOUT_ortho_5x12": { "layout": [ diff --git a/keyboards/handwired/jot50/rules.mk b/keyboards/handwired/jot50/rules.mk index eb0954f776..8135e80671 100644 --- a/keyboards/handwired/jot50/rules.mk +++ b/keyboards/handwired/jot50/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - -LAYOUTS = ortho_5x12 diff --git a/keyboards/handwired/jotanck/config.h b/keyboards/handwired/jotanck/config.h index 9468505c44..f3e53c98ce 100644 --- a/keyboards/handwired/jotanck/config.h +++ b/keyboards/handwired/jotanck/config.h @@ -1,10 +1,5 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 /* pro_micro pin-out */ #define MATRIX_ROW_PINS { D7, E6, B6, B2 } @@ -18,9 +13,6 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/jotanck/info.json b/keyboards/handwired/jotanck/info.json index c0b009c3ae..57e41a0f8b 100644 --- a/keyboards/handwired/jotanck/info.json +++ b/keyboards/handwired/jotanck/info.json @@ -8,6 +8,9 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", + "community_layouts": ["ortho_4x12"], "layouts": { "LAYOUT_ortho_4x12": { "layout": [ diff --git a/keyboards/handwired/jotanck/jotanck.c b/keyboards/handwired/jotanck/jotanck.c index af650b129e..23e2b9634c 100644 --- a/keyboards/handwired/jotanck/jotanck.c +++ b/keyboards/handwired/jotanck/jotanck.c @@ -1,6 +1,6 @@ #include "jotanck.h" -void keyboard_pre_init_kb() { +void keyboard_pre_init_kb(void) { setPinOutput(JOTANCK_LED1); setPinOutput(JOTANCK_LED2); diff --git a/keyboards/handwired/jotanck/rules.mk b/keyboards/handwired/jotanck/rules.mk index 73167aeed7..696f338724 100644 --- a/keyboards/handwired/jotanck/rules.mk +++ b/keyboards/handwired/jotanck/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - -LAYOUTS = ortho_4x12 diff --git a/keyboards/handwired/jotpad16/config.h b/keyboards/handwired/jotpad16/config.h index b0e3ebcf8c..c8a121fb44 100644 --- a/keyboards/handwired/jotpad16/config.h +++ b/keyboards/handwired/jotpad16/config.h @@ -1,10 +1,5 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 4 /* pro_micro pin-out */ #define MATRIX_ROW_PINS { B6, B2, D2, D3 } @@ -19,9 +14,6 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 0 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/jotpad16/info.json b/keyboards/handwired/jotpad16/info.json index 97c2ddbd75..7ec8f9aa97 100644 --- a/keyboards/handwired/jotpad16/info.json +++ b/keyboards/handwired/jotpad16/info.json @@ -8,6 +8,10 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", + "debounce": 0, + "community_layouts": ["ortho_4x4"], "layouts": { "LAYOUT_ortho_4x4": { "layout": [ diff --git a/keyboards/handwired/jotpad16/jotpad16.c b/keyboards/handwired/jotpad16/jotpad16.c index dfff7e1679..439cfc7b1e 100644 --- a/keyboards/handwired/jotpad16/jotpad16.c +++ b/keyboards/handwired/jotpad16/jotpad16.c @@ -1,6 +1,6 @@ #include "jotpad16.h" -void keyboard_pre_init_kb() { +void keyboard_pre_init_kb(void) { setPinOutput(JOTPAD16_LED1); setPinOutput(JOTPAD16_LED2); diff --git a/keyboards/handwired/jotpad16/rules.mk b/keyboards/handwired/jotpad16/rules.mk index b746275c89..39356ef6f6 100644 --- a/keyboards/handwired/jotpad16/rules.mk +++ b/keyboards/handwired/jotpad16/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - -LAYOUTS = ortho_4x4 diff --git a/keyboards/handwired/jscotto/scotto36/keymaps/default/keymap.c b/keyboards/handwired/jscotto/scotto36/keymaps/default/keymap.c index cd9b1599a5..ad8451ac09 100644 --- a/keyboards/handwired/jscotto/scotto36/keymaps/default/keymap.c +++ b/keyboards/handwired/jscotto/scotto36/keymaps/default/keymap.c @@ -26,7 +26,7 @@ enum { TD_ESC_WINDOWS_EMOJI }; -void td_esc_spotlight_emoji (qk_tap_dance_state_t *state, void *user_data) { +void td_esc_spotlight_emoji (tap_dance_state_t *state, void *user_data) { if (state->count == 1) { tap_code(KC_ESC); } else if (state->count == 2) { @@ -36,7 +36,7 @@ void td_esc_spotlight_emoji (qk_tap_dance_state_t *state, void *user_data) { } } -void td_esc_windows_emoji (qk_tap_dance_state_t *state, void *user_data) { +void td_esc_windows_emoji (tap_dance_state_t *state, void *user_data) { if (state->count == 1) { tap_code(KC_ESC); } else if (state->count == 2) { @@ -47,7 +47,7 @@ void td_esc_windows_emoji (qk_tap_dance_state_t *state, void *user_data) { }; // Tap Dance definitions -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { [TD_ESC_SPOTLIGHT_EMOJI] = ACTION_TAP_DANCE_FN(td_esc_spotlight_emoji), [TD_ESC_WINDOWS_EMOJI] = ACTION_TAP_DANCE_FN(td_esc_windows_emoji) }; @@ -216,7 +216,7 @@ static void render_animation(void) { } // Draw to OLED -bool oled_task_user() { +bool oled_task_user(void) { // Render Bongo Cat render_animation(); diff --git a/keyboards/handwired/jscotto/scotto40/keymaps/default/keymap.c b/keyboards/handwired/jscotto/scotto40/keymaps/default/keymap.c index adfcdc559c..ba5f7bc7a8 100644 --- a/keyboards/handwired/jscotto/scotto40/keymaps/default/keymap.c +++ b/keyboards/handwired/jscotto/scotto40/keymaps/default/keymap.c @@ -23,7 +23,7 @@ enum { TD_ESC_WINDOWS_EMOJI }; -void td_esc_spotlight_emoji (qk_tap_dance_state_t *state, void *user_data) { +void td_esc_spotlight_emoji (tap_dance_state_t *state, void *user_data) { if (state->count == 1) { tap_code(KC_ESC); } else if (state->count == 2) { @@ -33,7 +33,7 @@ void td_esc_spotlight_emoji (qk_tap_dance_state_t *state, void *user_data) { } } -void td_esc_windows_emoji (qk_tap_dance_state_t *state, void *user_data) { +void td_esc_windows_emoji (tap_dance_state_t *state, void *user_data) { if (state->count == 1) { tap_code(KC_ESC); } else if (state->count == 2) { @@ -44,7 +44,7 @@ void td_esc_windows_emoji (qk_tap_dance_state_t *state, void *user_data) { }; // Tap Dance definitions -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { [TD_ESC_SPOTLIGHT_EMOJI] = ACTION_TAP_DANCE_FN(td_esc_spotlight_emoji), [TD_ESC_WINDOWS_EMOJI] = ACTION_TAP_DANCE_FN(td_esc_windows_emoji) }; diff --git a/keyboards/handwired/jscotto/scotto9/info.json b/keyboards/handwired/jscotto/scotto9/info.json index 09ae9eea77..d29ccc3fd1 100644 --- a/keyboards/handwired/jscotto/scotto9/info.json +++ b/keyboards/handwired/jscotto/scotto9/info.json @@ -31,12 +31,12 @@ "layout": [ { "matrix": [0, 0], "x": 0, "y": 0 }, { "matrix": [0, 1], "x": 1, "y": 0 }, - { "matrix": [0, 2], "x": 2, "y": 0 } + { "matrix": [0, 2], "x": 2, "y": 0 }, // Row 2 { "matrix": [1, 0], "x": 0, "y": 1 }, { "matrix": [1, 1], "x": 1, "y": 1 }, - { "matrix": [1, 2], "x": 2, "y": 1 } + { "matrix": [1, 2], "x": 2, "y": 1 }, // Row 3 { "matrix": [2, 0], "x": 0, "y": 2 }, diff --git a/keyboards/handwired/jscotto/scottocmd/config.h b/keyboards/handwired/jscotto/scottocmd/config.h index db72806f86..a168f0ef21 100644 --- a/keyboards/handwired/jscotto/scottocmd/config.h +++ b/keyboards/handwired/jscotto/scottocmd/config.h @@ -17,9 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -// Define tab key for boot magic -#define BOOTMAGIC_LITE_ROW 1 -#define BOOTMAGIC_LITE_COLUMN 0 - // OLED #define OLED_DISPLAY_128X64
\ No newline at end of file diff --git a/keyboards/handwired/jscotto/scottocmd/info.json b/keyboards/handwired/jscotto/scottocmd/info.json index b2040fb7ab..51bf76595d 100644 --- a/keyboards/handwired/jscotto/scottocmd/info.json +++ b/keyboards/handwired/jscotto/scottocmd/info.json @@ -38,6 +38,9 @@ "pid": "0x0000", "vid": "0xFEED" }, + "bootmagic": { + "matrix": [1, 0] + }, "layouts": { "LAYOUT_ortho_4_3x10_4": { "layout": [ diff --git a/keyboards/handwired/jscotto/scottocmd/keymaps/default/keymap.c b/keyboards/handwired/jscotto/scottocmd/keymaps/default/keymap.c index 398178bf5b..b1c77ae944 100644 --- a/keyboards/handwired/jscotto/scottocmd/keymaps/default/keymap.c +++ b/keyboards/handwired/jscotto/scottocmd/keymaps/default/keymap.c @@ -26,7 +26,7 @@ enum { TD_ESC_WINDOWS_EMOJI }; -void td_esc_spotlight_emoji (qk_tap_dance_state_t *state, void *user_data) { +void td_esc_spotlight_emoji (tap_dance_state_t *state, void *user_data) { if (state->count == 1) { tap_code(KC_ESC); } else if (state->count == 2) { @@ -36,7 +36,7 @@ void td_esc_spotlight_emoji (qk_tap_dance_state_t *state, void *user_data) { } } -void td_esc_windows_emoji (qk_tap_dance_state_t *state, void *user_data) { +void td_esc_windows_emoji (tap_dance_state_t *state, void *user_data) { if (state->count == 1) { tap_code(KC_ESC); } else if (state->count == 2) { @@ -47,7 +47,7 @@ void td_esc_windows_emoji (qk_tap_dance_state_t *state, void *user_data) { }; // Tap Dance definitions -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { [TD_ESC_SPOTLIGHT_EMOJI] = ACTION_TAP_DANCE_FN(td_esc_spotlight_emoji), [TD_ESC_WINDOWS_EMOJI] = ACTION_TAP_DANCE_FN(td_esc_windows_emoji) }; @@ -349,7 +349,7 @@ static void render_animation(void) { } // Draw to OLED -bool oled_task_user() { +bool oled_task_user(void) { // Caps lock text led_t led_state = host_keyboard_led_state(); oled_set_cursor(0,1); diff --git a/keyboards/handwired/jscotto/scottostarter/info.json b/keyboards/handwired/jscotto/scottostarter/info.json index 5bc3c14cc7..08bccff0d3 100644 --- a/keyboards/handwired/jscotto/scottostarter/info.json +++ b/keyboards/handwired/jscotto/scottostarter/info.json @@ -87,8 +87,8 @@ { "matrix": [4, 2], "x": 2, "y": 4}, { "matrix": [4, 4], "x": 4, "y": 4}, { "matrix": [4, 7], "x": 7, "y": 4}, - { "matrix": [4, 8], "x": 8, "y": 4 } - { "matrix": [4, 9], "x": 9, "y": 4 } + { "matrix": [4, 8], "x": 8, "y": 4 }, + { "matrix": [4, 9], "x": 9, "y": 4 }, { "matrix": [4, 10], "x": 10, "y": 4 } ] } diff --git a/keyboards/handwired/jtallbean/split_65/config.h b/keyboards/handwired/jtallbean/split_65/config.h index 26d49cecb1..781bff90f3 100644 --- a/keyboards/handwired/jtallbean/split_65/config.h +++ b/keyboards/handwired/jtallbean/split_65/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 10 // Double rows for split keyboards. split_65 has 5, so define 10 -#define MATRIX_COLS 9 /* * Keyboard Matrix Assignments @@ -41,69 +36,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 #define SPLIT_HAND_PIN D5 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -119,7 +58,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/jtallbean/split_65/info.json b/keyboards/handwired/jtallbean/split_65/info.json index 0cc04c93dc..6adb995ff7 100644 --- a/keyboards/handwired/jtallbean/split_65/info.json +++ b/keyboards/handwired/jtallbean/split_65/info.json @@ -8,6 +8,11 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/handwired/jtallbean/split_65/rules.mk b/keyboards/handwired/jtallbean/split_65/rules.mk index 898951758f..c644dd59ee 100644 --- a/keyboards/handwired/jtallbean/split_65/rules.mk +++ b/keyboards/handwired/jtallbean/split_65/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/juliet/config.h b/keyboards/handwired/juliet/config.h index 3dbf0ae715..df5d4248ca 100644 --- a/keyboards/handwired/juliet/config.h +++ b/keyboards/handwired/juliet/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 /* * Keyboard Matrix Assignments @@ -42,64 +37,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -115,8 +57,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 -*/ diff --git a/keyboards/handwired/juliet/info.json b/keyboards/handwired/juliet/info.json index 053b662e4d..0fc7f4726f 100644 --- a/keyboards/handwired/juliet/info.json +++ b/keyboards/handwired/juliet/info.json @@ -8,6 +8,8 @@ "pid": "0x4069", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT_all": { "layout": [{"label":"1.5u", "x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"label":"1.5u", "x":11.5, "y":0, "w":1.5}, {"label":"1.75u", "x":0, "y":1, "w":1.75}, {"x":1.75, "y":1}, {"x":2.75, "y":1}, {"x":3.75, "y":1}, {"x":4.75, "y":1}, {"x":5.75, "y":1}, {"x":6.75, "y":1}, {"x":7.75, "y":1}, {"x":8.75, "y":1}, {"x":9.75, "y":1}, {"label":"2.25u", "x":10.75, "y":1, "w":2.25}, {"label":"1.25u", "x":0, "y":2, "w":1.25}, {"x":1.25, "y":2}, {"x":2.25, "y":2}, {"x":3.25, "y":2}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2}, {"label":"1.75u", "x":11.25, "y":2, "w":1.75}, {"label":"1.25u", "x":0, "y":3, "w":1.25}, {"label":"1u", "x":1.25, "y":3}, {"label":"1.25u", "x":2.25, "y":3, "w":1.25}, {"label":"2.25u", "x":3.5, "y":3, "w":2.25}, {"label":"1u", "x":5.75, "y":3}, {"label":"2.75u", "x":6.75, "y":3, "w":2.75}, {"label":"1.25u", "x":9.5, "y":3, "w":1.25}, {"label":"1u", "x":10.75, "y":3}, {"label":"1.25u", "x":11.75, "y":3, "w":1.25}] diff --git a/keyboards/handwired/juliet/rules.mk b/keyboards/handwired/juliet/rules.mk index 35dd707645..fa6fbf34d9 100644 --- a/keyboards/handwired/juliet/rules.mk +++ b/keyboards/handwired/juliet/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/k8split/config.h b/keyboards/handwired/k8split/config.h index 58708012f6..e8e7ad9411 100644 --- a/keyboards/handwired/k8split/config.h +++ b/keyboards/handwired/k8split/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 8 /* * Keyboard Matrix Assignments diff --git a/keyboards/handwired/k8split/info.json b/keyboards/handwired/k8split/info.json index c4da6abfb4..900871f88a 100644 --- a/keyboards/handwired/k8split/info.json +++ b/keyboards/handwired/k8split/info.json @@ -8,6 +8,8 @@ "pid": "0xC868", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/k8split/rules.mk b/keyboards/handwired/k8split/rules.mk index 172f6cbeca..3e66b069b3 100644 --- a/keyboards/handwired/k8split/rules.mk +++ b/keyboards/handwired/k8split/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/k_numpad17/config.h b/keyboards/handwired/k_numpad17/config.h index ebe38b9d31..0fd1452887 100644 --- a/keyboards/handwired/k_numpad17/config.h +++ b/keyboards/handwired/k_numpad17/config.h @@ -17,14 +17,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" #define TAPPING_TERM 400 -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 4 - // ROWS: Top to bottom, COLS: Left to right #define MATRIX_ROW_PINS { D1, D4, C6, D7, E6 } @@ -33,10 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/k_numpad17/info.json b/keyboards/handwired/k_numpad17/info.json index 10dc814fc7..1ea003178b 100644 --- a/keyboards/handwired/k_numpad17/info.json +++ b/keyboards/handwired/k_numpad17/info.json @@ -8,6 +8,9 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", + "community_layouts": ["numpad_5x4"], "layouts": { "LAYOUT_numpad_5x4": { "layout": [ diff --git a/keyboards/handwired/k_numpad17/keymaps/karlssn/keymap.c b/keyboards/handwired/k_numpad17/keymaps/karlssn/keymap.c index c2f314116b..fdbc3c8a39 100644 --- a/keyboards/handwired/k_numpad17/keymaps/karlssn/keymap.c +++ b/keyboards/handwired/k_numpad17/keymaps/karlssn/keymap.c @@ -6,7 +6,7 @@ enum { }; //Tap Dance Definitions -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { //Tap once for Esc, twice for Caps Lock [TD_DOT_COMMAS] = ACTION_TAP_DANCE_DOUBLE(KC_DOT, KC_COMMA) // Other declarations would go here, separated by commas, if you have them diff --git a/keyboards/handwired/k_numpad17/rules.mk b/keyboards/handwired/k_numpad17/rules.mk index 4cb57769e9..d090183808 100644 --- a/keyboards/handwired/k_numpad17/rules.mk +++ b/keyboards/handwired/k_numpad17/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no - -LAYOUTS = numpad_5x4 diff --git a/keyboards/handwired/kbod/config.h b/keyboards/handwired/kbod/config.h index 6a9ea21270..2366898f05 100644 --- a/keyboards/handwired/kbod/config.h +++ b/keyboards/handwired/kbod/config.h @@ -17,22 +17,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 8 #define MATRIX_ROW_PINS { C6, D7, E6, B4, B5, B6, B7, D6 } #define MATRIX_COL_PINS { D0, D1, F0, F1, F4, F5, F6, F7 } #define DIODE_DIRECTION COL2ROW -#define LED_CAPS_LOCK_PIN B0 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/kbod/info.json b/keyboards/handwired/kbod/info.json index 3c62ad9f74..6ce0f46f2c 100644 --- a/keyboards/handwired/kbod/info.json +++ b/keyboards/handwired/kbod/info.json @@ -8,6 +8,11 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "B0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/kbod/rules.mk b/keyboards/handwired/kbod/rules.mk index 8d562b0bd1..14ece75f47 100644 --- a/keyboards/handwired/kbod/rules.mk +++ b/keyboards/handwired/kbod/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/ks63/config.h b/keyboards/handwired/ks63/config.h index 31ea4bbe32..1a75229c51 100644 --- a/keyboards/handwired/ks63/config.h +++ b/keyboards/handwired/ks63/config.h @@ -18,11 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 10 -#define MATRIX_COLS 8 /* key matrix pins */ #define MATRIX_ROW_PINS { B5, B4, E6, D7, C6 } @@ -37,12 +32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* serial.c configuration for split keyboard */ -#define SOFT_SERIAL_PIN D0 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/ks63/info.json b/keyboards/handwired/ks63/info.json index 600bd2252d..df7bf5c645 100644 --- a/keyboards/handwired/ks63/info.json +++ b/keyboards/handwired/ks63/info.json @@ -8,6 +8,11 @@ "pid": "0x3061", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/ks63/rules.mk b/keyboards/handwired/ks63/rules.mk index c54f041bc3..12dd064c62 100644 --- a/keyboards/handwired/ks63/rules.mk +++ b/keyboards/handwired/ks63/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/lagrange/config.h b/keyboards/handwired/lagrange/config.h index 14a5767272..618862f2e2 100644 --- a/keyboards/handwired/lagrange/config.h +++ b/keyboards/handwired/lagrange/config.h @@ -16,15 +16,10 @@ #pragma once -#include "config_common.h" #define EE_HANDS #define SPLIT_USB_DETECT -/* key matrix size */ -#define MATRIX_ROWS 14 -#define MATRIX_COLS 6 - /* pin-out */ #define MATRIX_ROW_PINS { E6, F1, F0, F4, F5, F6, F7 } #define MATRIX_COL_PINS { B4, B5, D7, B6, C6, D6 } @@ -33,8 +28,3 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION ROW2COL - -#define DEBOUNCE 5 - -#define LED_CAPS_LOCK_PIN D1 -#define LED_SCROLL_LOCK_PIN D2 diff --git a/keyboards/handwired/lagrange/info.json b/keyboards/handwired/lagrange/info.json index 9dd3891ebc..7d1179e1f4 100644 --- a/keyboards/handwired/lagrange/info.json +++ b/keyboards/handwired/lagrange/info.json @@ -8,6 +8,12 @@ "pid": "0x2718", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "D1", + "scroll_lock": "D2" + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/lagrange/keymaps/dpapavas/keymap.c b/keyboards/handwired/lagrange/keymaps/dpapavas/keymap.c index 5f221904e9..8d2ecd9c79 100644 --- a/keyboards/handwired/lagrange/keymaps/dpapavas/keymap.c +++ b/keyboards/handwired/lagrange/keymaps/dpapavas/keymap.c @@ -78,7 +78,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { #define CHOREOGRAPH(DANCE, PRESS, RELEASE, TAP, DOUBLETAP) \ static bool dance_ ## DANCE ## _pressed; \ \ - void dance_ ## DANCE ## _finished(qk_tap_dance_state_t *state, void *user_data) { \ + void dance_ ## DANCE ## _finished(tap_dance_state_t *state, void *user_data) { \ if (state->count == 1) { \ if (state->pressed) { \ dance_ ## DANCE ## _pressed = true; \ @@ -93,7 +93,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { } \ } \ \ - void dance_ ## DANCE ## _reset(qk_tap_dance_state_t *state, void *user_data) { \ + void dance_ ## DANCE ## _reset(tap_dance_state_t *state, void *user_data) { \ if (state->count == 1) { \ if (dance_ ## DANCE ## _pressed) { \ RELEASE; \ @@ -138,7 +138,7 @@ CHOREOGRAPH(TD_C_X, SEND_STRING(SS_UP(X_LCTL)), SEND_STRING(SS_DOWN(X_LCTL) SS_TAP(X_X) SS_UP(X_LCTL)),); -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { STEPS(TD_LEFT), STEPS(TD_RGHT), STEPS(TD_C_X) }; diff --git a/keyboards/handwired/lagrange/rules.mk b/keyboards/handwired/lagrange/rules.mk index 574caf2395..61bfdfa4d3 100644 --- a/keyboards/handwired/lagrange/rules.mk +++ b/keyboards/handwired/lagrange/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/leftynumpad/config.h b/keyboards/handwired/leftynumpad/config.h index e05ceae098..3f59e84459 100644 --- a/keyboards/handwired/leftynumpad/config.h +++ b/keyboards/handwired/leftynumpad/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 5 /* * Keyboard Matrix Assignments @@ -38,42 +33,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 10 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/leftynumpad/info.json b/keyboards/handwired/leftynumpad/info.json index c25e9c758e..ffa7915a7d 100644 --- a/keyboards/handwired/leftynumpad/info.json +++ b/keyboards/handwired/leftynumpad/info.json @@ -8,6 +8,9 @@ "pid": "0xBEEF", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "debounce": 10, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/leftynumpad/rules.mk b/keyboards/handwired/leftynumpad/rules.mk index 1275531ef6..ab2c49da70 100644 --- a/keyboards/handwired/leftynumpad/rules.mk +++ b/keyboards/handwired/leftynumpad/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/lemonpad/config.h b/keyboards/handwired/lemonpad/config.h index dfa1184a92..966e3d16f6 100644 --- a/keyboards/handwired/lemonpad/config.h +++ b/keyboards/handwired/lemonpad/config.h @@ -16,85 +16,11 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 3 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ - -#define DIRECT_PINS { \ - { E6, D7, C6 }, \ - { B4, B5, D4 } \ -} - -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - -//#define RGB_DI_PIN E2 -//#ifdef RGB_DI_PIN -//# define RGBLED_NUM 16 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -//#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -110,7 +36,3 @@ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/lemonpad/info.json b/keyboards/handwired/lemonpad/info.json index e2824f8fa7..9cbcf4f4f7 100644 --- a/keyboards/handwired/lemonpad/info.json +++ b/keyboards/handwired/lemonpad/info.json @@ -8,6 +8,14 @@ "pid": "0x4C50", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["E6", "D7", "C6"], + ["B4", "B5", "D4"] + ] + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/lemonpad/rules.mk b/keyboards/handwired/lemonpad/rules.mk index 6174b9bd66..1b7b1b36a4 100644 --- a/keyboards/handwired/lemonpad/rules.mk +++ b/keyboards/handwired/lemonpad/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/lovelive9/config.h b/keyboards/handwired/lovelive9/config.h index 771c26f3d7..87ba736bb9 100644 --- a/keyboards/handwired/lovelive9/config.h +++ b/keyboards/handwired/lovelive9/config.h @@ -1,11 +1,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 9 /* default pin-out */ #define MATRIX_ROW_PINS { NO_PIN } diff --git a/keyboards/handwired/lovelive9/info.json b/keyboards/handwired/lovelive9/info.json index 7f8bd65fae..13931f8f45 100644 --- a/keyboards/handwired/lovelive9/info.json +++ b/keyboards/handwired/lovelive9/info.json @@ -8,6 +8,8 @@ "pid": "0x0007", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/lovelive9/rules.mk b/keyboards/handwired/lovelive9/rules.mk index d835456fe5..f99fed15e7 100644 --- a/keyboards/handwired/lovelive9/rules.mk +++ b/keyboards/handwired/lovelive9/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/m40/5x5_macropad/config.h b/keyboards/handwired/m40/5x5_macropad/config.h index fb9938c9d6..2061849845 100644 --- a/keyboards/handwired/m40/5x5_macropad/config.h +++ b/keyboards/handwired/m40/5x5_macropad/config.h @@ -3,11 +3,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 5 /* * Keyboard Matrix Assignments @@ -25,44 +20,11 @@ /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/m40/5x5_macropad/info.json b/keyboards/handwired/m40/5x5_macropad/info.json index 1b0d95bf2d..3e9138af27 100644 --- a/keyboards/handwired/m40/5x5_macropad/info.json +++ b/keyboards/handwired/m40/5x5_macropad/info.json @@ -8,6 +8,8 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT_ortho_5x5": { "layout": [ diff --git a/keyboards/handwired/m40/5x5_macropad/rules.mk b/keyboards/handwired/m40/5x5_macropad/rules.mk index d43ced4ed4..fe66abc849 100644 --- a/keyboards/handwired/m40/5x5_macropad/rules.mk +++ b/keyboards/handwired/m40/5x5_macropad/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/macroboard/config.h b/keyboards/handwired/macroboard/config.h index 0d2aba2a38..4063b253b6 100644 --- a/keyboards/handwired/macroboard/config.h +++ b/keyboards/handwired/macroboard/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 6 /* * Keyboard Matrix Assignments @@ -63,9 +58,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_EFFECT_ALTERNATING #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/macroboard/f401/config.h b/keyboards/handwired/macroboard/f401/config.h index 5d59d59788..c5ea2ff6a2 100644 --- a/keyboards/handwired/macroboard/f401/config.h +++ b/keyboards/handwired/macroboard/f401/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" #define MATRIX_ROW_PINS { A4, A3, A2, A1, A0 } #define MATRIX_COL_PINS { A5, A6, A7, B0, B1, B10 } diff --git a/keyboards/handwired/macroboard/f401/info.json b/keyboards/handwired/macroboard/f401/info.json new file mode 100644 index 0000000000..acd7e83f77 --- /dev/null +++ b/keyboards/handwired/macroboard/f401/info.json @@ -0,0 +1,5 @@ +{ + "processor": "STM32F401", + "bootloader": "stm32-dfu", + "board": "BLACKPILL_STM32_F401" +} diff --git a/keyboards/handwired/macroboard/f401/rules.mk b/keyboards/handwired/macroboard/f401/rules.mk index 3ce53701da..65dc4b89cd 100644 --- a/keyboards/handwired/macroboard/f401/rules.mk +++ b/keyboards/handwired/macroboard/f401/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F401 -BOARD = BLACKPILL_STM32_F401 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/macroboard/f411/config.h b/keyboards/handwired/macroboard/f411/config.h index 03fd00d182..c7004fd520 100644 --- a/keyboards/handwired/macroboard/f411/config.h +++ b/keyboards/handwired/macroboard/f411/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" #define MATRIX_ROW_PINS { A15, B3, B4, B5, B7 } #define MATRIX_COL_PINS { B12, B13, B14, B15, A8, A10 } diff --git a/keyboards/handwired/macroboard/f411/info.json b/keyboards/handwired/macroboard/f411/info.json new file mode 100644 index 0000000000..2517a82403 --- /dev/null +++ b/keyboards/handwired/macroboard/f411/info.json @@ -0,0 +1,5 @@ +{ + "processor": "STM32F411", + "bootloader": "stm32-dfu", + "board": "BLACKPILL_STM32_F411" +} diff --git a/keyboards/handwired/macroboard/f411/rules.mk b/keyboards/handwired/macroboard/f411/rules.mk index 0a580be07a..2c7c409197 100644 --- a/keyboards/handwired/macroboard/f411/rules.mk +++ b/keyboards/handwired/macroboard/f411/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F411 -BOARD = BLACKPILL_STM32_F411 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/magicforce61/config.h b/keyboards/handwired/magicforce61/config.h index ab24503ea0..2518265be6 100644 --- a/keyboards/handwired/magicforce61/config.h +++ b/keyboards/handwired/magicforce61/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 /* * Keyboard Matrix Assignments @@ -39,45 +34,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/handwired/magicforce61/info.json b/keyboards/handwired/magicforce61/info.json index 2a69b22e2f..9652a35ba5 100644 --- a/keyboards/handwired/magicforce61/info.json +++ b/keyboards/handwired/magicforce61/info.json @@ -8,6 +8,8 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "at90usb1286", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/magicforce61/rules.mk b/keyboards/handwired/magicforce61/rules.mk index b521ebe7dd..b6e2a5f9a4 100644 --- a/keyboards/handwired/magicforce61/rules.mk +++ b/keyboards/handwired/magicforce61/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/magicforce68/config.h b/keyboards/handwired/magicforce68/config.h index 7eab860061..b4c67fbbd7 100644 --- a/keyboards/handwired/magicforce68/config.h +++ b/keyboards/handwired/magicforce68/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 /* * Keyboard Matrix Assignments @@ -39,45 +34,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/handwired/magicforce68/info.json b/keyboards/handwired/magicforce68/info.json index 82f329e29d..c1df42eed8 100644 --- a/keyboards/handwired/magicforce68/info.json +++ b/keyboards/handwired/magicforce68/info.json @@ -8,6 +8,8 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/magicforce68/rules.mk b/keyboards/handwired/magicforce68/rules.mk index 63aadefc79..b6e2a5f9a4 100644 --- a/keyboards/handwired/magicforce68/rules.mk +++ b/keyboards/handwired/magicforce68/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/marauder/config.h b/keyboards/handwired/marauder/config.h index 3873048f7a..608411ef31 100644 --- a/keyboards/handwired/marauder/config.h +++ b/keyboards/handwired/marauder/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 9 /* * Keyboard Matrix Assignments diff --git a/keyboards/handwired/marauder/info.json b/keyboards/handwired/marauder/info.json index 8c0e23fafb..16fdc30e26 100644 --- a/keyboards/handwired/marauder/info.json +++ b/keyboards/handwired/marauder/info.json @@ -8,6 +8,8 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/marauder/rules.mk b/keyboards/handwired/marauder/rules.mk index 8fa2de12ba..a14973e3ef 100644 --- a/keyboards/handwired/marauder/rules.mk +++ b/keyboards/handwired/marauder/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/mechboards_micropad/config.h b/keyboards/handwired/mechboards_micropad/config.h index 066118bd2c..ac759e6771 100644 --- a/keyboards/handwired/mechboards_micropad/config.h +++ b/keyboards/handwired/mechboards_micropad/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 4 /* * Keyboard Matrix Assignments @@ -39,64 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -112,7 +54,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/mechboards_micropad/info.json b/keyboards/handwired/mechboards_micropad/info.json index aefc0b89c0..e5e848fd71 100644 --- a/keyboards/handwired/mechboards_micropad/info.json +++ b/keyboards/handwired/mechboards_micropad/info.json @@ -8,6 +8,8 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [{"label":"1", "x":0, "y":0}, {"label":"2", "x":1, "y":0}, {"label":"3", "x":2, "y":0}, {"label":"4", "x":3, "y":0}] diff --git a/keyboards/handwired/mechboards_micropad/rules.mk b/keyboards/handwired/mechboards_micropad/rules.mk index 339bf624d0..d4acd7ecd1 100644 --- a/keyboards/handwired/mechboards_micropad/rules.mk +++ b/keyboards/handwired/mechboards_micropad/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/meck_tkl/blackpill_f401/config.h b/keyboards/handwired/meck_tkl/blackpill_f401/config.h index eff5d5d81f..dcf0a27d21 100644 --- a/keyboards/handwired/meck_tkl/blackpill_f401/config.h +++ b/keyboards/handwired/meck_tkl/blackpill_f401/config.h @@ -7,6 +7,3 @@ { B15, A8, A9, B14, A15, B3 } #define MATRIX_COL_PINS \ { B4, B5, B6, B7, B8, B9, A1, A2, A3, A4, A5, A6, A7, B0, B1, A0, B10 } - -#define LED_CAPS_LOCK_PIN C13 -#define LED_PIN_ON_STATE 0 diff --git a/keyboards/handwired/meck_tkl/blackpill_f401/info.json b/keyboards/handwired/meck_tkl/blackpill_f401/info.json new file mode 100644 index 0000000000..68df328ac7 --- /dev/null +++ b/keyboards/handwired/meck_tkl/blackpill_f401/info.json @@ -0,0 +1,9 @@ +{ + "indicators": { + "caps_lock": "C13", + "on_state": 0 + }, + "processor": "STM32F401", + "bootloader": "stm32-dfu", + "board": "BLACKPILL_STM32_F401" +} diff --git a/keyboards/handwired/meck_tkl/blackpill_f401/rules.mk b/keyboards/handwired/meck_tkl/blackpill_f401/rules.mk index d2eae19dfb..b5f27c93ea 100644 --- a/keyboards/handwired/meck_tkl/blackpill_f401/rules.mk +++ b/keyboards/handwired/meck_tkl/blackpill_f401/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F401 -BOARD = BLACKPILL_STM32_F401 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/meck_tkl/config.h b/keyboards/handwired/meck_tkl/config.h index 07fd3dd314..06430fffeb 100644 --- a/keyboards/handwired/meck_tkl/config.h +++ b/keyboards/handwired/meck_tkl/config.h @@ -3,11 +3,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 17 /* * Keyboard Matrix Assignments @@ -23,14 +18,7 @@ /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/minorca/config.h b/keyboards/handwired/minorca/config.h index 4c27d9da4d..1ba390acf9 100644 --- a/keyboards/handwired/minorca/config.h +++ b/keyboards/handwired/minorca/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 /* MinOrca PCB default pin-out */ #define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, F7, F6, F5, F4, F1, F0 } @@ -30,15 +25,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ #define BACKLIGHT_LEVELS 3 -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/minorca/info.json b/keyboards/handwired/minorca/info.json index 34b2539a11..b91e59ca67 100644 --- a/keyboards/handwired/minorca/info.json +++ b/keyboards/handwired/minorca/info.json @@ -8,6 +8,8 @@ "pid": "0x6660", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/minorca/keymaps/rgb/keymap.c b/keyboards/handwired/minorca/keymaps/rgb/keymap.c index c99a255e40..43438d2d98 100644 --- a/keyboards/handwired/minorca/keymaps/rgb/keymap.c +++ b/keyboards/handwired/minorca/keymaps/rgb/keymap.c @@ -13,32 +13,32 @@ extern keymap_config_t keymap_config; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT( /* Qwerty */ \ - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - LT(_TB, KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, MT(MOD_RSFT, KC_ENT), \ - KC_LCTL, KC_LGUI, KC_LALT, LT(_RAISE, KC_SPC), LT(_LOWER, KC_SPC), KC_RALT, KC_APP, KC_RCTL \ + [_QWERTY] = LAYOUT( /* Qwerty */ + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + LT(_TB, KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, MT(MOD_RSFT, KC_ENT), + KC_LCTL, KC_LGUI, KC_LALT, LT(_RAISE, KC_SPC), LT(_LOWER, KC_SPC), KC_RALT, KC_APP, KC_RCTL ), - [_RAISE] = LAYOUT( \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ - _______, _______, _______, KC_PAUS, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_PIPE, \ - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_ENT, \ - _______, _______, _______, _______, _______, KC_MNXT, KC_MUTE, KC_MPLY \ + [_RAISE] = LAYOUT( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + _______, _______, _______, KC_PAUS, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_PIPE, + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_ENT, + _______, _______, _______, _______, _______, KC_MNXT, KC_MUTE, KC_MPLY ), - [_LOWER] = LAYOUT( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ - _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_BSLS, \ - _______, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_PGUP, KC_ENT, \ - _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ + [_LOWER] = LAYOUT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_BSLS, + _______, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_PGUP, KC_ENT, + _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END ), - [_TB] = LAYOUT( /* Tab */ \ - KC_ESC, KC_CALC, KC_WHOM, KC_MAIL, KC_MYCM, _______, _______, _______, _______, _______, KC_PSCR, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_UP, KC_ENT, \ - BL_STEP, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT \ + [_TB] = LAYOUT( /* Tab */ + KC_ESC, KC_CALC, KC_WHOM, KC_MAIL, KC_MYCM, _______, _______, _______, _______, _______, KC_PSCR, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_UP, KC_ENT, + BL_STEP, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT ) }; diff --git a/keyboards/handwired/minorca/rules.mk b/keyboards/handwired/minorca/rules.mk index ec925a763e..283a46b6ae 100644 --- a/keyboards/handwired/minorca/rules.mk +++ b/keyboards/handwired/minorca/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/misterdeck/info.json b/keyboards/handwired/misterdeck/info.json index 20d74d8e3c..94fb213025 100644 --- a/keyboards/handwired/misterdeck/info.json +++ b/keyboards/handwired/misterdeck/info.json @@ -8,6 +8,8 @@ "pid": "0x6969", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "diode_direction": "ROW2COL", "matrix_pins": { "cols": ["D7", "E6", "B4", "B5"], diff --git a/keyboards/handwired/misterdeck/rules.mk b/keyboards/handwired/misterdeck/rules.mk index 7479d0121f..20825c8cfa 100644 --- a/keyboards/handwired/misterdeck/rules.mk +++ b/keyboards/handwired/misterdeck/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/ms_sculpt_mobile/astar/info.json b/keyboards/handwired/ms_sculpt_mobile/astar/info.json index bbdfe24cf3..6f6786e9ad 100644 --- a/keyboards/handwired/ms_sculpt_mobile/astar/info.json +++ b/keyboards/handwired/ms_sculpt_mobile/astar/info.json @@ -1,3 +1,5 @@ { - "keyboard_name": "sculpt mobile astar" + "keyboard_name": "sculpt mobile astar", + "processor": "atmega32u4", + "bootloader": "caterina" } diff --git a/keyboards/handwired/ms_sculpt_mobile/astar/rules.mk b/keyboards/handwired/ms_sculpt_mobile/astar/rules.mk index cf663a7ed6..e69de29bb2 100644 --- a/keyboards/handwired/ms_sculpt_mobile/astar/rules.mk +++ b/keyboards/handwired/ms_sculpt_mobile/astar/rules.mk @@ -1,5 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina diff --git a/keyboards/handwired/ms_sculpt_mobile/config.h b/keyboards/handwired/ms_sculpt_mobile/config.h index 54bc2689a2..27fba0b887 100644 --- a/keyboards/handwired/ms_sculpt_mobile/config.h +++ b/keyboards/handwired/ms_sculpt_mobile/config.h @@ -17,33 +17,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 18 /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION ROW2COL -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/ms_sculpt_mobile/teensy2pp/info.json b/keyboards/handwired/ms_sculpt_mobile/teensy2pp/info.json index e94752a82d..08fc09e4b1 100644 --- a/keyboards/handwired/ms_sculpt_mobile/teensy2pp/info.json +++ b/keyboards/handwired/ms_sculpt_mobile/teensy2pp/info.json @@ -1,3 +1,5 @@ { - "keyboard_name": "sculpt mobile teensypp" + "keyboard_name": "sculpt mobile teensypp", + "processor": "at90usb1286", + "bootloader": "halfkay" } diff --git a/keyboards/handwired/ms_sculpt_mobile/teensy2pp/rules.mk b/keyboards/handwired/ms_sculpt_mobile/teensy2pp/rules.mk index 149471682d..e69de29bb2 100644 --- a/keyboards/handwired/ms_sculpt_mobile/teensy2pp/rules.mk +++ b/keyboards/handwired/ms_sculpt_mobile/teensy2pp/rules.mk @@ -1,5 +0,0 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = halfkay diff --git a/keyboards/handwired/mutepad/config.h b/keyboards/handwired/mutepad/config.h index bc763fc29d..97ba13cd6a 100644 --- a/keyboards/handwired/mutepad/config.h +++ b/keyboards/handwired/mutepad/config.h @@ -3,11 +3,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 4 /* * Keyboard Matrix Assignments @@ -37,33 +32,11 @@ /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ #define FORCE_NKRO /* @@ -76,7 +49,3 @@ /* disable print */ //#define NO_PRINT - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/mutepad/info.json b/keyboards/handwired/mutepad/info.json index 1ae80088eb..408ecffc51 100644 --- a/keyboards/handwired/mutepad/info.json +++ b/keyboards/handwired/mutepad/info.json @@ -8,6 +8,8 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/mutepad/rules.mk b/keyboards/handwired/mutepad/rules.mk index 1a63bd74b1..131aa72aeb 100644 --- a/keyboards/handwired/mutepad/rules.mk +++ b/keyboards/handwired/mutepad/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/myskeeb/config.h b/keyboards/handwired/myskeeb/config.h index 06e8782290..b88e3f0d48 100644 --- a/keyboards/handwired/myskeeb/config.h +++ b/keyboards/handwired/myskeeb/config.h @@ -1,11 +1,5 @@ #pragma once -#include "config_common.h" - -// Key Matrix Size // -// Rows are Doubled-up -#define MATRIX_ROWS 10 -#define MATRIX_COLS 7 // Wiring of Each Half #define DIODE_DIRECTION COL2ROW @@ -15,7 +9,6 @@ // Comunication and Split Detection -#define SOFT_SERIAL_PIN D3 #define SELECT_SOFT_SERIAL_SPEED 1 #define SPLIT_USB_DETECT #define EE_HANDS @@ -31,8 +24,3 @@ // Tap Dance #define TAPPING_TERM 200 - -// Other - -#define DEBOUNCE 0 - diff --git a/keyboards/handwired/myskeeb/info.json b/keyboards/handwired/myskeeb/info.json index 8aff23d617..cabbbf73b8 100644 --- a/keyboards/handwired/myskeeb/info.json +++ b/keyboards/handwired/myskeeb/info.json @@ -8,6 +8,12 @@ "pid": "0x6060", "device_version": "1.0.0" }, + "split": { + "soft_serial_pin": "D3" + }, + "processor": "atmega32u4", + "bootloader": "caterina", + "debounce": 0, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/myskeeb/keymaps/default/keymap.c b/keyboards/handwired/myskeeb/keymaps/default/keymap.c index ee0ead3664..d3a8ba20e8 100644 --- a/keyboards/handwired/myskeeb/keymaps/default/keymap.c +++ b/keyboards/handwired/myskeeb/keymaps/default/keymap.c @@ -12,7 +12,7 @@ enum { }; // Tap Dance Functions -void tri_open(qk_tap_dance_state_t *state, void *user_data) { +void tri_open(tap_dance_state_t *state, void *user_data) { if (state->count == 1) { tap_code16(KC_LPRN); } else if (state->count == 2) { @@ -22,7 +22,7 @@ void tri_open(qk_tap_dance_state_t *state, void *user_data) { } } -void tri_close(qk_tap_dance_state_t *state, void *user_data) { +void tri_close(tap_dance_state_t *state, void *user_data) { if (state->count == 1) { tap_code16(KC_RPRN); } else if (state->count == 2) { @@ -32,7 +32,7 @@ void tri_close(qk_tap_dance_state_t *state, void *user_data) { } } -void dquote(qk_tap_dance_state_t *state, void *user_data) { +void dquote(tap_dance_state_t *state, void *user_data) { if (state->count == 1) { if (state->interrupted) tap_code(KC_QUOT); @@ -44,7 +44,7 @@ void dquote(qk_tap_dance_state_t *state, void *user_data) { } } -void tilded(qk_tap_dance_state_t *state, void *user_data) { +void tilded(tap_dance_state_t *state, void *user_data) { if (state->count == 1) { if (state->interrupted) tap_code16(KC_TILD); @@ -55,7 +55,7 @@ void tilded(qk_tap_dance_state_t *state, void *user_data) { } } -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { [OP_QT] = ACTION_TAP_DANCE_FN(tri_open), [CL_QT] = ACTION_TAP_DANCE_FN(tri_close), [TD_DQ] = ACTION_TAP_DANCE_FN(dquote), diff --git a/keyboards/handwired/myskeeb/rules.mk b/keyboards/handwired/myskeeb/rules.mk index d694be736f..a67d345674 100644 --- a/keyboards/handwired/myskeeb/rules.mk +++ b/keyboards/handwired/myskeeb/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/nicekey/config.h b/keyboards/handwired/nicekey/config.h index 4cb41fc431..f5019df285 100644 --- a/keyboards/handwired/nicekey/config.h +++ b/keyboards/handwired/nicekey/config.h @@ -17,23 +17,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 #define MATRIX_COL_PINS { C6 } #define MATRIX_ROW_PINS { B6 } #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/nicekey/info.json b/keyboards/handwired/nicekey/info.json index 3f965bf1b2..24872ad800 100644 --- a/keyboards/handwired/nicekey/info.json +++ b/keyboards/handwired/nicekey/info.json @@ -8,6 +8,8 @@ "pid": "0x6464", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/nicekey/rules.mk b/keyboards/handwired/nicekey/rules.mk index e311fac590..59c896dbff 100644 --- a/keyboards/handwired/nicekey/rules.mk +++ b/keyboards/handwired/nicekey/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/not_so_minidox/config.h b/keyboards/handwired/not_so_minidox/config.h index 66615a3927..23cc53d3f8 100644 --- a/keyboards/handwired/not_so_minidox/config.h +++ b/keyboards/handwired/not_so_minidox/config.h @@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 8 -#define MATRIX_COLS 6 /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW @@ -31,25 +25,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { D7, E6, B4, B5 } #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, D4 } -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - //#define EE_HANDS #define MASTER_LEFT //#define MASTER_RIGHT -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/not_so_minidox/info.json b/keyboards/handwired/not_so_minidox/info.json index 5d8f7ff960..fa408e6633 100644 --- a/keyboards/handwired/not_so_minidox/info.json +++ b/keyboards/handwired/not_so_minidox/info.json @@ -8,6 +8,11 @@ "pid": "0x3060", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/not_so_minidox/rules.mk b/keyboards/handwired/not_so_minidox/rules.mk index 8f9772df22..8ea05b5f74 100644 --- a/keyboards/handwired/not_so_minidox/rules.mk +++ b/keyboards/handwired/not_so_minidox/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/novem/config.h b/keyboards/handwired/novem/config.h index 81fe2d877f..5758bc41c3 100644 --- a/keyboards/handwired/novem/config.h +++ b/keyboards/handwired/novem/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 3 /* * Keyboard Matrix Assignments @@ -39,9 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/novem/info.json b/keyboards/handwired/novem/info.json index e1699e99e2..656863da64 100644 --- a/keyboards/handwired/novem/info.json +++ b/keyboards/handwired/novem/info.json @@ -8,6 +8,8 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/novem/rules.mk b/keyboards/handwired/novem/rules.mk index ba0ee2cb43..ca9d24172d 100644 --- a/keyboards/handwired/novem/rules.mk +++ b/keyboards/handwired/novem/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/nozbe_macro/config.h b/keyboards/handwired/nozbe_macro/config.h index fe69a0833a..cdcb6d8732 100644 --- a/keyboards/handwired/nozbe_macro/config.h +++ b/keyboards/handwired/nozbe_macro/config.h @@ -17,11 +17,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 4 /* key matrix pins */ #define MATRIX_ROW_PINS \ @@ -32,15 +27,11 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* number of backlight levels */ #define BACKLIGHT_PIN B5 #ifdef BACKLIGHT_PIN # define BACKLIGHT_LEVELS 3 #endif -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/nozbe_macro/info.json b/keyboards/handwired/nozbe_macro/info.json index 57a4751bdb..27b088958b 100644 --- a/keyboards/handwired/nozbe_macro/info.json +++ b/keyboards/handwired/nozbe_macro/info.json @@ -8,6 +8,8 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/nozbe_macro/rules.mk b/keyboards/handwired/nozbe_macro/rules.mk index 1c4073c9ce..b325f3f0c7 100644 --- a/keyboards/handwired/nozbe_macro/rules.mk +++ b/keyboards/handwired/nozbe_macro/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/numpad20/config.h b/keyboards/handwired/numpad20/config.h index 0651b524f8..9c2c66732a 100644 --- a/keyboards/handwired/numpad20/config.h +++ b/keyboards/handwired/numpad20/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 4 /* * Keyboard Matrix Assignments @@ -39,45 +34,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/handwired/numpad20/info.json b/keyboards/handwired/numpad20/info.json index b6b277503a..adc0abec12 100644 --- a/keyboards/handwired/numpad20/info.json +++ b/keyboards/handwired/numpad20/info.json @@ -8,6 +8,8 @@ "pid": "0x0504", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/numpad20/rules.mk b/keyboards/handwired/numpad20/rules.mk index 9b2c210d42..b6e2a5f9a4 100644 --- a/keyboards/handwired/numpad20/rules.mk +++ b/keyboards/handwired/numpad20/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/obuwunkunubi/spaget/config.h b/keyboards/handwired/obuwunkunubi/spaget/config.h index 7b0fc127e8..7743cd6cd6 100644 --- a/keyboards/handwired/obuwunkunubi/spaget/config.h +++ b/keyboards/handwired/obuwunkunubi/spaget/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 4 // ROWS: Top to bottom, COLS: Left to right @@ -31,12 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -//#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/obuwunkunubi/spaget/info.json b/keyboards/handwired/obuwunkunubi/spaget/info.json index 124f74fd3c..ed635d0208 100644 --- a/keyboards/handwired/obuwunkunubi/spaget/info.json +++ b/keyboards/handwired/obuwunkunubi/spaget/info.json @@ -8,6 +8,8 @@ "pid": "0x6969", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/obuwunkunubi/spaget/rules.mk b/keyboards/handwired/obuwunkunubi/spaget/rules.mk index 9a469b22ec..bf275d4f6f 100644 --- a/keyboards/handwired/obuwunkunubi/spaget/rules.mk +++ b/keyboards/handwired/obuwunkunubi/spaget/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/oem_ansi_fullsize/config.h b/keyboards/handwired/oem_ansi_fullsize/config.h index 14e3683a5a..5f31deab10 100644 --- a/keyboards/handwired/oem_ansi_fullsize/config.h +++ b/keyboards/handwired/oem_ansi_fullsize/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 22 /* * Keyboard Matrix Assignments @@ -46,74 +41,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -//#define LED_NUM_LOCK_PIN B0 -//#define LED_CAPS_LOCK_PIN B1 -//#define LED_SCROLL_LOCK_PIN B2 -//#define LED_COMPOSE_PIN B3 -//#define LED_KANA_PIN B4 - -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - -//#define RGB_DI_PIN E2 -//#ifdef RGB_DI_PIN -//# define RGBLED_NUM 16 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -//#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -129,7 +61,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/oem_ansi_fullsize/info.json b/keyboards/handwired/oem_ansi_fullsize/info.json index 9d86df7075..57a3a74df9 100644 --- a/keyboards/handwired/oem_ansi_fullsize/info.json +++ b/keyboards/handwired/oem_ansi_fullsize/info.json @@ -8,6 +8,9 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "at90usb1286", + "bootloader": "halfkay", + "community_layouts": ["fullsize_ansi"], "layouts": { "LAYOUT_fullsize_ansi": { "layout": [ diff --git a/keyboards/handwired/oem_ansi_fullsize/rules.mk b/keyboards/handwired/oem_ansi_fullsize/rules.mk index a0cf1ea43a..6fe874e748 100644 --- a/keyboards/handwired/oem_ansi_fullsize/rules.mk +++ b/keyboards/handwired/oem_ansi_fullsize/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = fullsize_ansi
\ No newline at end of file diff --git a/keyboards/handwired/oem_iso_fullsize/config.h b/keyboards/handwired/oem_iso_fullsize/config.h index 5270c77f47..21b3556bb3 100644 --- a/keyboards/handwired/oem_iso_fullsize/config.h +++ b/keyboards/handwired/oem_iso_fullsize/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 21 /* * Keyboard Matrix Assignments @@ -41,9 +36,6 @@ *Row 3, R129, Pin A2 *Row 4, R128, Pin E5 *Row 5, R127, Pin A7 -#define LED_CAPS_LOCK_PIN C7 -#define LED_SCROLL_LOCK_PIN A3 -#define LED_NUM_LOCK_PIN C6 #define BACKLIGHT_PINS { B5, E5, E4, A7, A1, A2 } #define BACKLIGHT_LEVELS 1*/ diff --git a/keyboards/handwired/oem_iso_fullsize/info.json b/keyboards/handwired/oem_iso_fullsize/info.json index a3736dc768..b1c5c50969 100644 --- a/keyboards/handwired/oem_iso_fullsize/info.json +++ b/keyboards/handwired/oem_iso_fullsize/info.json @@ -8,6 +8,8 @@ "pid": "0x7070", "device_version": "0.0.1" }, + "processor": "at90usb1286", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/oem_iso_fullsize/rules.mk b/keyboards/handwired/oem_iso_fullsize/rules.mk index 29f6363162..ac49f53a20 100644 --- a/keyboards/handwired/oem_iso_fullsize/rules.mk +++ b/keyboards/handwired/oem_iso_fullsize/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/onekey/blackpill_f401/config.h b/keyboards/handwired/onekey/blackpill_f401/config.h index bb6219f1b3..8000ee77d7 100644 --- a/keyboards/handwired/onekey/blackpill_f401/config.h +++ b/keyboards/handwired/onekey/blackpill_f401/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" #define BACKLIGHT_PWM_DRIVER PWMD5 #define BACKLIGHT_PWM_CHANNEL 1 diff --git a/keyboards/handwired/onekey/blackpill_f401_tinyuf2/config.h b/keyboards/handwired/onekey/blackpill_f401_tinyuf2/config.h index bb6219f1b3..8000ee77d7 100755 --- a/keyboards/handwired/onekey/blackpill_f401_tinyuf2/config.h +++ b/keyboards/handwired/onekey/blackpill_f401_tinyuf2/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" #define BACKLIGHT_PWM_DRIVER PWMD5 #define BACKLIGHT_PWM_CHANNEL 1 diff --git a/keyboards/handwired/onekey/blackpill_f401_tinyuf2/info.json b/keyboards/handwired/onekey/blackpill_f401_tinyuf2/info.json index ada49d3849..6787be36af 100644 --- a/keyboards/handwired/onekey/blackpill_f401_tinyuf2/info.json +++ b/keyboards/handwired/onekey/blackpill_f401_tinyuf2/info.json @@ -1,8 +1,7 @@ { "keyboard_name": "Onekey Blackpill STM32F401 TinyUF2", - "processor": "STM32F401", + "development_board": "blackpill_f401", "bootloader": "tinyuf2", - "board": "BLACKPILL_STM32_F401", "matrix_pins": { "cols": ["B0"], "rows": ["A7"] diff --git a/keyboards/handwired/onekey/blackpill_f411/config.h b/keyboards/handwired/onekey/blackpill_f411/config.h index bb6219f1b3..8000ee77d7 100644 --- a/keyboards/handwired/onekey/blackpill_f411/config.h +++ b/keyboards/handwired/onekey/blackpill_f411/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" #define BACKLIGHT_PWM_DRIVER PWMD5 #define BACKLIGHT_PWM_CHANNEL 1 diff --git a/keyboards/handwired/onekey/blackpill_f411_tinyuf2/config.h b/keyboards/handwired/onekey/blackpill_f411_tinyuf2/config.h index bb6219f1b3..8000ee77d7 100755 --- a/keyboards/handwired/onekey/blackpill_f411_tinyuf2/config.h +++ b/keyboards/handwired/onekey/blackpill_f411_tinyuf2/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" #define BACKLIGHT_PWM_DRIVER PWMD5 #define BACKLIGHT_PWM_CHANNEL 1 diff --git a/keyboards/handwired/onekey/blackpill_f411_tinyuf2/info.json b/keyboards/handwired/onekey/blackpill_f411_tinyuf2/info.json index 3acccb7148..25d33a7dde 100644 --- a/keyboards/handwired/onekey/blackpill_f411_tinyuf2/info.json +++ b/keyboards/handwired/onekey/blackpill_f411_tinyuf2/info.json @@ -1,8 +1,7 @@ { "keyboard_name": "Onekey Blackpill STM32F411 TinyUF2", - "processor": "STM32F411", + "development_board": "blackpill_f411", "bootloader": "tinyuf2", - "board": "BLACKPILL_STM32_F411", "matrix_pins": { "cols": ["B0"], "rows": ["A7"] diff --git a/keyboards/handwired/onekey/bluepill/config.h b/keyboards/handwired/onekey/bluepill/config.h index 79fa79595a..7c3512b57b 100644 --- a/keyboards/handwired/onekey/bluepill/config.h +++ b/keyboards/handwired/onekey/bluepill/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" #define BACKLIGHT_PWM_DRIVER PWMD2 #define BACKLIGHT_PWM_CHANNEL 1 diff --git a/keyboards/handwired/onekey/bluepill_f103c6/config.h b/keyboards/handwired/onekey/bluepill_f103c6/config.h index e243d8685f..12f4596e7b 100644 --- a/keyboards/handwired/onekey/bluepill_f103c6/config.h +++ b/keyboards/handwired/onekey/bluepill_f103c6/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" #define BACKLIGHT_PWM_DRIVER PWMD2 #define BACKLIGHT_PWM_CHANNEL 1 diff --git a/keyboards/handwired/misterdeck/config.h b/keyboards/handwired/onekey/bluepill_uf2boot/config.h index 085142d2d5..7c3512b57b 100644 --- a/keyboards/handwired/misterdeck/config.h +++ b/keyboards/handwired/onekey/bluepill_uf2boot/config.h @@ -1,5 +1,4 @@ -/* - * Copyright 2021 Chris Broekema (broekema@gmail.com) +/* Copyright 2019 * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,4 +16,10 @@ #pragma once -#include "config_common.h" + +#define BACKLIGHT_PWM_DRIVER PWMD2 +#define BACKLIGHT_PWM_CHANNEL 1 + +#define ADC_PIN A0 + +#define RGB_CI_PIN A2 diff --git a/keyboards/handwired/wakizashi40/config.h b/keyboards/handwired/onekey/bluepill_uf2boot/halconf.h index e9976616ec..dbc3e82a79 100644 --- a/keyboards/handwired/wakizashi40/config.h +++ b/keyboards/handwired/onekey/bluepill_uf2boot/halconf.h @@ -1,4 +1,4 @@ -/* Copyright 2021 xiao (@xia0) +/* Copyright 2020 QMK * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,6 +14,15 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/handwired/onekey/bluepill/halconf.h -r platforms/chibios/common/configs/halconf.h` + */ + #pragma once -#include "config_common.h" +#define HAL_USE_ADC TRUE + +#define HAL_USE_PWM TRUE + +#include_next <halconf.h> diff --git a/keyboards/handwired/onekey/bluepill_uf2boot/info.json b/keyboards/handwired/onekey/bluepill_uf2boot/info.json new file mode 100644 index 0000000000..1f823ea0d7 --- /dev/null +++ b/keyboards/handwired/onekey/bluepill_uf2boot/info.json @@ -0,0 +1,15 @@ +{ + "keyboard_name": "Onekey Bluepill STM32F103 uf2boot", + "development_board": "bluepill", + "bootloader": "uf2boot", + "matrix_pins": { + "cols": ["B0"], + "rows": ["A7"] + }, + "backlight": { + "pin": "A0" + }, + "rgblight": { + "pin": "A1" + } +} diff --git a/keyboards/handwired/onekey/bluepill_uf2boot/mcuconf.h b/keyboards/handwired/onekey/bluepill_uf2boot/mcuconf.h new file mode 100644 index 0000000000..39834c135b --- /dev/null +++ b/keyboards/handwired/onekey/bluepill_uf2boot/mcuconf.h @@ -0,0 +1,33 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/handwired/onekey/bluepill/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` + */ + +#pragma once + +#include_next <mcuconf.h> + +#undef STM32_ADC_USE_ADC1 +#define STM32_ADC_USE_ADC1 TRUE + +#undef STM32_PWM_USE_TIM2 +#define STM32_PWM_USE_TIM2 TRUE + +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE diff --git a/keyboards/handwired/onekey/bluepill_uf2boot/readme.md b/keyboards/handwired/onekey/bluepill_uf2boot/readme.md new file mode 100644 index 0000000000..7886ed1888 --- /dev/null +++ b/keyboards/handwired/onekey/bluepill_uf2boot/readme.md @@ -0,0 +1,7 @@ +# Bluepill onekey + +To trigger keypress, short together pins *B0* and *A7*. + +This variant requires the uf2-stm32f103 bootloader to be installed. This can be downloaded from the [uf2-stm32f103 releases page](https://github.com/mmoskal/uf2-stm32f103/releases). + +Double-tap reset to enter bootloader mode. Copy the built uf2 file to the device by dragging the file to the new USB disk.
\ No newline at end of file diff --git a/keyboards/handwired/onekey/bluepill_uf2boot/rules.mk b/keyboards/handwired/onekey/bluepill_uf2boot/rules.mk new file mode 100644 index 0000000000..a92b099328 --- /dev/null +++ b/keyboards/handwired/onekey/bluepill_uf2boot/rules.mk @@ -0,0 +1,2 @@ +# Enter lower-power sleep mode when on the ChibiOS idle thread +OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/handwired/onekey/config.h b/keyboards/handwired/onekey/config.h index 9fcd881321..7ef807c5d1 100644 --- a/keyboards/handwired/onekey/config.h +++ b/keyboards/handwired/onekey/config.h @@ -17,9 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -43,7 +40,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/onekey/elite_c/config.h b/keyboards/handwired/onekey/elite_c/config.h index 473cfdfbda..1eb62b4498 100644 --- a/keyboards/handwired/onekey/elite_c/config.h +++ b/keyboards/handwired/onekey/elite_c/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" #define RGB_CI_PIN B1 diff --git a/keyboards/handwired/onekey/evb_wb32f3g71/config.h b/keyboards/handwired/onekey/evb_wb32f3g71/config.h index d1f87b4e3e..11cacfea72 100644 --- a/keyboards/handwired/onekey/evb_wb32f3g71/config.h +++ b/keyboards/handwired/onekey/evb_wb32f3g71/config.h @@ -3,7 +3,6 @@ #pragma once -#include "config_common.h" #define ADC_PIN A0 diff --git a/keyboards/handwired/onekey/evb_wb32fq95/config.h b/keyboards/handwired/onekey/evb_wb32fq95/config.h index d1f87b4e3e..11cacfea72 100644 --- a/keyboards/handwired/onekey/evb_wb32fq95/config.h +++ b/keyboards/handwired/onekey/evb_wb32fq95/config.h @@ -3,7 +3,6 @@ #pragma once -#include "config_common.h" #define ADC_PIN A0 diff --git a/keyboards/handwired/onekey/kb2040/config.h b/keyboards/handwired/onekey/kb2040/config.h index c6c6dbe2cf..e0bf180056 100644 --- a/keyboards/handwired/onekey/kb2040/config.h +++ b/keyboards/handwired/onekey/kb2040/config.h @@ -3,7 +3,6 @@ #pragma once -#include "config_common.h" #define DEBUG_MATRIX_SCAN_RATE @@ -16,7 +15,7 @@ // settings for the oled keyboard demo with Adafruit 0.91" OLED display on the Stemma QT port #define OLED_DISPLAY_128X32 -#define I2C_DRIVER I2CD1 +#define I2C_DRIVER I2CD0 #define I2C1_SDA_PIN GP12 #define I2C1_SCL_PIN GP13 diff --git a/keyboards/handwired/onekey/keymaps/backlight/keymap.c b/keyboards/handwired/onekey/keymaps/backlight/keymap.c index 1fbbc632da..746e4619de 100644 --- a/keyboards/handwired/onekey/keymaps/backlight/keymap.c +++ b/keyboards/handwired/onekey/keymaps/backlight/keymap.c @@ -5,11 +5,11 @@ enum { TD_BL = 0 }; -void dance_cln_finished(qk_tap_dance_state_t *state, void *user_data) { +void dance_cln_finished(tap_dance_state_t *state, void *user_data) { // noop } -void dance_cln_reset(qk_tap_dance_state_t *state, void *user_data) { +void dance_cln_reset(tap_dance_state_t *state, void *user_data) { switch (state->count) { case 1: // single tap - step through backlight @@ -30,7 +30,7 @@ void dance_cln_reset(qk_tap_dance_state_t *state, void *user_data) { } } -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { [TD_BL] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, dance_cln_finished, dance_cln_reset) }; diff --git a/keyboards/handwired/onekey/keymaps/digitizer/keymap.c b/keyboards/handwired/onekey/keymaps/digitizer/keymap.c index dcc0adc59b..49fe3d66c8 100644 --- a/keyboards/handwired/onekey/keymaps/digitizer/keymap.c +++ b/keyboards/handwired/onekey/keymaps/digitizer/keymap.c @@ -32,7 +32,7 @@ void keyboard_post_init_user(void) { digitizer_in_range_on(); } -void matrix_scan_user() { +void matrix_scan_user(void) { if (timer_elapsed32(timer) < 200) { return; } diff --git a/keyboards/handwired/onekey/keymaps/joystick/keymap.c b/keyboards/handwired/onekey/keymaps/joystick/keymap.c index 6463900b7b..3bcdf2c58e 100644 --- a/keyboards/handwired/onekey/keymaps/joystick/keymap.c +++ b/keyboards/handwired/onekey/keymaps/joystick/keymap.c @@ -8,7 +8,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { LAYOUT_ortho_1x1(JS_0) }; -void matrix_scan_user() { +void matrix_scan_user(void) { int16_t val = (((uint32_t)timer_read() % 5000 - 2500) * 255) / 5000; joystick_set_axis(1, val); } diff --git a/keyboards/handwired/onekey/keymaps/lvgl/config.h b/keyboards/handwired/onekey/keymaps/lvgl/config.h new file mode 100644 index 0000000000..38bb5d0cf3 --- /dev/null +++ b/keyboards/handwired/onekey/keymaps/lvgl/config.h @@ -0,0 +1,15 @@ +// Copyright 2022 Jose Pablo Ramirez (@jpe230) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +/* SPI pins */ +#define SPI_DRIVER SPID0 +#define SPI_SCK_PIN GP18 +#define SPI_MOSI_PIN GP19 +#define SPI_MISO_PIN GP20 + +/* LCD Configuration */ +#define LCD_RST_PIN GP0 +#define LCD_DC_PIN GP1 +#define LCD_CS_PIN GP2 diff --git a/keyboards/handwired/onekey/keymaps/lvgl/halconf.h b/keyboards/handwired/onekey/keymaps/lvgl/halconf.h new file mode 100644 index 0000000000..27646bb3f5 --- /dev/null +++ b/keyboards/handwired/onekey/keymaps/lvgl/halconf.h @@ -0,0 +1,12 @@ +// Copyright 2022 Jose Pablo Ramirez (@jpe230) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include_next <halconf.h> + +#undef HAL_USE_SPI +#define HAL_USE_SPI TRUE + +#undef SPI_USE_WAIT +#define SPI_USE_WAIT TRUE diff --git a/keyboards/handwired/onekey/keymaps/lvgl/keymap.c b/keyboards/handwired/onekey/keymaps/lvgl/keymap.c new file mode 100644 index 0000000000..1d42c3ae82 --- /dev/null +++ b/keyboards/handwired/onekey/keymaps/lvgl/keymap.c @@ -0,0 +1,50 @@ +// Copyright 2022 Jose Pablo Ramirez (@jpe230) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H +#include "qp.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT_ortho_1x1(JS_0) +}; + +painter_device_t lcd; + +void lv_example_arc_2(void); + +void keyboard_post_init_user(void) { + lcd = qp_gc9a01_make_spi_device(240, 240, LCD_CS_PIN, LCD_DC_PIN, LCD_RST_PIN, 4, 0); + qp_init(lcd, QP_ROTATION_0); + qp_rect(lcd, 0, 0, 239, 319, 0, 255, 255, true); + + if (qp_lvgl_attach(lcd)) { + lv_example_arc_2(); + } +} + +static void set_angle(void* obj, int32_t v) { + lv_arc_set_value(obj, v); +} + +/** + * Create an arc which acts as a loader. + */ +void lv_example_arc_2(void) { + /*Create an Arc*/ + lv_obj_t* arc = lv_arc_create(lv_scr_act()); + lv_arc_set_rotation(arc, 270); + lv_arc_set_bg_angles(arc, 0, 360); + lv_obj_remove_style(arc, NULL, LV_PART_KNOB); /*Be sure the knob is not displayed*/ + lv_obj_clear_flag(arc, LV_OBJ_FLAG_CLICKABLE); /*To not allow adjusting by click*/ + lv_obj_center(arc); + + static lv_anim_t a; + lv_anim_init(&a); + lv_anim_set_var(&a, arc); + lv_anim_set_exec_cb(&a, set_angle); + lv_anim_set_time(&a, 1000); + lv_anim_set_repeat_count(&a, LV_ANIM_REPEAT_INFINITE); /*Just for the demo*/ + lv_anim_set_repeat_delay(&a, 500); + lv_anim_set_values(&a, 0, 100); + lv_anim_start(&a); +} diff --git a/keyboards/handwired/onekey/keymaps/lvgl/mcuconf.h b/keyboards/handwired/onekey/keymaps/lvgl/mcuconf.h new file mode 100644 index 0000000000..bff74867ff --- /dev/null +++ b/keyboards/handwired/onekey/keymaps/lvgl/mcuconf.h @@ -0,0 +1,9 @@ +// Copyright 2022 Jose Pablo Ramirez (@jpe230) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include_next <mcuconf.h> + +#undef RP_SPI_USE_SPI0 +#define RP_SPI_USE_SPI0 TRUE diff --git a/keyboards/handwired/onekey/keymaps/lvgl/rules.mk b/keyboards/handwired/onekey/keymaps/lvgl/rules.mk new file mode 100644 index 0000000000..872d12ad6f --- /dev/null +++ b/keyboards/handwired/onekey/keymaps/lvgl/rules.mk @@ -0,0 +1,3 @@ +QUANTUM_PAINTER_ENABLE = yes +QUANTUM_PAINTER_LVGL_INTEGRATION = yes +QUANTUM_PAINTER_DRIVERS = gc9a01_spi diff --git a/keyboards/handwired/onekey/keymaps/oled/keymap.c b/keyboards/handwired/onekey/keymaps/oled/keymap.c index 244dc4facb..120ab80fa5 100644 --- a/keyboards/handwired/onekey/keymaps/oled/keymap.c +++ b/keyboards/handwired/onekey/keymaps/oled/keymap.c @@ -63,7 +63,7 @@ static void stop_scrolling(void) { } } -static void dance_oled_finished(qk_tap_dance_state_t *state, void *user_data) { +static void dance_oled_finished(tap_dance_state_t *state, void *user_data) { switch (state->count) { case 1: if (state->pressed) { @@ -155,7 +155,7 @@ static void dance_oled_finished(qk_tap_dance_state_t *state, void *user_data) { } } -qk_tap_dance_action_t tap_dance_actions[] = {[TD_OLED] = ACTION_TAP_DANCE_FN(dance_oled_finished)}; +tap_dance_action_t tap_dance_actions[] = {[TD_OLED] = ACTION_TAP_DANCE_FN(dance_oled_finished)}; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {LAYOUT_ortho_1x1(TD(TD_OLED))}; diff --git a/keyboards/handwired/onekey/nucleo_f446re/config.h b/keyboards/handwired/onekey/nucleo_f446re/config.h index 612cbf0eab..52fe25dc8c 100644 --- a/keyboards/handwired/onekey/nucleo_f446re/config.h +++ b/keyboards/handwired/onekey/nucleo_f446re/config.h @@ -2,7 +2,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later #pragma once -#include "config_common.h" #define BACKLIGHT_PWM_DRIVER PWMD4 #define BACKLIGHT_PWM_CHANNEL 3 diff --git a/keyboards/handwired/onekey/nucleo_l432kc/config.h b/keyboards/handwired/onekey/nucleo_l432kc/config.h index 24b136fe2a..fcf2c71b47 100644 --- a/keyboards/handwired/onekey/nucleo_l432kc/config.h +++ b/keyboards/handwired/onekey/nucleo_l432kc/config.h @@ -2,7 +2,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later #pragma once -#include "config_common.h" #define BACKLIGHT_PWM_DRIVER PWMD4 #define BACKLIGHT_PWM_CHANNEL 3 diff --git a/keyboards/handwired/onekey/promicro/config.h b/keyboards/handwired/onekey/promicro/config.h index 473cfdfbda..1eb62b4498 100644 --- a/keyboards/handwired/onekey/promicro/config.h +++ b/keyboards/handwired/onekey/promicro/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" #define RGB_CI_PIN B1 diff --git a/keyboards/handwired/onekey/proton_c/config.h b/keyboards/handwired/onekey/proton_c/config.h index 776c422398..1f1c528400 100644 --- a/keyboards/handwired/onekey/proton_c/config.h +++ b/keyboards/handwired/onekey/proton_c/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" #define BACKLIGHT_PWM_DRIVER PWMD4 #define BACKLIGHT_PWM_CHANNEL 3 diff --git a/keyboards/handwired/onekey/rp2040/config.h b/keyboards/handwired/onekey/rp2040/config.h index d3e7b5c076..5cbfb8dbff 100644 --- a/keyboards/handwired/onekey/rp2040/config.h +++ b/keyboards/handwired/onekey/rp2040/config.h @@ -3,7 +3,6 @@ #pragma once -#include "config_common.h" #define DEBUG_MATRIX_SCAN_RATE @@ -20,3 +19,5 @@ #define AUDIO_PIN GP16 #define AUDIO_PWM_DRIVER PWMD0 #define AUDIO_PWM_CHANNEL RP2040_PWM_CHANNEL_A + +#define ADC_PIN GP26 diff --git a/keyboards/handwired/onekey/rp2040/halconf.h b/keyboards/handwired/onekey/rp2040/halconf.h index 5890122e5e..ec56be2263 100644 --- a/keyboards/handwired/onekey/rp2040/halconf.h +++ b/keyboards/handwired/onekey/rp2040/halconf.h @@ -5,5 +5,6 @@ #define HAL_USE_I2C TRUE #define HAL_USE_PWM TRUE +#define HAL_USE_ADC TRUE #include_next <halconf.h> diff --git a/keyboards/handwired/onekey/sipeed_longan_nano/config.h b/keyboards/handwired/onekey/sipeed_longan_nano/config.h index 74ae76f594..71ac29e882 100644 --- a/keyboards/handwired/onekey/sipeed_longan_nano/config.h +++ b/keyboards/handwired/onekey/sipeed_longan_nano/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" #define BACKLIGHT_PWM_DRIVER PWMD5 /* GD32 numbering scheme starts from 0, TIMER4 on GD32 boards is TIMER5 on STM32 boards. */ #define BACKLIGHT_PWM_CHANNEL 2 /* GD32 numbering scheme starts from 0, Channel 1 on GD32 boards is Channel 2 on STM32 boards. */ diff --git a/keyboards/handwired/onekey/stm32f0_disco/config.h b/keyboards/handwired/onekey/stm32f0_disco/config.h index 7d23fb9307..b4665911d4 100644 --- a/keyboards/handwired/onekey/stm32f0_disco/config.h +++ b/keyboards/handwired/onekey/stm32f0_disco/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" #define BACKLIGHT_PWM_DRIVER PWMD3 #define BACKLIGHT_PWM_CHANNEL 3 diff --git a/keyboards/handwired/onekey/teensy_2/config.h b/keyboards/handwired/onekey/teensy_2/config.h index a2a2a64835..e70df80fc8 100644 --- a/keyboards/handwired/onekey/teensy_2/config.h +++ b/keyboards/handwired/onekey/teensy_2/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" #define ADC_PIN F6 diff --git a/keyboards/handwired/onekey/teensy_2pp/config.h b/keyboards/handwired/onekey/teensy_2pp/config.h index a2a2a64835..e70df80fc8 100644 --- a/keyboards/handwired/onekey/teensy_2pp/config.h +++ b/keyboards/handwired/onekey/teensy_2pp/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" #define ADC_PIN F6 diff --git a/keyboards/handwired/onekey/teensy_32/config.h b/keyboards/handwired/onekey/teensy_32/config.h index e01cfa3c8c..26c5061d44 100644 --- a/keyboards/handwired/onekey/teensy_32/config.h +++ b/keyboards/handwired/onekey/teensy_32/config.h @@ -17,7 +17,6 @@ #pragma once // TODO: including this causes "error: expected identifier before '(' token" errors -//#include "config_common.h" // i2c_master defines #define I2C1_SCL_PIN B0 // A2 on pinout = B0 diff --git a/keyboards/handwired/onekey/teensy_35/config.h b/keyboards/handwired/onekey/teensy_35/config.h index 0f15fc87d8..bd9e3f5be7 100644 --- a/keyboards/handwired/onekey/teensy_35/config.h +++ b/keyboards/handwired/onekey/teensy_35/config.h @@ -17,7 +17,6 @@ #pragma once // TODO: including this causes "error: expected identifier before '(' token" errors -//#include "config_common.h" // i2c_master defines #define I2C1_SCL_PIN B0 // 16/A2 on pinout diff --git a/keyboards/handwired/onekey/teensy_lc/config.h b/keyboards/handwired/onekey/teensy_lc/config.h index e01cfa3c8c..26c5061d44 100644 --- a/keyboards/handwired/onekey/teensy_lc/config.h +++ b/keyboards/handwired/onekey/teensy_lc/config.h @@ -17,7 +17,6 @@ #pragma once // TODO: including this causes "error: expected identifier before '(' token" errors -//#include "config_common.h" // i2c_master defines #define I2C1_SCL_PIN B0 // A2 on pinout = B0 diff --git a/keyboards/handwired/ortho5x13/config.h b/keyboards/handwired/ortho5x13/config.h index f88d2b7002..55782eaff1 100644 --- a/keyboards/handwired/ortho5x13/config.h +++ b/keyboards/handwired/ortho5x13/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 13 /* * Keyboard Matrix Assignments @@ -39,45 +34,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/handwired/ortho5x13/info.json b/keyboards/handwired/ortho5x13/info.json index 0fe0530e33..6057d1e092 100644 --- a/keyboards/handwired/ortho5x13/info.json +++ b/keyboards/handwired/ortho5x13/info.json @@ -8,6 +8,8 @@ "pid": "0x050D", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/ortho5x13/keymaps/default/keymap.c b/keyboards/handwired/ortho5x13/keymaps/default/keymap.c index f043bd1be2..ef975a215d 100644 --- a/keyboards/handwired/ortho5x13/keymaps/default/keymap.c +++ b/keyboards/handwired/ortho5x13/keymaps/default/keymap.c @@ -256,13 +256,13 @@ void matrix_init_user(void) { #ifdef AUDIO_ENABLE -void startup_user() +void startup_user(void) { _delay_ms(20); // gets rid of tick PLAY_SONG(tone_startup); } -void shutdown_user() +void shutdown_user(void) { PLAY_SONG(tone_goodbye); _delay_ms(150); diff --git a/keyboards/handwired/ortho5x13/rules.mk b/keyboards/handwired/ortho5x13/rules.mk index 9b2c210d42..b6e2a5f9a4 100644 --- a/keyboards/handwired/ortho5x13/rules.mk +++ b/keyboards/handwired/ortho5x13/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/ortho5x14/config.h b/keyboards/handwired/ortho5x14/config.h index e74a645870..92f72b4fc7 100644 --- a/keyboards/handwired/ortho5x14/config.h +++ b/keyboards/handwired/ortho5x14/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 /* * Keyboard Matrix Assignments @@ -39,17 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -60,28 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define PERMISSIVE_HOLD /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/handwired/ortho5x14/info.json b/keyboards/handwired/ortho5x14/info.json index 3702a2ff38..8e657b7675 100644 --- a/keyboards/handwired/ortho5x14/info.json +++ b/keyboards/handwired/ortho5x14/info.json @@ -8,6 +8,8 @@ "pid": "0x050D", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/ortho5x14/keymaps/2u/keymap.c b/keyboards/handwired/ortho5x14/keymaps/2u/keymap.c index cfd176a9d5..568427e52c 100644 --- a/keyboards/handwired/ortho5x14/keymaps/2u/keymap.c +++ b/keyboards/handwired/ortho5x14/keymaps/2u/keymap.c @@ -108,11 +108,11 @@ enum { // // Alt held down, then use as normal. // // Alt tapped, then hold Alt, -int cur_dance (qk_tap_dance_state_t *state); -void alt_finished (qk_tap_dance_state_t *state, void *user_data); -void alt_reset (qk_tap_dance_state_t *state, void *user_data); +int cur_dance (tap_dance_state_t *state); +void alt_finished (tap_dance_state_t *state, void *user_data); +void alt_reset (tap_dance_state_t *state, void *user_data); -int cur_dance (qk_tap_dance_state_t *state) { +int cur_dance (tap_dance_state_t *state) { if (state->count == 1) { if (state->pressed) return SINGLE_HOLD; else return SINGLE_TAP; @@ -133,7 +133,7 @@ static tap alttap_state = { .state = 0 }; -void alt_finished (qk_tap_dance_state_t *state, void *user_data) { +void alt_finished (tap_dance_state_t *state, void *user_data) { alttap_state.state = cur_dance(state); switch (alttap_state.state) { case SINGLE_TAP: set_oneshot_layer(_ALT, ONESHOT_START); clear_oneshot_layer_state(ONESHOT_PRESSED); break; @@ -146,7 +146,7 @@ void alt_finished (qk_tap_dance_state_t *state, void *user_data) { } } -void alt_reset (qk_tap_dance_state_t *state, void *user_data) { +void alt_reset (tap_dance_state_t *state, void *user_data) { switch (alttap_state.state) { case SINGLE_TAP: break; case SINGLE_HOLD: unregister_code(KC_LALT); break; @@ -157,15 +157,15 @@ void alt_reset (qk_tap_dance_state_t *state, void *user_data) { } // Ctrl tapped, then hold Ctrl, -void ctl_finished (qk_tap_dance_state_t *state, void *user_data); -void ctl_reset (qk_tap_dance_state_t *state, void *user_data); +void ctl_finished (tap_dance_state_t *state, void *user_data); +void ctl_reset (tap_dance_state_t *state, void *user_data); static tap ctltap_state = { .is_press_action = true, .state = 0 }; -void ctl_finished (qk_tap_dance_state_t *state, void *user_data) { +void ctl_finished (tap_dance_state_t *state, void *user_data) { ctltap_state.state = cur_dance(state); switch (ctltap_state.state) { case SINGLE_TAP: set_oneshot_mods(MOD_BIT(KC_LCTL)); break; @@ -176,7 +176,7 @@ void ctl_finished (qk_tap_dance_state_t *state, void *user_data) { } } -void ctl_reset (qk_tap_dance_state_t *state, void *user_data) { +void ctl_reset (tap_dance_state_t *state, void *user_data) { switch (ctltap_state.state) { case SINGLE_TAP: break; case SINGLE_HOLD: unregister_code(KC_LCTL); break; @@ -189,15 +189,15 @@ void ctl_reset (qk_tap_dance_state_t *state, void *user_data) { // Layer Down tap dance -void layerDown_finished (qk_tap_dance_state_t *state, void *user_data); -void layerDown_reset (qk_tap_dance_state_t *state, void *user_data); +void layerDown_finished (tap_dance_state_t *state, void *user_data); +void layerDown_reset (tap_dance_state_t *state, void *user_data); static tap layerdn_tap_state = { .is_press_action = true, .state = 0 }; -void layerDown_finished (qk_tap_dance_state_t *state, void *user_data) { +void layerDown_finished (tap_dance_state_t *state, void *user_data) { layerdn_tap_state.state = cur_dance(state); switch (layerdn_tap_state.state) { case SINGLE_TAP: break; @@ -208,7 +208,7 @@ void layerDown_finished (qk_tap_dance_state_t *state, void *user_data) { } } -void layerDown_reset (qk_tap_dance_state_t *state, void *user_data) { +void layerDown_reset (tap_dance_state_t *state, void *user_data) { switch (layerdn_tap_state.state) { case SINGLE_TAP: break; case SINGLE_HOLD: layer_off(_LOWER); break; @@ -219,15 +219,15 @@ void layerDown_reset (qk_tap_dance_state_t *state, void *user_data) { } // Layer Up tap dance -void layerUp_finished (qk_tap_dance_state_t *state, void *user_data); -void layerUp_reset (qk_tap_dance_state_t *state, void *user_data); +void layerUp_finished (tap_dance_state_t *state, void *user_data); +void layerUp_reset (tap_dance_state_t *state, void *user_data); static tap layerup_tap_state = { .is_press_action = true, .state = 0 }; -void layerUp_finished (qk_tap_dance_state_t *state, void *user_data) { +void layerUp_finished (tap_dance_state_t *state, void *user_data) { layerup_tap_state.state = cur_dance(state); switch (layerup_tap_state.state) { case SINGLE_TAP: break; @@ -238,7 +238,7 @@ void layerUp_finished (qk_tap_dance_state_t *state, void *user_data) { } } -void layerUp_reset (qk_tap_dance_state_t *state, void *user_data) { +void layerUp_reset (tap_dance_state_t *state, void *user_data) { switch (layerup_tap_state.state) { case SINGLE_TAP: break; case SINGLE_HOLD: layer_off(_RAISE); break; @@ -255,16 +255,16 @@ void layerUp_reset (qk_tap_dance_state_t *state, void *user_data) { // Shift tapped, then Capitlize next keystroke only. // Shift double-tapped, then CAPSLOCK // Shift double-tapped again, CAPS UNLOCKED -// void dance_onshot_lsft(qk_tap_dance_state_t *state, void *user_data) { -void lshift_finished (qk_tap_dance_state_t *state, void *user_data); -void lshift_reset (qk_tap_dance_state_t *state, void *user_data); +// void dance_onshot_lsft(tap_dance_state_t *state, void *user_data) { +void lshift_finished (tap_dance_state_t *state, void *user_data); +void lshift_reset (tap_dance_state_t *state, void *user_data); static tap lshifttap_state = { .is_press_action = true, .state = 0 }; -void lshift_finished (qk_tap_dance_state_t *state, void *user_data) { +void lshift_finished (tap_dance_state_t *state, void *user_data) { lshifttap_state.state = cur_dance(state); switch (lshifttap_state.state) { case SINGLE_TAP: set_oneshot_mods(MOD_BIT(KC_LSFT)); break; @@ -274,7 +274,7 @@ void lshift_finished (qk_tap_dance_state_t *state, void *user_data) { } } -void lshift_reset (qk_tap_dance_state_t *state, void *user_data) { +void lshift_reset (tap_dance_state_t *state, void *user_data) { switch (lshifttap_state.state) { case SINGLE_TAP: break; case SINGLE_HOLD: unregister_code(KC_LSFT); break; @@ -285,15 +285,15 @@ void lshift_reset (qk_tap_dance_state_t *state, void *user_data) { } //TD_LSPACE -void lspace_finished (qk_tap_dance_state_t *state, void *user_data); -void lspace_reset (qk_tap_dance_state_t *state, void *user_data); +void lspace_finished (tap_dance_state_t *state, void *user_data); +void lspace_reset (tap_dance_state_t *state, void *user_data); static tap lspacetap_state = { .is_press_action = true, .state = 0 }; -void lspace_finished (qk_tap_dance_state_t *state, void *user_data) { +void lspace_finished (tap_dance_state_t *state, void *user_data) { lspacetap_state.state = cur_dance(state); switch (lspacetap_state.state) { case SINGLE_TAP: tap_code (KC_SPACE); break; @@ -303,7 +303,7 @@ void lspace_finished (qk_tap_dance_state_t *state, void *user_data) { } } -void lspace_reset (qk_tap_dance_state_t *state, void *user_data) { +void lspace_reset (tap_dance_state_t *state, void *user_data) { switch (lspacetap_state.state) { case SINGLE_TAP: break; case SINGLE_HOLD: layer_off(_LOWER); break; @@ -318,7 +318,7 @@ void lspace_reset (qk_tap_dance_state_t *state, void *user_data) { //Tap Dance Definitions -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { [TD_DEL_BSPC] = ACTION_TAP_DANCE_DOUBLE(KC_DEL, KC_BSPC), [TD_ESC_GRAVE] = ACTION_TAP_DANCE_DOUBLE(KC_ESC, KC_GRAVE), [TD_TAB_TILDE] = ACTION_TAP_DANCE_DOUBLE(KC_TAB, KC_TILDE), diff --git a/keyboards/handwired/ortho5x14/keymaps/default/keymap.c b/keyboards/handwired/ortho5x14/keymaps/default/keymap.c index 25ae840b79..d3fd18ec4e 100644 --- a/keyboards/handwired/ortho5x14/keymaps/default/keymap.c +++ b/keyboards/handwired/ortho5x14/keymaps/default/keymap.c @@ -63,7 +63,7 @@ enum { // Shift tapped, then Capitlize next keystroke only. // Shift double-tapped, then CAPSLOCK // Shift double-tapped again, CAPS UNLOCKED -void dance_onshot_lsft(qk_tap_dance_state_t *state, void *user_data) { +void dance_onshot_lsft(tap_dance_state_t *state, void *user_data) { switch (state->count) { case 1: // => set_oneshot_mods (MOD_LSFT); @@ -76,7 +76,7 @@ void dance_onshot_lsft(qk_tap_dance_state_t *state, void *user_data) { } //Tap Dance Definitions -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { [TD_DEL_BSPC] = ACTION_TAP_DANCE_DOUBLE(KC_DEL, KC_BSPC), [TD_ESC_GRAVE] = ACTION_TAP_DANCE_DOUBLE(KC_ESC, KC_GRAVE), [TD_TAB_TILDE] = ACTION_TAP_DANCE_DOUBLE(KC_TAB, KC_TILDE), diff --git a/keyboards/handwired/ortho5x14/keymaps/split1/keymap.c b/keyboards/handwired/ortho5x14/keymaps/split1/keymap.c index a5bb69ef24..733e3f3d4b 100644 --- a/keyboards/handwired/ortho5x14/keymaps/split1/keymap.c +++ b/keyboards/handwired/ortho5x14/keymaps/split1/keymap.c @@ -104,11 +104,11 @@ enum { // // Alt held down, then use as normal. // // Alt tapped, then hold Alt, -int cur_dance (qk_tap_dance_state_t *state); -void alt_finished (qk_tap_dance_state_t *state, void *user_data); -void alt_reset (qk_tap_dance_state_t *state, void *user_data); +int cur_dance (tap_dance_state_t *state); +void alt_finished (tap_dance_state_t *state, void *user_data); +void alt_reset (tap_dance_state_t *state, void *user_data); -int cur_dance (qk_tap_dance_state_t *state) { +int cur_dance (tap_dance_state_t *state) { if (state->count == 1) { if (state->pressed) return SINGLE_HOLD; else return SINGLE_TAP; @@ -129,7 +129,7 @@ static tap alttap_state = { .state = 0 }; -void alt_finished (qk_tap_dance_state_t *state, void *user_data) { +void alt_finished (tap_dance_state_t *state, void *user_data) { alttap_state.state = cur_dance(state); switch (alttap_state.state) { case SINGLE_TAP: set_oneshot_layer(_ALT, ONESHOT_START); clear_oneshot_layer_state(ONESHOT_PRESSED); break; @@ -142,7 +142,7 @@ void alt_finished (qk_tap_dance_state_t *state, void *user_data) { } } -void alt_reset (qk_tap_dance_state_t *state, void *user_data) { +void alt_reset (tap_dance_state_t *state, void *user_data) { switch (alttap_state.state) { case SINGLE_TAP: break; case SINGLE_HOLD: unregister_code(KC_LALT); break; @@ -153,15 +153,15 @@ void alt_reset (qk_tap_dance_state_t *state, void *user_data) { } // Ctrl tapped, then hold Ctrl, -void ctl_finished (qk_tap_dance_state_t *state, void *user_data); -void ctl_reset (qk_tap_dance_state_t *state, void *user_data); +void ctl_finished (tap_dance_state_t *state, void *user_data); +void ctl_reset (tap_dance_state_t *state, void *user_data); static tap ctltap_state = { .is_press_action = true, .state = 0 }; -void ctl_finished (qk_tap_dance_state_t *state, void *user_data) { +void ctl_finished (tap_dance_state_t *state, void *user_data) { ctltap_state.state = cur_dance(state); switch (ctltap_state.state) { case SINGLE_TAP: set_oneshot_mods(MOD_BIT(KC_LCTL)); break; @@ -174,7 +174,7 @@ void ctl_finished (qk_tap_dance_state_t *state, void *user_data) { } } -void ctl_reset (qk_tap_dance_state_t *state, void *user_data) { +void ctl_reset (tap_dance_state_t *state, void *user_data) { switch (ctltap_state.state) { case SINGLE_TAP: break; case SINGLE_HOLD: unregister_code(KC_LCTL); break; @@ -186,15 +186,15 @@ void ctl_reset (qk_tap_dance_state_t *state, void *user_data) { // Layer Down tap dance -void layerDown_finished (qk_tap_dance_state_t *state, void *user_data); -void layerDown_reset (qk_tap_dance_state_t *state, void *user_data); +void layerDown_finished (tap_dance_state_t *state, void *user_data); +void layerDown_reset (tap_dance_state_t *state, void *user_data); static tap layerdn_tap_state = { .is_press_action = true, .state = 0 }; -void layerDown_finished (qk_tap_dance_state_t *state, void *user_data) { +void layerDown_finished (tap_dance_state_t *state, void *user_data) { layerdn_tap_state.state = cur_dance(state); switch (layerdn_tap_state.state) { case SINGLE_TAP: break; @@ -204,7 +204,7 @@ void layerDown_finished (qk_tap_dance_state_t *state, void *user_data) { } } -void layerDown_reset (qk_tap_dance_state_t *state, void *user_data) { +void layerDown_reset (tap_dance_state_t *state, void *user_data) { switch (layerdn_tap_state.state) { case SINGLE_TAP: break; case SINGLE_HOLD: layer_off(_LOWER); break; @@ -222,16 +222,16 @@ void layerDown_reset (qk_tap_dance_state_t *state, void *user_data) { // Shift tapped, then Capitlize next keystroke only. // Shift double-tapped, then CAPSLOCK // Shift double-tapped again, CAPS UNLOCKED -// void dance_onshot_lsft(qk_tap_dance_state_t *state, void *user_data) { -void lshift_finished (qk_tap_dance_state_t *state, void *user_data); -void lshift_reset (qk_tap_dance_state_t *state, void *user_data); +// void dance_onshot_lsft(tap_dance_state_t *state, void *user_data) { +void lshift_finished (tap_dance_state_t *state, void *user_data); +void lshift_reset (tap_dance_state_t *state, void *user_data); static tap lshifttap_state = { .is_press_action = true, .state = 0 }; -void lshift_finished (qk_tap_dance_state_t *state, void *user_data) { +void lshift_finished (tap_dance_state_t *state, void *user_data) { lshifttap_state.state = cur_dance(state); switch (lshifttap_state.state) { case SINGLE_TAP: set_oneshot_mods(MOD_BIT(KC_LSFT)); break; @@ -241,7 +241,7 @@ void lshift_finished (qk_tap_dance_state_t *state, void *user_data) { } } -void lshift_reset (qk_tap_dance_state_t *state, void *user_data) { +void lshift_reset (tap_dance_state_t *state, void *user_data) { switch (lshifttap_state.state) { case SINGLE_TAP: break; case SINGLE_HOLD: unregister_code(KC_LSFT); break; @@ -254,7 +254,7 @@ void lshift_reset (qk_tap_dance_state_t *state, void *user_data) { //Tap Dance Definitions -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { [TD_DEL_BSPC] = ACTION_TAP_DANCE_DOUBLE(KC_DEL, KC_BSPC), [TD_ESC_GRAVE] = ACTION_TAP_DANCE_DOUBLE(KC_ESC, KC_GRAVE), [TD_TAB_TILDE] = ACTION_TAP_DANCE_DOUBLE(KC_TAB, KC_TILDE), diff --git a/keyboards/handwired/ortho5x14/rules.mk b/keyboards/handwired/ortho5x14/rules.mk index aae71d4602..c8758ba64c 100644 --- a/keyboards/handwired/ortho5x14/rules.mk +++ b/keyboards/handwired/ortho5x14/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/ortho_brass/config.h b/keyboards/handwired/ortho_brass/config.h index 8b546c04c0..3f8e24089b 100644 --- a/keyboards/handwired/ortho_brass/config.h +++ b/keyboards/handwired/ortho_brass/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 /* Handwired pin-out */ #define MATRIX_ROW_PINS \ @@ -30,6 +25,3 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 diff --git a/keyboards/handwired/ortho_brass/info.json b/keyboards/handwired/ortho_brass/info.json index ab79b9df72..c931dc327f 100644 --- a/keyboards/handwired/ortho_brass/info.json +++ b/keyboards/handwired/ortho_brass/info.json @@ -8,6 +8,9 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "qmk-dfu", + "community_layouts": ["ortho_4x12"], "layouts": { "LAYOUT_ortho_4x12": { "layout": [ diff --git a/keyboards/handwired/ortho_brass/rules.mk b/keyboards/handwired/ortho_brass/rules.mk index 4e3b0d925a..36acc6fd92 100644 --- a/keyboards/handwired/ortho_brass/rules.mk +++ b/keyboards/handwired/ortho_brass/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = qmk-dfu - # Build Options BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys @@ -14,6 +8,4 @@ NKRO_ENABLE = yes # Enable N-key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable RGB underlight. -LAYOUTS = ortho_4x12 - RGBLIGHT_SUPPORTED = no diff --git a/keyboards/handwired/owlet60/config.h b/keyboards/handwired/owlet60/config.h index be338d75ab..9eff47d07e 100644 --- a/keyboards/handwired/owlet60/config.h +++ b/keyboards/handwired/owlet60/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 9 @@ -41,15 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -//#define BACKLIGHT_PIN D3 -//#define BACKLIGHT_BREATHING -//#define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN D0 #ifdef RGB_DI_PIN #define RGBLED_NUM 8 @@ -68,51 +58,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 9 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -128,7 +75,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/owlet60/info.json b/keyboards/handwired/owlet60/info.json index df230a9b01..6b84c37e9b 100644 --- a/keyboards/handwired/owlet60/info.json +++ b/keyboards/handwired/owlet60/info.json @@ -8,6 +8,10 @@ "pid": "0xDA19", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", + "debounce": 9, + "community_layouts": ["alice", "alice_split_bs"], "layouts": { "LAYOUT_owlet60_full_bsp": { "layout": [{"label":"F1", "x":0.5, "y":0}, {"label":"~", "x":1.75, "y":0}, {"label":"!", "x":2.75, "y":0}, {"label":"@", "x":3.75, "y":0}, {"label":"#", "x":4.75, "y":0}, {"label":"$", "x":5.75, "y":0}, {"label":"%", "x":6.75, "y":0}, {"label":"^", "x":7.75, "y":0}, {"label":"&", "x":9.25, "y":0}, {"label":"*", "x":10.25, "y":0}, {"label":"(", "x":11.25, "y":0}, {"label":")", "x":12.25, "y":0}, {"label":"_", "x":13.25, "y":0}, {"label":"+", "x":14.25, "y":0}, {"label":"Backspace", "x":15.25, "y":0, "w":2}, {"label":"PgUp", "x":17.25, "y":0}, {"label":"F2", "x":0.25, "y":1}, {"label":"Tab", "x":1.5, "y":1, "w":1.5}, {"label":"Q", "x":3, "y":1}, {"label":"W", "x":4, "y":1}, {"label":"E", "x":5, "y":1}, {"label":"R", "x":6, "y":1}, {"label":"T", "x":7, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15, "y":1}, {"label":"|", "x":16, "y":1, "w":1.5}, {"label":"PgDn", "x":17.5, "y":1}, {"label":"F3", "x":0, "y":2}, {"label":"Caps Lock", "x":1.25, "y":2, "w":1.75}, {"label":"A", "x":3, "y":2}, {"label":"S", "x":4, "y":2}, {"label":"D", "x":5, "y":2}, {"label":"F", "x":6, "y":2}, {"label":"G", "x":7, "y":2}, {"label":"H", "x":9.5, "y":2}, {"label":"J", "x":10.5, "y":2}, {"label":"K", "x":11.5, "y":2}, {"label":"L", "x":12.5, "y":2}, {"label":":", "x":13.5, "y":2}, {"label":"\"", "x":14.5, "y":2}, {"label":"Enter", "x":15.5, "y":2, "w":2.25}, {"label":"Home", "x":17.75, "y":2}, {"label":"Shift", "x":1, "y":3, "w":2.25}, {"label":"Z", "x":3.25, "y":3}, {"label":"X", "x":4.25, "y":3}, {"label":"C", "x":5.25, "y":3}, {"label":"V", "x":6.25, "y":3}, {"label":"B", "x":7.25, "y":3}, {"label":"B", "x":9.25, "y":3}, {"label":"N", "x":10.25, "y":3}, {"label":"M", "x":11.25, "y":3}, {"label":"<", "x":12.25, "y":3}, {"label":">", "x":13.25, "y":3}, {"label":"?", "x":14.25, "y":3}, {"label":"Shift", "x":15.25, "y":3, "w":1.75}, {"label":"Up", "x":17, "y":3}, {"label":"End", "x":18, "y":3}, {"label":"Ctrl", "x":1, "y":4, "w":1.5}, {"label":"Alt", "x":3.5, "y":4, "w":1.5}, {"x":5, "y":4, "w":2.25}, {"label":"Super", "x":7.25, "y":4, "w":1.25}, {"x":9.25, "y":4, "w":2}, {"label":"Alt", "x":11.25, "y":4, "w":1.5}, {"label":"Left", "x":16, "y":4}, {"label":"Down", "x":17, "y":4}, {"label":"Right", "x":18, "y":4}] diff --git a/keyboards/handwired/owlet60/keymaps/oled_testing/keymap.c b/keyboards/handwired/owlet60/keymaps/oled_testing/keymap.c index 2a89c1c0a0..f617fb5e68 100644 --- a/keyboards/handwired/owlet60/keymaps/oled_testing/keymap.c +++ b/keyboards/handwired/owlet60/keymaps/oled_testing/keymap.c @@ -23,19 +23,19 @@ enum custom_keycodes { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_owlet60_full_bsp( - KC_1, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PGUP, \ - KC_2, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ - KC_3, KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, KC_HOME, \ - KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, \ - KC_LCTL, KC_LALT, KC_SPC, MO(1),KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT \ + KC_1, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PGUP, + KC_2, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, + KC_3, KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, KC_HOME, + KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LALT, KC_SPC, MO(1),KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT ), [1] = LAYOUT_owlet60_full_bsp( - KC_NO, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, RGB_TOG, \ - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_MOD, \ - KC_NO, KC_NO,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,KC_NO, KC_NO, RGB_VAI, \ - KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_N, KC_NO, KC_NO,KC_NO, KC_NO, KC_NO, KC_TRNS, RGB_VAD, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + KC_NO, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, RGB_TOG, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_MOD, + KC_NO, KC_NO,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,KC_NO, KC_NO, RGB_VAI, + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_N, KC_NO, KC_NO,KC_NO, KC_NO, KC_NO, KC_TRNS, RGB_VAD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ) }; diff --git a/keyboards/handwired/owlet60/matrix.c b/keyboards/handwired/owlet60/matrix.c index 3b68c08b45..ad36c99039 100644 --- a/keyboards/handwired/owlet60/matrix.c +++ b/keyboards/handwired/owlet60/matrix.c @@ -200,7 +200,7 @@ void matrix_init(void) { debounce_init(MATRIX_ROWS); - matrix_init_quantum(); + matrix_init_kb(); setPinInput(D5); setPinInput(B0); @@ -217,7 +217,7 @@ uint8_t matrix_scan(void) debounce(raw_matrix, matrix, MATRIX_ROWS, changed); - matrix_scan_quantum(); + matrix_scan_kb(); return (uint8_t)changed; } @@ -235,7 +235,7 @@ uint8_t matrix_scan(void) debounce(raw_matrix, matrix, MATRIX_ROWS, changed); - matrix_scan_quantum(); + matrix_scan_kb(); return (uint8_t)changed; } */ diff --git a/keyboards/handwired/owlet60/rules.mk b/keyboards/handwired/owlet60/rules.mk index 193e837a5e..dd125034f2 100644 --- a/keyboards/handwired/owlet60/rules.mk +++ b/keyboards/handwired/owlet60/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # @@ -20,5 +14,3 @@ CUSTOM_MATRIX = yes OLED_ENABLE = no SRC += matrix.c - -LAYOUTS = alice alice_split_bs diff --git a/keyboards/handwired/p65rgb/config.h b/keyboards/handwired/p65rgb/config.h index 8f94c7a702..4d6195c3c4 100644 --- a/keyboards/handwired/p65rgb/config.h +++ b/keyboards/handwired/p65rgb/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 17 /* key matrix pins */ #define MATRIX_ROW_PINS { C7, C6, B6, B5, D5 } @@ -87,12 +82,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define ENABLE_RGB_MATRIX_SOLID_SPLASH #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/p65rgb/info.json b/keyboards/handwired/p65rgb/info.json index 5daf9d1c99..1b8e87a2c8 100644 --- a/keyboards/handwired/p65rgb/info.json +++ b/keyboards/handwired/p65rgb/info.json @@ -8,6 +8,8 @@ "pid": "0x75B4", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "qmk-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/p65rgb/rules.mk b/keyboards/handwired/p65rgb/rules.mk index be2f090b13..b5bcf508c4 100644 --- a/keyboards/handwired/p65rgb/rules.mk +++ b/keyboards/handwired/p65rgb/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = qmk-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/pilcrow/config.h b/keyboards/handwired/pilcrow/config.h index c846dd387a..8ae32975fe 100644 --- a/keyboards/handwired/pilcrow/config.h +++ b/keyboards/handwired/pilcrow/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 10 /* * Keyboard Matrix Assignments @@ -38,18 +33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -57,27 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/handwired/pilcrow/info.json b/keyboards/handwired/pilcrow/info.json index ee3a0e733d..2c05b74a36 100644 --- a/keyboards/handwired/pilcrow/info.json +++ b/keyboards/handwired/pilcrow/info.json @@ -8,6 +8,8 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/pilcrow/rules.mk b/keyboards/handwired/pilcrow/rules.mk index 9b2c210d42..b6e2a5f9a4 100644 --- a/keyboards/handwired/pilcrow/rules.mk +++ b/keyboards/handwired/pilcrow/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/pill60/blackpill_f401/info.json b/keyboards/handwired/pill60/blackpill_f401/info.json new file mode 100644 index 0000000000..acd7e83f77 --- /dev/null +++ b/keyboards/handwired/pill60/blackpill_f401/info.json @@ -0,0 +1,5 @@ +{ + "processor": "STM32F401", + "bootloader": "stm32-dfu", + "board": "BLACKPILL_STM32_F401" +} diff --git a/keyboards/handwired/pill60/blackpill_f401/rules.mk b/keyboards/handwired/pill60/blackpill_f401/rules.mk index 8d72b0e446..3d2bfceea9 100644 --- a/keyboards/handwired/pill60/blackpill_f401/rules.mk +++ b/keyboards/handwired/pill60/blackpill_f401/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F401 -BOARD = BLACKPILL_STM32_F401 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/pill60/blackpill_f411/info.json b/keyboards/handwired/pill60/blackpill_f411/info.json new file mode 100644 index 0000000000..2517a82403 --- /dev/null +++ b/keyboards/handwired/pill60/blackpill_f411/info.json @@ -0,0 +1,5 @@ +{ + "processor": "STM32F411", + "bootloader": "stm32-dfu", + "board": "BLACKPILL_STM32_F411" +} diff --git a/keyboards/handwired/pill60/blackpill_f411/rules.mk b/keyboards/handwired/pill60/blackpill_f411/rules.mk index 13a6cb5286..b5f27c93ea 100644 --- a/keyboards/handwired/pill60/blackpill_f411/rules.mk +++ b/keyboards/handwired/pill60/blackpill_f411/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F411 -BOARD = BLACKPILL_STM32_F411 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/pill60/bluepill/info.json b/keyboards/handwired/pill60/bluepill/info.json new file mode 100644 index 0000000000..cf993be247 --- /dev/null +++ b/keyboards/handwired/pill60/bluepill/info.json @@ -0,0 +1,4 @@ +{ + "processor": "STM32F103", + "bootloader": "stm32duino" +} diff --git a/keyboards/handwired/pill60/bluepill/rules.mk b/keyboards/handwired/pill60/bluepill/rules.mk index 019b1130d9..a92b099328 100644 --- a/keyboards/handwired/pill60/bluepill/rules.mk +++ b/keyboards/handwired/pill60/bluepill/rules.mk @@ -1,8 +1,2 @@ -# MCU name -MCU = STM32F103 - -# Bootloader selection -BOOTLOADER = stm32duino - # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/handwired/pill60/config.h b/keyboards/handwired/pill60/config.h index 90edb12b87..8b671a9e03 100644 --- a/keyboards/handwired/pill60/config.h +++ b/keyboards/handwired/pill60/config.h @@ -15,15 +15,9 @@ */ #pragma once -#include "config_common.h" -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 #define DIODE_DIRECTION COL2ROW -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 1 - /* Backlighting include */ #define BACKLIGHT_PIN B14 #define BACKLIGHT_PWM_DRIVER PWMD5 diff --git a/keyboards/handwired/pill60/info.json b/keyboards/handwired/pill60/info.json index 02fb75983a..bc92cf7585 100644 --- a/keyboards/handwired/pill60/info.json +++ b/keyboards/handwired/pill60/info.json @@ -8,6 +8,7 @@ "pid": "0x5444", "device_version": "0.0.1" }, + "debounce": 1, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/postageboard/config.h b/keyboards/handwired/postageboard/config.h deleted file mode 100644 index 417cc9901c..0000000000 --- a/keyboards/handwired/postageboard/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* -Copyright 2019 Yan-Fa Li - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" - diff --git a/keyboards/handwired/postageboard/mini/config.h b/keyboards/handwired/postageboard/mini/config.h index e245460161..b9a34e1414 100644 --- a/keyboards/handwired/postageboard/mini/config.h +++ b/keyboards/handwired/postageboard/mini/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 3 /* * Keyboard Matrix Assignments @@ -39,14 +34,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/postageboard/mini/info.json b/keyboards/handwired/postageboard/mini/info.json index e557e4d307..65be217368 100644 --- a/keyboards/handwired/postageboard/mini/info.json +++ b/keyboards/handwired/postageboard/mini/info.json @@ -1,5 +1,7 @@ { "usb": { "device_version": "0.0.2" - } + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu" } diff --git a/keyboards/handwired/postageboard/mini/rules.mk b/keyboards/handwired/postageboard/mini/rules.mk index 354f194ca2..309e55c9f4 100644 --- a/keyboards/handwired/postageboard/mini/rules.mk +++ b/keyboards/handwired/postageboard/mini/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/postageboard/r1/config.h b/keyboards/handwired/postageboard/r1/config.h index 631a479455..68c6dc0281 100644 --- a/keyboards/handwired/postageboard/r1/config.h +++ b/keyboards/handwired/postageboard/r1/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 3 /* * Keyboard Matrix Assignments @@ -39,14 +34,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/postageboard/r1/info.json b/keyboards/handwired/postageboard/r1/info.json index 90ac25f360..dab37baf04 100644 --- a/keyboards/handwired/postageboard/r1/info.json +++ b/keyboards/handwired/postageboard/r1/info.json @@ -1,5 +1,7 @@ { "usb": { "device_version": "0.0.1" - } + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu" } diff --git a/keyboards/handwired/postageboard/r1/rules.mk b/keyboards/handwired/postageboard/r1/rules.mk index 354f194ca2..309e55c9f4 100644 --- a/keyboards/handwired/postageboard/r1/rules.mk +++ b/keyboards/handwired/postageboard/r1/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/prime_exl/config.h b/keyboards/handwired/prime_exl/config.h index 37f514fc08..b08731f0a2 100644 --- a/keyboards/handwired/prime_exl/config.h +++ b/keyboards/handwired/prime_exl/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 10 -#define MATRIX_COLS 9 /* Keyboard Matrix Assignments */ #define MATRIX_ROW_PINS { B1, E6, D5, D6, B4, D7, D4, F1, F0, B0 } @@ -33,9 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PIN B7 #define BACKLIGHT_LEVELS 5 -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/prime_exl/info.json b/keyboards/handwired/prime_exl/info.json index 9c40e5e69e..d8949ec389 100644 --- a/keyboards/handwired/prime_exl/info.json +++ b/keyboards/handwired/prime_exl/info.json @@ -8,6 +8,8 @@ "pid": "0x6578", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [{"x":0,"y":0,"w":1,"h":1}, {"x":1,"y":0,"w":1,"h":1}, {"x":2,"y":0,"w":1,"h":1}, {"x":3,"y":0,"w":1,"h":1}, {"x":4,"y":0,"w":1,"h":1}, {"x":5,"y":0,"w":1,"h":1}, {"x":6.5,"y":0,"w":1,"h":1}, {"x":7.5,"y":0,"w":1,"h":1}, {"x":8.5,"y":0,"w":1,"h":1}, {"x":9.5,"y":0,"w":1,"h":1}, {"x":10.5,"y":0,"w":1,"h":1}, {"x":11.5,"y":0,"w":1,"h":1}, {"x":13.75,"y":0,"w":1,"h":1}, {"x":14.75,"y":0,"w":1,"h":1}, {"x":15.75,"y":0,"w":1,"h":1}, {"x":16.75,"y":0,"w":1,"h":1}, {"x":17.75,"y":0,"w":1,"h":1}, {"x":18.75,"y":0,"w":2,"h":1}, {"x":0,"y":1,"w":1,"h":1}, {"x":1,"y":1,"w":1,"h":1}, {"x":2,"y":1,"w":1,"h":1}, {"x":3,"y":1,"w":1,"h":1}, {"x":4,"y":1,"w":1,"h":1}, {"x":5,"y":1,"w":1,"h":1}, {"x":6.5,"y":1,"w":1.25,"h":1}, {"x":7.75,"y":1,"w":1,"h":1}, {"x":8.75,"y":1,"w":1,"h":1}, {"x":9.75,"y":1,"w":1,"h":1}, {"x":10.75,"y":1,"w":1,"h":1}, {"x":11.75,"y":1,"w":1,"h":1}, {"x":14,"y":1,"w":1,"h":1}, {"x":15,"y":1,"w":1,"h":1}, {"x":16,"y":1,"w":1,"h":1}, {"x":17,"y":1,"w":1,"h":1}, {"x":18,"y":1,"w":1,"h":1}, {"x":19,"y":1,"w":1.75,"h":1}, {"x":0,"y":2,"w":1,"h":1}, {"x":1,"y":2,"w":1,"h":1}, {"x":2,"y":2,"w":1,"h":1}, {"x":3,"y":2,"w":1,"h":1}, {"x":4,"y":2,"w":1,"h":1}, {"x":5,"y":2,"w":1,"h":1}, {"x":6.5,"y":2,"w":1.75,"h":1}, {"x":8.25,"y":2,"w":1,"h":1}, {"x":9.25,"y":2,"w":1,"h":1}, {"x":10.25,"y":2,"w":1,"h":1}, {"x":11.25,"y":2,"w":1,"h":1}, {"x":12.25,"y":2,"w":1,"h":1}, {"x":13.5,"y":2,"w":1,"h":1}, {"x":14.5,"y":2,"w":1,"h":1}, {"x":15.5,"y":2,"w":1,"h":1}, {"x":16.5,"y":2,"w":1,"h":1}, {"x":17.5,"y":2,"w":1,"h":1}, {"x":18.5,"y":2,"w":1,"h":1}, {"x":19.5,"y":2,"w":1.25,"h":1}, {"x":0,"y":3,"w":1,"h":1}, {"x":1,"y":3,"w":1,"h":1}, {"x":2,"y":3,"w":1,"h":1}, {"x":3,"y":3,"w":1,"h":1}, {"x":4,"y":3,"w":1,"h":1}, {"x":5,"y":3,"w":1,"h":1}, {"x":6.5,"y":3,"w":1.25,"h":1}, {"x":7.75,"y":3,"w":1.25,"h":1}, {"x":9,"y":3,"w":1,"h":1}, {"x":10,"y":3,"w":1,"h":1}, {"x":11,"y":3,"w":2,"h":1}, {"x":13.5,"y":3,"w":2,"h":1}, {"x":15.5,"y":3,"w":1,"h":1}, {"x":16.5,"y":3,"w":1,"h":1}, {"x":17.5,"y":3,"w":1.5,"h":1}, {"x":19,"y":3,"w":1.5,"h":1}, {"x":0,"y":4,"w":1,"h":1}, {"x":1,"y":4,"w":1,"h":1}, {"x":2,"y":4,"w":1,"h":1}, {"x":3,"y":4,"w":1,"h":1}, {"x":4,"y":4,"w":1,"h":1}, {"x":5,"y":4,"w":1,"h":1}] diff --git a/keyboards/handwired/prime_exl/rules.mk b/keyboards/handwired/prime_exl/rules.mk index e9ceebba3b..9ce191fd81 100644 --- a/keyboards/handwired/prime_exl/rules.mk +++ b/keyboards/handwired/prime_exl/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/prime_exl_plus/config.h b/keyboards/handwired/prime_exl_plus/config.h index ba138eb42d..935d12bedb 100644 --- a/keyboards/handwired/prime_exl_plus/config.h +++ b/keyboards/handwired/prime_exl_plus/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 10 -#define MATRIX_COLS 10 /* Keyboard Matrix Assignments */ #define MATRIX_ROW_PINS { D2, D6, B4, F1, E6, F0, F4, B5, D7, D3 } @@ -43,9 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/prime_exl_plus/info.json b/keyboards/handwired/prime_exl_plus/info.json index 1ae1b33152..d15982860f 100644 --- a/keyboards/handwired/prime_exl_plus/info.json +++ b/keyboards/handwired/prime_exl_plus/info.json @@ -8,6 +8,8 @@ "pid": "0x6579", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [{"label":"K040", "x":0, "y":0}, {"label":"K050", "x":1, "y":0}, {"label":"K041", "x":2, "y":0}, {"label":"K051", "x":3, "y":0}, {"label":"K042", "x":4, "y":0}, {"label":"K052", "x":5, "y":0}, {"label":"K043", "x":6.5, "y":0}, {"label":"K053", "x":7.5, "y":0}, {"label":"K044", "x":8.5, "y":0}, {"label":"K054", "x":9.5, "y":0}, {"label":"K045", "x":10.5, "y":0}, {"label":"K055", "x":11.5, "y":0}, {"label":"K046", "x":14, "y":0}, {"label":"K056", "x":15, "y":0}, {"label":"K047", "x":16, "y":0}, {"label":"K057", "x":17, "y":0}, {"label":"K048", "x":18, "y":0}, {"label":"K058", "x":19, "y":0, "w":2}, {"label":"K030", "x":0, "y":1}, {"label":"K060", "x":1, "y":1}, {"label":"K031", "x":2, "y":1}, {"label":"K061", "x":3, "y":1}, {"label":"K032", "x":4, "y":1}, {"label":"K062", "x":5, "y":1}, {"label":"K033", "x":6.5, "y":1}, {"label":"K063", "x":7.5, "y":1}, {"label":"K034", "x":8.5, "y":1}, {"label":"K064", "x":9.5, "y":1}, {"label":"K035", "x":10.5, "y":1}, {"label":"K065", "x":11.5, "y":1}, {"label":"K036", "x":14, "y":1}, {"label":"K066", "x":15, "y":1}, {"label":"K037", "x":16, "y":1}, {"label":"K067", "x":17, "y":1}, {"label":"K038", "x":18, "y":1}, {"label":"K068", "x":19, "y":1}, {"label":"K039", "x":20, "y":1}, {"label":"K020", "x":0, "y":2}, {"label":"K070", "x":1, "y":2}, {"label":"K021", "x":2, "y":2}, {"label":"K071", "x":3, "y":2}, {"label":"K022", "x":4, "y":2}, {"label":"K072", "x":5, "y":2}, {"label":"K023", "x":6.5, "y":2, "w":1.25}, {"label":"K073", "x":7.75, "y":2}, {"label":"K024", "x":8.75, "y":2}, {"label":"K074", "x":9.75, "y":2}, {"label":"K025", "x":10.75, "y":2}, {"label":"K075", "x":11.75, "y":2}, {"label":"K026", "x":14.25, "y":2}, {"label":"K076", "x":15.25, "y":2}, {"label":"K027", "x":16.25, "y":2}, {"label":"K077", "x":17.25, "y":2}, {"label":"K028", "x":18.25, "y":2}, {"label":"K029", "x":19.25, "y":2, "w":1.75}, {"label":"K010", "x":0, "y":3}, {"label":"K080", "x":1, "y":3}, {"label":"K011", "x":2, "y":3}, {"label":"K081", "x":3, "y":3}, {"label":"K012", "x":4, "y":3}, {"label":"K082", "x":5, "y":3}, {"label":"K013", "x":6.5, "y":3, "w":1.75}, {"label":"K083", "x":8.25, "y":3}, {"label":"K014", "x":9.25, "y":3}, {"label":"K084", "x":10.25, "y":3}, {"label":"K015", "x":11.25, "y":3}, {"label":"K085", "x":12.25, "y":3}, {"label":"K016", "x":13.75, "y":3}, {"label":"K086", "x":14.75, "y":3}, {"label":"K017", "x":15.75, "y":3}, {"label":"K087", "x":16.75, "y":3}, {"label":"K018", "x":17.75, "y":3}, {"label":"K088", "x":18.75, "y":3}, {"label":"K019", "x":19.75, "y":3, "w":1.25}, {"label":"K000", "x":0, "y":4}, {"label":"K090", "x":1, "y":4}, {"label":"K001", "x":2, "y":4}, {"label":"K091", "x":3, "y":4}, {"label":"K002", "x":4, "y":4}, {"label":"K092", "x":5, "y":4}, {"label":"K003", "x":6.5, "y":4, "w":1.25}, {"label":"K093", "x":7.75, "y":4, "w":1.25}, {"label":"K004", "x":10.25, "y":4, "w":1.25}, {"label":"K095", "x":11.5, "y":4, "w":1.75}, {"label":"K006", "x":13.75, "y":4, "w":1.75}, {"label":"K097", "x":15.5, "y":4, "w":1.25}, {"label":"K098", "x":18.5, "y":4, "w":1.25}, {"label":"K009", "x":19.75, "y":4, "w":1.25}] diff --git a/keyboards/handwired/prime_exl_plus/rules.mk b/keyboards/handwired/prime_exl_plus/rules.mk index 61ec6a921a..18684e62d3 100644 --- a/keyboards/handwired/prime_exl_plus/rules.mk +++ b/keyboards/handwired/prime_exl_plus/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/prkl30/feather/config.h b/keyboards/handwired/prkl30/feather/config.h index 0fbe096264..5e94752e1b 100644 --- a/keyboards/handwired/prkl30/feather/config.h +++ b/keyboards/handwired/prkl30/feather/config.h @@ -14,11 +14,6 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 10 /* PRKL30 feather pinout */ #define MATRIX_ROW_PINS { F4, F1, F0, D2} diff --git a/keyboards/handwired/prkl30/feather/rules.mk b/keyboards/handwired/prkl30/feather/rules.mk index 7578dcef74..6b109855a5 100644 --- a/keyboards/handwired/prkl30/feather/rules.mk +++ b/keyboards/handwired/prkl30/feather/rules.mk @@ -1,12 +1,6 @@ -# MCU name -MCU = atmega32u4 - # Processor frequency F_CPU = 8000000 -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/prkl30/info.json b/keyboards/handwired/prkl30/info.json index b122fe3328..3ba3e52511 100644 --- a/keyboards/handwired/prkl30/info.json +++ b/keyboards/handwired/prkl30/info.json @@ -8,6 +8,8 @@ "pid": "0x0030", "device_version": "0.0.2" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT_all": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0, "w":1.5}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12.25, "y":1, "w":1.25, "h":2}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2, "w":1.25}] diff --git a/keyboards/handwired/prkl30/promicro/config.h b/keyboards/handwired/prkl30/promicro/config.h index 9cb58298fd..6edad3bc5c 100644 --- a/keyboards/handwired/prkl30/promicro/config.h +++ b/keyboards/handwired/prkl30/promicro/config.h @@ -14,11 +14,6 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 10 /* prkl30 default pinout */ #define MATRIX_ROW_PINS { D4, C6, D7, E6 } diff --git a/keyboards/handwired/prkl30/promicro/rules.mk b/keyboards/handwired/prkl30/promicro/rules.mk index 82dfbafa4e..a4e07e76d8 100644 --- a/keyboards/handwired/prkl30/promicro/rules.mk +++ b/keyboards/handwired/prkl30/promicro/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/promethium/config.h b/keyboards/handwired/promethium/config.h index b5f0465980..09a981afe1 100644 --- a/keyboards/handwired/promethium/config.h +++ b/keyboards/handwired/promethium/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_COLS 6 @@ -43,56 +42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #define DIODE_DIRECTION COL2ROW -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -// #define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -// #define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - /* key combination for command */ #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT) | MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL))) diff --git a/keyboards/handwired/promethium/info.json b/keyboards/handwired/promethium/info.json index 618b680ff1..cd5928f4d4 100644 --- a/keyboards/handwired/promethium/info.json +++ b/keyboards/handwired/promethium/info.json @@ -8,6 +8,8 @@ "pid": "0x6048", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/promethium/keymaps/default/keymap.c b/keyboards/handwired/promethium/keymaps/default/keymap.c index b72d54f175..21dd99d95a 100644 --- a/keyboards/handwired/promethium/keymaps/default/keymap.c +++ b/keyboards/handwired/promethium/keymaps/default/keymap.c @@ -256,7 +256,7 @@ enum unicode_name { PLMIN, }; -const uint32_t PROGMEM unicode_map[] = { +const uint32_t unicode_map[] PROGMEM = { [GRIN] = 0x1F600, [TJOY] = 0x1F602, [SMILE] = 0x1F601, @@ -1272,7 +1272,7 @@ void set_output_user(uint8_t output) { #endif } -void matrix_init_user() { +void matrix_init_user(void) { wait_ms(500); // give time for usb to initialize set_unicode_input_mode(UNICODE_MODE_LINUX); @@ -1292,7 +1292,7 @@ void matrix_init_user() { #endif } -void turn_off_capslock() { +void turn_off_capslock(void) { if (capslock) { register_code(KC_CAPS); unregister_code(KC_CAPS); @@ -1323,7 +1323,7 @@ void turn_off_capslock() { #endif #ifdef PS2_MOUSE_ENABLE - void ps2_mouse_init_user() { + void ps2_mouse_init_user(void) { uint8_t rcv; // set TrackPoint sensitivity diff --git a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c index 11fd8ed74d..1ebf63037b 100644 --- a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c +++ b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c @@ -259,7 +259,7 @@ enum unicode_name { PLMIN, }; -const uint32_t PROGMEM unicode_map[] = { +const uint32_t unicode_map[] PROGMEM = { [GRIN] = 0x1F600, [TJOY] = 0x1F602, [SMILE] = 0x1F601, @@ -1275,7 +1275,7 @@ void set_output_user(uint8_t output) { #endif } -void matrix_init_user() { +void matrix_init_user(void) { wait_ms(500); // give time for usb to initialize set_unicode_input_mode(UNICODE_MODE_LINUX); @@ -1295,7 +1295,7 @@ void matrix_init_user() { #endif } -void turn_off_capslock() { +void turn_off_capslock(void) { if (capslock) { register_code(KC_CAPS); unregister_code(KC_CAPS); @@ -1326,7 +1326,7 @@ void turn_off_capslock() { #endif #ifdef PS2_MOUSE_ENABLE - void ps2_mouse_init_user() { + void ps2_mouse_init_user(void) { uint8_t rcv; // set TrackPoint sensitivity diff --git a/keyboards/handwired/promethium/matrix.c b/keyboards/handwired/promethium/matrix.c index 3b03ab8893..9f6d707aab 100644 --- a/keyboards/handwired/promethium/matrix.c +++ b/keyboards/handwired/promethium/matrix.c @@ -111,7 +111,7 @@ void matrix_init(void) { matrix_debouncing[i] = 0; } - matrix_init_quantum(); + matrix_init_kb(); } uint8_t matrix_scan(void) @@ -141,7 +141,7 @@ uint8_t matrix_scan(void) } # endif - matrix_scan_quantum(); + matrix_scan_kb(); return 1; } diff --git a/keyboards/handwired/promethium/rules.mk b/keyboards/handwired/promethium/rules.mk index 3960980dff..038266add8 100644 --- a/keyboards/handwired/promethium/rules.mk +++ b/keyboards/handwired/promethium/rules.mk @@ -1,12 +1,6 @@ -# MCU name -MCU = atmega32u4 - # Processor frequency F_CPU = 8000000 -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/pterodactyl/config.h b/keyboards/handwired/pterodactyl/config.h index eb67deecc4..6ca97d3e73 100644 --- a/keyboards/handwired/pterodactyl/config.h +++ b/keyboards/handwired/pterodactyl/config.h @@ -19,7 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -#include "config_common.h" #define DIODE_DIRECTION COL2ROW #define MATRIX_ROWS 6 @@ -50,6 +49,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* fix space cadet rollover issue */ #define DISABLE_SPACE_CADET_ROLLOVER - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 0 diff --git a/keyboards/handwired/pterodactyl/info.json b/keyboards/handwired/pterodactyl/info.json index 77d5db7ec7..ac0c498da7 100644 --- a/keyboards/handwired/pterodactyl/info.json +++ b/keyboards/handwired/pterodactyl/info.json @@ -8,6 +8,9 @@ "pid": "0x1308", "device_version": "0.0.2" }, + "processor": "atmega32u4", + "bootloader": "caterina", + "debounce": 0, "layouts": { "LAYOUT_pterodactyl": { "layout": [ diff --git a/keyboards/handwired/pterodactyl/matrix.c b/keyboards/handwired/pterodactyl/matrix.c index 9d81a64bb4..c12cf5a322 100644 --- a/keyboards/handwired/pterodactyl/matrix.c +++ b/keyboards/handwired/pterodactyl/matrix.c @@ -137,7 +137,7 @@ void matrix_init(void) matrix_debouncing[i] = 0; } - matrix_init_quantum(); + matrix_init_kb(); } void init_expander(void) { @@ -278,7 +278,7 @@ uint8_t matrix_scan(void) } # endif - matrix_scan_quantum(); + matrix_scan_kb(); return 1; } diff --git a/keyboards/handwired/pterodactyl/rules.mk b/keyboards/handwired/pterodactyl/rules.mk index fd63e2ad48..eb2487d410 100644 --- a/keyboards/handwired/pterodactyl/rules.mk +++ b/keyboards/handwired/pterodactyl/rules.mk @@ -1,12 +1,6 @@ -# MCU name -MCU = atmega32u4 - # Processor frequency F_CPU = 8000000 -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/pteron/config.h b/keyboards/handwired/pteron/config.h index 5d26b9f430..61e8611e24 100644 --- a/keyboards/handwired/pteron/config.h +++ b/keyboards/handwired/pteron/config.h @@ -1,10 +1,5 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 12 /* key matrix pins */ #define MATRIX_ROW_PINS { D7, E6, B4, B5, B6 } @@ -12,6 +7,3 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION ROW2COL - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 // 5 is default diff --git a/keyboards/handwired/pteron/info.json b/keyboards/handwired/pteron/info.json index f23728f92e..b21d12c9f9 100644 --- a/keyboards/handwired/pteron/info.json +++ b/keyboards/handwired/pteron/info.json @@ -8,6 +8,8 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/pteron/rules.mk b/keyboards/handwired/pteron/rules.mk index 9f51ea20cf..a77b52c38b 100644 --- a/keyboards/handwired/pteron/rules.mk +++ b/keyboards/handwired/pteron/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/pteron38/config.h b/keyboards/handwired/pteron38/config.h index a877d8dfa3..f5b0230911 100644 --- a/keyboards/handwired/pteron38/config.h +++ b/keyboards/handwired/pteron38/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 10 /* key matrix pins */ #define MATRIX_ROW_PINS { E6, B4, B5, B6 } @@ -28,6 +23,3 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 /* 5 is default */ diff --git a/keyboards/handwired/pteron38/info.json b/keyboards/handwired/pteron38/info.json index 2051d86e0b..a2ea58d57a 100644 --- a/keyboards/handwired/pteron38/info.json +++ b/keyboards/handwired/pteron38/info.json @@ -8,6 +8,8 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_split_3x5_4": { "layout": [ diff --git a/keyboards/handwired/pteron38/rules.mk b/keyboards/handwired/pteron38/rules.mk index 172f6cbeca..3e66b069b3 100644 --- a/keyboards/handwired/pteron38/rules.mk +++ b/keyboards/handwired/pteron38/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/pteron44/config.h b/keyboards/handwired/pteron44/config.h index 517d498eaa..6429437f97 100644 --- a/keyboards/handwired/pteron44/config.h +++ b/keyboards/handwired/pteron44/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 /* key matrix pins */ #define MATRIX_ROW_PINS { E6, B4, B5, B6 } @@ -28,6 +23,3 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 // 5 is default diff --git a/keyboards/handwired/pteron44/info.json b/keyboards/handwired/pteron44/info.json index 53b123dbe0..23b4ac785a 100644 --- a/keyboards/handwired/pteron44/info.json +++ b/keyboards/handwired/pteron44/info.json @@ -8,6 +8,8 @@ "pid": "0x542C", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/pteron44/rules.mk b/keyboards/handwired/pteron44/rules.mk index 172f6cbeca..3e66b069b3 100644 --- a/keyboards/handwired/pteron44/rules.mk +++ b/keyboards/handwired/pteron44/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/pytest/config.h b/keyboards/handwired/pytest/config.h index f03597a7d4..a61b8f5094 100644 --- a/keyboards/handwired/pytest/config.h +++ b/keyboards/handwired/pytest/config.h @@ -1,10 +1,5 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 #define MATRIX_COL_PINS { F4 } #define MATRIX_ROW_PINS { F5 } diff --git a/keyboards/handwired/pytest/has_community/info.json b/keyboards/handwired/pytest/has_community/info.json new file mode 100644 index 0000000000..59dcee260c --- /dev/null +++ b/keyboards/handwired/pytest/has_community/info.json @@ -0,0 +1,3 @@ +{ + "community_layouts": ["ortho_1x1"] +} diff --git a/keyboards/handwired/pytest/has_community/rules.mk b/keyboards/handwired/pytest/has_community/rules.mk index 051634b3a4..e69de29bb2 100644 --- a/keyboards/handwired/pytest/has_community/rules.mk +++ b/keyboards/handwired/pytest/has_community/rules.mk @@ -1 +0,0 @@ -LAYOUTS = ortho_1x1 diff --git a/keyboards/handwired/qc60/config.h b/keyboards/handwired/qc60/config.h index a1719ce06f..6f70f09bee 100644 --- a/keyboards/handwired/qc60/config.h +++ b/keyboards/handwired/qc60/config.h @@ -1,14 +1 @@ #pragma once - -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 10 -#define MATRIX_COLS 8 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* serial.c configuration for split keyboard */ -#define SOFT_SERIAL_PIN D0 diff --git a/keyboards/handwired/qc60/info.json b/keyboards/handwired/qc60/info.json index f3ccde01db..e36142dea8 100644 --- a/keyboards/handwired/qc60/info.json +++ b/keyboards/handwired/qc60/info.json @@ -8,6 +8,11 @@ "pid": "0x0C60", "device_version": "1.0.0" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/qc60/keymaps/wntrmln/keymap.c b/keyboards/handwired/qc60/keymaps/wntrmln/keymap.c index 58b70d79dc..dd12206b26 100644 --- a/keyboards/handwired/qc60/keymaps/wntrmln/keymap.c +++ b/keyboards/handwired/qc60/keymaps/wntrmln/keymap.c @@ -29,18 +29,18 @@ extern keymap_config_t keymap_config; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_BASE] = LAYOUT_hhkb_split_lshift( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_DEL, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_RSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_CAPS, \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_RSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_CAPS, FN, KC_LALT, KC_SPC, KC_F13, KC_BSLS, KC_SPC, KC_RALT, KC_LGUI ), [_FN] = LAYOUT_hhkb_split_lshift( - QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_NUM, _______, _______, _______, _______ ), diff --git a/keyboards/handwired/qc60/proto/config.h b/keyboards/handwired/qc60/proto/config.h index 8c21fa9265..2e7d2f3b9b 100644 --- a/keyboards/handwired/qc60/proto/config.h +++ b/keyboards/handwired/qc60/proto/config.h @@ -1,6 +1,5 @@ #pragma once -#include "config_common.h" // wiring of each half #define MATRIX_ROW_PINS { F4, F5, C6, D7, E6 } diff --git a/keyboards/handwired/qc60/rules.mk b/keyboards/handwired/qc60/rules.mk index 524a0678cd..9af766b35c 100644 --- a/keyboards/handwired/qc60/rules.mk +++ b/keyboards/handwired/qc60/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/reclined/config.h b/keyboards/handwired/reclined/config.h index 6f8159a236..0606be9b1b 100644 --- a/keyboards/handwired/reclined/config.h +++ b/keyboards/handwired/reclined/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ @@ -27,28 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LOCKING_RESYNC_ENABLE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/handwired/reclined/info.json b/keyboards/handwired/reclined/info.json index bc928b2b44..8699edea43 100644 --- a/keyboards/handwired/reclined/info.json +++ b/keyboards/handwired/reclined/info.json @@ -3,7 +3,6 @@ "keyboard_name": "handwired/reclined", "maintainer": "qmk", "bootloader": "atmel-dfu", - "debounce": 5, "diode_direction": "ROW2COL", "features": { "command": true, diff --git a/keyboards/handwired/retro_refit/config.h b/keyboards/handwired/retro_refit/config.h index 34a16b6c37..a08c558a1a 100644 --- a/keyboards/handwired/retro_refit/config.h +++ b/keyboards/handwired/retro_refit/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 11 -#define MATRIX_COLS 8 // See note in retro_refit.h for an explanation of how this matrix is wired up #define MATRIX_ROW_PINS { D4, D7, B4, B5, B6, F7, F6, F5, F4, F1, F0 } @@ -30,12 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -44,18 +33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Force NKRO Mode - If forced on, must be disabled via magic key (default = LShift+RShift+N) */ #define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - /* remap magic keys */ #define MAGIC_KEY_LOCK BSLS diff --git a/keyboards/handwired/retro_refit/info.json b/keyboards/handwired/retro_refit/info.json index beb03c6a0e..a04b54cf95 100644 --- a/keyboards/handwired/retro_refit/info.json +++ b/keyboards/handwired/retro_refit/info.json @@ -8,6 +8,8 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/retro_refit/rules.mk b/keyboards/handwired/retro_refit/rules.mk index 4d1b278f53..eb35f5c4d2 100644 --- a/keyboards/handwired/retro_refit/rules.mk +++ b/keyboards/handwired/retro_refit/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/riblee_f401/config.h b/keyboards/handwired/riblee_f401/config.h index ed0ff636f1..886c1f7fc7 100644 --- a/keyboards/handwired/riblee_f401/config.h +++ b/keyboards/handwired/riblee_f401/config.h @@ -16,10 +16,6 @@ #pragma once -#include "config_common.h" - -#define MATRIX_ROWS 5 -#define MATRIX_COLS 12 #define MATRIX_ROW_PINS { A6, A5, A4, A3, A2 } #define MATRIX_COL_PINS { B10, B1, B0, B15, A8, B3, B4, B5, B6, B7, B8, B9 } diff --git a/keyboards/handwired/riblee_f401/info.json b/keyboards/handwired/riblee_f401/info.json index 2852e621d1..ec9c7631af 100644 --- a/keyboards/handwired/riblee_f401/info.json +++ b/keyboards/handwired/riblee_f401/info.json @@ -8,6 +8,10 @@ "pid": "0x002A", "device_version": "0.0.1" }, + "processor": "STM32F401", + "bootloader": "stm32-dfu", + "board": "BLACKPILL_STM32_F401", + "community_layouts": ["ortho_5x12"], "layouts": { "LAYOUT_ortho_5x12": { "layout": [ diff --git a/keyboards/handwired/riblee_f401/rules.mk b/keyboards/handwired/riblee_f401/rules.mk index 9abda835da..6f9a638f4b 100644 --- a/keyboards/handwired/riblee_f401/rules.mk +++ b/keyboards/handwired/riblee_f401/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F401 -BOARD = BLACKPILL_STM32_F401 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # @@ -19,5 +12,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = software RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = ortho_5x12
\ No newline at end of file diff --git a/keyboards/handwired/riblee_f411/config.h b/keyboards/handwired/riblee_f411/config.h index e855133713..395e35d913 100644 --- a/keyboards/handwired/riblee_f411/config.h +++ b/keyboards/handwired/riblee_f411/config.h @@ -16,10 +16,6 @@ #pragma once -#include "config_common.h" - -#define MATRIX_ROWS 5 -#define MATRIX_COLS 12 #define MATRIX_ROW_PINS { A6, A5, A4, A3, A2 } #define MATRIX_COL_PINS { B10, B1, B0, B15, A8, B3, B4, B5, B14, A0, B8, B9 } diff --git a/keyboards/handwired/riblee_f411/info.json b/keyboards/handwired/riblee_f411/info.json index ac90dd65db..4941f56752 100644 --- a/keyboards/handwired/riblee_f411/info.json +++ b/keyboards/handwired/riblee_f411/info.json @@ -8,6 +8,10 @@ "pid": "0x002B", "device_version": "0.0.1" }, + "processor": "STM32F411", + "bootloader": "stm32-dfu", + "board": "BLACKPILL_STM32_F411", + "community_layouts": ["ortho_5x12"], "layouts": { "LAYOUT_ortho_5x12": { "layout": [ diff --git a/keyboards/handwired/riblee_f411/rules.mk b/keyboards/handwired/riblee_f411/rules.mk index d3ca449aaf..4741169e4d 100644 --- a/keyboards/handwired/riblee_f411/rules.mk +++ b/keyboards/handwired/riblee_f411/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F411 -BOARD = BLACKPILL_STM32_F411 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # @@ -18,5 +11,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = ortho_5x12 diff --git a/keyboards/handwired/rs60/config.h b/keyboards/handwired/rs60/config.h index 506b0bff0d..a4aa91b497 100644 --- a/keyboards/handwired/rs60/config.h +++ b/keyboards/handwired/rs60/config.h @@ -16,10 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 12 - /* key matrix pins */ #define MATRIX_ROW_PINS { B5, B6, B4, B2, E6 } #define MATRIX_COL_PINS { C6, D4, D0, D1, D2, D3, F4, F5, F6, F7, B1, B3} diff --git a/keyboards/handwired/rs60/info.json b/keyboards/handwired/rs60/info.json index cbf81141aa..c96c1da1a3 100644 --- a/keyboards/handwired/rs60/info.json +++ b/keyboards/handwired/rs60/info.json @@ -8,6 +8,9 @@ "pid": "0x4260", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "qmk-dfu", + "community_layouts": ["ortho_5x12"], "layouts": { "LAYOUT_ortho_5x12": { "layout": [ diff --git a/keyboards/handwired/rs60/rules.mk b/keyboards/handwired/rs60/rules.mk index d14abe406b..c827f15dcf 100644 --- a/keyboards/handwired/rs60/rules.mk +++ b/keyboards/handwired/rs60/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = qmk-dfu - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Custom backlighting code is used, so this should not be enabled AUDIO_ENABLE = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below RGBLIGHT_ENABLE = no # This can be enabled if a ws2812 strip is connected to the expansion port. - -LAYOUTS = ortho_5x12 diff --git a/keyboards/handwired/selene/config.h b/keyboards/handwired/selene/config.h index 25603183a7..f0b09a2a7f 100644 --- a/keyboards/handwired/selene/config.h +++ b/keyboards/handwired/selene/config.h @@ -16,10 +16,6 @@ #pragma once -#include "config_common.h" - -#define MATRIX_ROWS 6 -#define MATRIX_COLS 21 #define MATRIX_ROW_PINS { B10, B9, B15, B14, B13, B8} #define MATRIX_COL_PINS { A9, A10, B11, B7, B6, B5, B4, B3, B2, B1, B0, C14, A4, A5, A6, A7, A8, A15, A13, A14, B12 } @@ -30,7 +26,5 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -#define DEBOUNCE 5 - #define LOCKING_SUPPORT_ENABLE #define LOCKING_RESYNC_ENABLE diff --git a/keyboards/handwired/selene/info.json b/keyboards/handwired/selene/info.json index eb515eb11e..c798895e86 100644 --- a/keyboards/handwired/selene/info.json +++ b/keyboards/handwired/selene/info.json @@ -8,6 +8,9 @@ "pid": "0x0001", "device_version": "0.0.1" }, + "processor": "STM32F303", + "bootloader": "stm32-dfu", + "board": "QMK_PROTON_C", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/selene/rules.mk b/keyboards/handwired/selene/rules.mk index 3fa2ca01ee..648f79b599 100644 --- a/keyboards/handwired/selene/rules.mk +++ b/keyboards/handwired/selene/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F303 -BOARD = QMK_PROTON_C - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/sick68/config.h b/keyboards/handwired/sick68/config.h index 60fc1c30ed..018fb3cd48 100644 --- a/keyboards/handwired/sick68/config.h +++ b/keyboards/handwired/sick68/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 /* * Keyboard Matrix Assignments @@ -41,68 +36,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -118,7 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/sick68/info.json b/keyboards/handwired/sick68/info.json index 52bcad8197..eb99897023 100644 --- a/keyboards/handwired/sick68/info.json +++ b/keyboards/handwired/sick68/info.json @@ -8,6 +8,9 @@ "pid": "0x5F00", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", + "community_layouts": ["65_ansi"], "layouts": { "LAYOUT_65_ansi": { "layout": [ diff --git a/keyboards/handwired/sick68/rules.mk b/keyboards/handwired/sick68/rules.mk index d4cb4d6890..fce764c22d 100644 --- a/keyboards/handwired/sick68/rules.mk +++ b/keyboards/handwired/sick68/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = 65_ansi diff --git a/keyboards/handwired/sick_pad/config.h b/keyboards/handwired/sick_pad/config.h index 7f8df32c06..e27980a0eb 100644 --- a/keyboards/handwired/sick_pad/config.h +++ b/keyboards/handwired/sick_pad/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 4 /* key matrix pins */ #define MATRIX_ROW_PINS { B0, B1, B2, B3, B4 } @@ -29,9 +24,6 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/sick_pad/info.json b/keyboards/handwired/sick_pad/info.json index 458526cce8..2a5f85ad68 100644 --- a/keyboards/handwired/sick_pad/info.json +++ b/keyboards/handwired/sick_pad/info.json @@ -8,6 +8,10 @@ "pid": "0xDA20", "device_version": "0.0.1" }, + "processor": "STM32F303", + "bootloader": "stm32-dfu", + "board": "QMK_PROTON_C", + "community_layouts": ["numpad_5x4"], "layouts": { "LAYOUT_numpad_5x4": { "layout": [ diff --git a/keyboards/handwired/sick_pad/rules.mk b/keyboards/handwired/sick_pad/rules.mk index 1942356a8c..61bbba1c9e 100644 --- a/keyboards/handwired/sick_pad/rules.mk +++ b/keyboards/handwired/sick_pad/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F303 -BOARD = QMK_PROTON_C - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # @@ -17,4 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -LAYOUTS = numpad_5x4 diff --git a/keyboards/handwired/skakunm_dactyl/config.h b/keyboards/handwired/skakunm_dactyl/config.h index 1fb0cc6b2a..2e01a71d28 100644 --- a/keyboards/handwired/skakunm_dactyl/config.h +++ b/keyboards/handwired/skakunm_dactyl/config.h @@ -4,12 +4,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 8 -#define MATRIX_COLS 5 // wiring of each half #define MATRIX_COL_PINS { C6, D7, E6, B4, B5 } @@ -24,12 +18,6 @@ #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* serial.c configuration for split keyboard */ -#define SOFT_SERIAL_PIN D0 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/skakunm_dactyl/info.json b/keyboards/handwired/skakunm_dactyl/info.json index 2eed23d809..a38c564091 100644 --- a/keyboards/handwired/skakunm_dactyl/info.json +++ b/keyboards/handwired/skakunm_dactyl/info.json @@ -8,6 +8,11 @@ "pid": "0x3060", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT_3x5_5": { "layout": [ diff --git a/keyboards/handwired/skakunm_dactyl/rules.mk b/keyboards/handwired/skakunm_dactyl/rules.mk index bd53948797..7f1fc659cc 100644 --- a/keyboards/handwired/skakunm_dactyl/rules.mk +++ b/keyboards/handwired/skakunm_dactyl/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/slash/config.h b/keyboards/handwired/slash/config.h index f3c92e6dd2..ffa31f3c7a 100644 --- a/keyboards/handwired/slash/config.h +++ b/keyboards/handwired/slash/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 8 /* * Keyboard Matrix Assignments @@ -38,12 +33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/slash/info.json b/keyboards/handwired/slash/info.json index 3fd0f1918e..b272ff1ed2 100644 --- a/keyboards/handwired/slash/info.json +++ b/keyboards/handwired/slash/info.json @@ -8,6 +8,8 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/slash/rules.mk b/keyboards/handwired/slash/rules.mk index 53d114978f..c99c2847ce 100644 --- a/keyboards/handwired/slash/rules.mk +++ b/keyboards/handwired/slash/rules.mk @@ -1,12 +1,6 @@ -# MCU name -MCU = atmega32u4 - # Processor frequency F_CPU = 8000000 -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/snatchpad/config.h b/keyboards/handwired/snatchpad/config.h index 2d4f9ca2b4..97de836d04 100644 --- a/keyboards/handwired/snatchpad/config.h +++ b/keyboards/handwired/snatchpad/config.h @@ -3,11 +3,6 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 3 /* * Keyboard Matrix Assignments @@ -30,76 +25,11 @@ #define ENCODERS_PAD_A { D3, D0 } #define ENCODERS_PAD_B { D2, D1 } - - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -//#define LED_NUM_LOCK_PIN B0 -//#define LED_CAPS_LOCK_PIN B1 -//#define LED_SCROLL_LOCK_PIN B2 -//#define LED_COMPOSE_PIN B3 -//#define LED_KANA_PIN B4 - -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - -//#define RGB_DI_PIN E2 -//#ifdef RGB_DI_PIN -//# define RGBLED_NUM 16 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -//#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -115,7 +45,3 @@ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/snatchpad/info.json b/keyboards/handwired/snatchpad/info.json index 22840d7352..da0221f474 100644 --- a/keyboards/handwired/snatchpad/info.json +++ b/keyboards/handwired/snatchpad/info.json @@ -8,6 +8,8 @@ "pid": "0x7370", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/snatchpad/rules.mk b/keyboards/handwired/snatchpad/rules.mk index 7c73773c0d..74f5b93cb9 100644 --- a/keyboards/handwired/snatchpad/rules.mk +++ b/keyboards/handwired/snatchpad/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/sono1/config.h b/keyboards/handwired/sono1/config.h index f20b77b231..9f1a9ae244 100644 --- a/keyboards/handwired/sono1/config.h +++ b/keyboards/handwired/sono1/config.h @@ -17,22 +17,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 15 -#define MATRIX_COLS 8 /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 - /* mechanical locking support. NumLock key on the numpad uses Alps SKCL Lock switch */ #define LOCKING_SUPPORT_ENABLE #define LOCKING_RESYNC_ENABLE diff --git a/keyboards/handwired/sono1/stm32f103/config.h b/keyboards/handwired/sono1/stm32f103/config.h index 33563c3cf7..b961eaffd6 100644 --- a/keyboards/handwired/sono1/stm32f103/config.h +++ b/keyboards/handwired/sono1/stm32f103/config.h @@ -17,16 +17,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" #define MATRIX_ROW_PINS { A5, B3, A9, A10, B13, B14, B15, A8, B7, B8, B9, C13, A15, A0, A1 } #define MATRIX_COL_PINS { A4, A3, B11, B10, B1, B0, A7, A6 } - -#define LED_KANA_PIN A2 -#define LED_CAPS_LOCK_PIN B5 #define LED_CTRL_XFER_PIN B6 -#define LED_NUM_LOCK_PIN B4 #define LED_KB_LOCK_PIN B12 -#define LED_PIN_ON_STATE 0 - diff --git a/keyboards/handwired/sono1/stm32f103/info.json b/keyboards/handwired/sono1/stm32f103/info.json index 90ac25f360..b25392382a 100644 --- a/keyboards/handwired/sono1/stm32f103/info.json +++ b/keyboards/handwired/sono1/stm32f103/info.json @@ -1,5 +1,13 @@ { "usb": { "device_version": "0.0.1" - } + }, + "indicators": { + "caps_lock": "B5", + "num_lock": "B4", + "kana": "A2", + "on_state": 0 + }, + "processor": "STM32F103", + "bootloader": "stm32duino" } diff --git a/keyboards/handwired/sono1/stm32f103/rules.mk b/keyboards/handwired/sono1/stm32f103/rules.mk index 019b1130d9..a92b099328 100644 --- a/keyboards/handwired/sono1/stm32f103/rules.mk +++ b/keyboards/handwired/sono1/stm32f103/rules.mk @@ -1,8 +1,2 @@ -# MCU name -MCU = STM32F103 - -# Bootloader selection -BOOTLOADER = stm32duino - # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/handwired/sono1/t2pp/config.h b/keyboards/handwired/sono1/t2pp/config.h index 3ecf674050..15bea036a2 100644 --- a/keyboards/handwired/sono1/t2pp/config.h +++ b/keyboards/handwired/sono1/t2pp/config.h @@ -17,16 +17,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" #define MATRIX_ROW_PINS { F7, F6, F5, F4, F3, F2, F1, F0, D7, B7, D0, D1, D2, D3, D4 } #define MATRIX_COL_PINS { C6, C5, C4, C3, C2, C1, C0, E1 } - -#define LED_KANA_PIN D5 -#define LED_CAPS_LOCK_PIN B3 #define LED_CTRL_XFER_PIN B4 -#define LED_NUM_LOCK_PIN B2 #define LED_KB_LOCK_PIN B1 -#define LED_PIN_ON_STATE 0 - diff --git a/keyboards/handwired/sono1/t2pp/info.json b/keyboards/handwired/sono1/t2pp/info.json index e557e4d307..3e637c3e94 100644 --- a/keyboards/handwired/sono1/t2pp/info.json +++ b/keyboards/handwired/sono1/t2pp/info.json @@ -1,5 +1,13 @@ { "usb": { "device_version": "0.0.2" - } + }, + "indicators": { + "caps_lock": "B3", + "num_lock": "B2", + "kana": "D5", + "on_state": 0 + }, + "processor": "at90usb1286", + "bootloader": "halfkay" } diff --git a/keyboards/handwired/sono1/t2pp/rules.mk b/keyboards/handwired/sono1/t2pp/rules.mk index 149471682d..e69de29bb2 100644 --- a/keyboards/handwired/sono1/t2pp/rules.mk +++ b/keyboards/handwired/sono1/t2pp/rules.mk @@ -1,5 +0,0 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = halfkay diff --git a/keyboards/handwired/space_oddity/config.h b/keyboards/handwired/space_oddity/config.h index caea1cb3a5..708be5389d 100644 --- a/keyboards/handwired/space_oddity/config.h +++ b/keyboards/handwired/space_oddity/config.h @@ -1,6 +1,5 @@ #pragma once -#include "config_common.h" #define MOUSEKEY_INTERVAL 16 #define MOUSEKEY_DELAY 0 @@ -8,10 +7,6 @@ #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 12 - /* key matrix pins */ #define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3 } #define MATRIX_COL_PINS { B2, B6, B5, B4, E6, D7, C6, D4, D0, D1, D2, D3 } @@ -19,9 +14,6 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/space_oddity/info.json b/keyboards/handwired/space_oddity/info.json index 33d24c3905..e03c13c3e0 100644 --- a/keyboards/handwired/space_oddity/info.json +++ b/keyboards/handwired/space_oddity/info.json @@ -8,6 +8,8 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/space_oddity/keymaps/default/keymap.c b/keyboards/handwired/space_oddity/keymaps/default/keymap.c index 4e8ee5ddca..5b61482344 100644 --- a/keyboards/handwired/space_oddity/keymaps/default/keymap.c +++ b/keyboards/handwired/space_oddity/keymaps/default/keymap.c @@ -35,7 +35,7 @@ enum { }; // Tap dance actions - double tap for Caps Lock. -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { [SFT_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS), diff --git a/keyboards/handwired/space_oddity/rules.mk b/keyboards/handwired/space_oddity/rules.mk index 0b1ff1cd0a..8b3a3ef369 100644 --- a/keyboards/handwired/space_oddity/rules.mk +++ b/keyboards/handwired/space_oddity/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/split65/promicro/config.h b/keyboards/handwired/split65/promicro/config.h index 3284c5e0d3..7deab0a7db 100644 --- a/keyboards/handwired/split65/promicro/config.h +++ b/keyboards/handwired/split65/promicro/config.h @@ -16,11 +16,6 @@ #pragma once -#include "config_common.h" - -// Matrix Assignments -#define MATRIX_ROWS 10 //Rows are doubled-up -#define MATRIX_COLS 8 #define MATRIX_COL_PINS {F4, F5, F6, F7, B1, B3, B2, B6} #define MATRIX_ROW_PINS {D4, C6, D7, E6, B4} @@ -30,13 +25,8 @@ #define MATRIX_IO_DELAY 5 -// Split Keyboard specifics -#define SOFT_SERIAL_PIN D3 #define SELECT_SOFT_SERIAL_SPEED 1 -// Debounce to reduce unintended double-presses use 0 if not needed -#define DEBOUNCE 5 - // Feature diable options //#define NO_DEBUG //#define NO_PRINT diff --git a/keyboards/handwired/split65/promicro/info.json b/keyboards/handwired/split65/promicro/info.json new file mode 100644 index 0000000000..81738c4d47 --- /dev/null +++ b/keyboards/handwired/split65/promicro/info.json @@ -0,0 +1,7 @@ +{ + "split": { + "soft_serial_pin": "D3" + }, + "processor": "atmega32u4", + "bootloader": "caterina" +} diff --git a/keyboards/handwired/split65/promicro/rules.mk b/keyboards/handwired/split65/promicro/rules.mk index e47fa13115..3bc7f499ec 100644 --- a/keyboards/handwired/split65/promicro/rules.mk +++ b/keyboards/handwired/split65/promicro/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/split65/stm32/config.h b/keyboards/handwired/split65/stm32/config.h index 6c3d653d1d..483b897584 100644 --- a/keyboards/handwired/split65/stm32/config.h +++ b/keyboards/handwired/split65/stm32/config.h @@ -15,17 +15,12 @@ */ #pragma once -#include "config_common.h" // Audio #define AUDIO_PIN A5 #define AUDIO_PIN_ALT A4 #define AUDIO_PIN_ALT_AS_NEGATIVE -// Matrix Assignments -#define MATRIX_ROWS 10 //Rows are doubled-up -#define MATRIX_COLS 8 - #define MATRIX_COL_PINS {A2, A1, A0, B8, B13, B14, B15, B9} #define MATRIX_ROW_PINS {B5, B4, B3, B2, B1} @@ -34,16 +29,11 @@ #define MATRIX_IO_DELAY 5 -// Split Keyboard specifics -#define SOFT_SERIAL_PIN A9 #define SELECT_SOFT_SERIAL_SPEED 1 #define SERIAL_USART_DRIVER SD1 #define SERIAL_USART_TX_PAL_MODE 7 #define SERIAL_USART_TIMEOUT 100 -// Debounce to reduce unintended double-presses use 0 if not needed -#define DEBOUNCE 5 - // Feature diable options //#define NO_DEBUG //#define NO_PRINT diff --git a/keyboards/handwired/split65/stm32/info.json b/keyboards/handwired/split65/stm32/info.json new file mode 100644 index 0000000000..f497c14c01 --- /dev/null +++ b/keyboards/handwired/split65/stm32/info.json @@ -0,0 +1,8 @@ +{ + "split": { + "soft_serial_pin": "A9" + }, + "processor": "STM32F303", + "bootloader": "stm32-dfu", + "board": "QMK_PROTON_C" +} diff --git a/keyboards/handwired/split65/stm32/rules.mk b/keyboards/handwired/split65/stm32/rules.mk index 0c46074584..5033bd1e21 100644 --- a/keyboards/handwired/split65/stm32/rules.mk +++ b/keyboards/handwired/split65/stm32/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F303 -BOARD = QMK_PROTON_C - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/split89/config.h b/keyboards/handwired/split89/config.h index 55a2287e60..637326617c 100644 --- a/keyboards/handwired/split89/config.h +++ b/keyboards/handwired/split89/config.h @@ -16,7 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* * Keyboard Matrix Assignments @@ -29,13 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. * */ -/* key matrix size -ROWS = total count of rows for both sides - this is broken out accordingly in split.h -COLS = number of cols per side which curently needs to be equal so there are blank columns for the left side in the split89.h file - */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 10 - /* Left side matrix */ #define MATRIX_ROW_PINS { F6, F7, B1, B3, B2, B6 } #define MATRIX_COL_PINS { F5, F4, B5, B4, E6, D7, C6, D4, D2, D3 } @@ -49,75 +41,11 @@ COLS = number of cols per side which curently needs to be equal so there are bla /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* handedness */ -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -//#define LED_NUM_LOCK_PIN B0 -//#define LED_CAPS_LOCK_PIN B1 -//#define LED_SCROLL_LOCK_PIN B2 -//#define LED_COMPOSE_PIN B3 -//#define LED_KANA_PIN B4 - -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - -//#define RGB_DI_PIN E2 -//#ifdef RGB_DI_PIN -//# define RGBLED_NUM 16 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -//#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -133,7 +61,3 @@ COLS = number of cols per side which curently needs to be equal so there are bla //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/split89/info.json b/keyboards/handwired/split89/info.json index e4b98e458c..2cc68544a7 100644 --- a/keyboards/handwired/split89/info.json +++ b/keyboards/handwired/split89/info.json @@ -8,6 +8,11 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/split89/rules.mk b/keyboards/handwired/split89/rules.mk index 8f9772df22..8ea05b5f74 100644 --- a/keyboards/handwired/split89/rules.mk +++ b/keyboards/handwired/split89/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/splittest/bluepill/config.h b/keyboards/handwired/splittest/bluepill/config.h index b1315ee3c7..54b00b88a5 100644 --- a/keyboards/handwired/splittest/bluepill/config.h +++ b/keyboards/handwired/splittest/bluepill/config.h @@ -3,7 +3,6 @@ #pragma once -#include "config_common.h" // wiring of each half #define MATRIX_ROW_PINS { B10 } diff --git a/keyboards/handwired/splittest/bluepill/info.json b/keyboards/handwired/splittest/bluepill/info.json new file mode 100644 index 0000000000..cf993be247 --- /dev/null +++ b/keyboards/handwired/splittest/bluepill/info.json @@ -0,0 +1,4 @@ +{ + "processor": "STM32F103", + "bootloader": "stm32duino" +} diff --git a/keyboards/handwired/splittest/bluepill/rules.mk b/keyboards/handwired/splittest/bluepill/rules.mk index 019b1130d9..a92b099328 100644 --- a/keyboards/handwired/splittest/bluepill/rules.mk +++ b/keyboards/handwired/splittest/bluepill/rules.mk @@ -1,8 +1,2 @@ -# MCU name -MCU = STM32F103 - -# Bootloader selection -BOOTLOADER = stm32duino - # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/handwired/splittest/config.h b/keyboards/handwired/splittest/config.h index 7eaab91e91..af60e7e0a9 100644 --- a/keyboards/handwired/splittest/config.h +++ b/keyboards/handwired/splittest/config.h @@ -18,21 +18,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 2 -#define MATRIX_COLS 1 #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/splittest/promicro/config.h b/keyboards/handwired/splittest/promicro/config.h index de2414cb7b..45f005222f 100644 --- a/keyboards/handwired/splittest/promicro/config.h +++ b/keyboards/handwired/splittest/promicro/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" // use I2C on AVR #define USE_I2C @@ -25,7 +24,6 @@ #define MATRIX_ROW_PINS { B3 } #define MATRIX_COL_PINS { B6 } #define SPLIT_HAND_PIN F6 -#define SOFT_SERIAL_PIN D1 /* ws2812 RGB LED */ #define RGB_DI_PIN D3 diff --git a/keyboards/handwired/splittest/promicro/info.json b/keyboards/handwired/splittest/promicro/info.json new file mode 100644 index 0000000000..ecf716ff97 --- /dev/null +++ b/keyboards/handwired/splittest/promicro/info.json @@ -0,0 +1,7 @@ +{ + "split": { + "soft_serial_pin": "D1" + }, + "processor": "atmega32u4", + "bootloader": "caterina" +} diff --git a/keyboards/handwired/splittest/promicro/rules.mk b/keyboards/handwired/splittest/promicro/rules.mk index cf663a7ed6..e69de29bb2 100644 --- a/keyboards/handwired/splittest/promicro/rules.mk +++ b/keyboards/handwired/splittest/promicro/rules.mk @@ -1,5 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina diff --git a/keyboards/handwired/splittest/teensy_2/config.h b/keyboards/handwired/splittest/teensy_2/config.h index eadd42fb7c..7b77a5e36b 100644 --- a/keyboards/handwired/splittest/teensy_2/config.h +++ b/keyboards/handwired/splittest/teensy_2/config.h @@ -16,7 +16,6 @@ #pragma once -#include "config_common.h" // use I2C on AVR #define USE_I2C @@ -25,7 +24,6 @@ #define MATRIX_ROW_PINS { F5 } #define MATRIX_COL_PINS { F7 } #define SPLIT_HAND_PIN F0 -#define SOFT_SERIAL_PIN D1 /* ws2812 RGB LED */ #define RGB_DI_PIN D3 diff --git a/keyboards/handwired/splittest/teensy_2/info.json b/keyboards/handwired/splittest/teensy_2/info.json new file mode 100644 index 0000000000..a67cb4e2f2 --- /dev/null +++ b/keyboards/handwired/splittest/teensy_2/info.json @@ -0,0 +1,7 @@ +{ + "split": { + "soft_serial_pin": "D1" + }, + "processor": "atmega32u4", + "bootloader": "halfkay" +} diff --git a/keyboards/handwired/splittest/teensy_2/rules.mk b/keyboards/handwired/splittest/teensy_2/rules.mk index 320633f80f..e69de29bb2 100644 --- a/keyboards/handwired/splittest/teensy_2/rules.mk +++ b/keyboards/handwired/splittest/teensy_2/rules.mk @@ -1,5 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay diff --git a/keyboards/handwired/steamvan/rev1/config.h b/keyboards/handwired/steamvan/rev1/config.h index 342f1a02d2..a953888dc8 100644 --- a/keyboards/handwired/steamvan/rev1/config.h +++ b/keyboards/handwired/steamvan/rev1/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 /* ROWS: Top to bottom, COLS: Left to right */ @@ -31,9 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/steamvan/rev1/info.json b/keyboards/handwired/steamvan/rev1/info.json index e84a73ab8e..ddadbcb97c 100644 --- a/keyboards/handwired/steamvan/rev1/info.json +++ b/keyboards/handwired/steamvan/rev1/info.json @@ -8,6 +8,9 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "STM32F303", + "bootloader": "stm32-dfu", + "board": "QMK_PROTON_C", "layouts": { "LAYOUT_standard": { "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"|", "x":11, "y":0, "w":1.75}, {"label":"Caps Lock", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"\"", "x":11.25, "y":1, "w":1.5}, {"label":"Shift", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"?", "x":10.75, "y":2}, {"x":11.75, "y":2}, {"label":"Ctrl", "x":0, "y":3, "w":1.25}, {"label":"Win", "x":1.25, "y":3, "w":1.5}, {"label":"Alt", "x":2.75, "y":3, "w":1.25}, {"x":4, "y":3, "w":2.25}, {"x":6.25, "y":3, "w":2}, {"label":"Alt", "x":8.25, "y":3, "w":1.25}, {"label":"Win", "x":9.5, "y":3, "w":1.5}, {"label":"Menu", "x":11, "y":3, "w":1.75}] diff --git a/keyboards/handwired/steamvan/rev1/rules.mk b/keyboards/handwired/steamvan/rev1/rules.mk index 3d45b63d21..e6848a7b65 100644 --- a/keyboards/handwired/steamvan/rev1/rules.mk +++ b/keyboards/handwired/steamvan/rev1/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F303 -BOARD = QMK_PROTON_C - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Use SPI for RGB underglow: WS2812_DRIVER = spi diff --git a/keyboards/handwired/stef9998/split_5x7/config.h b/keyboards/handwired/stef9998/split_5x7/config.h deleted file mode 100644 index d04675e7db..0000000000 --- a/keyboards/handwired/stef9998/split_5x7/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/* -Copyright 2022 stef9998 - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h"
\ No newline at end of file diff --git a/keyboards/handwired/stef9998/split_5x7/info.json b/keyboards/handwired/stef9998/split_5x7/info.json index a1248b2d9e..75d151d5b6 100644 --- a/keyboards/handwired/stef9998/split_5x7/info.json +++ b/keyboards/handwired/stef9998/split_5x7/info.json @@ -8,6 +8,11 @@ "pid": "0x6063", "device_version": "1.0.0" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/stef9998/split_5x7/rev1/config.h b/keyboards/handwired/stef9998/split_5x7/rev1/config.h index 6308b1cf19..2957afc125 100644 --- a/keyboards/handwired/stef9998/split_5x7/rev1/config.h +++ b/keyboards/handwired/stef9998/split_5x7/rev1/config.h @@ -17,12 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 10 -#define MATRIX_COLS 7 // wiring of each half #define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 } @@ -34,13 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* serial.c configuration for split keyboard */ -#define SOFT_SERIAL_PIN D0 - - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/stef9998/split_5x7/rules.mk b/keyboards/handwired/stef9998/split_5x7/rules.mk index 01f4b93976..f74fc17545 100644 --- a/keyboards/handwired/stef9998/split_5x7/rules.mk +++ b/keyboards/handwired/stef9998/split_5x7/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/sticc14/config.h b/keyboards/handwired/sticc14/config.h index f8c3e2b50f..43a17c9e88 100644 --- a/keyboards/handwired/sticc14/config.h +++ b/keyboards/handwired/sticc14/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 3 /* * Keyboard Matrix Assignments @@ -39,68 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -116,7 +54,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/sticc14/info.json b/keyboards/handwired/sticc14/info.json index ab602839ac..194ac0eeb3 100644 --- a/keyboards/handwired/sticc14/info.json +++ b/keyboards/handwired/sticc14/info.json @@ -8,6 +8,8 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/sticc14/rules.mk b/keyboards/handwired/sticc14/rules.mk index eae129b29b..fce764c22d 100644 --- a/keyboards/handwired/sticc14/rules.mk +++ b/keyboards/handwired/sticc14/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/stream_cheap/2x3/config.h b/keyboards/handwired/stream_cheap/2x3/config.h index 8ae6ffb988..5f36081323 100644 --- a/keyboards/handwired/stream_cheap/2x3/config.h +++ b/keyboards/handwired/stream_cheap/2x3/config.h @@ -1,18 +1,5 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 3 - -/* define direct pins used */ -#define DIRECT_PINS { { D1,C6,B4}, { D0,D4,D7} } - - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/stream_cheap/2x3/info.json b/keyboards/handwired/stream_cheap/2x3/info.json index c16c853804..555d9540af 100644 --- a/keyboards/handwired/stream_cheap/2x3/info.json +++ b/keyboards/handwired/stream_cheap/2x3/info.json @@ -8,6 +8,15 @@ "pid": "0x1213", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D1", "C6", "B4"], + ["D0", "D4", "D7"] + ] + }, + "community_layouts": ["ortho_2x3"], "layouts": { "LAYOUT_ortho_2x3": { "layout": [ diff --git a/keyboards/handwired/stream_cheap/2x3/rules.mk b/keyboards/handwired/stream_cheap/2x3/rules.mk index 6ed1b0e6f0..3b6a1809db 100644 --- a/keyboards/handwired/stream_cheap/2x3/rules.mk +++ b/keyboards/handwired/stream_cheap/2x3/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = ortho_2x3 diff --git a/keyboards/handwired/stream_cheap/2x4/config.h b/keyboards/handwired/stream_cheap/2x4/config.h index 41e30a6dc1..5f36081323 100644 --- a/keyboards/handwired/stream_cheap/2x4/config.h +++ b/keyboards/handwired/stream_cheap/2x4/config.h @@ -1,20 +1,5 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 4 - -/* define direct pins used */ -#define DIRECT_PINS \ - { \ - {D1, D0, D4, C6}, { D7, E6, B4, B5 } \ - } - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/stream_cheap/2x4/info.json b/keyboards/handwired/stream_cheap/2x4/info.json index 441a68caaa..d298a30c14 100644 --- a/keyboards/handwired/stream_cheap/2x4/info.json +++ b/keyboards/handwired/stream_cheap/2x4/info.json @@ -8,6 +8,14 @@ "pid": "0x1214", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D1", "D0", "D4", "C6"], + ["D7", "E6", "B4", "B5"] + ] + }, "layouts": { "LAYOUT_ortho_2x4": { "layout": [ diff --git a/keyboards/handwired/stream_cheap/2x4/rules.mk b/keyboards/handwired/stream_cheap/2x4/rules.mk index 6dac16c3e4..3ced86d55c 100644 --- a/keyboards/handwired/stream_cheap/2x4/rules.mk +++ b/keyboards/handwired/stream_cheap/2x4/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/stream_cheap/2x5/config.h b/keyboards/handwired/stream_cheap/2x5/config.h index 45694ed822..5f36081323 100644 --- a/keyboards/handwired/stream_cheap/2x5/config.h +++ b/keyboards/handwired/stream_cheap/2x5/config.h @@ -1,17 +1,5 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 2 -#define MATRIX_COLS 5 - -/* define direct pins used */ -#define DIRECT_PINS { { D1,C6,B4,B5,B2}, { D0,D4,D7,E6,B6} } - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/stream_cheap/2x5/info.json b/keyboards/handwired/stream_cheap/2x5/info.json index 57088d112b..3a81177f31 100644 --- a/keyboards/handwired/stream_cheap/2x5/info.json +++ b/keyboards/handwired/stream_cheap/2x5/info.json @@ -8,6 +8,14 @@ "pid": "0x1215", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", + "matrix_pins": { + "direct": [ + ["D1", "C6", "B4", "B5", "B2"], + ["D0", "D4", "D7", "E6", "B6"] + ] + }, "layouts": { "LAYOUT_ortho_2x5": { "layout": [ diff --git a/keyboards/handwired/stream_cheap/2x5/rules.mk b/keyboards/handwired/stream_cheap/2x5/rules.mk index 7dae3a8423..3b6a1809db 100644 --- a/keyboards/handwired/stream_cheap/2x5/rules.mk +++ b/keyboards/handwired/stream_cheap/2x5/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/swiftrax/astro65/config.h b/keyboards/handwired/swiftrax/astro65/config.h index 39e1004233..f379fab490 100644 --- a/keyboards/handwired/swiftrax/astro65/config.h +++ b/keyboards/handwired/swiftrax/astro65/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 // ROWS: Top to bottom, COLS: Left to right @@ -32,9 +27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 diff --git a/keyboards/handwired/swiftrax/astro65/info.json b/keyboards/handwired/swiftrax/astro65/info.json index d577cfafa0..fef1bd6999 100644 --- a/keyboards/handwired/swiftrax/astro65/info.json +++ b/keyboards/handwired/swiftrax/astro65/info.json @@ -8,6 +8,9 @@ "pid": "0xEAEF", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "community_layouts": ["65_ansi_blocker_split_bs"], "layouts": { "LAYOUT_65_ansi_blocker_split_bs": { "layout": [{"label":"0,0", "x":0, "y":0}, {"label":"0,1", "x":1, "y":0}, {"label":"0,2", "x":2, "y":0}, {"label":"0,3", "x":3, "y":0}, {"label":"0,4", "x":4, "y":0}, {"label":"0,5", "x":5, "y":0}, {"label":"0,6", "x":6, "y":0}, {"label":"0,7", "x":7, "y":0}, {"label":"0,8", "x":8, "y":0}, {"label":"0,9", "x":9, "y":0}, {"label":"0,10", "x":10, "y":0}, {"label":"0,11", "x":11, "y":0}, {"label":"0,12", "x":12, "y":0}, {"label":"0,13", "x":13, "y":0}, {"label":"0,14", "x":14, "y":0}, {"label":"0,15", "x":15, "y":0}, {"label":"1,0", "x":0, "y":1, "w":1.5}, {"label":"1,1", "x":1.5, "y":1}, {"label":"1,2", "x":2.5, "y":1}, {"label":"1,3", "x":3.5, "y":1}, {"label":"1,4", "x":4.5, "y":1}, {"label":"1,5", "x":5.5, "y":1}, {"label":"1,6", "x":6.5, "y":1}, {"label":"1,7", "x":7.5, "y":1}, {"label":"1,8", "x":8.5, "y":1}, {"label":"1,9", "x":9.5, "y":1}, {"label":"1,10", "x":10.5, "y":1}, {"label":"1,11", "x":11.5, "y":1}, {"label":"1,12", "x":12.5, "y":1}, {"label":"1,13", "x":13.5, "y":1, "w":1.5}, {"label":"1,15", "x":15, "y":1}, {"label":"2,0", "x":0, "y":2, "w":1.75}, {"label":"2,1", "x":1.75, "y":2}, {"label":"2,2", "x":2.75, "y":2}, {"label":"2,3", "x":3.75, "y":2}, {"label":"2,4", "x":4.75, "y":2}, {"label":"2,5", "x":5.75, "y":2}, {"label":"2,6", "x":6.75, "y":2}, {"label":"2,7", "x":7.75, "y":2}, {"label":"2,8", "x":8.75, "y":2}, {"label":"2,9", "x":9.75, "y":2}, {"label":"2,10", "x":10.75, "y":2}, {"label":"2,11", "x":11.75, "y":2}, {"label":"2,12", "x":12.75, "y":2, "w":2.25}, {"label":"2,15", "x":15, "y":2}, {"label":"3,0", "x":0, "y":3, "w":2.25}, {"label":"3,2", "x":2.25, "y":3}, {"label":"3,3", "x":3.25, "y":3}, {"label":"3,4", "x":4.25, "y":3}, {"label":"3,5", "x":5.25, "y":3}, {"label":"3,6", "x":6.25, "y":3}, {"label":"3,7", "x":7.25, "y":3}, {"label":"3,8", "x":8.25, "y":3}, {"label":"3,9", "x":9.25, "y":3}, {"label":"3,10", "x":10.25, "y":3}, {"label":"3,11", "x":11.25, "y":3}, {"label":"3,12", "x":12.25, "y":3, "w":1.75}, {"label":"3,14", "x":14, "y":3}, {"label":"3,15", "x":15, "y":3}, {"label":"4,0", "x":0, "y":4, "w":1.25}, {"label":"4,1", "x":1.25, "y":4, "w":1.25}, {"label":"4,2", "x":2.5, "y":4, "w":1.25}, {"label":"4,6", "x":3.75, "y":4, "w":6.25}, {"label":"4,10", "x":10, "y":4, "w":1.25}, {"label":"4,11", "x":11.25, "y":4, "w":1.25}, {"label":"4,12", "x":13, "y":4}, {"label":"4,14", "x":14, "y":4}, {"label":"4,15", "x":15, "y":4}] diff --git a/keyboards/handwired/swiftrax/astro65/rules.mk b/keyboards/handwired/swiftrax/astro65/rules.mk index 6cdc668811..ab2c49da70 100644 --- a/keyboards/handwired/swiftrax/astro65/rules.mk +++ b/keyboards/handwired/swiftrax/astro65/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = 65_ansi_blocker_split_bs diff --git a/keyboards/handwired/swiftrax/bebol/config.h b/keyboards/handwired/swiftrax/bebol/config.h index 0d35bd1abc..057d1527df 100644 --- a/keyboards/handwired/swiftrax/bebol/config.h +++ b/keyboards/handwired/swiftrax/bebol/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 // ROWS: Top to bottom, COLS: Left to right @@ -30,9 +25,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 diff --git a/keyboards/handwired/swiftrax/bebol/info.json b/keyboards/handwired/swiftrax/bebol/info.json index c25284ac9f..29c7f21323 100644 --- a/keyboards/handwired/swiftrax/bebol/info.json +++ b/keyboards/handwired/swiftrax/bebol/info.json @@ -8,6 +8,8 @@ "pid": "0xEAC4", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] diff --git a/keyboards/handwired/swiftrax/bebol/rules.mk b/keyboards/handwired/swiftrax/bebol/rules.mk index 1275531ef6..ab2c49da70 100644 --- a/keyboards/handwired/swiftrax/bebol/rules.mk +++ b/keyboards/handwired/swiftrax/bebol/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/swiftrax/beegboy/config.h b/keyboards/handwired/swiftrax/beegboy/config.h index a6a6e12f1b..282a766e55 100644 --- a/keyboards/handwired/swiftrax/beegboy/config.h +++ b/keyboards/handwired/swiftrax/beegboy/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 9 // ROWS: Top to bottom, COLS: Left to right @@ -32,11 +27,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION ROW2COL -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /*EEPROM for via*/ #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/handwired/swiftrax/beegboy/info.json b/keyboards/handwired/swiftrax/beegboy/info.json index 7e4d05a198..a52b6e37e7 100644 --- a/keyboards/handwired/swiftrax/beegboy/info.json +++ b/keyboards/handwired/swiftrax/beegboy/info.json @@ -8,6 +8,8 @@ "pid": "0xEAC5", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/swiftrax/beegboy/rules.mk b/keyboards/handwired/swiftrax/beegboy/rules.mk index d143924b88..da25f7f3dc 100644 --- a/keyboards/handwired/swiftrax/beegboy/rules.mk +++ b/keyboards/handwired/swiftrax/beegboy/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/swiftrax/bumblebee/config.h b/keyboards/handwired/swiftrax/bumblebee/config.h index 192d1914ff..f18b0fab89 100644 --- a/keyboards/handwired/swiftrax/bumblebee/config.h +++ b/keyboards/handwired/swiftrax/bumblebee/config.h @@ -25,9 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION ROW2COL -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - /* Encoder */ #define ENCODERS_PAD_A { C6 } #define ENCODERS_PAD_B { B6 } diff --git a/keyboards/handwired/swiftrax/bumblebee/info.json b/keyboards/handwired/swiftrax/bumblebee/info.json index c210e75c14..887fc697af 100644 --- a/keyboards/handwired/swiftrax/bumblebee/info.json +++ b/keyboards/handwired/swiftrax/bumblebee/info.json @@ -8,6 +8,8 @@ "pid": "0xE881", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [{"label":"0,0", "x":0, "y":0}, {"label":"1,0", "x":1, "y":0, "w":1.5}, {"label":"0,1", "x":2.5, "y":0}, {"label":"1,1", "x":3.5, "y":0}, {"label":"0,2", "x":4.5, "y":0}, {"label":"1,2", "x":5.5, "y":0}, {"label":"0,3", "x":6.5, "y":0}, {"label":"1,3", "x":7.5, "y":0}, {"label":"0,4", "x":8.5, "y":0}, {"label":"1,4", "x":9.5, "y":0}, {"label":"0,5", "x":10.5, "y":0}, {"label":"1,5", "x":11.5, "y":0}, {"label":"0,6", "x":12.5, "y":0}, {"label":"1,6", "x":13.5, "y":0}, {"label":"0,7", "x":14.5, "y":0, "w":1.5}, {"label":"1,7", "x":16, "y":0}, {"label":"2,0", "x":0, "y":1}, {"label":"3,0", "x":1, "y":1, "w":1.75}, {"label":"2,1", "x":2.75, "y":1}, {"label":"3,1", "x":3.75, "y":1}, {"label":"2,2", "x":4.75, "y":1}, {"label":"3,2", "x":5.75, "y":1}, {"label":"2,3", "x":6.75, "y":1}, {"label":"3,3", "x":7.75, "y":1}, {"label":"2,4", "x":8.75, "y":1}, {"label":"3,4", "x":9.75, "y":1}, {"label":"2,5", "x":10.75, "y":1}, {"label":"3,5", "x":11.75, "y":1}, {"label":"2,6", "x":12.75, "y":1}, {"label":"3,6", "x":13.75, "y":1, "w":2.25}, {"label":"2,7", "x":16, "y":1}, {"label":"4,0", "x":0, "y":2}, {"label":"5,0", "x":1, "y":2, "w":2.25}, {"label":"4,1", "x":3.25, "y":2}, {"label":"5,1", "x":4.25, "y":2}, {"label":"4,2", "x":5.25, "y":2}, {"label":"5,2", "x":6.25, "y":2}, {"label":"4,3", "x":7.25, "y":2}, {"label":"5,3", "x":8.25, "y":2}, {"label":"4,4", "x":9.25, "y":2}, {"label":"5,4", "x":10.25, "y":2}, {"label":"4,5", "x":11.25, "y":2}, {"label":"5,5", "x":12.25, "y":2}, {"label":"4,6", "x":13.25, "y":2, "w":1.75}, {"label":"5,6", "x":15, "y":2}, {"label":"4,7", "x":16, "y":2}, {"label":"6,0", "x":0, "y":3}, {"label":"7,0", "x":1, "y":3, "w":1.5}, {"label":"6,2", "x":3.88, "y":3, "w":1.5}, {"label":"7,2", "x":5.38, "y":3, "w":2.75}, {"label":"6,3", "x":8.13, "y":3}, {"label":"7,4", "x":9.13, "y":3, "w":2}, {"label":"6,5", "x":11.13, "y":3, "w":1.5}, {"label":"6,6", "x":14, "y":3}, {"label":"7,6", "x":15, "y":3}, {"label":"6,7", "x":16, "y":3}] diff --git a/keyboards/handwired/swiftrax/bumblebee/rules.mk b/keyboards/handwired/swiftrax/bumblebee/rules.mk index e0590e039a..0ca8090ba8 100644 --- a/keyboards/handwired/swiftrax/bumblebee/rules.mk +++ b/keyboards/handwired/swiftrax/bumblebee/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/swiftrax/cowfish/config.h b/keyboards/handwired/swiftrax/cowfish/config.h index c3e13a27fe..8a947bbea4 100644 --- a/keyboards/handwired/swiftrax/cowfish/config.h +++ b/keyboards/handwired/swiftrax/cowfish/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 18 // ROWS: Top to bottom, COLS: Left to right @@ -31,11 +26,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /*EEPROM for via*/ #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/handwired/swiftrax/cowfish/info.json b/keyboards/handwired/swiftrax/cowfish/info.json index 0b1833d9d1..4de9d07292 100644 --- a/keyboards/handwired/swiftrax/cowfish/info.json +++ b/keyboards/handwired/swiftrax/cowfish/info.json @@ -8,6 +8,8 @@ "pid": "0xEB53", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_tkl_f13_ansi": { "layout": [ diff --git a/keyboards/handwired/swiftrax/cowfish/rules.mk b/keyboards/handwired/swiftrax/cowfish/rules.mk index a61e60c8a4..6fe874e748 100644 --- a/keyboards/handwired/swiftrax/cowfish/rules.mk +++ b/keyboards/handwired/swiftrax/cowfish/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/swiftrax/digicarp65/config.h b/keyboards/handwired/swiftrax/digicarp65/config.h index d5336ec447..6618b9fa83 100644 --- a/keyboards/handwired/swiftrax/digicarp65/config.h +++ b/keyboards/handwired/swiftrax/digicarp65/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 // ROWS: Top to bottom, COLS: Left to right @@ -31,11 +26,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - #define ENCODERS_PAD_A { B3 } #define ENCODERS_PAD_B { B7 } diff --git a/keyboards/handwired/swiftrax/digicarp65/info.json b/keyboards/handwired/swiftrax/digicarp65/info.json index 73c2cf3415..aba6fbd54d 100644 --- a/keyboards/handwired/swiftrax/digicarp65/info.json +++ b/keyboards/handwired/swiftrax/digicarp65/info.json @@ -8,6 +8,9 @@ "pid": "0xE7F1", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "community_layouts": ["65_ansi", "65_ansi_split_bs", "65_iso", "65_iso_split_bs"], "layouts": { "LAYOUT_65_ansi": { "layout": [ diff --git a/keyboards/handwired/swiftrax/digicarp65/readme.md b/keyboards/handwired/swiftrax/digicarp65/readme.md index 34e0c0b755..a10c1b567a 100644 --- a/keyboards/handwired/swiftrax/digicarp65/readme.md +++ b/keyboards/handwired/swiftrax/digicarp65/readme.md @@ -17,5 +17,5 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to Enter the bootloader in 3 ways: * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key)and plug in the keyboard -* **Physical reset button**: Briefly short the pad on the back of the PCB labeled QK_BOOT +* **Physical reset button**: Briefly short the pad on the back of the PCB labeled `RESET` * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available diff --git a/keyboards/handwired/swiftrax/digicarp65/rules.mk b/keyboards/handwired/swiftrax/digicarp65/rules.mk index 7a15812bc8..21a966bffa 100644 --- a/keyboards/handwired/swiftrax/digicarp65/rules.mk +++ b/keyboards/handwired/swiftrax/digicarp65/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -17,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Rotary Encoder - -LAYOUTS = 65_ansi 65_ansi_split_bs 65_iso 65_iso_split_bs diff --git a/keyboards/handwired/swiftrax/digicarpice/config.h b/keyboards/handwired/swiftrax/digicarpice/config.h index 5ec256abb8..18f75ffe69 100644 --- a/keyboards/handwired/swiftrax/digicarpice/config.h +++ b/keyboards/handwired/swiftrax/digicarpice/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 // ROWS: Top to bottom, COLS: Left to right @@ -30,9 +25,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 diff --git a/keyboards/handwired/swiftrax/digicarpice/info.json b/keyboards/handwired/swiftrax/digicarpice/info.json index bbb62b101f..f311c9606d 100644 --- a/keyboards/handwired/swiftrax/digicarpice/info.json +++ b/keyboards/handwired/swiftrax/digicarpice/info.json @@ -8,6 +8,8 @@ "pid": "0xE79A", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_unified_bs": { "layout": [ diff --git a/keyboards/handwired/swiftrax/digicarpice/rules.mk b/keyboards/handwired/swiftrax/digicarpice/rules.mk index 1275531ef6..ab2c49da70 100644 --- a/keyboards/handwired/swiftrax/digicarpice/rules.mk +++ b/keyboards/handwired/swiftrax/digicarpice/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/swiftrax/equator/config.h b/keyboards/handwired/swiftrax/equator/config.h index fe3af92e45..d5df0d1942 100644 --- a/keyboards/handwired/swiftrax/equator/config.h +++ b/keyboards/handwired/swiftrax/equator/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 // ROWS: Top to bottom, COLS: Left to right @@ -30,9 +25,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 diff --git a/keyboards/handwired/swiftrax/equator/info.json b/keyboards/handwired/swiftrax/equator/info.json index e648e452c7..0e58b5569c 100644 --- a/keyboards/handwired/swiftrax/equator/info.json +++ b/keyboards/handwired/swiftrax/equator/info.json @@ -8,6 +8,8 @@ "pid": "0xE984", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_unified_bs_rshift": { "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":8.5, "y":0}, {"label":"*", "x":9.5, "y":0}, {"label":"(", "x":10.5, "y":0}, {"label":")", "x":11.5, "y":0}, {"label":"_", "x":12.5, "y":0}, {"label":"+", "x":13.5, "y":0}, {"label":"Backspace", "x":14.5, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":8, "y":1}, {"label":"U", "x":9, "y":1}, {"label":"I", "x":10, "y":1}, {"label":"O", "x":11, "y":1}, {"label":"P", "x":12, "y":1}, {"label":"{", "x":13, "y":1}, {"label":"}", "x":14, "y":1}, {"label":"|", "x":15, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":8.25, "y":2}, {"label":"J", "x":9.25, "y":2}, {"label":"K", "x":10.25, "y":2}, {"label":"L", "x":11.25, "y":2}, {"label":":", "x":12.25, "y":2}, {"label":"\"", "x":13.25, "y":2}, {"label":"Enter", "x":14.25, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"B", "x":7.75, "y":3}, {"label":"N", "x":8.75, "y":3}, {"label":"M", "x":9.75, "y":3}, {"label":"<", "x":10.75, "y":3}, {"label":">", "x":11.75, "y":3}, {"label":"?", "x":12.75, "y":3}, {"label":"Shift", "x":13.75, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":3.75, "y":4, "w":1.25}, {"x":5, "y":4, "w":2.25}, {"x":7.75, "y":4, "w":2.75}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":12.75, "y":4, "w":1.25}, {"label":"Menu", "x":14, "y":4, "w":1.25}, {"label":"Ctrl", "x":15.25, "y":4, "w":1.25}] diff --git a/keyboards/handwired/swiftrax/equator/rules.mk b/keyboards/handwired/swiftrax/equator/rules.mk index 1275531ef6..ab2c49da70 100644 --- a/keyboards/handwired/swiftrax/equator/rules.mk +++ b/keyboards/handwired/swiftrax/equator/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/swiftrax/glacier/config.h b/keyboards/handwired/swiftrax/glacier/config.h index 8d12cc6f60..b83d4cc943 100644 --- a/keyboards/handwired/swiftrax/glacier/config.h +++ b/keyboards/handwired/swiftrax/glacier/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 10 // ROWS: Top to bottom, COLS: Left to right @@ -31,12 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION ROW2COL -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /*EEPROM for via*/ #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/handwired/swiftrax/glacier/info.json b/keyboards/handwired/swiftrax/glacier/info.json index 8e27f9cc44..dc3bae097c 100644 --- a/keyboards/handwired/swiftrax/glacier/info.json +++ b/keyboards/handwired/swiftrax/glacier/info.json @@ -8,6 +8,8 @@ "pid": "0xE890", "device_version": "0.0.1" }, + "processor": "at90usb1286", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [{"label":"0,0", "x":0, "y":0}, {"label":"1,0", "x":1.25, "y":0}, {"label":"0,1", "x":2.25, "y":0}, {"label":"1,1", "x":3.25, "y":0}, {"label":"0,2", "x":4.25, "y":0}, {"label":"1,2", "x":5.5, "y":0}, {"label":"0,3", "x":6.5, "y":0}, {"label":"1,3", "x":7.5, "y":0}, {"label":"0,4", "x":8.5, "y":0}, {"label":"1,4", "x":9.75, "y":0}, {"label":"0,5", "x":10.75, "y":0}, {"label":"1,5", "x":11.75, "y":0}, {"label":"0,6", "x":12.75, "y":0}, {"label":"1,6", "x":14, "y":0}, {"label":"0,7", "x":15.25, "y":0}, {"label":"1,7", "x":16.5, "y":0}, {"label":"0,8", "x":17.5, "y":0}, {"label":"1,8", "x":18.5, "y":0}, {"label":"0,9", "x":19.5, "y":0}, {"label":"2,0", "x":0, "y":1.25}, {"label":"3,0", "x":1, "y":1.25}, {"label":"2,1", "x":2, "y":1.25}, {"label":"3,1", "x":3, "y":1.25}, {"label":"2,2", "x":4, "y":1.25}, {"label":"3,2", "x":5, "y":1.25}, {"label":"2,3", "x":6, "y":1.25}, {"label":"3,3", "x":7, "y":1.25}, {"label":"2,4", "x":8, "y":1.25}, {"label":"3,4", "x":9, "y":1.25}, {"label":"2,5", "x":10, "y":1.25}, {"label":"3,5", "x":11, "y":1.25}, {"label":"2,6", "x":12, "y":1.25}, {"label":"3,6", "x":13, "y":1.25}, {"label":"7,8", "x":14, "y":1.25}, {"label":"2,7", "x":15.25, "y":1.25}, {"label":"3,7", "x":16.5, "y":1.25}, {"label":"2,8", "x":17.5, "y":1.25}, {"label":"3,8", "x":18.5, "y":1.25}, {"label":"2,9", "x":19.5, "y":1.25}, {"label":"4,0", "x":0, "y":2.25, "w":1.5}, {"label":"5,0", "x":1.5, "y":2.25}, {"label":"4,1", "x":2.5, "y":2.25}, {"label":"5,1", "x":3.5, "y":2.25}, {"label":"4,2", "x":4.5, "y":2.25}, {"label":"5,2", "x":5.5, "y":2.25}, {"label":"4,3", "x":6.5, "y":2.25}, {"label":"5,3", "x":7.5, "y":2.25}, {"label":"4,4", "x":8.5, "y":2.25}, {"label":"5,4", "x":9.5, "y":2.25}, {"label":"4,5", "x":10.5, "y":2.25}, {"label":"5,5", "x":11.5, "y":2.25}, {"label":"4,6", "x":12.5, "y":2.25}, {"label":"5,6", "x":13.5, "y":2.25, "w":1.5}, {"label":"4,7", "x":15.25, "y":2.25}, {"label":"5,7", "x":16.5, "y":2.25}, {"label":"4,8", "x":17.5, "y":2.25}, {"label":"5,8", "x":18.5, "y":2.25}, {"label":"4,9", "x":19.5, "y":2.25, "h":2}, {"label":"6,0", "x":0, "y":3.25, "w":1.75}, {"label":"7,0", "x":1.75, "y":3.25}, {"label":"6,1", "x":2.75, "y":3.25}, {"label":"7,1", "x":3.75, "y":3.25}, {"label":"6,2", "x":4.75, "y":3.25}, {"label":"7,2", "x":5.75, "y":3.25}, {"label":"6,3", "x":6.75, "y":3.25}, {"label":"7,3", "x":7.75, "y":3.25}, {"label":"6,4", "x":8.75, "y":3.25}, {"label":"7,4", "x":9.75, "y":3.25}, {"label":"6,5", "x":10.75, "y":3.25}, {"label":"7,5", "x":11.75, "y":3.25}, {"label":"6,6", "x":12.75, "y":3.25, "w":2.25}, {"label":"6,7", "x":16.5, "y":3.25}, {"label":"7,7", "x":17.5, "y":3.25}, {"label":"6,8", "x":18.5, "y":3.25}, {"label":"8,0", "x":0, "y":4.25, "w":2.25}, {"label":"9,0", "x":2.25, "y":4.25}, {"label":"8,1", "x":3.25, "y":4.25}, {"label":"9,1", "x":4.25, "y":4.25}, {"label":"8,2", "x":5.25, "y":4.25}, {"label":"9,2", "x":6.25, "y":4.25}, {"label":"8,3", "x":7.25, "y":4.25}, {"label":"9,3", "x":8.25, "y":4.25}, {"label":"8,4", "x":9.25, "y":4.25}, {"label":"9,4", "x":10.25, "y":4.25}, {"label":"8,5", "x":11.25, "y":4.25}, {"label":"9,5", "x":12.25, "y":4.25, "w":1.75}, {"label":"9,6", "x":16.5, "y":4.25}, {"label":"8,7", "x":17.5, "y":4.25}, {"label":"9,7", "x":18.5, "y":4.25}, {"label":"8,8", "x":19.5, "y":4.25, "h":2}, {"label":"8,6", "x":14.25, "y":4.5}, {"label":"10,0", "x":0, "y":5.25, "w":1.25}, {"label":"11,0", "x":1.25, "y":5.25, "w":1.25}, {"label":"10,1", "x":2.5, "y":5.25, "w":1.25}, {"label":"11,3", "x":3.75, "y":5.25, "w":6.25}, {"label":"10,4", "x":10, "y":5.25, "w":1.5}, {"label":"11,4", "x":11.5, "y":5.25, "w":1.5}, {"label":"11,6", "x":16.5, "y":5.25, "w":2}, {"label":"10,7", "x":18.5, "y":5.25}, {"label":"10,5", "x":13.25, "y":5.5}, {"label":"11,5", "x":14.25, "y":5.5}, {"label":"10,6", "x":15.25, "y":5.5}] diff --git a/keyboards/handwired/swiftrax/glacier/rules.mk b/keyboards/handwired/swiftrax/glacier/rules.mk index b2d6d9e43c..9be7a1985b 100644 --- a/keyboards/handwired/swiftrax/glacier/rules.mk +++ b/keyboards/handwired/swiftrax/glacier/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/swiftrax/joypad/config.h b/keyboards/handwired/swiftrax/joypad/config.h index 8aca892618..45d0d0bb70 100644 --- a/keyboards/handwired/swiftrax/joypad/config.h +++ b/keyboards/handwired/swiftrax/joypad/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 4 // ROWS: Top to bottom, COLS: Left to right @@ -34,12 +29,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /*EEPROM for via*/ #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/handwired/swiftrax/joypad/info.json b/keyboards/handwired/swiftrax/joypad/info.json index 5916bb705d..9b3f094e85 100644 --- a/keyboards/handwired/swiftrax/joypad/info.json +++ b/keyboards/handwired/swiftrax/joypad/info.json @@ -8,6 +8,8 @@ "pid": "0xEA68", "device_version": "0.0.1" }, + "processor": "atmega32u2", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_ortho_6x4": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":0, "y":2.25}, {"x":1, "y":2.25}, {"x":2, "y":2.25}, {"x":3, "y":2.25}, {"x":0, "y":3.25}, {"x":1, "y":3.25}, {"x":2, "y":3.25}, {"x":3, "y":3.25}, {"x":0, "y":4.25}, {"x":1, "y":4.25}, {"x":2, "y":4.25}, {"x":3, "y":4.25}, {"x":0, "y":5.25}, {"x":1, "y":5.25}, {"x":2, "y":5.25}, {"x":3, "y":5.25}] diff --git a/keyboards/handwired/swiftrax/joypad/rules.mk b/keyboards/handwired/swiftrax/joypad/rules.mk index 451ec62f44..deedc37998 100644 --- a/keyboards/handwired/swiftrax/joypad/rules.mk +++ b/keyboards/handwired/swiftrax/joypad/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u2 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/swiftrax/koalafications/config.h b/keyboards/handwired/swiftrax/koalafications/config.h index 05e30ec982..442b53a9ba 100644 --- a/keyboards/handwired/swiftrax/koalafications/config.h +++ b/keyboards/handwired/swiftrax/koalafications/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 15 // ROWS: Top to bottom, COLS: Left to right @@ -31,11 +26,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /*EEPROM for via*/ #define DYNAMIC_KEYMAP_LAYER_COUNT 3
\ No newline at end of file diff --git a/keyboards/handwired/swiftrax/koalafications/info.json b/keyboards/handwired/swiftrax/koalafications/info.json index 35a8f73e39..dccea0b2b8 100644 --- a/keyboards/handwired/swiftrax/koalafications/info.json +++ b/keyboards/handwired/swiftrax/koalafications/info.json @@ -8,6 +8,8 @@ "pid": "0xEA44", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [{"label":"0,0", "x":0, "y":0}, {"label":"0,1", "x":1.25, "y":0}, {"label":"0,2", "x":2.25, "y":0}, {"label":"0,3", "x":3.25, "y":0}, {"label":"0,4", "x":4.25, "y":0}, {"label":"0,5", "x":5.5, "y":0}, {"label":"0,6", "x":6.5, "y":0}, {"label":"0,7", "x":7.5, "y":0}, {"label":"0,8", "x":8.5, "y":0}, {"label":"0,9", "x":9.75, "y":0}, {"label":"0,A", "x":10.75, "y":0}, {"label":"0,B", "x":11.75, "y":0}, {"label":"0,C", "x":12.75, "y":0}, {"label":"1,0", "x":0, "y":1.25}, {"label":"1,1", "x":1, "y":1.25}, {"label":"1,2", "x":2, "y":1.25}, {"label":"1,3", "x":3, "y":1.25}, {"label":"1,4", "x":4, "y":1.25}, {"label":"1,5", "x":5, "y":1.25}, {"label":"1,6", "x":6, "y":1.25}, {"label":"1,7", "x":7, "y":1.25}, {"label":"1,8", "x":8, "y":1.25}, {"label":"1,9", "x":9, "y":1.25}, {"label":"1,A", "x":10, "y":1.25}, {"label":"1,B", "x":11, "y":1.25}, {"label":"1,C", "x":12, "y":1.25}, {"label":"1,D", "x":13, "y":1.25}, {"label":"3,D", "x":14, "y":1.25}, {"label":"1,E", "x":15, "y":1.25}, {"label":"2,0", "x":0, "y":2.25, "w":1.5}, {"label":"2,1", "x":1.5, "y":2.25}, {"label":"2,2", "x":2.5, "y":2.25}, {"label":"2,3", "x":3.5, "y":2.25}, {"label":"2,4", "x":4.5, "y":2.25}, {"label":"2,5", "x":5.5, "y":2.25}, {"label":"2,6", "x":6.5, "y":2.25}, {"label":"2,7", "x":7.5, "y":2.25}, {"label":"2,8", "x":8.5, "y":2.25}, {"label":"2,9", "x":9.5, "y":2.25}, {"label":"2,A", "x":10.5, "y":2.25}, {"label":"2,B", "x":11.5, "y":2.25}, {"label":"2,C", "x":12.5, "y":2.25}, {"label":"2,D", "x":13.5, "y":2.25, "w":1.5}, {"label":"2,E", "x":15, "y":2.25}, {"label":"3,0", "x":0, "y":3.25, "w":1.75}, {"label":"3,1", "x":1.75, "y":3.25}, {"label":"3,2", "x":2.75, "y":3.25}, {"label":"3,3", "x":3.75, "y":3.25}, {"label":"3,4", "x":4.75, "y":3.25}, {"label":"3,5", "x":5.75, "y":3.25}, {"label":"3,6", "x":6.75, "y":3.25}, {"label":"3,7", "x":7.75, "y":3.25}, {"label":"3,8", "x":8.75, "y":3.25}, {"label":"3,9", "x":9.75, "y":3.25}, {"label":"3,A", "x":10.75, "y":3.25}, {"label":"3,B", "x":11.75, "y":3.25}, {"label":"3,C", "x":12.75, "y":3.25, "w":2.25}, {"label":"3,E", "x":15, "y":3.25}, {"label":"4,0", "x":0, "y":4.25, "w":2.25}, {"label":"4,1", "x":2.25, "y":4.25}, {"label":"4,2", "x":3.25, "y":4.25}, {"label":"4,3", "x":4.25, "y":4.25}, {"label":"4,4", "x":5.25, "y":4.25}, {"label":"4,5", "x":6.25, "y":4.25}, {"label":"4,6", "x":7.25, "y":4.25}, {"label":"4,7", "x":8.25, "y":4.25}, {"label":"4,8", "x":9.25, "y":4.25}, {"label":"4,9", "x":10.25, "y":4.25}, {"label":"4,A", "x":11.25, "y":4.25}, {"label":"4,B", "x":12.25, "y":4.25, "w":1.75}, {"label":"4,C", "x":14, "y":4.25}, {"label":"4,E", "x":15, "y":4.25}, {"label":"5,0", "x":0, "y":5.25, "w":1.25}, {"label":"5,1", "x":1.25, "y":5.25, "w":1.25}, {"label":"5,2", "x":2.5, "y":5.25, "w":1.25}, {"label":"5,6", "x":3.75, "y":5.25, "w":6.25}, {"label":"5,8", "x":10, "y":5.25}, {"label":"5,9", "x":11, "y":5.25}, {"label":"5,A", "x":12, "y":5.25}, {"label":"5,B", "x":13, "y":5.25}, {"label":"5,C", "x":14, "y":5.25}, {"label":"5,E", "x":15, "y":5.25}] diff --git a/keyboards/handwired/swiftrax/koalafications/rules.mk b/keyboards/handwired/swiftrax/koalafications/rules.mk index 4c7427c0d7..51909d1883 100644 --- a/keyboards/handwired/swiftrax/koalafications/rules.mk +++ b/keyboards/handwired/swiftrax/koalafications/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/swiftrax/nodu/config.h b/keyboards/handwired/swiftrax/nodu/config.h index 485ba97b46..e65ed138ad 100644 --- a/keyboards/handwired/swiftrax/nodu/config.h +++ b/keyboards/handwired/swiftrax/nodu/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 // ROWS: Top to bottom, COLS: Left to right @@ -31,11 +26,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /*EEPROM for via*/ #define DYNAMIC_KEYMAP_LAYER_COUNT 3
\ No newline at end of file diff --git a/keyboards/handwired/swiftrax/nodu/info.json b/keyboards/handwired/swiftrax/nodu/info.json index 40d0073fa7..c73c80f4d5 100644 --- a/keyboards/handwired/swiftrax/nodu/info.json +++ b/keyboards/handwired/swiftrax/nodu/info.json @@ -8,9 +8,12 @@ "pid": "0xEA6E", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layout_aliases": { "LAYOUT": "LAYOUT_60_ansi_split_bs_rshift" }, + "community_layouts": ["60_ansi_split_bs_rshift"], "layouts": { "LAYOUT_60_ansi_split_bs_rshift": { "layout": [{"label":"0,0", "x":0, "y":0}, {"label":"0,1", "x":1, "y":0}, {"label":"0,2", "x":2, "y":0}, {"label":"0,3", "x":3, "y":0}, {"label":"0,4", "x":4, "y":0}, {"label":"0,5", "x":5, "y":0}, {"label":"0,6", "x":6, "y":0}, {"label":"0,7", "x":7, "y":0}, {"label":"0,8", "x":8, "y":0}, {"label":"0,9", "x":9, "y":0}, {"label":"0,A", "x":10, "y":0}, {"label":"0,B", "x":11, "y":0}, {"label":"0,C", "x":12, "y":0}, {"label":"0,D", "x":13, "y":0}, {"label":"2,D", "x":14, "y":0}, {"label":"1,0", "x":0, "y":1, "w":1.5}, {"label":"1,1", "x":1.5, "y":1}, {"label":"1,2", "x":2.5, "y":1}, {"label":"1,3", "x":3.5, "y":1}, {"label":"1,4", "x":4.5, "y":1}, {"label":"1,5", "x":5.5, "y":1}, {"label":"1,6", "x":6.5, "y":1}, {"label":"1,7", "x":7.5, "y":1}, {"label":"1,8", "x":8.5, "y":1}, {"label":"1,9", "x":9.5, "y":1}, {"label":"1,A", "x":10.5, "y":1}, {"label":"1,B", "x":11.5, "y":1}, {"label":"1,C", "x":12.5, "y":1}, {"label":"1,D", "x":13.5, "y":1, "w":1.5}, {"label":"2,0", "x":0, "y":2, "w":1.75}, {"label":"2,1", "x":1.75, "y":2}, {"label":"2,2", "x":2.75, "y":2}, {"label":"2,3", "x":3.75, "y":2}, {"label":"2,4", "x":4.75, "y":2}, {"label":"2,5", "x":5.75, "y":2}, {"label":"2,6", "x":6.75, "y":2}, {"label":"2,7", "x":7.75, "y":2}, {"label":"2,8", "x":8.75, "y":2}, {"label":"2,9", "x":9.75, "y":2}, {"label":"2,A", "x":10.75, "y":2}, {"label":"2,B", "x":11.75, "y":2}, {"label":"2,C", "x":12.75, "y":2, "w":2.25}, {"label":"3,0", "x":0, "y":3, "w":2.25}, {"label":"3,1", "x":2.25, "y":3}, {"label":"3,2", "x":3.25, "y":3}, {"label":"3,3", "x":4.25, "y":3}, {"label":"3,4", "x":5.25, "y":3}, {"label":"3,5", "x":6.25, "y":3}, {"label":"3,6", "x":7.25, "y":3}, {"label":"3,7", "x":8.25, "y":3}, {"label":"3,8", "x":9.25, "y":3}, {"label":"3,9", "x":10.25, "y":3}, {"label":"3,A", "x":11.25, "y":3}, {"label":"3,B", "x":12.25, "y":3, "w":1.75}, {"label":"3,C", "x":14, "y":3}, {"label":"4,0", "x":0, "y":4, "w":1.25}, {"label":"4,1", "x":1.25, "y":4, "w":1.25}, {"label":"4,2", "x":2.5, "y":4, "w":1.25}, {"label":"4,6", "x":3.75, "y":4, "w":6.25}, {"label":"4,8", "x":10, "y":4, "w":1.25}, {"label":"4,9", "x":11.25, "y":4, "w":1.25}, {"label":"4,A", "x":12.5, "y":4, "w":1.25}, {"label":"4,B", "x":13.75, "y":4, "w":1.25}] diff --git a/keyboards/handwired/swiftrax/nodu/rules.mk b/keyboards/handwired/swiftrax/nodu/rules.mk index df4ed84fcd..ab2c49da70 100644 --- a/keyboards/handwired/swiftrax/nodu/rules.mk +++ b/keyboards/handwired/swiftrax/nodu/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = 60_ansi_split_bs_rshift diff --git a/keyboards/handwired/swiftrax/pandamic/config.h b/keyboards/handwired/swiftrax/pandamic/config.h index 9c5757f9c6..b802e4782a 100644 --- a/keyboards/handwired/swiftrax/pandamic/config.h +++ b/keyboards/handwired/swiftrax/pandamic/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 10 -#define MATRIX_COLS 10 // ROWS: Top to bottom, COLS: Left to right @@ -35,11 +30,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION ROW2COL -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /*EEPROM for via*/ #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/handwired/swiftrax/pandamic/info.json b/keyboards/handwired/swiftrax/pandamic/info.json index 59008905dc..b5d0ebd1ba 100644 --- a/keyboards/handwired/swiftrax/pandamic/info.json +++ b/keyboards/handwired/swiftrax/pandamic/info.json @@ -8,6 +8,8 @@ "pid": "0xEB0E", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4.25, "y":0}, {"x":5.25, "y":0}, {"x":6.25, "y":0}, {"x":7.25, "y":0}, {"x":8.25, "y":0}, {"x":9.25, "y":0}, {"x":10.25, "y":0}, {"x":11.25, "y":0}, {"x":12.25, "y":0}, {"x":13.25, "y":0}, {"x":14.25, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":18.25, "y":0}, {"x":19.75, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1, "h":2}, {"x":4.25, "y":1, "w":1.5}, {"x":5.75, "y":1}, {"x":6.75, "y":1}, {"x":7.75, "y":1}, {"x":8.75, "y":1}, {"x":9.75, "y":1}, {"x":10.75, "y":1}, {"x":11.75, "y":1}, {"x":12.75, "y":1}, {"x":13.75, "y":1}, {"x":14.75, "y":1}, {"x":15.75, "y":1}, {"x":16.75, "y":1}, {"x":17.75, "y":1, "w":1.5}, {"x":19.75, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":4.25, "y":2, "w":1.75}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2}, {"x":15, "y":2}, {"x":16, "y":2}, {"x":17, "y":2, "w":2.25}, {"x":19.75, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3, "h":2}, {"x":4.25, "y":3, "w":1.25}, {"x":5.5, "y":3}, {"x":6.5, "y":3}, {"x":7.5, "y":3}, {"x":8.5, "y":3}, {"x":9.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":14.5, "y":3}, {"x":15.5, "y":3}, {"x":16.5, "y":3, "w":1.75}, {"x":18.5, "y":3.25}, {"x":19.75, "y":3}, {"x":0, "y":4, "w":2}, {"x":2, "y":4}, {"x":4.25, "y":4, "w":1.25}, {"x":5.5, "y":4, "w":1.25}, {"x":6.75, "y":4, "w":1.25}, {"x":8, "y":4, "w":6.25}, {"x":14.25, "y":4}, {"x":15.25, "y":4}, {"x":16.25, "y":4}, {"x":17.5, "y":4.25}, {"x":18.5, "y":4.25}, {"x":19.5, "y":4.25}] diff --git a/keyboards/handwired/swiftrax/pandamic/rules.mk b/keyboards/handwired/swiftrax/pandamic/rules.mk index e1c8e595cf..0d8c75f6af 100644 --- a/keyboards/handwired/swiftrax/pandamic/rules.mk +++ b/keyboards/handwired/swiftrax/pandamic/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/swiftrax/the_galleon/config.h b/keyboards/handwired/swiftrax/the_galleon/config.h index c20624f68a..99d688f065 100644 --- a/keyboards/handwired/swiftrax/the_galleon/config.h +++ b/keyboards/handwired/swiftrax/the_galleon/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 14 -#define MATRIX_COLS 9 // ROWS: Top to bottom, COLS: Left to right @@ -32,11 +27,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION ROW2COL -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /*EEPROM for via*/ #define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/handwired/swiftrax/the_galleon/info.json b/keyboards/handwired/swiftrax/the_galleon/info.json index 52a62f2620..bd62d9de2d 100644 --- a/keyboards/handwired/swiftrax/the_galleon/info.json +++ b/keyboards/handwired/swiftrax/the_galleon/info.json @@ -8,6 +8,8 @@ "pid": "0xEA2D", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/handwired/swiftrax/the_galleon/rules.mk b/keyboards/handwired/swiftrax/the_galleon/rules.mk index 662963630b..5587a8dbbc 100644 --- a/keyboards/handwired/swiftrax/the_galleon/rules.mk +++ b/keyboards/handwired/swiftrax/the_galleon/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/swiftrax/unsplit/config.h b/keyboards/handwired/swiftrax/unsplit/config.h index 8d1cb90179..702e06abe2 100644 --- a/keyboards/handwired/swiftrax/unsplit/config.h +++ b/keyboards/handwired/swiftrax/unsplit/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 // ROWS: Top to bottom, COLS: Left to right @@ -30,9 +25,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 diff --git a/keyboards/handwired/swiftrax/unsplit/info.json b/keyboards/handwired/swiftrax/unsplit/info.json index 9f39a2857b..619bd652fb 100644 --- a/keyboards/handwired/swiftrax/unsplit/info.json +++ b/keyboards/handwired/swiftrax/unsplit/info.json @@ -8,6 +8,8 @@ "pid": "0xEAB1", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [{"x":3, "y":0.25}, {"x":13, "y":0.25}, {"x":2, "y":0.5}, {"x":4, "y":0.5}, {"x":12, "y":0.5}, {"x":14, "y":0.5}, {"x":5, "y":0.625}, {"x":11, "y":0.625}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":15, "y":1}, {"x":16, "y":1}, {"x":3, "y":1.25}, {"x":13, "y":1.25}, {"x":2, "y":1.5}, {"x":4, "y":1.5}, {"x":12, "y":1.5}, {"x":14, "y":1.5}, {"x":5, "y":1.625}, {"x":11, "y":1.625}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":15, "y":2}, {"x":16, "y":2}, {"x":3, "y":2.25}, {"x":13, "y":2.25}, {"x":2, "y":2.5}, {"x":4, "y":2.5}, {"x":12, "y":2.5}, {"x":14, "y":2.5}, {"x":5, "y":2.625}, {"x":11, "y":2.625}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":15, "y":3}, {"x":16, "y":3}, {"x":2.5, "y":3.5}, {"x":13.5, "y":3.5}, {"x":3.5, "y":3.5}, {"x":12.5, "y":3.5}, {"x":4.5, "y":3.75}, {"x":11.5, "y":3.75}, {"x":5.5, "y":4}, {"x":10.5, "y":4}] diff --git a/keyboards/handwired/swiftrax/unsplit/rules.mk b/keyboards/handwired/swiftrax/unsplit/rules.mk index 14c4d5ddea..d737227db3 100644 --- a/keyboards/handwired/swiftrax/unsplit/rules.mk +++ b/keyboards/handwired/swiftrax/unsplit/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/swiftrax/walter/config.h b/keyboards/handwired/swiftrax/walter/config.h index cfe446ff8e..d58a3cbfb4 100644 --- a/keyboards/handwired/swiftrax/walter/config.h +++ b/keyboards/handwired/swiftrax/walter/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 // ROWS: Top to bottom, COLS: Left to right @@ -31,12 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - #define ENCODERS_PAD_A { B3 } #define ENCODERS_PAD_B { B7 } diff --git a/keyboards/handwired/swiftrax/walter/info.json b/keyboards/handwired/swiftrax/walter/info.json index 5de2a6f5c7..675da09c9c 100644 --- a/keyboards/handwired/swiftrax/walter/info.json +++ b/keyboards/handwired/swiftrax/walter/info.json @@ -8,6 +8,8 @@ "pid": "0xE964", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_65_ansi": { "layout": [ diff --git a/keyboards/handwired/swiftrax/walter/rules.mk b/keyboards/handwired/swiftrax/walter/rules.mk index 0d1740dcad..5e11a757b7 100644 --- a/keyboards/handwired/swiftrax/walter/rules.mk +++ b/keyboards/handwired/swiftrax/walter/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/symmetric70_proto/matrix_debug/matrix.c b/keyboards/handwired/symmetric70_proto/matrix_debug/matrix.c index 7e15761a98..8a303714cf 100644 --- a/keyboards/handwired/symmetric70_proto/matrix_debug/matrix.c +++ b/keyboards/handwired/symmetric70_proto/matrix_debug/matrix.c @@ -295,7 +295,7 @@ void matrix_init(void) { debounce_init(MATRIX_ROWS); - matrix_init_quantum(); + matrix_init_kb(); } uint8_t matrix_scan(void) { @@ -323,7 +323,7 @@ uint8_t matrix_scan(void) { MATRIX_DEBUG_GAP(); MATRIX_DEBUG_SCAN_START(); - matrix_scan_quantum(); + matrix_scan_kb(); MATRIX_DEBUG_SCAN_END(); return (uint8_t)changed; } diff --git a/keyboards/handwired/symmetric70_proto/matrix_fast/matrix.c b/keyboards/handwired/symmetric70_proto/matrix_fast/matrix.c index cb21bfcf8d..2bc97bd9e8 100644 --- a/keyboards/handwired/symmetric70_proto/matrix_fast/matrix.c +++ b/keyboards/handwired/symmetric70_proto/matrix_fast/matrix.c @@ -171,7 +171,7 @@ void matrix_init(void) { debounce_init(MATRIX_ROWS); - matrix_init_quantum(); + matrix_init_kb(); } uint8_t matrix_scan(void) { @@ -228,7 +228,7 @@ uint8_t matrix_scan(void) { MATRIX_DEBUG_SCAN_END(); MATRIX_DEBUG_GAP(); MATRIX_DEBUG_SCAN_START(); - matrix_scan_quantum(); + matrix_scan_kb(); MATRIX_DEBUG_SCAN_END(); return (uint8_t)changed; } diff --git a/keyboards/handwired/symmetric70_proto/promicro/config.h b/keyboards/handwired/symmetric70_proto/promicro/config.h index caba8ebf6d..07f30032e6 100644 --- a/keyboards/handwired/symmetric70_proto/promicro/config.h +++ b/keyboards/handwired/symmetric70_proto/promicro/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -45,68 +44,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - -//#define RGB_DI_PIN E2 -//#ifdef RGB_DI_PIN -//# define RGBLED_NUM 16 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -//#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -123,10 +65,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 - #ifdef DEBUG_CONFIG # define MATRIX_DEBUG_PIN D3 # include "../debug_config.h" diff --git a/keyboards/handwired/symmetric70_proto/promicro/info.json b/keyboards/handwired/symmetric70_proto/promicro/info.json index 8ee579cd60..29feccc819 100644 --- a/keyboards/handwired/symmetric70_proto/promicro/info.json +++ b/keyboards/handwired/symmetric70_proto/promicro/info.json @@ -1,3 +1,8 @@ { - "keyboard_name": "Symmetric70 prototype promicro" + "keyboard_name": "Symmetric70 prototype promicro", + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina" } diff --git a/keyboards/handwired/symmetric70_proto/promicro/rules.mk b/keyboards/handwired/symmetric70_proto/promicro/rules.mk index fbe412faef..29f6808ed5 100644 --- a/keyboards/handwired/symmetric70_proto/promicro/rules.mk +++ b/keyboards/handwired/symmetric70_proto/promicro/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/symmetric70_proto/proton_c/config.h b/keyboards/handwired/symmetric70_proto/proton_c/config.h index 2fe22de67f..e757e1e776 100644 --- a/keyboards/handwired/symmetric70_proto/proton_c/config.h +++ b/keyboards/handwired/symmetric70_proto/proton_c/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -53,68 +52,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - -//#define RGB_DI_PIN E2 -//#ifdef RGB_DI_PIN -//# define RGBLED_NUM 16 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -//#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -131,10 +73,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 - #ifdef DEBUG_CONFIG # define MATRIX_DEBUG_PIN A9 # include "../debug_config.h" diff --git a/keyboards/handwired/symmetric70_proto/proton_c/info.json b/keyboards/handwired/symmetric70_proto/proton_c/info.json index a105f39be6..a6f017ae75 100644 --- a/keyboards/handwired/symmetric70_proto/proton_c/info.json +++ b/keyboards/handwired/symmetric70_proto/proton_c/info.json @@ -1,3 +1,6 @@ { - "keyboard_name": "Symmetric70 prototype proton-c" + "keyboard_name": "Symmetric70 prototype proton-c", + "processor": "STM32F303", + "bootloader": "stm32-dfu", + "board": "QMK_PROTON_C" } diff --git a/keyboards/handwired/symmetric70_proto/proton_c/rules.mk b/keyboards/handwired/symmetric70_proto/proton_c/rules.mk index 81d40223ea..29f6808ed5 100644 --- a/keyboards/handwired/symmetric70_proto/proton_c/rules.mk +++ b/keyboards/handwired/symmetric70_proto/proton_c/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F303 -BOARD = QMK_PROTON_C - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/symmetry60/config.h b/keyboards/handwired/symmetry60/config.h index 740f5d05ef..7c1deda7d5 100644 --- a/keyboards/handwired/symmetry60/config.h +++ b/keyboards/handwired/symmetry60/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 /* * Keyboard Matrix Assignments @@ -57,14 +52,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_VAL_STEP 8 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/symmetry60/info.json b/keyboards/handwired/symmetry60/info.json index e585e367a8..850ae03b35 100644 --- a/keyboards/handwired/symmetry60/info.json +++ b/keyboards/handwired/symmetry60/info.json @@ -8,6 +8,9 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "community_layouts": ["ortho_5x14"], "layouts": { "LAYOUT_ortho_5x14": { "layout": [ diff --git a/keyboards/handwired/symmetry60/rules.mk b/keyboards/handwired/symmetry60/rules.mk index efbbc778ce..a44795bae0 100644 --- a/keyboards/handwired/symmetry60/rules.mk +++ b/keyboards/handwired/symmetry60/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -17,5 +11,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes # Use link time optimization - -LAYOUTS = ortho_5x14 diff --git a/keyboards/handwired/t111/config.h b/keyboards/handwired/t111/config.h index 691bc7d121..c5f41e5e05 100644 --- a/keyboards/handwired/t111/config.h +++ b/keyboards/handwired/t111/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 14 #define MATRIX_ROW_PINS { A15, B6, B5, B4, B3, B9, B8, B7 } /* 0 1 2 3 4 5 6 7*/ @@ -32,33 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION ROW2COL -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -74,7 +42,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/t111/info.json b/keyboards/handwired/t111/info.json index ff231bb66a..0b5c104618 100644 --- a/keyboards/handwired/t111/info.json +++ b/keyboards/handwired/t111/info.json @@ -8,6 +8,8 @@ "pid": "0x6FAA", "device_version": "0.0.1" }, + "processor": "STM32F103", + "bootloader": "stm32duino", "layouts": { "LAYOUT": { "layout": [{"label":"Break", "x":0, "y":0}, {"label":"PF1", "x":2, "y":0}, {"label":"PF2", "x":3, "y":0}, {"label":"PF3", "x":4, "y":0}, {"label":"PF4", "x":5, "y":0}, {"label":"PF5", "x":6, "y":0}, {"label":"PF6", "x":7, "y":0}, {"label":"PF7", "x":8, "y":0}, {"label":"PF8", "x":9, "y":0}, {"label":"PF9", "x":10, "y":0}, {"label":"PF10", "x":11, "y":0}, {"label":"PF11", "x":12, "y":0}, {"label":"PF12", "x":13, "y":0}, {"label":"PF13", "x":14, "y":0}, {"label":"PF14", "x":15, "y":0}, {"label":"PF15", "x":16, "y":0}, {"label":"PF16", "x":17, "y":0}, {"label":"Esc", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"~", "x":13, "y":1.5}, {"label":"bkspc", "x":14, "y":1.5, "w":1.25}, {"label":"Ins", "x":15.5, "y":1.5}, {"label":"Cls", "x":16.5, "y":1.5}, {"label":"*", "x":17.75, "y":1.5}, {"label":"/", "x":18.75, "y":1.5}, {"label":"+", "x":19.75, "y":1.5}, {"label":"-", "x":20.75, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"El", "x":15.5, "y":2.5}, {"label":"Dup", "x":16.5, "y":2.5}, {"label":"7", "x":17.75, "y":2.5}, {"label":"8", "x":18.75, "y":2.5}, {"label":"9", "x":19.75, "y":2.5}, {"label":"=", "x":20.75, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"|", "x":12.75, "y":3.5}, {"label":"Enter", "x":13.75, "y":2.5, "w":1.5, "h":2}, {"label":"Del", "x":15.5, "y":3.5}, {"label":"Home", "x":16.5, "y":3.5}, {"label":"4", "x":17.75, "y":3.5}, {"label":"5", "x":18.75, "y":3.5}, {"label":"6", "x":19.75, "y":3.5}, {"label":",", "x":20.75, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"x":12.25, "y":4.5}, {"label":"Shift", "x":13.25, "y":4.5, "w":2}, {"label":"\u0432\u2020\u2018", "x":15.5, "y":4.5}, {"label":"\u0432\u2020\u201c", "x":16.5, "y":4.5}, {"label":"1", "x":17.75, "y":4.5}, {"label":"2", "x":18.75, "y":4.5}, {"label":"3", "x":19.75, "y":4.5}, {"label":"Enter", "x":20.75, "y":4.5, "h":2}, {"label":"Caps", "x":1.75, "y":5.5}, {"label":"Graph", "x":2.75, "y":5.5, "w":1.5}, {"x":4.25, "y":5.5, "w":8}, {"label":"Alt", "x":12.25, "y":5.5, "w":1.5}, {"label":"\u0432\u2020\u0452", "x":15.5, "y":5.5}, {"label":"\u0432\u2020\u2019", "x":16.5, "y":5.5}, {"label":"0", "x":17.75, "y":5.5, "w":2}, {"label":".", "x":19.75, "y":5.5}] diff --git a/keyboards/handwired/t111/keymaps/oleg/keymap.c b/keyboards/handwired/t111/keymaps/oleg/keymap.c index 0a00151f89..dd0c097197 100644 --- a/keyboards/handwired/t111/keymaps/oleg/keymap.c +++ b/keyboards/handwired/t111/keymaps/oleg/keymap.c @@ -49,7 +49,7 @@ enum unicode_names { UAST }; -const uint32_t PROGMEM unicode_map[] = { +const uint32_t unicode_map[] PROGMEM = { [USCT] = 0x00A7, // § [ULSB] = 0x005B, // [ [URSB] = 0x005D, // ] diff --git a/keyboards/handwired/t111/rules.mk b/keyboards/handwired/t111/rules.mk index 3e70fa7f95..3939229475 100644 --- a/keyboards/handwired/t111/rules.mk +++ b/keyboards/handwired/t111/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = STM32F103 - -# Bootloader selection -BOOTLOADER = stm32duino - # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/handwired/tennie/config.h b/keyboards/handwired/tennie/config.h index 9998e313f5..71a51554f2 100644 --- a/keyboards/handwired/tennie/config.h +++ b/keyboards/handwired/tennie/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 3 -#define MATRIX_COLS 4 /* * Keyboard Matrix Assignments @@ -39,14 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 #define RGBW #define RGB_DI_PIN D1 #ifdef RGB_DI_PIN @@ -68,45 +55,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_TWINKLE #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -122,7 +75,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/tennie/info.json b/keyboards/handwired/tennie/info.json index 4a810d84d9..f2a8bcc1f9 100644 --- a/keyboards/handwired/tennie/info.json +++ b/keyboards/handwired/tennie/info.json @@ -8,6 +8,8 @@ "pid": "0x1313", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [{"x":0.5, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0.5, "y":2}, {"x":1.5, "y":2}, {"x":2.5, "y":2}] diff --git a/keyboards/handwired/tennie/rules.mk b/keyboards/handwired/tennie/rules.mk index b619ca4952..477ce541fd 100644 --- a/keyboards/handwired/tennie/rules.mk +++ b/keyboards/handwired/tennie/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/terminus_mini/config.h b/keyboards/handwired/terminus_mini/config.h index 4dec0f1341..63e11e97af 100644 --- a/keyboards/handwired/terminus_mini/config.h +++ b/keyboards/handwired/terminus_mini/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 /* * Keyboard Matrix Assignments @@ -38,10 +33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 //define tapping-toggle count #define TAPPING_TOGGLE 1 @@ -49,41 +40,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //define maximum duration of hold required to register a tap vs hold default is 200 #define TAPPING_TERM 150 //reduce time required to register a held key -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * rules.mk for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/handwired/terminus_mini/info.json b/keyboards/handwired/terminus_mini/info.json index 79cbe720a3..c059e9af7e 100644 --- a/keyboards/handwired/terminus_mini/info.json +++ b/keyboards/handwired/terminus_mini/info.json @@ -8,6 +8,8 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/terminus_mini/rules.mk b/keyboards/handwired/terminus_mini/rules.mk index 8121b44ca7..304b8ba7b9 100644 --- a/keyboards/handwired/terminus_mini/rules.mk +++ b/keyboards/handwired/terminus_mini/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/trackpoint/config.h b/keyboards/handwired/trackpoint/config.h index ed6b4f2180..e42a53eeb8 100644 --- a/keyboards/handwired/trackpoint/config.h +++ b/keyboards/handwired/trackpoint/config.h @@ -1,9 +1,5 @@ #pragma once -#include "config_common.h" - -#define MATRIX_ROWS 1 -#define MATRIX_COLS 3 #ifdef PS2_DRIVER_USART #define PS2_CLOCK_PIN D5 @@ -47,7 +43,5 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -#define DEBOUNCE 5 - #define LOCKING_SUPPORT_ENABLE #define LOCKING_RESYNC_ENABLE diff --git a/keyboards/handwired/trackpoint/info.json b/keyboards/handwired/trackpoint/info.json index 3f2d1f2290..b0c0848ca6 100644 --- a/keyboards/handwired/trackpoint/info.json +++ b/keyboards/handwired/trackpoint/info.json @@ -8,6 +8,8 @@ "pid": "0x5678", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/trackpoint/rules.mk b/keyboards/handwired/trackpoint/rules.mk index 1a452149c9..ca3836ef06 100644 --- a/keyboards/handwired/trackpoint/rules.mk +++ b/keyboards/handwired/trackpoint/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/tractyl_manuform/4x6_right/config.h b/keyboards/handwired/tractyl_manuform/4x6_right/config.h index ffc75d00cf..f602a26b42 100644 --- a/keyboards/handwired/tractyl_manuform/4x6_right/config.h +++ b/keyboards/handwired/tractyl_manuform/4x6_right/config.h @@ -18,12 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 10 -#define MATRIX_COLS 6 // wiring of each half #define MATRIX_COL_PINS { C0, C1, C2, C3, C4, C5 } @@ -44,23 +38,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SPLIT_TRANSPORT_MIRROR #define SPLIT_HAND_PIN A6 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - // #define DEBUG_LED_PIN D6 #define ROTATIONAL_TRANSFORM_ANGLE -25 -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 -#define BOOTMAGIC_LITE_ROW_RIGHT 4 -#define BOOTMAGIC_LITE_COLUMN_RIGHT 5 - #define AUDIO_PIN C6 #define AUDIO_PIN_ALT B7 @@ -68,14 +49,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DYNAMIC_KEYMAP_LAYER_COUNT 16 #define LAYER_STATE_16BIT -/* serial.c configuration for split keyboard */ -#define SOFT_SERIAL_PIN D3 #define EE_HANDS - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING diff --git a/keyboards/handwired/tractyl_manuform/4x6_right/info.json b/keyboards/handwired/tractyl_manuform/4x6_right/info.json index 62b61072ec..ab4b08c8eb 100644 --- a/keyboards/handwired/tractyl_manuform/4x6_right/info.json +++ b/keyboards/handwired/tractyl_manuform/4x6_right/info.json @@ -6,6 +6,14 @@ "pid": "0x3537", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D3", + "bootmagic": { + "matrix": [4, 5] + } + }, + "processor": "at90usb1286", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_4x6_right": { "layout": [ diff --git a/keyboards/handwired/tractyl_manuform/4x6_right/rules.mk b/keyboards/handwired/tractyl_manuform/4x6_right/rules.mk index c497bb2ee8..8c9bf430d8 100644 --- a/keyboards/handwired/tractyl_manuform/4x6_right/rules.mk +++ b/keyboards/handwired/tractyl_manuform/4x6_right/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/config.h index 396508380e..902f292b10 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/config.h @@ -18,11 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 12 -#define MATRIX_COLS 6 - // wiring of each half // left #define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } @@ -33,9 +28,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW -/* serial.c configuration for split keyboard */ //#undef USE_I2C -#define SOFT_SERIAL_PIN D0 #define MASTER_RIGHT /* PMW3360 Settings */ diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/info.json b/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/info.json index 63663f337d..e58e87b2dd 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/info.json +++ b/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/info.json @@ -1,3 +1,8 @@ { - "keyboard_name": "Tractyl Manuform(5x6) Arduino Micro (r)/ Pro Micro (l)" + "keyboard_name": "Tractyl Manuform(5x6) Arduino Micro (r)/ Pro Micro (l)", + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina" } diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/rules.mk b/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/rules.mk index cf663a7ed6..e69de29bb2 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/rules.mk +++ b/keyboards/handwired/tractyl_manuform/5x6_right/arduinomicro/rules.mk @@ -1,5 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/config.h index 53a2b41e06..8eff4ae0df 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/config.h @@ -18,24 +18,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 12 -#define MATRIX_COLS 6 #define DIODE_DIRECTION COL2ROW #define ROTATIONAL_TRANSFORM_ANGLE -25 #define POINTING_DEVICE_INVERT_X -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 -#define BOOTMAGIC_LITE_ROW_RIGHT 6 -#define BOOTMAGIC_LITE_COLUMN_RIGHT 5 - #define DYNAMIC_KEYMAP_LAYER_COUNT 16 #define LAYER_STATE_16BIT diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h index 402f0c99e5..e4856c4eec 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h @@ -36,8 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define AUDIO_PIN C6 -/* serial.c configuration for split keyboard */ -#define SOFT_SERIAL_PIN D2 #define EE_HANDS #define ENCODERS_PAD_A \ diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/info.json b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/info.json index b3cb5928de..4fcfeed921 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/info.json +++ b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/info.json @@ -1,3 +1,8 @@ { - "keyboard_name": "Tractyl Manuform (5x6) Elite-C" + "keyboard_name": "Tractyl Manuform (5x6) Elite-C", + "split": { + "soft_serial_pin": "D2" + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu" } diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/rules.mk b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/rules.mk index e594097f8b..16c76d7f49 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/rules.mk +++ b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - LTO_ENABLE := yes RGBLIGHT_ENABLE = no OLED_ENABLE = no diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/info.json b/keyboards/handwired/tractyl_manuform/5x6_right/f303/info.json index d88708d17d..3ad29d36b8 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f303/info.json +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/info.json @@ -1,3 +1,5 @@ { - "keyboard_name": "Tractyl Manuform (5x6) Proton-C" + "keyboard_name": "Tractyl Manuform (5x6) Proton-C", + "processor": "STM32F303", + "bootloader": "stm32-dfu" } diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/rules.mk b/keyboards/handwired/tractyl_manuform/5x6_right/f303/rules.mk index 622d22704d..7abe7f4ca2 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f303/rules.mk +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = STM32F303 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # KEYBOARD_SHARED_EP = yes CONSOLE_ENABLE = yes diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/info.json b/keyboards/handwired/tractyl_manuform/5x6_right/f411/info.json index 7466004165..9b81dc18eb 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/info.json +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/info.json @@ -1,3 +1,6 @@ { - "keyboard_name": "Tractyl Manuform (5x6) BlackPill" + "keyboard_name": "Tractyl Manuform (5x6) BlackPill", + "processor": "STM32F411", + "bootloader": "stm32-dfu", + "board": "BLACKPILL_STM32_F411" } diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/rules.mk b/keyboards/handwired/tractyl_manuform/5x6_right/f411/rules.mk index dcbcc7ee7e..4b8fe43b84 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/rules.mk +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F411 -BOARD = BLACKPILL_STM32_F411 - -# Bootloader selection -BOOTLOADER = stm32-dfu - KEYBOARD_SHARED_EP = yes CONSOLE_ENABLE = yes MOUSE_SHARED_EP = yes diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/info.json b/keyboards/handwired/tractyl_manuform/5x6_right/info.json index 5000486242..1ea3e6ab8b 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/info.json +++ b/keyboards/handwired/tractyl_manuform/5x6_right/info.json @@ -4,6 +4,11 @@ "pid": "0x3536", "device_version": "0.0.1" }, + "split": { + "bootmagic": { + "matrix": [6, 5] + } + }, "layouts": { "LAYOUT_5x6_right": { "layout": [ diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h index 735fe96f0f..cae5b7fc14 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h @@ -40,8 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define AUDIO_PIN C6 #define AUDIO_PIN_ALT B7 -/* serial.c configuration for split keyboard */ -#define SOFT_SERIAL_PIN D2 #define EE_HANDS #define ENCODERS_PAD_A \ diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/info.json b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/info.json index dfdbc435bc..a7fb36c71e 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/info.json +++ b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/info.json @@ -1,3 +1,8 @@ { - "keyboard_name": "Tractyl Manuform (5x6) Teensy 2.0++" + "keyboard_name": "Tractyl Manuform (5x6) Teensy 2.0++", + "split": { + "soft_serial_pin": "D2" + }, + "processor": "at90usb1286", + "bootloader": "halfkay" } diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/rules.mk b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/rules.mk index 149471682d..e69de29bb2 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/rules.mk +++ b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/rules.mk @@ -1,5 +0,0 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = halfkay diff --git a/keyboards/handwired/tractyl_manuform/config.h b/keyboards/handwired/tractyl_manuform/config.h index 6f62685f4e..9f4dd8651b 100644 --- a/keyboards/handwired/tractyl_manuform/config.h +++ b/keyboards/handwired/tractyl_manuform/config.h @@ -18,7 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* disable debug print */ // #define NO_DEBUG diff --git a/keyboards/handwired/traveller/config.h b/keyboards/handwired/traveller/config.h index ac4d8e3825..bd0d306dc3 100644 --- a/keyboards/handwired/traveller/config.h +++ b/keyboards/handwired/traveller/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 13 /* * Keyboard Matrix Assignments @@ -39,10 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_BREATHING -//#define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN B2 #ifdef RGB_DI_PIN # define RGBLED_NUM 1 @@ -51,51 +42,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define RGBLIGHT_VAL_STEP 17 //# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ //# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -111,7 +59,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/traveller/info.json b/keyboards/handwired/traveller/info.json index 143bf50b91..ee064ad0cc 100644 --- a/keyboards/handwired/traveller/info.json +++ b/keyboards/handwired/traveller/info.json @@ -8,6 +8,8 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/traveller/rules.mk b/keyboards/handwired/traveller/rules.mk index 7d2cea91df..aa4c817d2a 100644 --- a/keyboards/handwired/traveller/rules.mk +++ b/keyboards/handwired/traveller/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/tritium_numpad/config.h b/keyboards/handwired/tritium_numpad/config.h index 7fee66e04f..21e3abe491 100644 --- a/keyboards/handwired/tritium_numpad/config.h +++ b/keyboards/handwired/tritium_numpad/config.h @@ -17,31 +17,17 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 4 // ROWS: Top to bottom, COLS: Left to right #define MATRIX_ROW_PINS { D1, D0, D4, C6, D7, E6 } #define MATRIX_COL_PINS { F4, F6, B1, B2 } -#define LED_NUM_LOCK_PIN D5 -#define LED_PIN_ON_STATE 0 - #define BACKLIGHT_PIN B6 /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/tritium_numpad/info.json b/keyboards/handwired/tritium_numpad/info.json index 1a2f22a835..8dc967df96 100644 --- a/keyboards/handwired/tritium_numpad/info.json +++ b/keyboards/handwired/tritium_numpad/info.json @@ -8,6 +8,13 @@ "pid": "0x6060", "device_version": "0.0.3" }, + "indicators": { + "num_lock": "D5", + "on_state": 0 + }, + "processor": "atmega32u4", + "bootloader": "caterina", + "community_layouts": ["numpad_6x4", "ortho_6x4"], "layouts": { "LAYOUT_numpad_6x4": { "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k13", "x":3, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}, {"label":"k30", "x":0, "y":3}, {"label":"k31", "x":1, "y":3}, {"label":"k32", "x":2, "y":3}, {"label":"k23", "x":3, "y":2, "h":2}, {"label":"k40", "x":0, "y":4}, {"label":"k41", "x":1, "y":4}, {"label":"k42", "x":2, "y":4}, {"label":"k50", "x":0, "y":5, "w":2}, {"label":"k52", "x":2, "y":5}, {"label":"k43", "x":3, "y":4, "h":2}] diff --git a/keyboards/handwired/tritium_numpad/rules.mk b/keyboards/handwired/tritium_numpad/rules.mk index ae586aa093..ad6bc60f96 100644 --- a/keyboards/handwired/tritium_numpad/rules.mk +++ b/keyboards/handwired/tritium_numpad/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no - -LAYOUTS = numpad_6x4 ortho_6x4 diff --git a/keyboards/handwired/twadlee/tp69/config.h b/keyboards/handwired/twadlee/tp69/config.h index 37f5dbae6e..7c1079397a 100644 --- a/keyboards/handwired/twadlee/tp69/config.h +++ b/keyboards/handwired/twadlee/tp69/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -//#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 10 -#define MATRIX_COLS 8 /* * Keyboard Matrix Assignments @@ -42,68 +37,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -119,7 +57,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/twadlee/tp69/info.json b/keyboards/handwired/twadlee/tp69/info.json index 3669be349f..a06580eadd 100644 --- a/keyboards/handwired/twadlee/tp69/info.json +++ b/keyboards/handwired/twadlee/tp69/info.json @@ -8,6 +8,8 @@ "pid": "0xCACA", "device_version": "0.0.1" }, + "processor": "MKL26Z64", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":14.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3}, {"x":13.25, "y":3, "w":2.75}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2}, {"x":5.75, "y":4}, {"x":6.75, "y":4}, {"x":7.75, "y":4}, {"x":8.75, "y":4, "w":2.25}, {"x":11, "y":4, "w":1.25}, {"x":12.25, "y":4, "w":1.25}, {"x":13.5, "y":4, "w":1.25}, {"x":14.75, "y":4, "w":1.25}] diff --git a/keyboards/handwired/twadlee/tp69/rules.mk b/keyboards/handwired/twadlee/tp69/rules.mk index a1c290cf15..b1b6b8e616 100644 --- a/keyboards/handwired/twadlee/tp69/rules.mk +++ b/keyboards/handwired/twadlee/tp69/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = MKL26Z64 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/twig/twig50/config.h b/keyboards/handwired/twig/twig50/config.h index ecdf7bf9fb..59a6a26c44 100644 --- a/keyboards/handwired/twig/twig50/config.h +++ b/keyboards/handwired/twig/twig50/config.h @@ -3,18 +3,12 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 14 #define MATRIX_ROW_PINS { B7, B6, B5, B4 } #define MATRIX_COL_PINS { A2, A1, A0, B8 , B13, B14, B15, B9, B10, B11, B3, B2, B1, B0} #define DIODE_DIRECTION COL2ROW -#define DEBOUNCE 8 #define TAPPING_TERM 150 #define FORCE_NKRO diff --git a/keyboards/handwired/twig/twig50/info.json b/keyboards/handwired/twig/twig50/info.json index 12b2e397b1..aae4bfa531 100644 --- a/keyboards/handwired/twig/twig50/info.json +++ b/keyboards/handwired/twig/twig50/info.json @@ -8,6 +8,10 @@ "pid": "0x6060", "device_version": "0.2.1" }, + "processor": "STM32F303", + "bootloader": "stm32-dfu", + "board": "QMK_PROTON_C", + "debounce": 8, "layouts": { "LAYOUT_diag_4x14": { "layout": [ diff --git a/keyboards/handwired/twig/twig50/rules.mk b/keyboards/handwired/twig/twig50/rules.mk index 137022d672..60962ea47d 100644 --- a/keyboards/handwired/twig/twig50/rules.mk +++ b/keyboards/handwired/twig/twig50/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F303 -BOARD = QMK_PROTON_C - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/unicomp_mini_m/config.h b/keyboards/handwired/unicomp_mini_m/config.h index 77e2d1c7ea..f48e5ae696 100644 --- a/keyboards/handwired/unicomp_mini_m/config.h +++ b/keyboards/handwired/unicomp_mini_m/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 16 /* * Keyboard Matrix Assignments @@ -36,16 +31,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { F7, F6, F5, F4, F3, F2, F1, F0, E6, E7, B0, B1 } #define MATRIX_COL_PINS { C7, C6, C5, C4, C3, C2, C1, C0, E1, E0, D7, B7, D5, D4, D3, D2 } -#define LED_PIN_ON_STATE 0 -#define LED_NUM_LOCK_PIN B6 -#define LED_CAPS_LOCK_PIN B5 -#define LED_SCROLL_LOCK_PIN B4 - /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed (5 is default) */ -#define DEBOUNCE 5 - /* The Mini M has no diodes */ #define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/unicomp_mini_m/info.json b/keyboards/handwired/unicomp_mini_m/info.json index ea2ab10b1b..7216203ba8 100644 --- a/keyboards/handwired/unicomp_mini_m/info.json +++ b/keyboards/handwired/unicomp_mini_m/info.json @@ -8,6 +8,14 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "B5", + "num_lock": "B6", + "scroll_lock": "B4", + "on_state": 0 + }, + "processor": "at90usb1286", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/unicomp_mini_m/rules.mk b/keyboards/handwired/unicomp_mini_m/rules.mk index 69f5cb2d79..7ae681a542 100644 --- a/keyboards/handwired/unicomp_mini_m/rules.mk +++ b/keyboards/handwired/unicomp_mini_m/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/unk/rev1/config.h b/keyboards/handwired/unk/rev1/config.h index a3e09f1aad..c6674b53f7 100644 --- a/keyboards/handwired/unk/rev1/config.h +++ b/keyboards/handwired/unk/rev1/config.h @@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 10 -#define MATRIX_COLS 8 - - #define MASTER_LEFT // Comment this line for the right half firmware @@ -38,21 +30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ - -#define SOFT_SERIAL_PIN D0 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/unk/rev1/info.json b/keyboards/handwired/unk/rev1/info.json index ec0927a0d3..bb6031cfd0 100644 --- a/keyboards/handwired/unk/rev1/info.json +++ b/keyboards/handwired/unk/rev1/info.json @@ -8,6 +8,11 @@ "pid": "0x3060", "device_version": "0.0.1" }, + "split": { + "soft_serial_pin": "D0" + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/unk/rules.mk b/keyboards/handwired/unk/rules.mk index 84e2f3e1b2..c8a36bee0f 100644 --- a/keyboards/handwired/unk/rules.mk +++ b/keyboards/handwired/unk/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/uthol/config.h b/keyboards/handwired/uthol/config.h index de93efe186..5e6816b6b0 100644 --- a/keyboards/handwired/uthol/config.h +++ b/keyboards/handwired/uthol/config.h @@ -17,10 +17,5 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 12 #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/handwired/uthol/rev1/config.h b/keyboards/handwired/uthol/rev1/config.h index 89115c5aee..b5e17a0fe3 100644 --- a/keyboards/handwired/uthol/rev1/config.h +++ b/keyboards/handwired/uthol/rev1/config.h @@ -17,7 +17,6 @@ #pragma once -#include "config_common.h" /* Uthol PCB default pin-out */ #define MATRIX_ROW_PINS { D1, D0, D4, C6, D7 } diff --git a/keyboards/handwired/uthol/rev1/info.json b/keyboards/handwired/uthol/rev1/info.json index 44de6469f5..1a0047080a 100644 --- a/keyboards/handwired/uthol/rev1/info.json +++ b/keyboards/handwired/uthol/rev1/info.json @@ -2,5 +2,7 @@ "keyboard_name": "UtholOne", "usb": { "device_version": "0.0.1" - } + }, + "processor": "atmega32u4", + "bootloader": "caterina" } diff --git a/keyboards/handwired/uthol/rev1/rules.mk b/keyboards/handwired/uthol/rev1/rules.mk index 0da1dde9cb..c06a99e1e4 100644 --- a/keyboards/handwired/uthol/rev1/rules.mk +++ b/keyboards/handwired/uthol/rev1/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/uthol/rev2/config.h b/keyboards/handwired/uthol/rev2/config.h index 03263fbbcc..dd132283c3 100644 --- a/keyboards/handwired/uthol/rev2/config.h +++ b/keyboards/handwired/uthol/rev2/config.h @@ -17,7 +17,6 @@ #pragma once -#include "config_common.h" /* Uthol PCB default pin-out */ #define MATRIX_ROW_PINS { B1, F7, F6, F5, F4 } diff --git a/keyboards/handwired/uthol/rev2/info.json b/keyboards/handwired/uthol/rev2/info.json index fbb7309629..95112123d5 100644 --- a/keyboards/handwired/uthol/rev2/info.json +++ b/keyboards/handwired/uthol/rev2/info.json @@ -2,5 +2,7 @@ "keyboard_name": "UtholTwo", "usb": { "device_version": "0.0.2" - } + }, + "processor": "atmega32u4", + "bootloader": "caterina" } diff --git a/keyboards/handwired/uthol/rev2/rules.mk b/keyboards/handwired/uthol/rev2/rules.mk index 63476766fd..445e503d0b 100644 --- a/keyboards/handwired/uthol/rev2/rules.mk +++ b/keyboards/handwired/uthol/rev2/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/uthol/rev3/config.h b/keyboards/handwired/uthol/rev3/config.h index 943f9615ea..dff88fb7c6 100644 --- a/keyboards/handwired/uthol/rev3/config.h +++ b/keyboards/handwired/uthol/rev3/config.h @@ -17,7 +17,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ // A11 and A12 dont work. They are reserved for USB. B2 is reserved for BOOT1 @@ -43,9 +42,6 @@ #define OLED_DISPLAY_ADDRESS 0x3C #define OLED_RESET -1 -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/handwired/uthol/rev3/info.json b/keyboards/handwired/uthol/rev3/info.json index 44078b4ab1..d95bbc9bca 100644 --- a/keyboards/handwired/uthol/rev3/info.json +++ b/keyboards/handwired/uthol/rev3/info.json @@ -2,5 +2,8 @@ "keyboard_name": "UtholThree", "usb": { "device_version": "0.0.3" - } + }, + "processor": "STM32F401", + "bootloader": "stm32-dfu", + "board": "BLACKPILL_STM32_F401" } diff --git a/keyboards/handwired/uthol/rev3/rules.mk b/keyboards/handwired/uthol/rev3/rules.mk index 8752bb87eb..2eaa722497 100644 --- a/keyboards/handwired/uthol/rev3/rules.mk +++ b/keyboards/handwired/uthol/rev3/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F401 -BOARD = BLACKPILL_STM32_F401 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/videowriter/config.h b/keyboards/handwired/videowriter/config.h index 8bb4835e3d..b519d82153 100644 --- a/keyboards/handwired/videowriter/config.h +++ b/keyboards/handwired/videowriter/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 10 -#define MATRIX_COLS 8 /* * Keyboard Matrix Assignments @@ -39,17 +34,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Uncomment this if you didn't install diodes */ -//#define MATRIX_HAS_GHOST - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 1 -#define BOOTMAGIC_LITE_COLUMN 7 diff --git a/keyboards/handwired/videowriter/info.json b/keyboards/handwired/videowriter/info.json index 23f8b712e5..329085fe85 100644 --- a/keyboards/handwired/videowriter/info.json +++ b/keyboards/handwired/videowriter/info.json @@ -8,6 +8,11 @@ "pid": "0x5657", "device_version": "0.0.1" }, + "bootmagic": { + "matrix": [1, 7] + }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/videowriter/rules.mk b/keyboards/handwired/videowriter/rules.mk index f5c8a1405b..6e0404820c 100644 --- a/keyboards/handwired/videowriter/rules.mk +++ b/keyboards/handwired/videowriter/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/wabi/config.h b/keyboards/handwired/wabi/config.h index f78413445a..69da1bc47c 100644 --- a/keyboards/handwired/wabi/config.h +++ b/keyboards/handwired/wabi/config.h @@ -14,12 +14,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ - -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 /* * Keyboard Matrix Assignments @@ -39,14 +33,7 @@ diode) /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/wabi/info.json b/keyboards/handwired/wabi/info.json index 624bc739f2..a93666554d 100644 --- a/keyboards/handwired/wabi/info.json +++ b/keyboards/handwired/wabi/info.json @@ -8,6 +8,8 @@ "pid": "0xB07D", "device_version": "0.0.2" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [{"label":"Esc", "x":1.25, "y":0}, {"label":"1", "x":2.25, "y":0}, {"label":"2", "x":3.25, "y":0}, {"label":"3", "x":4.25, "y":0}, {"label":"4", "x":5.25, "y":0}, {"label":"5", "x":6.25, "y":0}, {"label":"6", "x":8.75, "y":0}, {"label":"7", "x":9.75, "y":0}, {"label":"8", "x":10.75, "y":0}, {"label":"9", "x":11.75, "y":0}, {"label":"0", "x":12.75, "y":0}, {"label":"-", "x":13.75, "y":0}, {"label":"=", "x":14.75, "y":0}, {"label":"Backspace", "x":15.75, "y":0, "w":2}, {"label":"Tab", "x":0.75, "y":1, "w":1.5}, {"label":"Q", "x":2.25, "y":1}, {"label":"W", "x":3.25, "y":1}, {"label":"E", "x":4.25, "y":1}, {"label":"R", "x":5.25, "y":1}, {"label":"T", "x":6.25, "y":1}, {"label":"Y", "x":8.75, "y":1}, {"label":"U", "x":9.75, "y":1}, {"label":"I", "x":10.75, "y":1}, {"label":"O", "x":11.75, "y":1}, {"label":"P", "x":12.75, "y":1}, {"label":"[", "x":13.75, "y":1}, {"label":"]", "x":14.75, "y":1}, {"label":"\\", "x":15.75, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0.5, "y":2, "w":1.75}, {"label":"A", "x":2.25, "y":2}, {"label":"S", "x":3.25, "y":2}, {"label":"D", "x":4.25, "y":2}, {"label":"F", "x":5.25, "y":2}, {"label":"G", "x":6.25, "y":2}, {"label":"H", "x":8.75, "y":2}, {"label":"J", "x":9.75, "y":2}, {"label":"K", "x":10.75, "y":2}, {"label":"L", "x":11.75, "y":2}, {"label":";", "x":12.75, "y":2}, {"label":"'", "x":13.75, "y":2}, {"label":"Enter", "x":14.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":8.75, "y":3}, {"label":"M", "x":9.75, "y":3}, {"label":",", "x":10.75, "y":3}, {"label":".", "x":11.75, "y":3}, {"label":"/", "x":12.75, "y":3}, {"label":"Shift", "x":13.75, "y":3, "w":2.75}, {"label":"Up", "x":16.5, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":4, "y":4, "w":1.25}, {"label":"Space", "x":5.25, "y":4}, {"label":"Page Down", "x":6.25, "y":4, "w":1.25}, {"label":"Enter", "x":8.5, "y":4, "w":1.25}, {"label":"Space", "x":9.75, "y":4}, {"label":"Backspace", "x":10.75, "y":4, "w":1.25}, {"label":"Left", "x":15.5, "y":4}, {"label":"Down", "x":16.5, "y":4}, {"label":"Right", "x":17.5, "y":4}] } diff --git a/keyboards/handwired/wabi/rules.mk b/keyboards/handwired/wabi/rules.mk index 354f194ca2..309e55c9f4 100644 --- a/keyboards/handwired/wabi/rules.mk +++ b/keyboards/handwired/wabi/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/wakizashi40/info.json b/keyboards/handwired/wakizashi40/info.json index 12a17643a8..aac770596f 100644 --- a/keyboards/handwired/wakizashi40/info.json +++ b/keyboards/handwired/wakizashi40/info.json @@ -2,7 +2,6 @@ "manufacturer": "xia0", "keyboard_name": "Wakizashi 40", "maintainer": "xia0", - "debounce": 5, "processor": "atmega32u4", "bootloader": "atmel-dfu", "diode_direction": "COL2ROW", diff --git a/keyboards/handwired/woodpad/config.h b/keyboards/handwired/woodpad/config.h index 7113e15f39..4609f67ea7 100644 --- a/keyboards/handwired/woodpad/config.h +++ b/keyboards/handwired/woodpad/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 4 /* * Keyboard Matrix Assignments @@ -39,63 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_BREATHING -//#define BACKLIGHT_LEVELS 3 - -//#define RGB_DI_PIN E2 -//#ifdef RGB_DI_PIN -//# define RGBLED_NUM 16 -//# define RGBLIGHT_HUE_STEP 8 -//# define RGBLIGHT_SAT_STEP 8 -//# define RGBLIGHT_VAL_STEP 8 -//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -//#endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -111,7 +54,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/woodpad/info.json b/keyboards/handwired/woodpad/info.json index 3e82a0cc42..c31bca5e09 100644 --- a/keyboards/handwired/woodpad/info.json +++ b/keyboards/handwired/woodpad/info.json @@ -8,6 +8,9 @@ "pid": "0x6069", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", + "community_layouts": ["ortho_5x4"], "layouts": { "LAYOUT_ortho_5x4": { "layout": [ diff --git a/keyboards/handwired/woodpad/rules.mk b/keyboards/handwired/woodpad/rules.mk index 098286cbc1..fce764c22d 100644 --- a/keyboards/handwired/woodpad/rules.mk +++ b/keyboards/handwired/woodpad/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = ortho_5x4 diff --git a/keyboards/handwired/wulkan/config.h b/keyboards/handwired/wulkan/config.h index 3f35e214e4..36d848fc8b 100644 --- a/keyboards/handwired/wulkan/config.h +++ b/keyboards/handwired/wulkan/config.h @@ -1,17 +1,9 @@ #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 #define MATRIX_ROW_PINS { B8, A0, A1, A2 } #define MATRIX_COL_PINS { B13, B14, B15, B9, B7, B6, B5, B4, B3, B2, B1, B0 } #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - #define FORCE_NKRO diff --git a/keyboards/handwired/wulkan/info.json b/keyboards/handwired/wulkan/info.json index bef51cdb2b..09907a556b 100644 --- a/keyboards/handwired/wulkan/info.json +++ b/keyboards/handwired/wulkan/info.json @@ -8,6 +8,10 @@ "pid": "0x6060", "device_version": "0.0.1" }, + "processor": "STM32F303", + "bootloader": "stm32-dfu", + "board": "QMK_PROTON_C", + "community_layouts": ["ortho_4x12"], "layouts": { "LAYOUT_ortho_4x12": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}] diff --git a/keyboards/handwired/wulkan/keymaps/default/keymap.c b/keyboards/handwired/wulkan/keymaps/default/keymap.c index 2612c084fd..b73592760e 100644 --- a/keyboards/handwired/wulkan/keymaps/default/keymap.c +++ b/keyboards/handwired/wulkan/keymaps/default/keymap.c @@ -16,7 +16,7 @@ enum unicode_names { SE_ODIA_LOW, }; -const uint32_t PROGMEM unicode_map[] = { +const uint32_t unicode_map[] PROGMEM = { [SE_ARNG_HIGH] = 0x00C5, [SE_ADIA_HIGH] = 0x00C4, [SE_ODIA_HIGH] = 0x00D6, diff --git a/keyboards/handwired/wulkan/rules.mk b/keyboards/handwired/wulkan/rules.mk index f60cc5ea80..e664c34540 100644 --- a/keyboards/handwired/wulkan/rules.mk +++ b/keyboards/handwired/wulkan/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F303 -BOARD = QMK_PROTON_C - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # @@ -17,5 +10,4 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover AUDIO_ENABLE = no RGBLIGHT_ENABLE = no -LAYOUTS = ortho_4x12 NO_SUSPEND_POWER_DOWN = yes diff --git a/keyboards/handwired/xealous/config.h b/keyboards/handwired/xealous/config.h index 1d94be5a7e..7019bf461f 100644 --- a/keyboards/handwired/xealous/config.h +++ b/keyboards/handwired/xealous/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once -#include "config_common.h" #define USE_I2C #define SCL_CLOCK 800000UL diff --git a/keyboards/handwired/xealous/rev1/config.h b/keyboards/handwired/xealous/rev1/config.h index 40fe502340..17497c5ccd 100644 --- a/keyboards/handwired/xealous/rev1/config.h +++ b/keyboards/handwired/xealous/rev1/config.h @@ -18,12 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 10 -#define MATRIX_COLS 8 // wiring of each half // Ascii art of pro micro. Pin names PD3, PD2, etc. @@ -46,15 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { B5, B4, E6, D7, D4 } #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 } -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/xealous/rev1/info.json b/keyboards/handwired/xealous/rev1/info.json index 59865e9321..c470e72a16 100644 --- a/keyboards/handwired/xealous/rev1/info.json +++ b/keyboards/handwired/xealous/rev1/info.json @@ -8,6 +8,8 @@ "pid": "0x5141", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "caterina", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/xealous/rules.mk b/keyboards/handwired/xealous/rules.mk index 985ee385b9..5e9547ec9d 100644 --- a/keyboards/handwired/xealous/rules.mk +++ b/keyboards/handwired/xealous/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/z150/config.h b/keyboards/handwired/z150/config.h index 96bda8c8d8..8fc91281ca 100644 --- a/keyboards/handwired/z150/config.h +++ b/keyboards/handwired/z150/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 11 -#define MATRIX_COLS 8 #define MATRIX_ROW_PINS { B13, B14, B15, A8, A9, A3, A10, A1, A2, A15, A0 } #define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, A4 } @@ -33,33 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -75,7 +43,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/z150/info.json b/keyboards/handwired/z150/info.json index 823467b694..72796b314e 100644 --- a/keyboards/handwired/z150/info.json +++ b/keyboards/handwired/z150/info.json @@ -8,6 +8,8 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "processor": "STM32F103", + "bootloader": "stm32duino", "layouts": { "LAYOUT": { "layout": [{"label":"F1", "x":0, "y":0}, {"label":"F2", "x":1, "y":0}, {"label":"Esc", "x":2.5, "y":0}, {"label":"!", "x":3.5, "y":0}, {"label":"@", "x":4.5, "y":0}, {"label":"#", "x":5.5, "y":0}, {"label":"$", "x":6.5, "y":0}, {"label":"%", "x":7.5, "y":0}, {"label":"^", "x":8.5, "y":0}, {"label":"&", "x":9.5, "y":0}, {"label":"*", "x":10.5, "y":0}, {"label":"(", "x":11.5, "y":0}, {"label":")", "x":12.5, "y":0}, {"label":"_", "x":13.5, "y":0}, {"label":"+", "x":14.5, "y":0}, {"label":"Backspace", "x":15.5, "y":0, "w":1.75}, {"label":"", "x":17.25, "y":0}, {"label":"", "x":18.25, "y":0, "w":1.5}, {"label":"", "x":19.75, "y":0, "w":1.5}, {"label":"F3", "x":0, "y":1}, {"label":"F4", "x":1, "y":1}, {"label":"Tab", "x":2.5, "y":1, "w":1.5}, {"label":"Q", "x":4, "y":1}, {"label":"W", "x":5, "y":1}, {"label":"E", "x":6, "y":1}, {"label":"R", "x":7, "y":1}, {"label":"T", "x":8, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15, "y":1, "w":1.25}, {"label":"7", "x":17.25, "y":1}, {"label":"8", "x":18.25, "y":1}, {"label":"9", "x":19.25, "y":1}, {"label":"PrtSc", "x":20.25, "y":1}, {"label":"F5", "x":0, "y":2}, {"label":"F6", "x":1, "y":2}, {"label":"Ctrl", "x":2.5, "y":2, "w":1.75}, {"label":"A", "x":4.25, "y":2}, {"label":"S", "x":5.25, "y":2}, {"label":"D", "x":6.25, "y":2}, {"label":"F", "x":7.25, "y":2}, {"label":"G", "x":8.25, "y":2}, {"label":"H", "x":9.25, "y":2}, {"label":"J", "x":10.25, "y":2}, {"label":"K", "x":11.25, "y":2}, {"label":"L", "x":12.25, "y":2}, {"label":":", "x":13.25, "y":2}, {"label":"\"", "x":14.25, "y":2}, {"label":"Enter", "x":15.25, "y":2, "w":2}, {"label":"4", "x":17.25, "y":2}, {"label":"5", "x":18.25, "y":2}, {"label":"6", "x":19.25, "y":2}, {"label":"\u0432\u0402\u201c", "x":20.25, "y":2}, {"label":"F7", "x":0, "y":3}, {"label":"F8", "x":1, "y":3}, {"label":"Shift", "x":2.5, "y":3, "w":2.25}, {"label":"Z", "x":4.75, "y":3}, {"label":"X", "x":5.75, "y":3}, {"label":"C", "x":6.75, "y":3}, {"label":"V", "x":7.75, "y":3}, {"label":"B", "x":8.75, "y":3}, {"label":"N", "x":9.75, "y":3}, {"label":"M", "x":10.75, "y":3}, {"label":"<", "x":11.75, "y":3}, {"label":">", "x":12.75, "y":3}, {"label":"?", "x":13.75, "y":3}, {"label":"Shift", "x":14.75, "y":3, "w":1.5}, {"label":"|", "x":16.25, "y":3}, {"label":"1", "x":17.25, "y":3}, {"label":"2", "x":18.25, "y":3}, {"label":"6", "x":19.25, "y":3}, {"label":"+", "x":20.25, "y":3, "h":2}, {"label":"F9", "x":0, "y":4}, {"label":"F10", "x":1, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.75}, {"label":"~", "x":4.25, "y":4}, {"x":5.25, "y":4, "w":9}, {"label":"CapsLock", "x":14.25, "y":4, "w":2}, {"label":"0", "x":16.25, "y":4, "w":2}, {"label":".", "x":18.25, "y":4, "w":2}] diff --git a/keyboards/handwired/z150/rules.mk b/keyboards/handwired/z150/rules.mk index 99b0630157..8e7bef8b5c 100644 --- a/keyboards/handwired/z150/rules.mk +++ b/keyboards/handwired/z150/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = STM32F103 - -# Bootloader selection -BOOTLOADER = stm32duino - # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/handwired/zergo/config.h b/keyboards/handwired/zergo/config.h index 8453b8efc9..63666aa09f 100644 --- a/keyboards/handwired/zergo/config.h +++ b/keyboards/handwired/zergo/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 14 /* key matrix pins */ #define MATRIX_ROW_PINS { B1, D7, C3, D6, D5, D4 } @@ -29,7 +24,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - diff --git a/keyboards/handwired/zergo/info.json b/keyboards/handwired/zergo/info.json index cec0c8954d..7b9776134c 100644 --- a/keyboards/handwired/zergo/info.json +++ b/keyboards/handwired/zergo/info.json @@ -8,6 +8,8 @@ "pid": "0xB92B", "device_version": "0.0.1" }, + "processor": "at90usb1286", + "bootloader": "halfkay", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/handwired/zergo/rules.mk b/keyboards/handwired/zergo/rules.mk index ae614e0b6d..7d0adddded 100644 --- a/keyboards/handwired/zergo/rules.mk +++ b/keyboards/handwired/zergo/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -BOOTLOADER = halfkay - # Build Options # change yes to no to disable # |