3 files changed, 2 insertions, 42 deletions
diff --git a/keyboards/handwired/z150/config.h b/keyboards/handwired/z150/config.h
index 96bda8c8d8..8fc91281ca 100644
--- a/keyboards/handwired/z150/config.h
+++ b/keyboards/handwired/z150/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 11
-#define MATRIX_COLS 8
 
 #define MATRIX_ROW_PINS { B13, B14, B15, A8, A9, A3, A10, A1, A2, A15, A0 }
 #define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, A4 }
@@ -33,33 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -75,7 +43,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/handwired/z150/info.json b/keyboards/handwired/z150/info.json
index 823467b694..72796b314e 100644
--- a/keyboards/handwired/z150/info.json
+++ b/keyboards/handwired/z150/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0000",
         "device_version": "0.0.1"
     },
+    "processor": "STM32F103",
+    "bootloader": "stm32duino",
     "layouts": {
         "LAYOUT": {
             "layout": [{"label":"F1", "x":0, "y":0}, {"label":"F2", "x":1, "y":0}, {"label":"Esc", "x":2.5, "y":0}, {"label":"!", "x":3.5, "y":0}, {"label":"@", "x":4.5, "y":0}, {"label":"#", "x":5.5, "y":0}, {"label":"$", "x":6.5, "y":0}, {"label":"%", "x":7.5, "y":0}, {"label":"^", "x":8.5, "y":0}, {"label":"&", "x":9.5, "y":0}, {"label":"*", "x":10.5, "y":0}, {"label":"(", "x":11.5, "y":0}, {"label":")", "x":12.5, "y":0}, {"label":"_", "x":13.5, "y":0}, {"label":"+", "x":14.5, "y":0}, {"label":"Backspace", "x":15.5, "y":0, "w":1.75}, {"label":"", "x":17.25, "y":0}, {"label":"", "x":18.25, "y":0, "w":1.5}, {"label":"", "x":19.75, "y":0, "w":1.5}, {"label":"F3", "x":0, "y":1}, {"label":"F4", "x":1, "y":1}, {"label":"Tab", "x":2.5, "y":1, "w":1.5}, {"label":"Q", "x":4, "y":1}, {"label":"W", "x":5, "y":1}, {"label":"E", "x":6, "y":1}, {"label":"R", "x":7, "y":1}, {"label":"T", "x":8, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15, "y":1, "w":1.25}, {"label":"7", "x":17.25, "y":1}, {"label":"8", "x":18.25, "y":1}, {"label":"9", "x":19.25, "y":1}, {"label":"PrtSc", "x":20.25, "y":1}, {"label":"F5", "x":0, "y":2}, {"label":"F6", "x":1, "y":2}, {"label":"Ctrl", "x":2.5, "y":2, "w":1.75}, {"label":"A", "x":4.25, "y":2}, {"label":"S", "x":5.25, "y":2}, {"label":"D", "x":6.25, "y":2}, {"label":"F", "x":7.25, "y":2}, {"label":"G", "x":8.25, "y":2}, {"label":"H", "x":9.25, "y":2}, {"label":"J", "x":10.25, "y":2}, {"label":"K", "x":11.25, "y":2}, {"label":"L", "x":12.25, "y":2}, {"label":":", "x":13.25, "y":2}, {"label":"\"", "x":14.25, "y":2}, {"label":"Enter", "x":15.25, "y":2, "w":2}, {"label":"4", "x":17.25, "y":2}, {"label":"5", "x":18.25, "y":2}, {"label":"6", "x":19.25, "y":2}, {"label":"\u0432\u0402\u201c", "x":20.25, "y":2}, {"label":"F7", "x":0, "y":3}, {"label":"F8", "x":1, "y":3}, {"label":"Shift", "x":2.5, "y":3, "w":2.25}, {"label":"Z", "x":4.75, "y":3}, {"label":"X", "x":5.75, "y":3}, {"label":"C", "x":6.75, "y":3}, {"label":"V", "x":7.75, "y":3}, {"label":"B", "x":8.75, "y":3}, {"label":"N", "x":9.75, "y":3}, {"label":"M", "x":10.75, "y":3}, {"label":"<", "x":11.75, "y":3}, {"label":">", "x":12.75, "y":3}, {"label":"?", "x":13.75, "y":3}, {"label":"Shift", "x":14.75, "y":3, "w":1.5}, {"label":"|", "x":16.25, "y":3}, {"label":"1", "x":17.25, "y":3}, {"label":"2", "x":18.25, "y":3}, {"label":"6", "x":19.25, "y":3}, {"label":"+", "x":20.25, "y":3, "h":2}, {"label":"F9", "x":0, "y":4}, {"label":"F10", "x":1, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.75}, {"label":"~", "x":4.25, "y":4}, {"x":5.25, "y":4, "w":9}, {"label":"CapsLock", "x":14.25, "y":4, "w":2}, {"label":"0", "x":16.25, "y":4, "w":2}, {"label":".", "x":18.25, "y":4, "w":2}]
diff --git a/keyboards/handwired/z150/rules.mk b/keyboards/handwired/z150/rules.mk
index 99b0630157..8e7bef8b5c 100644
--- a/keyboards/handwired/z150/rules.mk
+++ b/keyboards/handwired/z150/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = STM32F103
-
-# Bootloader selection
-BOOTLOADER = stm32duino
-
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE