diff options
Diffstat (limited to 'keyboards/handwired/downbubble/config.h')
| -rw-r--r-- | keyboards/handwired/downbubble/config.h | 240 |
1 files changed, 0 insertions, 240 deletions
diff --git a/keyboards/handwired/downbubble/config.h b/keyboards/handwired/downbubble/config.h deleted file mode 100644 index f2628cb706..0000000000 --- a/keyboards/handwired/downbubble/config.h +++ /dev/null @@ -1,240 +0,0 @@ -/* -Copyright 2018 Don Chiou - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Flehrad -#define PRODUCT downbubble -#define DESCRIPTION An Ergonomic Centered Numpad Keyboard - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 20 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F1, F2, F3, F4, F5, F6 } -#define MATRIX_COL_PINS { F7, C7, C6, C5, C4, C3, C2, C1, C0, E1, E0, D7, D6, D5, D4, D3, D2, D1, D0, B7 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== all animations enable ==*/ -// #define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 |