summaryrefslogtreecommitdiff
path: root/keyboards/handwired/snatchpad
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/handwired/snatchpad')
-rw-r--r--keyboards/handwired/snatchpad/config.h48
-rw-r--r--keyboards/handwired/snatchpad/info.json2
-rw-r--r--keyboards/handwired/snatchpad/rules.mk6
3 files changed, 2 insertions, 54 deletions
diff --git a/keyboards/handwired/snatchpad/config.h b/keyboards/handwired/snatchpad/config.h
index 2d4f9ca2b4..3039ea2aae 100644
--- a/keyboards/handwired/snatchpad/config.h
+++ b/keyboards/handwired/snatchpad/config.h
@@ -3,7 +3,6 @@
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 3
@@ -30,23 +29,12 @@
#define ENCODERS_PAD_A { D3, D0 }
#define ENCODERS_PAD_B { D2, D1 }
-
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
//#define LED_NUM_LOCK_PIN B0
//#define LED_CAPS_LOCK_PIN B1
//#define LED_SCROLL_LOCK_PIN B2
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
@@ -63,43 +51,11 @@
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -115,7 +71,3 @@
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/handwired/snatchpad/info.json b/keyboards/handwired/snatchpad/info.json
index 22840d7352..da0221f474 100644
--- a/keyboards/handwired/snatchpad/info.json
+++ b/keyboards/handwired/snatchpad/info.json
@@ -8,6 +8,8 @@
"pid": "0x7370",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
"layouts": {
"LAYOUT": {
"layout": [
diff --git a/keyboards/handwired/snatchpad/rules.mk b/keyboards/handwired/snatchpad/rules.mk
index 7c73773c0d..74f5b93cb9 100644
--- a/keyboards/handwired/snatchpad/rules.mk
+++ b/keyboards/handwired/snatchpad/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#