diff options
Diffstat (limited to 'keyboards/gmmk/pro/readme.md')
| -rw-r--r-- | keyboards/gmmk/pro/readme.md | 37 |
1 files changed, 0 insertions, 37 deletions
diff --git a/keyboards/gmmk/pro/readme.md b/keyboards/gmmk/pro/readme.md deleted file mode 100644 index e291179c99..0000000000 --- a/keyboards/gmmk/pro/readme.md +++ /dev/null @@ -1,37 +0,0 @@ -# GMMK PRO - -A tenkeyless 75% keyboard made and sold by Glorious LLC. Equipped with the STM32 ARM Cortex-M4 microcontroller, with support for rotary encoders and three additional layouts. [More info at Glorious](https://www.pcgamingrace.com/products/glorious-gmmk-pro-75-barebone-black-reservation) - -* Keyboard Maintainer: [GloriousThrall](https://github.com/GloriousThrall) -* Hardware Supported: GMMK Pro -* Hardware Availability: [GloriousPCGaming.com](https://www.pcgamingrace.com/products/glorious-gmmk-pro-75-barebone-black-reservation) - -Make example for this keyboard (after setting up your build environment): - - make gmmk/pro:default - -Flashing example for this keyboard: - - make gmmk/pro:default:flash - -To reset the board into bootloader mode, do one of the following: - -* Hold the Reset switch mounted on the bottom side of the PCB while connecting the USB cable -* Hold the Escape key while connecting the USB cable (also erases persistent settings) -* Fn+Backslash will reset the board to bootloader mode if you have flashed the default QMK keymap - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - -## Case Screw Replacements - -Many users report stripped case screws when disassembling the board. - -The stock case screws are: -* Thread: M2 -* Thread length: ~5 mm -* Head diameter: ~3.8 mm -* Head counterbore diameter: ~4.0 mm -* Head counterbore depth: ~1.9 mm - -Most M2x5mm screws should fit fine, although it's best to ensure that the screw head will fit inside the counterbore. -For reference, [this hex socket head screw](https://www.mcmaster.com/91292A005/) from McMaster-Carr should fit nearly flush (head will protrude above the counterbore by ~0.1 mm). |