diff options
Diffstat (limited to 'keyboards/handwired')
11 files changed, 141 insertions, 118 deletions
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h index 93ca121590..0e5b72c56b 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h @@ -24,7 +24,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS \ { A15, B3, B4, B5, B6, B7 } #define MATRIX_ROW_PINS \ - { B12, B13, B14, B15, A8, A9 } + { B12, B13, B14, B15, A8, A10 } + +#define UNUSED_PINS \ + { C15 } +// B2 used for BOOT1, has internal pull down? +// A9 has internal pull-down +// A11 and A12 are used for USB sense. DO NOT USE. #define DIODE_DIRECTION COL2ROW @@ -45,12 +51,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLED_SPLIT \ { 10, 10 } -#define DEBUG_LED_PIN C13 +#define DEBUG_LED_PIN C13 -#define AUDIO_PIN A0 -#define AUDIO_PWM_DRIVER PWMD5 -#define AUDIO_PWM_CHANNEL 1 -#define AUDIO_STATE_TIMER GPTD4 +/* Audio config */ +#define AUDIO_PIN B1 +#define AUDIO_PWM_DRIVER PWMD3 +#define AUDIO_PWM_CHANNEL 4 +#define AUDIO_PWM_PAL_MODE 2 +#define AUDIO_STATE_TIMER GPTD4 /* serial.c configuration for split keyboard */ #define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. @@ -60,10 +68,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 #define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 #define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100 -#undef SOFT_SERIAL_PIN - -// #define EE_HANDS +/* i2c config for oleds */ #define I2C_DRIVER I2CD1 #define I2C1_SCL_BANK GPIOB #define I2C1_SDA_BANK GPIOB @@ -73,11 +79,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define I2C1_SDA_PAL_MODE 4 #define I2C1_CLOCK_SPEED 400000 +/* encoder config */ #define ENCODERS_PAD_A \ - { B1 } + { A13 } #define ENCODERS_PAD_B \ - { B2 } + { A14 } +/* spi config for eeprom and pmw3360 sensor */ #define SPI_DRIVER SPID1 #define SPI_SCK_PIN A5 #define SPI_SCK_PAL_MODE 5 @@ -86,6 +94,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SPI_MISO_PIN A6 #define SPI_MISO_PAL_MODE 5 +/* eeprom config */ #define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4 #define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 // #define EXTERNAL_EEPROM_BYTE_COUNT 8196 @@ -93,6 +102,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define EXTERNAL_EEPROM_ADDRESS_SIZE 2 // #define DEBUG_EEPROM_OUTPUT +/* pmw3360 config */ #define PMW3360_CS_PIN B0 #define PMW3360_SPI_MODE 3 #define PMW3360_SPI_DIVISOR 4 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/halconf.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/halconf.h index 94f4aff83c..fb835e8ee2 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/halconf.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/halconf.h @@ -15,7 +15,6 @@ */ #pragma once -// #define HAL_USE_DAC TRUE #define HAL_USE_PWM TRUE #define HAL_USE_SERIAL TRUE #define HAL_USE_I2C TRUE diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h index 0f58208ccb..053f0aa517 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h @@ -24,11 +24,14 @@ #undef STM32_PWM_USE_TIM5 #define STM32_PWM_USE_TIM5 TRUE -#undef STM32_GPT_USE_TIM4 -#define STM32_GPT_USE_TIM4 TRUE +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE #undef STM32_SPI_USE_SPI1 #define STM32_SPI_USE_SPI1 TRUE #undef STM32_SERIAL_USE_USART2 #define STM32_SERIAL_USE_USART2 TRUE + +#undef STM32_GPT_USE_TIM4 +#define STM32_GPT_USE_TIM4 TRUE diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md new file mode 100644 index 0000000000..4571e18045 --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md @@ -0,0 +1,24 @@ +# Drashna's Blackpill Tractyl Manuform (5x6) with a right side trackball + +* VBUS mod, using PB10 +* Split Hand Pin, using PC14 +* Full Duplex Serial/USART using PA3 and PA4 on USART2 +* PWM Audio using PB1 and TIM3 and GPT on TIM4 +* PWM RGB using PA1 TIM5 +* pmw3360 sensor sharing PA5-PA7 on SPI1, with B0 as CS pin +* 8KB SPI EEPROM chip sharing PA5-PA7 on SPI1 with PA4 as CS pin +* Encoder using PA10 and PA12 +* SSD1306 OLED display (128x64) using PB8-PB9 on I2C1 + +* Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna) +* Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/) + +Make example for this keyboard (after setting up your build environment): + + make handwired/tractyl_manuform/5x6_right/f411:default + +Flashing example for this keyboard: + + make handwired/tractyl_manuform/5x6_right/f411:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c index ac4999161b..81de8b2894 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c +++ b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c @@ -142,8 +142,14 @@ const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = { [_LOWER] = { { RGB_MOD, RGB_RMOD}, { RGB_HUD, RGB_HUI } }, [_ADJUST] = { { CK_DOWN, CK_UP }, { _______, _______ } }, }; +// clang-format on #else bool encoder_update_user(uint8_t index, bool clockwise) { +# ifdef SWAP_HANDS_ENABLE + if (swap_hands) { + index ^= 1; + } +# endif if (index == 0) { tap_code_delay(clockwise ? KC_VOLD : KC_VOLU, 5); } else if (index == 1) { @@ -152,7 +158,6 @@ bool encoder_update_user(uint8_t index, bool clockwise) { return false; } #endif -// clang-format on #ifdef POINTING_DEVICE_ENABLE static uint16_t mouse_timer = 0; diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/rules.mk b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/rules.mk index b123ce1a85..9b9032837e 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/rules.mk +++ b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/rules.mk @@ -5,7 +5,7 @@ HAPTIC_ENABLE = no COMMAND_ENABLE = no TAP_DANCE_ENABLE = yes UNICODE_ENABLE = yes -OLED_ENABLE = yes +OLED_ENABLE = yes WPM_ENABLE = yes ENCODER_ENABLE = yes ENCODER_MAP_ENABLE = yes diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/readme.md index b6e38dc845..bfb142347c 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/readme.md +++ b/keyboards/handwired/tractyl_manuform/5x6_right/readme.md @@ -1,8 +1,8 @@ -# Drashna's Dactyl Manuform (5x6) with a right side trackball +# Drashna's Tractyl Manuform (5x6) with a right side trackball  -It's a Dactyl Manuform with an integrated thumb based trackball, using the pmw3360 optical sensor. +It's a Tractyl Manuform with an integrated thumb based trackball, using the pmw3360 optical sensor. It's powered by 2x Teensy++ 2.0's, using Drashna's [Teensy VBUS Hack](https://docs.qmk.fm/#/feature_split_keyboard?id=hardware-considerations-and-mods) for better detection. @@ -12,10 +12,10 @@ It's powered by 2x Teensy++ 2.0's, using Drashna's [Teensy VBUS Hack](https://do Make example for this keyboard (after setting up your build environment): - make handwired/dactyl_manuform/5x6_right_trackball:default + make handwired/tractyl_manuform/5x6_right:default Flashing example for this keyboard: - make handwired/dactyl_manuform/5x6_right_trackball:default:flash + make handwired/tractyl_manuform/5x6_right:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/tractyl_manuform/post_config.h b/keyboards/handwired/tractyl_manuform/post_config.h index 147e928735..c48518ddd3 100644 --- a/keyboards/handwired/tractyl_manuform/post_config.h +++ b/keyboards/handwired/tractyl_manuform/post_config.h @@ -19,6 +19,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once // mouse config +#ifdef MOUSEKEY_ENABLE # ifndef MOUSEKEY_MOVE_DELTA # ifndef MK_KINETIC_SPEED # define MOUSEKEY_MOVE_DELTA 5 @@ -59,7 +60,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define MOUSEKEY_ACCELERATED_SPEED 3000 # endif - // mouse scroll config # ifndef MOUSEKEY_WHEEL_DELAY # define MOUSEKEY_WHEEL_DELAY 15 @@ -89,7 +89,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # ifndef MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS # define MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS 8 # endif - +#endif #ifndef DEBOUNCE # define DEBOUNCE 5 diff --git a/keyboards/handwired/tractyl_manuform/tm_sync.c b/keyboards/handwired/tractyl_manuform/tm_sync.c index 2a8847b3ef..1cb3549469 100644 --- a/keyboards/handwired/tractyl_manuform/tm_sync.c +++ b/keyboards/handwired/tractyl_manuform/tm_sync.c @@ -20,43 +20,40 @@ #include "drivers/sensors/pmw3360.h" kb_config_data_t kb_config; -kb_pointer_data_t kb_pointer; +kb_mouse_report_t sync_mouse_report; + +void kb_pointer_sync_handler(uint8_t initiator2target_buffer_size, const void* initiator2target_buffer, uint8_t target2initiator_buffer_size, void* target2initiator_buffer) { + if (target2initiator_buffer_size == sizeof(sync_mouse_report)) { + memcpy(target2initiator_buffer, &sync_mouse_report, sizeof(sync_mouse_report)); + } + sync_mouse_report.x = 0; + sync_mouse_report.y = 0; +} void kb_config_sync_handler(uint8_t initiator2target_buffer_size, const void* initiator2target_buffer, uint8_t target2initiator_buffer_size, void* target2initiator_buffer) { if (initiator2target_buffer_size == sizeof(kb_config)) { memcpy(&kb_config, initiator2target_buffer, sizeof(kb_config)); } -} -void kb_pointer_sync_handler(uint8_t initiator2target_buffer_size, const void* initiator2target_buffer, uint8_t target2initiator_buffer_size, void* target2initiator_buffer) { - if (target2initiator_buffer_size == sizeof(kb_pointer)) { - memcpy(target2initiator_buffer, &kb_pointer, sizeof(kb_pointer)); + + static uint16_t cpi = 0; + // Check if the state values are different + if (cpi != kb_config.device_cpi) { + cpi = kb_config.device_cpi; } } void keyboard_pre_init_sync(void) { memset(&kb_config, 0, sizeof(kb_config)); - memset(&kb_pointer, 0, sizeof(kb_pointer)); + memset(&sync_mouse_report, 0, sizeof(sync_mouse_report)); } -void keyboard_post_init_kb(void) { +void keyboard_post_init_sync(void) { // Register keyboard state sync split transaction transaction_register_rpc(RPC_ID_KB_CONFIG_SYNC, kb_config_sync_handler); transaction_register_rpc(RPC_ID_POINTER_STATE_SYNC, kb_pointer_sync_handler); - - keyboard_post_init_user(); } -void kb_config_update(void) { - if (is_keyboard_master()) { - static uint16_t cpi = 0; - if (cpi != kb_config.device_cpi) { - cpi = kb_config.device_cpi; - pmw_set_cpi(cpi); - } - } -} - -void kb_config_sync(void) { +void housekeeping_task_sync(void) { if (is_keyboard_master()) { // Keep track of the last state, so that we can tell if we need to propagate to slave static kb_config_data_t last_kb_config; @@ -82,35 +79,6 @@ void kb_config_sync(void) { } } -void kb_pointer_sync(void) { - if (is_keyboard_master() && is_keyboard_left()) { - // Keep track of the last state, so that we can tell if we need to propagate to slave - static uint32_t last_sync = 0; - - // Perform the sync if requested - if (timer_elapsed32(last_sync) >= 5) { - if (transaction_rpc_recv(RPC_ID_POINTER_STATE_SYNC, sizeof(kb_pointer), &kb_pointer)) { - last_sync = timer_read32(); - } - } - } -} - -void housekeeping_task_kb(void) { - // Update kb_config so we can send to slave - kb_config_update(); - // Data sync from master to slave - kb_config_sync(); - kb_pointer_sync(); -} - -void kb_pointer_sync_send(int8_t x, int8_t y) { - kb_pointer.mouse_x = x; - kb_pointer.mouse_y = y; -} - -kb_pointer_data_t kb_pointer_sync_get(void) { return (kb_pointer_data_t){.mouse_x = kb_pointer.mouse_x, .mouse_y = kb_pointer.mouse_y}; } - void trackball_set_cpi(uint16_t cpi) { kb_config.device_cpi = cpi; if (!is_keyboard_left()) { diff --git a/keyboards/handwired/tractyl_manuform/tractyl_manuform.c b/keyboards/handwired/tractyl_manuform/tractyl_manuform.c index aafa343051..d851528ffb 100644 --- a/keyboards/handwired/tractyl_manuform/tractyl_manuform.c +++ b/keyboards/handwired/tractyl_manuform/tractyl_manuform.c @@ -34,23 +34,21 @@ keyboard_config_t keyboard_config; uint16_t dpi_array[] = TRACKBALL_DPI_OPTIONS; #define DPI_OPTION_SIZE (sizeof(dpi_array) / sizeof(uint16_t)) -bool BurstState = false; // init burst state for Trackball module -uint16_t MotionStart = 0; // Timer for accel, 0 is resting state +bool BurstState = false; // init burst state for Trackball module +uint16_t MotionStart = 0; // Timer for accel, 0 is resting state __attribute__((weak)) void process_mouse_user(report_mouse_t* mouse_report, int8_t x, int8_t y) { mouse_report->x = x; mouse_report->y = y; } -__attribute__((weak)) kb_pointer_data_t process_mouse(void) { - kb_pointer_data_t temp_data = {.mouse_x = 0, .mouse_y = 0}; - +__attribute__((weak)) void process_mouse(void) { report_pmw_t data = pmw_read_burst(); - // Reset timer if stopped moving - if (!data.isMotion) { - if (MotionStart != 0) MotionStart = 0; - return temp_data; - } + // Reset timer if stopped moving + if (!data.isMotion) { + if (MotionStart != 0) MotionStart = 0; + return; + } if (data.isOnSurface) { // Set timer if new motion @@ -59,8 +57,12 @@ __attribute__((weak)) kb_pointer_data_t process_mouse(void) { MotionStart = timer_read(); } - if (debug_mouse) { dprintf("Delt] d: %d t: %u\n", abs(data.dx) + abs(data.dy), MotionStart); } - if (debug_mouse) { dprintf("Pre ] X: %d, Y: %d\n", data.dx, data.dy); } + if (debug_mouse) { + dprintf("Delt] d: %d t: %u\n", abs(data.dx) + abs(data.dy), MotionStart); + } + if (debug_mouse) { + dprintf("Pre ] X: %d, Y: %d\n", data.dx, data.dy); + } #if defined(PROFILE_LINEAR) float scale = float(timer_elaspsed(MotionStart)) / 1000.0; data.dx *= scale; @@ -77,14 +79,15 @@ __attribute__((weak)) kb_pointer_data_t process_mouse(void) { if (debug_mouse) dprintf("Cons] X: %d, Y: %d\n", data.dx, data.dy); // dprintf("Elapsed:%u, X: %f Y: %\n", i, pgm_read_byte(firmware_data+i)); - temp_data.mouse_x = -data.dx; - temp_data.mouse_y = data.dy; + sync_mouse_report.x = -data.dx; + sync_mouse_report.y = data.dy; } - return temp_data; } bool process_record_kb(uint16_t keycode, keyrecord_t* record) { - if (!process_record_user(keycode, record)) { return false; } + if (!process_record_user(keycode, record)) { + return false; + } #ifdef POINTING_DEVICE_ENABLE if (keycode == DPI_CONFIG && record->event.pressed) { @@ -119,29 +122,28 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) { return true; } __attribute__((weak)) void keyboard_pre_init_sync(void) {} - -// Hardware Setup -void keyboard_pre_init_kb(void) { +void keyboard_pre_init_kb(void) { // debug_enable = true; // debug_matrix = true; // debug_mouse = true; // debug_encoder = true; - /* Ground all output pins connected to ground. This provides additional - * pathways to ground. If you're messing with this, know this: driving ANY - * of these pins high will cause a short. On the MCU. Ka-blooey. - */ - // This is the debug LED. #if defined(DEBUG_LED_PIN) setPinOutput(DEBUG_LED_PIN); - writePin(DEBUG_LED_PIN, debug_enable); + writePin(DEBUG_LED_PIN, !debug_enable); #endif keyboard_pre_init_sync(); keyboard_pre_init_user(); } +__attribute__((weak)) void keyboard_post_init_sync(void) {} +void keyboard_post_init_kb(void) { + keyboard_post_init_sync(); + keyboard_post_init_user(); +} + #ifdef POINTING_DEVICE_ENABLE void pointing_device_init(void) { if (!is_keyboard_left()) { @@ -153,18 +155,18 @@ void pointing_device_init(void) { void pointing_device_task(void) { report_mouse_t mouse_report = pointing_device_get_report(); - kb_pointer_data_t data = {.mouse_x = mouse_report.x, .mouse_y = mouse_report.y}; + if (is_keyboard_left()) { if (is_keyboard_master()) { - data = kb_pointer_sync_get(); - process_mouse_user(&mouse_report, data.mouse_x, data.mouse_y); + transaction_rpc_recv(RPC_ID_POINTER_STATE_SYNC, sizeof(sync_mouse_report), &sync_mouse_report); + process_mouse_user(&mouse_report, sync_mouse_report.x, sync_mouse_report.y); } } else { - data = process_mouse(); - if (!is_keyboard_master()) { - kb_pointer_sync_send(data.mouse_x, data.mouse_y); - } else { - process_mouse_user(&mouse_report, data.mouse_x, data.mouse_y); + process_mouse(); + if (is_keyboard_master()) { + process_mouse_user(&mouse_report, sync_mouse_report.x, sync_mouse_report.y); + sync_mouse_report.x = 0; + sync_mouse_report.y = 0; } } @@ -183,11 +185,13 @@ void eeconfig_init_kb(void) { } __attribute__((weak)) void matrix_init_sub_kb(void) {} -void matrix_init_kb(void) { +void matrix_init_kb(void) { // is safe to just read DPI setting since matrix init // comes before pointing device init. keyboard_config.raw = eeconfig_read_kb(); - if (keyboard_config.dpi_config > DPI_OPTION_SIZE) { eeconfig_init_kb(); } + if (keyboard_config.dpi_config > DPI_OPTION_SIZE) { + eeconfig_init_kb(); + } matrix_init_sub_kb(); matrix_init_user(); } @@ -198,6 +202,12 @@ void matrix_scan_kb(void) { matrix_scan_user(); } +__attribute__((weak)) void housekeeping_task_sync(void) {} +void housekeeping_task_kb(void) { + housekeeping_task_sync(); + // no need for user function, is called already +} + #ifdef POINTING_DEVICE_ENABLE void matrix_power_up(void) { pointing_device_task(); } #endif diff --git a/keyboards/handwired/tractyl_manuform/tractyl_manuform.h b/keyboards/handwired/tractyl_manuform/tractyl_manuform.h index 99f1481ad8..f6a6c07520 100644 --- a/keyboards/handwired/tractyl_manuform/tractyl_manuform.h +++ b/keyboards/handwired/tractyl_manuform/tractyl_manuform.h @@ -40,18 +40,22 @@ enum ploopy_keycodes { }; typedef struct { - uint16_t device_cpi; + uint16_t device_cpi; } kb_config_data_t; __attribute__((aligned(16))) typedef struct { - int8_t mouse_x; - int8_t mouse_y; -} kb_pointer_data_t; - -kb_pointer_data_t process_mouse(void); -void process_mouse_user(report_mouse_t* mouse_report, int8_t x, int8_t y); -void kb_pointer_sync_send(int8_t x, int8_t y); -kb_pointer_data_t kb_pointer_sync_get(void); -void trackball_set_cpi(uint16_t cpi); -void matrix_init_sub_kb(void); -void matrix_scan_sub_kb(void); + int8_t x; + int8_t y; +} kb_mouse_report_t; + +extern kb_mouse_report_t sync_mouse_report; + +void process_mouse(void); +void process_mouse_user(report_mouse_t* mouse_report, int8_t x, int8_t y); +void trackball_set_cpi(uint16_t cpi); +void matrix_init_sub_kb(void); +void matrix_scan_sub_kb(void); + +void keyboard_pre_init_sync(void); +void keyboard_post_init_sync(void); +void housekeeping_task_sync(void); |