summaryrefslogtreecommitdiff
path: root/keyboards/handwired/tennie
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/handwired/tennie')
-rw-r--r--keyboards/handwired/tennie/config.h51
-rw-r--r--keyboards/handwired/tennie/info.json2
-rw-r--r--keyboards/handwired/tennie/rules.mk6
3 files changed, 2 insertions, 57 deletions
diff --git a/keyboards/handwired/tennie/config.h b/keyboards/handwired/tennie/config.h
index 9998e313f5..71a51554f2 100644
--- a/keyboards/handwired/tennie/config.h
+++ b/keyboards/handwired/tennie/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 3
-#define MATRIX_COLS 4
/*
* Keyboard Matrix Assignments
@@ -39,14 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
#define RGBW
#define RGB_DI_PIN D1
#ifdef RGB_DI_PIN
@@ -68,45 +55,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_TWINKLE
#endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -122,7 +75,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/handwired/tennie/info.json b/keyboards/handwired/tennie/info.json
index 4a810d84d9..f2a8bcc1f9 100644
--- a/keyboards/handwired/tennie/info.json
+++ b/keyboards/handwired/tennie/info.json
@@ -8,6 +8,8 @@
"pid": "0x1313",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "caterina",
"layouts": {
"LAYOUT": {
"layout": [{"x":0.5, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0.5, "y":2}, {"x":1.5, "y":2}, {"x":2.5, "y":2}]
diff --git a/keyboards/handwired/tennie/rules.mk b/keyboards/handwired/tennie/rules.mk
index b619ca4952..477ce541fd 100644
--- a/keyboards/handwired/tennie/rules.mk
+++ b/keyboards/handwired/tennie/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
# Build Options
# change yes to no to disable
#