diff options
Diffstat (limited to 'keyboards/handwired/3dortho14u/readme.md')
-rw-r--r-- | keyboards/handwired/3dortho14u/readme.md | 40 |
1 files changed, 40 insertions, 0 deletions
diff --git a/keyboards/handwired/3dortho14u/readme.md b/keyboards/handwired/3dortho14u/readme.md new file mode 100644 index 0000000000..3163891d48 --- /dev/null +++ b/keyboards/handwired/3dortho14u/readme.md @@ -0,0 +1,40 @@ +# 3dortho14u + +![3dortho14u](https://i.imgur.com/us16LYTh.jpg) + +A symmetrical 14u wide ortholinear keyboard. + +In addition to the 3d printed parts and microcontroller, the following hardware is required: +* 8 * 12 mm M3 bolt +* Either: + * 8 * M3 muts and CA glue + OR + * 8 * 3x3 mm threaded insert +* Optional: + * USB daughter board + +--- + +* Keyboard Maintainer: [xia0](https://github.com/xia0) +* Hardware Supported: + * rev1: Teensy 2.0 (ATmega32u4) + * rev2: Arduino Pro Micro (ATmega32u4) +* Hardware Availability: [github](https://github.com/xia0/keeb_files/tree/main/3dortho14u) + +Make example for this keyboard (after setting up your build environment): + + make 3dortho14u/rev1:default + +Flashing example for this keyboard: + + make 3dortho14u/rev1:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available |