3 files changed, 2 insertions, 43 deletions
diff --git a/keyboards/hand88/config.h b/keyboards/hand88/config.h
index cb2c25cb8f..cdfd328c11 100755
--- a/keyboards/hand88/config.h
+++ b/keyboards/hand88/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 6
@@ -29,45 +28,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 /* Indicator LEDs */
 #define LED_CAPS_LOCK_PIN B6
 #define LED_PIN_ON_STATE 0
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/hand88/info.json b/keyboards/hand88/info.json
index 05cef0d06c..26390f614c 100755
--- a/keyboards/hand88/info.json
+++ b/keyboards/hand88/info.json
@@ -8,6 +8,8 @@
         "pid": "0x3838",
         "device_version": "0.0.1"
     },
+    "processor": "STM32F072",
+    "bootloader": "stm32-dfu",
     "layouts": {
         "LAYOUT_all": {
             "layout": [{"x":0, "y":0}, {"x":1.25, "y":0}, {"x":2.25, "y":0}, {"x":3.25, "y":0}, {"x":4.25, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.75, "y":0}, {"x":10.75, "y":0}, {"x":11.75, "y":0}, {"x":12.75, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":4, "y":1.25}, {"x":5, "y":1.25}, {"x":6, "y":1.25}, {"x":7, "y":1.25}, {"x":8, "y":1.25}, {"x":9, "y":1.25}, {"x":10, "y":1.25}, {"x":11, "y":1.25}, {"x":12, "y":1.25}, {"x":13, "y":1.25}, {"x":14, "y":1.25}, {"x":15.25, "y":1.25}, {"x":16.25, "y":1.25}, {"x":17.25, "y":1.25}, {"x":0, "y":2.25, "w":1.5}, {"x":1.5, "y":2.25}, {"x":2.5, "y":2.25}, {"x":3.5, "y":2.25}, {"x":4.5, "y":2.25}, {"x":5.5, "y":2.25}, {"x":6.5, "y":2.25}, {"x":7.5, "y":2.25}, {"x":8.5, "y":2.25}, {"x":9.5, "y":2.25}, {"x":10.5, "y":2.25}, {"x":11.5, "y":2.25}, {"x":12.5, "y":2.25}, {"x":13.5, "y":2.25, "w":1.5}, {"x":15.25, "y":2.25}, {"x":16.25, "y":2.25}, {"x":17.25, "y":2.25}, {"x":0, "y":3.25, "w":1.75}, {"x":1.75, "y":3.25}, {"x":2.75, "y":3.25}, {"x":3.75, "y":3.25}, {"x":4.75, "y":3.25}, {"x":5.75, "y":3.25}, {"x":6.75, "y":3.25}, {"x":7.75, "y":3.25}, {"x":8.75, "y":3.25}, {"x":9.75, "y":3.25}, {"x":10.75, "y":3.25}, {"x":11.75, "y":3.25}, {"x":12.75, "y":3.25, "w":2.25}, {"x":0, "y":4.25, "w":1.25}, {"x":1.25, "y":4.25}, {"x":2.25, "y":4.25}, {"x":3.25, "y":4.25}, {"x":4.25, "y":4.25}, {"x":5.25, "y":4.25}, {"x":6.25, "y":4.25}, {"x":7.25, "y":4.25}, {"x":8.25, "y":4.25}, {"x":9.25, "y":4.25}, {"x":10.25, "y":4.25}, {"x":11.25, "y":4.25}, {"x":12.25, "y":4.25, "w":1.75}, {"x":14, "y":4.25}, {"x":16.25, "y":4.25}, {"x":0, "y":5.25, "w":1.5}, {"x":1.5, "y":5.25}, {"x":2.5, "y":5.25, "w":1.5}, {"x":4, "y":5.25, "w":7}, {"x":11, "y":5.25, "w":1.5}, {"x":12.5, "y":5.25}, {"x":13.5, "y":5.25, "w":1.5}, {"x":15.25, "y":5.25}, {"x":16.25, "y":5.25}, {"x":17.25, "y":5.25}]
diff --git a/keyboards/hand88/rules.mk b/keyboards/hand88/rules.mk
index adc15fb5fc..266889cfe7 100755
--- a/keyboards/hand88/rules.mk
+++ b/keyboards/hand88/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = STM32F072
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
 # Do not put the microcontroller into power saving mode
 # when we get USB suspend event. We want it to keep updating
 # backlight effects.