summaryrefslogtreecommitdiff
path: root/keyboards/handwired/cmd60
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/handwired/cmd60')
-rw-r--r--keyboards/handwired/cmd60/config.h34
-rw-r--r--keyboards/handwired/cmd60/info.json2
-rw-r--r--keyboards/handwired/cmd60/rules.mk6
3 files changed, 2 insertions, 40 deletions
diff --git a/keyboards/handwired/cmd60/config.h b/keyboards/handwired/cmd60/config.h
index 433aabc5b7..fccbb0f95e 100644
--- a/keyboards/handwired/cmd60/config.h
+++ b/keyboards/handwired/cmd60/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 5
@@ -39,45 +38,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
diff --git a/keyboards/handwired/cmd60/info.json b/keyboards/handwired/cmd60/info.json
index 077fdbce67..635bead900 100644
--- a/keyboards/handwired/cmd60/info.json
+++ b/keyboards/handwired/cmd60/info.json
@@ -8,6 +8,8 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "halfkay",
"layouts": {
"LAYOUT": {
"layout": [
diff --git a/keyboards/handwired/cmd60/rules.mk b/keyboards/handwired/cmd60/rules.mk
index 9b2c210d42..b6e2a5f9a4 100644
--- a/keyboards/handwired/cmd60/rules.mk
+++ b/keyboards/handwired/cmd60/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = halfkay
-
# Build Options
# change yes to no to disable
#