diff options
Diffstat (limited to 'keyboards/gh60')
| -rw-r--r-- | keyboards/gh60/gh60.h | 2 | ||||
| -rw-r--r-- | keyboards/gh60/keymaps/dbroqua/Makefile | 112 | ||||
| -rw-r--r-- | keyboards/gh60/keymaps/dbroqua/config.h | 187 | ||||
| -rw-r--r-- | keyboards/gh60/keymaps/dbroqua/keymap.c | 198 | ||||
| -rw-r--r-- | keyboards/gh60/keymaps/dbroqua_7U/Makefile | 111 | ||||
| -rw-r--r-- | keyboards/gh60/keymaps/dbroqua_7U/keymap.c | 88 | ||||
| -rw-r--r-- | keyboards/gh60/keymaps/robotmaxtron/config.h | 2 | ||||
| -rw-r--r-- | keyboards/gh60/keymaps/unxmaal/Makefile | 112 | ||||
| -rw-r--r-- | keyboards/gh60/keymaps/unxmaal/README.md | 20 | ||||
| -rw-r--r-- | keyboards/gh60/keymaps/unxmaal/WS2812-wiring.jpg | bin | 0 -> 1038926 bytes | |||
| -rw-r--r-- | keyboards/gh60/keymaps/unxmaal/config.h | 190 | ||||
| -rw-r--r-- | keyboards/gh60/keymaps/unxmaal/keymap.c | 228 | ||||
| -rw-r--r-- | keyboards/gh60/keymaps/xyverz/keymap.c | 149 |
13 files changed, 1397 insertions, 2 deletions
diff --git a/keyboards/gh60/gh60.h b/keyboards/gh60/gh60.h index 66bc2790d2..99ccf17574 100644 --- a/keyboards/gh60/gh60.h +++ b/keyboards/gh60/gh60.h @@ -72,4 +72,4 @@ inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); } { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D } \ } -#endif +#endif
\ No newline at end of file diff --git a/keyboards/gh60/keymaps/dbroqua/Makefile b/keyboards/gh60/keymaps/dbroqua/Makefile new file mode 100644 index 0000000000..f1644a8e49 --- /dev/null +++ b/keyboards/gh60/keymaps/dbroqua/Makefile @@ -0,0 +1,112 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif + diff --git a/keyboards/gh60/keymaps/dbroqua/config.h b/keyboards/gh60/keymaps/dbroqua/config.h new file mode 100644 index 0000000000..75ccec0973 --- /dev/null +++ b/keyboards/gh60/keymaps/dbroqua/config.h @@ -0,0 +1,187 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER geekhack +#define PRODUCT GH60 +#define DESCRIPTION t.m.k. keyboard firmware for GH60 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * RGB Underglow + * These settings are for the F4 by default: + * + * + * #define ws2812_PORTREG PORTF + * #define ws2812_DDRREG DDRF + * #define ws2812_pin PF4 + * #define RGBLED_NUM 14 // Number of LEDs + * #define RGBLIGHT_HUE_STEP 10 + * #define RGBLIGHT_SAT_STEP 17 + * #define RGBLIGHT_VAL_STEP 17 + * + * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. + * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. + * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c +*/ + +/* Deprecated code below +#define ws2812_PORTREG PORTF +#define ws2812_DDRREG DDRF +#define ws2812_pin PF4 +*/ +#define RGB_DI_PIN F4 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 11 // Number of LEDs +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif diff --git a/keyboards/gh60/keymaps/dbroqua/keymap.c b/keyboards/gh60/keymaps/dbroqua/keymap.c new file mode 100644 index 0000000000..be88edc090 --- /dev/null +++ b/keyboards/gh60/keymaps/dbroqua/keymap.c @@ -0,0 +1,198 @@ +#include "gh60.h" +#include "action_layer.h" +#include "rgblight.h" + +#define _DEFAULT 0 +#define _FN 1 +#define _WASD 2 +#define _SFX 3 + +//bool esc_led_on; + +enum planck_keycodes { + DEFAULT = SAFE_RANGE +}; + +// Fillers to make layering more clear +#define ______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Qwerty gui/alt/space/alt/gui + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + * |-----------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN | + * |-----------------------------------------------------------------------------------------+ + * |LGUI | LAlt | Space | RAlt |RGUI | + * `-----------------------------------------------------------------' + */ + [_DEFAULT] = KEYMAP_HHKB( /* Basic QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), \ + ______, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, ______, ______ \ + ), + +/* FN Layer + * ,-----------------------------------------------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | + * |-----------------------------------------------------------------------------------------+ + * | CAPS | | | | | | | | Psc | Slck| Paus| Up | | | + * |-----------------------------------------------------------------------------------------+ + * | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| | + * |-----------------------------------------------------------------------------------------+ + * | | Prev| Play| Next| | | + | - | End |PgDn| Down| | | + * |-----------------------------------------------------------------------------------------+ + * | | | | Stop | | + * `-----------------------------------------------------------------' + */ + [_FN] = KEYMAP_HHKB( /* Layer 1 */ + TG(_SFX),KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS, ______, ______, ______, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \ + ______, KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,______, \ + ______, KC_MPRV, KC_MPLY, KC_MNXT, ______, ______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, ______, ______, \ + ______, ______, ______, TG(_WASD), KC_MSTP, ______, ______, ______ \ + ), + +/* WASD Layer + * ,-----------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | | Up | | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | Left| Down|Right| | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | + * `-----------------------------------------------------------------' + */ + [_WASD] = KEYMAP_HHKB( /* Layer 2 */ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, KC_UP, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, KC_LEFT, KC_DOWN,KC_RGHT,______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______, \ + ______, ______, ______, ______, ______, ______, ______, ______ \ + ), + +/* SFX Layer + * ,-----------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | BL- | BL+ | BL | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | RGBT| RGBM| | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | Hue+| Hue-| Sat+| Sat-| Val+| Val-| | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | + * `-----------------------------------------------------------------' + */ + [_SFX] = KEYMAP_HHKB( + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, F(0), F(1), ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, F(2), F(3), F(4), F(5), F(6), F(7), ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, ______ \ + ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + return MACRO_NONE; +}; + +enum function_id { + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(RGBLED_TOGGLE), + [1] = ACTION_FUNCTION(RGBLED_STEP_MODE), + [2] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), + [3] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), + [4] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), + [5] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), + [6] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), + [7] = ACTION_FUNCTION(RGBLED_DECREASE_VAL) +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + case RGBLED_TOGGLE: + if (record->event.pressed) { + rgblight_toggle(); + } + break; + case RGBLED_INCREASE_HUE: + if (record->event.pressed) { + rgblight_increase_hue(); + } + break; + case RGBLED_DECREASE_HUE: + if (record->event.pressed) { + rgblight_decrease_hue(); + } + break; + case RGBLED_INCREASE_SAT: + if (record->event.pressed) { + rgblight_increase_sat(); + } + break; + case RGBLED_DECREASE_SAT: + if (record->event.pressed) { + rgblight_decrease_sat(); + } + break; + case RGBLED_INCREASE_VAL: + if (record->event.pressed) { + rgblight_increase_val(); + } + break; + case RGBLED_DECREASE_VAL: + if (record->event.pressed) { + rgblight_decrease_val(); + } + break; + case RGBLED_STEP_MODE: + if (record->event.pressed) { + rgblight_step(); + } + break; + } +} + +void matrix_scan_user(void) { + uint32_t layer = layer_state; + + if (layer & (1<<1)) { + gh60_fn_led_on(); + } else { + gh60_fn_led_off(); + } + + if (layer & (1<<2)) { + gh60_wasd_leds_on(); + } else { + gh60_wasd_leds_off(); + } + + if (layer & (1<<3)) { + gh60_esc_led_on(); + } else { + gh60_esc_led_off(); + } +};
\ No newline at end of file diff --git a/keyboards/gh60/keymaps/dbroqua_7U/Makefile b/keyboards/gh60/keymaps/dbroqua_7U/Makefile new file mode 100644 index 0000000000..da0f07d7d0 --- /dev/null +++ b/keyboards/gh60/keymaps/dbroqua_7U/Makefile @@ -0,0 +1,111 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable RGB Underglow + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/gh60/keymaps/dbroqua_7U/keymap.c b/keyboards/gh60/keymaps/dbroqua_7U/keymap.c new file mode 100644 index 0000000000..bebfe5af5d --- /dev/null +++ b/keyboards/gh60/keymaps/dbroqua_7U/keymap.c @@ -0,0 +1,88 @@ +#include "gh60.h" +#include "action_layer.h" + +#define _DEFAULT 0 +#define _FN 1 + +int esc_led = 0; + +// Fillers to make layering more clear +#define ______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Qwerty gui/alt/space/alt/gui + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + * |-----------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN | + * |-----------------------------------------------------------------------------------------+ + * |LGUI | LAlt | Space | RAlt |RGUI | + * `-----------------------------------------------------------------' + */ + [_DEFAULT] = KEYMAP_HHKB( /* Basic QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), \ + ______, KC_LGUI, KC_LALT, KC_SPC, ______, KC_RALT, KC_RGUI, ______ \ + ), + +/* FN Layer + * ,-----------------------------------------------------------------------------------------. + * | Led | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | + * |-----------------------------------------------------------------------------------------+ + * | CAPS | | | | | | | | Psc | Slck| Paus| Up | | | + * |-----------------------------------------------------------------------------------------+ + * | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| | + * |-----------------------------------------------------------------------------------------+ + * | | Prev| Play| Next| | | + | - | End |PgDn| Down| | | + * |-----------------------------------------------------------------------------------------+ + * | | | | Stop | | + * `-----------------------------------------------------------------' + */ + [_FN] = KEYMAP_HHKB( /* Layer 1 */ + F(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS, ______, ______, ______, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \ + ______, KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,______, \ + ______, KC_MPRV, KC_MPLY, KC_MNXT, ______, ______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, ______, ______, \ + ______, ______, ______, ______, ______, KC_MSTP, ______, ______ \ + ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + return MACRO_NONE; +}; + +enum function_id { + LED_TOGGLE +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(LED_TOGGLE) +}; + +void esc_led_toggle(void) { + if (esc_led == 0){ + esc_led = 1; + gh60_esc_led_on(); + } else { + esc_led = 0; + gh60_esc_led_off(); + } +} + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + case LED_TOGGLE: + if (record->event.pressed) { + esc_led_toggle(); + } + break; + } +}
\ No newline at end of file diff --git a/keyboards/gh60/keymaps/robotmaxtron/config.h b/keyboards/gh60/keymaps/robotmaxtron/config.h index 6a29e6b8c2..bcd7534617 100644 --- a/keyboards/gh60/keymaps/robotmaxtron/config.h +++ b/keyboards/gh60/keymaps/robotmaxtron/config.h @@ -182,7 +182,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define ws2812_pin PF4 */ #define RGB_DI_PIN F4 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 diff --git a/keyboards/gh60/keymaps/unxmaal/Makefile b/keyboards/gh60/keymaps/unxmaal/Makefile new file mode 100644 index 0000000000..c73cf11417 --- /dev/null +++ b/keyboards/gh60/keymaps/unxmaal/Makefile @@ -0,0 +1,112 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif + diff --git a/keyboards/gh60/keymaps/unxmaal/README.md b/keyboards/gh60/keymaps/unxmaal/README.md new file mode 100644 index 0000000000..52bf97ef4f --- /dev/null +++ b/keyboards/gh60/keymaps/unxmaal/README.md @@ -0,0 +1,20 @@ +Unxmaal's GH60 Layout +===================== +* Mostly stolen from /u/robotmaxtron + +##Quantum MK Firmware +For the full Quantum feature list, see the parent readme.md. + +* Standard Mac ANSI layout +* Spacebar acts as space when tapped, Fn when held +* Menu acts as menu when tapped, Fn2 when held +* Layer1: + * Top row = `~, F1-F12, Del + * JKIL = arrow cluster +* Layer2: + * Top row = media controls + * JKIL = PgDn/Up/Home/Insert + * Backspace = Reset + +### Additional Credits +Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards. diff --git a/keyboards/gh60/keymaps/unxmaal/WS2812-wiring.jpg b/keyboards/gh60/keymaps/unxmaal/WS2812-wiring.jpg Binary files differnew file mode 100644 index 0000000000..4ab8cc31ac --- /dev/null +++ b/keyboards/gh60/keymaps/unxmaal/WS2812-wiring.jpg diff --git a/keyboards/gh60/keymaps/unxmaal/config.h b/keyboards/gh60/keymaps/unxmaal/config.h new file mode 100644 index 0000000000..bb218d6fd4 --- /dev/null +++ b/keyboards/gh60/keymaps/unxmaal/config.h @@ -0,0 +1,190 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER geekhack +#define PRODUCT GH60 +#define DESCRIPTION t.m.k. keyboard firmware for GH60 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +// Rev A +// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 } +// Rev B/C +#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * RGB Underglow + * These settings are for the F4 by default: + * + * + * #define ws2812_PORTREG PORTF + * #define ws2812_DDRREG DDRF + * #define ws2812_pin PF4 + * #define RGBLED_NUM 14 // Number of LEDs + * #define RGBLIGHT_HUE_STEP 10 + * #define RGBLIGHT_SAT_STEP 17 + * #define RGBLIGHT_VAL_STEP 17 + * + * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. + * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. + * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c +*/ + +/* Deprecated code below +#define ws2812_PORTREG PORTF +#define ws2812_DDRREG DDRF +#define ws2812_pin PF4 +*/ +#define RGB_DI_PIN F4 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 8 // Number of LEDs +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif diff --git a/keyboards/gh60/keymaps/unxmaal/keymap.c b/keyboards/gh60/keymaps/unxmaal/keymap.c new file mode 100644 index 0000000000..7c9bd6a6d7 --- /dev/null +++ b/keyboards/gh60/keymaps/unxmaal/keymap.c @@ -0,0 +1,228 @@ +#include "gh60.h" +#include "action_layer.h" + +#define _BL 0 +#define _AL 1 +#define _FL 2 +#define _UL 3 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * ANSI Base, Mac style + * ,-----------------------------------------------------------------------------. + * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| = | Backsp | + * |-----------------------------------------------------------------------------| + * |Tab | Q | W | E | R | T | Y | U | I| O| P| [| ]| \| + * |-----------------------------------------------------------------------------| + * |Caps/Fn | A| S| D| F| G| H| J| K| L| ;| '| Enter | + * |-----------------------------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift | + * |-----------------------------------------------------------------------------| + * |Fn|Alt |Gui | Space(tapped), Fn(held) |Gui |Alt |Menu(tapped, Fn2(held)|Ctrl| + * `-----------------------------------------------------------------------------' + */ + [_BL] = KEYMAP( + KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSPC, \ + KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSLS, \ + KC_LCTL,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_NO,KC_ENT, \ + KC_LSFT,KC_NO,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_NO,KC_RSFT, \ + MO(1),KC_LALT,KC_LGUI, LT(1,KC_SPACE), KC_NO, KC_RGUI, KC_RALT, LT(2,KC_MENU), KC_RCTL), + + /* + * Pok3r style arrow cluster + * ,-----------------------------------------------------------. + * |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL | + * |-----------------------------------------------------------| + * | | | | | | | | |Up| | | | | | + * |-----------------------------------------------------------| + * | | | | | | | |Left|Down|Right| | | | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ + [_AL] = KEYMAP( + KC_GRV,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DELETE, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS), + + + /* + * Secondary function layer + * ,-------------------------------------------------------------. + * | | | | | | | | RW|Play|FF| Mute| Vol Down | Vol up |Reset | + * |-------------------------------------------------------------| + * | | | | | | | | | |PgUp| | | | | + * |-------------------------------------------------------------| + * | | | | | | | |Home|PgDown|End| | | | + * |-------------------------------------------------------------| + * | | | | | | | | | | | | | + * |-------------------------------------------------------------| + * | | | | | | | | | + * `-------------------------------------------------------------' + */ + [_FL] = KEYMAP( + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MPRV,KC_MPLY,KC_MNXT,KC_MUTE,KC_VOLD,KC_VOLU,RESET, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PGUP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_HOME,KC_TRNS,KC_HOME,KC_PGDN,KC_END,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS), + + /* + * Locking layer for controlling the underglow. + * NOTE: currently unused. + * + * ,-----------------------------------------------------------. + * | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | |On|Mode| | | | | | | | | | | + * |-----------------------------------------------------------| + * | | |Hue+|Hue-|Sat+|Sat-|Val+|Val-| | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ + [_UL] = KEYMAP( + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,F(4),F(5),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,F(6),F(7),F(8),F(9),F(10),F(11),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS), +}; + +enum function_id { + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL, + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(2), // Momentary Fn overlay + [1] = ACTION_LAYER_TOGGLE(1), // Toggle Arrow Layer overlay + [2] = ACTION_LAYER_TAP_KEY(2, KC_CAPS), // Tap to toggle caps lock and hold to activate function layer + [3] = ACTION_LAYER_TOGGLE(3), // Toggle Underglow Layer overlay + [4] = ACTION_FUNCTION(RGBLED_TOGGLE), //Turn on/off underglow + [5] = ACTION_FUNCTION(RGBLED_STEP_MODE), // Change underglow mode + [6] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), + [7] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), + [8] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), + [9] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), + [10] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), + [11] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), + [12] = ACTION_FUNCTION(SHIFT_ESC), + [13] = ACTION_LAYER_TAP_KEY(1, KC_SPACE), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +void matrix_scan_user(void) { + +// Layer LED indicators +// ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster + uint32_t layer = layer_state; + if (layer & (1<<1)) { + gh60_wasd_leds_on(); + } else { + gh60_wasd_leds_off(); + } + + if (layer & (1<<2)) { + gh60_esc_led_on(); + } else { + gh60_esc_led_off(); + } +}; + +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + case RGBLED_TOGGLE: + //led operations + if (record->event.pressed) { + rgblight_toggle(); + } + break; + case RGBLED_INCREASE_HUE: + if (record->event.pressed) { + rgblight_increase_hue(); + } + break; + case RGBLED_DECREASE_HUE: + if (record->event.pressed) { + rgblight_decrease_hue(); + } + break; + case RGBLED_INCREASE_SAT: + if (record->event.pressed) { + rgblight_increase_sat(); + } + break; + case RGBLED_DECREASE_SAT: + if (record->event.pressed) { + rgblight_decrease_sat(); + } + break; + case RGBLED_INCREASE_VAL: + if (record->event.pressed) { + rgblight_increase_val(); + } + break; + case RGBLED_DECREASE_VAL: + if (record->event.pressed) { + rgblight_decrease_val(); + } + break; + case RGBLED_STEP_MODE: + if (record->event.pressed) { + rgblight_step(); + } + break; + static uint8_t shift_esc_shift_mask; + // Shift + ESC = ~ + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +}; diff --git a/keyboards/gh60/keymaps/xyverz/keymap.c b/keyboards/gh60/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..e83a7f5a32 --- /dev/null +++ b/keyboards/gh60/keymaps/xyverz/keymap.c @@ -0,0 +1,149 @@ +#include "gh60.h" +#include "action_layer.h" +#include "eeconfig.h" + + +extern keymap_config_t keymap_config; + + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QW 0 +#define _DV 1 +#define _CM 2 +#define _FL 3 + +// Macro name shortcuts +#define QWERTY M(_QW) +#define DVORAK M(_DV) +#define COLEMAK M(_CM) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* + * _QW: Qwerty Layer + * ,-----------------------------------------------------------. + * |ESC | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Backsp| + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + * |-----------------------------------------------------------| + * |Fn | A| S| D| F| G| H| J| K| L| ;| '| Return| + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift| + * |-----------------------------------------------------------| + * |Ctrl|Alt |Gui | Space |Gui |Alt |Ctrl| Fn| + * `-----------------------------------------------------------' + */ +[_QW] = { /* Layer 0: Qwerty */ + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC}, + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS}, + {MO(_FL), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT }, + {KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, XXXXXXX, KC_RSFT}, + {KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL)} + }, + + /* + * _DV: Dvorak Layer + * ,-----------------------------------------------------------. + * |ESC | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| [| ]| Backsp| + * |-----------------------------------------------------------| + * |Tab | '| ,| .| P| Y| F| G| C| R| L| /| =| \| + * |-----------------------------------------------------------| + * |Fn | A| O| E| U| I| D| H| T| N| S| -| Return| + * |-----------------------------------------------------------| + * |Shift | ;| Q| J| K| X| B| M| W| V| Z| Shift| + * |-----------------------------------------------------------| + * |Ctrl|Alt |Gui | Space |Gui |Alt |Ctrl| Fn| + * `-----------------------------------------------------------' + */ +[_DV] = { /* Layer 1: Dvorak */ + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC}, + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS}, + {MO(_FL), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, XXXXXXX, KC_ENT }, + {KC_LSFT, XXXXXXX, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, XXXXXXX, KC_RSFT}, + {KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL)} + }, + + /* + * _CM: Colemak Layer + * ,-----------------------------------------------------------. + * |ESC | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Backsp| + * |-----------------------------------------------------------| + * |Tab | Q| W| F| P| G| J| L| U| Y| ;| [| ]| \| + * |-----------------------------------------------------------| + * |Fn | A| R| S| T| D| H| N| E| I| O| '| Return| + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| K| M| ,| .| /| Shift| + * |-----------------------------------------------------------| + * |Ctrl|Alt |Gui | Space |Gui |Alt |Ctrl| Fn| + * `-----------------------------------------------------------' + */ +[_CM] = { /* Layer 2: Colemak */ + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC}, + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS}, + {MO(_FL), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, XXXXXXX, KC_ENT }, + {KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, XXXXXXX, KC_RSFT}, + {KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL)} + }, + + /* + * _FL: Function Layer + * ,-----------------------------------------------------------. + * | |F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| Del| + * |-----------------------------------------------------------| + * | | | | | | | |PgU| Up|PgD|PSc|SLk|Pau| | + * |-----------------------------------------------------------| + * | | |MPr|MPl|MNx| |Hom| Lt| Dn| Rt| | | | + * |-----------------------------------------------------------| + * |CAPS | |Mut|VlD|VlU| |End| | | | | | + * |-----------------------------------------------------------| + * |_QW |_DV |_CM | | | | | | + * `-----------------------------------------------------------' + */ +[_FL] = { /* Layer 3: Functions */ + {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL }, + {_______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, _______}, + {_______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, XXXXXXX, _______}, + {KC_CAPS, XXXXXXX, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, KC_END, _______, _______, _______, _______, XXXXXXX, _______}, + {QWERTY, DVORAK, COLEMAK, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______} + }, + + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DV: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DV); + } + break; + case _QW: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QW); + } + break; + case _CM: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_CM); + } + break; + } + return MACRO_NONE; +}; |
