3 files changed, 2 insertions, 40 deletions
diff --git a/keyboards/handwired/terminus_mini/config.h b/keyboards/handwired/terminus_mini/config.h
index 4dec0f1341..38b9d56268 100644
--- a/keyboards/handwired/terminus_mini/config.h
+++ b/keyboards/handwired/terminus_mini/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 4
@@ -38,10 +37,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
- 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
 
 //define tapping-toggle count
 #define TAPPING_TOGGLE 1
@@ -49,41 +44,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //define maximum duration of hold required to register a tap vs hold default is 200
 #define TAPPING_TERM 150 //reduce time required to register a held key
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * rules.mk for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/handwired/terminus_mini/info.json b/keyboards/handwired/terminus_mini/info.json
index 79cbe720a3..c059e9af7e 100644
--- a/keyboards/handwired/terminus_mini/info.json
+++ b/keyboards/handwired/terminus_mini/info.json
@@ -8,6 +8,8 @@
     "pid": "0x6060",
     "device_version": "0.0.1"
   },
+  "processor": "atmega32u4",
+  "bootloader": "halfkay",
   "layouts": {
     "LAYOUT": {
       "layout": [
diff --git a/keyboards/handwired/terminus_mini/rules.mk b/keyboards/handwired/terminus_mini/rules.mk
index 8121b44ca7..304b8ba7b9 100644
--- a/keyboards/handwired/terminus_mini/rules.mk
+++ b/keyboards/handwired/terminus_mini/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = halfkay
-
 # Build Options
 #   change yes to no to disable
 #