diff options
Diffstat (limited to 'keyboards/gmmk/gmmk2/p96/config.h')
| -rw-r--r-- | keyboards/gmmk/gmmk2/p96/config.h | 130 |
1 files changed, 130 insertions, 0 deletions
diff --git a/keyboards/gmmk/gmmk2/p96/config.h b/keyboards/gmmk/gmmk2/p96/config.h new file mode 100644 index 0000000000..1b3a92dd53 --- /dev/null +++ b/keyboards/gmmk/gmmk2/p96/config.h @@ -0,0 +1,130 @@ +/* Copyright 2021 Glorious, LLC <salman@pcgamingrace.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define DEVICE_VER 0x0001 +#define VENDOR_ID 0x320F +#define MANUFACTURER Glorious + +#define PRODUCT GMMK 2 96 + +/* key matrix size */ +#define MATRIX_ROWS 14 +#define MATRIX_COLS 8 + +#define MATRIX_ROW_PINS \ + { B0, B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, B11, B12, B13 } +#define MATRIX_COL_PINS \ + { A0, A1, A2, A3, A4, A8, A9, A10 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Hold ESC on start up to clear EEPROM and boot into bootloader mode */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 + +#define TAP_CODE_DELAY 10 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define RGB_DISABLE_WHEN_USB_SUSPENDED + +/* External spi flash */ +#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN B14 +#define WEAR_LEVELING_BACKING_SIZE 2048 + +/* SPI Config for LED Driver */ +#define SPI_DRIVER SPIDQ +#define SPI_SCK_PIN A5 +#define SPI_MOSI_PIN A7 +#define SPI_MISO_PIN A6 + +#define DRIVER_1_CS A15 +#define DRIVER_2_CS B15 +#define DRIVER_1_EN C13 +#define DRIVER_2_EN C13 + +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 66 +#define DRIVER_2_LED_TOTAL 54 +#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) + +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + + +/* Send up to 4 key press events per scan */ +#define QMK_KEYS_PER_SCAN 4 + +/* Set debounce time to 5ms */ +#define DEBOUNCE 5 + +/* Force NKRO on boot up regardless of the setting saved in the EEPROM (uncomment to enable it) */ +// #define FORCE_NKRO |