diff options
Diffstat (limited to 'keyboards/frosty_flake')
23 files changed, 0 insertions, 1204 deletions
diff --git a/keyboards/frosty_flake/config.h b/keyboards/frosty_flake/config.h deleted file mode 100644 index 2c73f10743..0000000000 --- a/keyboards/frosty_flake/config.h +++ /dev/null @@ -1,147 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Bathroom Epiphanies -#define PRODUCT frosty_flake -#define DESCRIPTION Frosty Flake controller for the CM Storm Quick Fire Rapid - -/* - * Frosty Flake Rev. 20140521 made by Bathroom Ephiphanies - * Ported from the Bathroom Epiphanies TMK Firmware: - * https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers - * - */ - -/* key matrix size */ -#define MATRIX_ROWS 8 // Row0 - Row7 in the schematic -#define MATRIX_COLS 18 // ColA - ColR in the schematic - -/* - * Keyboard Matrix Assignments - */ -#define UNUSED_PINS { B0, C4, D3 } - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/frosty_flake/frosty_flake.c b/keyboards/frosty_flake/frosty_flake.c deleted file mode 100644 index 1cd4760389..0000000000 --- a/keyboards/frosty_flake/frosty_flake.c +++ /dev/null @@ -1,63 +0,0 @@ -#include "frosty_flake.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - DDRB |= (1<<7); - DDRC |= (1<<5) | (1<<6); - - print_dec(usb_led); - - if (usb_led & (1<<USB_LED_CAPS_LOCK)) - PORTC &= ~(1<<5); - else - PORTC |= (1<<5); - - if (usb_led & (1<<USB_LED_NUM_LOCK)) - PORTB &= ~(1<<7); - else - PORTB |= (1<<7); - - if (usb_led & (1<<USB_LED_SCROLL_LOCK)) - PORTC &= ~(1<<6); - else - PORTC |= (1<<6); - - led_set_user(usb_led); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -__attribute__ ((weak)) -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -__attribute__ ((weak)) -void led_set_user(uint8_t usb_led) { -}
\ No newline at end of file diff --git a/keyboards/frosty_flake/frosty_flake.h b/keyboards/frosty_flake/frosty_flake.h deleted file mode 100644 index 953172a8b0..0000000000 --- a/keyboards/frosty_flake/frosty_flake.h +++ /dev/null @@ -1,106 +0,0 @@ -#ifndef FROSTY_FLAKE_H -#define FROSTY_FLAKE_H - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array - -/* - Matrix col/row mapping - - ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------. - | J6 | | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 | - `----' `-------------------' `-------------------' `-------------------' `--------------' - ,-------------------------------------------------------------------------. ,--------------. ,-------------------. - | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 | B2 | | L4 | O4 | Q4 | | K1 | L1 | Q1 | Q0 | - |-------------------------------------------------------------------------| |--------------| |-------------------| - | J2 | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 | B3 | | K4 | O7 | Q7 | | K5 | L5 | Q5 | O5 | - |-------------------------------------------------------------------------| '--------------' |-------------- | - | O5 | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 | B1 | | K2 | L2 | Q2 | | - |-------------------------------------------------------------------------| ,----. |-------------------| - | N2 | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 | N3 | | O6 | | K3 | L3 | Q3 | O3 | - |-------------------------------------------------------------------------| ,--------------. |-------------- | - | A4 | P2 | C6 | K6 | C0 | M3 | D0 | A1 | | O0 | K0 | L0 | | L6 | Q6 | | - `-------------------------------------------------------------------------' `--------------' `-------------------' -*/ -#define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{ \ -/* Columns and rows need to be swapped in the below definition */ \ -/* A B C D E F G H I J K L M N O P Q R */ \ -/* 0 */ { KC_NO, KB0, KC0, KD0, KC_NO, KF0, KG0, KC_NO, KC_NO, KC_NO, KK0, KL0, KC_NO, KC_NO, KO0, KC_NO, KQ0, KR0 }, \ -/* 1 */ { KA1, KB1, KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KK1, KL1, KC_NO, KC_NO, KC_NO, KC_NO, KQ1, KC_NO }, \ -/* 2 */ { KC_NO, KB2, KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KC_NO, KN2, KC_NO, KP2, KQ2, KR2 }, \ -/* 3 */ { KC_NO, KB3, KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KQ3, KR3 }, \ -/* 4 */ { KA4, KB4, KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KC_NO, KC_NO, KO4, KC_NO, KQ4, KR4 }, \ -/* 5 */ { KA5, KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KC_NO, KC_NO, KO5, KC_NO, KQ5, KR5 }, \ -/* 6 */ { KC_NO, KB6, KC6, KC_NO, KE6, KF6, KG6, KH6, KI6, KJ6, KK6, KL6, KC_NO, KC_NO, KO6, KC_NO, KQ6, KR6 }, \ -/* 7 */ { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7, KC_NO, KC_NO, KC_NO, KC_NO, KO7, KC_NO, KQ7, KR7 } \ -} - -/* - Matrix col/row mapping (TKL) - - ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------. - | J6 | | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 | - `----' `-------------------' `-------------------' `-------------------' `--------------' - ,-------------------------------------------------------------------------. ,--------------. - | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 | B2 | | L4 | O4 | Q4 | - |-------------------------------------------------------------------------| |--------------| - | J2 | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 | B3 | | K4 | O7 | Q7 | - |-------------------------------------------------------------------------| '--------------' - | O5 | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 | B1 | - |-------------------------------------------------------------------------| ,----. - | N2 | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 | N3 | | O6 | - |-------------------------------------------------------------------------| ,--------------. - | A4 | P2 | C6 | K6 | C0 | M3 | D0 | A1 | | O0 | K0 | L0 | - `-------------------------------------------------------------------------' `--------------' -*/ - -#define KEYMAP_TKL( \ - KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \ - KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, \ - KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, \ - KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, \ - KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, \ - KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0 \ -) \ -{ \ -/* Columns and rows need to be swapped in the below definition */ \ -/* A B C D E F G H I J K L M N O P Q R */ \ -/* 0 */ { KC_NO, KB0, KC0, KD0, KC_NO, KF0, KG0, KC_NO, KC_NO, KC_NO, KK0, KL0, KC_NO, KC_NO, KO0, KC_NO, KC_NO, KR0 }, \ -/* 1 */ { KA1, KB1, KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ -/* 2 */ { KC_NO, KB2, KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KC_NO, KC_NO, KC_NO, KN2, KC_NO, KP2, KC_NO, KR2 }, \ -/* 3 */ { KC_NO, KB3, KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KC_NO, KC_NO, KM3, KN3, KC_NO, KC_NO, KC_NO, KR3 }, \ -/* 4 */ { KA4, KB4, KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KC_NO, KC_NO, KO4, KC_NO, KQ4, KR4 }, \ -/* 5 */ { KA5, KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KR5 }, \ -/* 6 */ { KC_NO, KB6, KC6, KC_NO, KE6, KF6, KG6, KH6, KI6, KJ6, KK6, KC_NO, KC_NO, KC_NO, KO6, KC_NO, KC_NO, KR6 }, \ -/* 7 */ { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7, KC_NO, KC_NO, KC_NO, KC_NO, KO7, KC_NO, KQ7, KR7 } \ -} - -#define LAYOUT_tkl_ansi( \ - KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \ - KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, \ - KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, \ - KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, \ - KN2, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, \ - KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0 \ -) KEYMAP_TKL( \ - KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \ - KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, \ - KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, \ - KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, \ - KN2, KC_NO, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, \ - KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0 \ -) - -#endif diff --git a/keyboards/frosty_flake/keymaps/QFR_JM/config.h b/keyboards/frosty_flake/keymaps/QFR_JM/config.h deleted file mode 100644 index b25194014b..0000000000 --- a/keyboards/frosty_flake/keymaps/QFR_JM/config.h +++ /dev/null @@ -1,11 +0,0 @@ - -#define TAPPING_TERM 150 //reduce time required to register a held key - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif diff --git a/keyboards/frosty_flake/keymaps/QFR_JM/keymap.c b/keyboards/frosty_flake/keymaps/QFR_JM/keymap.c deleted file mode 100644 index 81899396af..0000000000 --- a/keyboards/frosty_flake/keymaps/QFR_JM/keymap.c +++ /dev/null @@ -1,132 +0,0 @@ -#include "frosty_flake.h" -#include "action_layer.h" -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif -#include "eeconfig.h" - -enum QFR_layers { - _COLEMAK, - _QWERTY, - _DVORAK, - _LOWER, - _MOUSE -}; - -enum QFR_keycodes { - COLEMAK = SAFE_RANGE, - QWERTY, - DVORAK, - LOWER, - MOUSE -}; - -enum custom_macros { - R_PIPE, - R_POINT -}; - - const uint16_t PROGMEM fn_actions[] = { //ACTION_LAYER_TAP_TOGGLE requires that number of taps be defined in *config.h* - default set to 5 - [0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC), //Hold for momentary Lower layer, Tap for Space, - [1] = ACTION_LAYER_MOMENTARY(_MOUSE) //Hold for momentary MOUSE - - }; - -#define SPC_LW FUNC(0) -#define MSE FUNC(1) -#define PIPE M(R_PIPE) -#define POINT M(R_POINT) - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_COLEMAK] = KEYMAP_TKL(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC,KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ - KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT , \ - KC_LSPO,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, KC_UP, \ - KC_LCTL,KC_LGUI, KC_LALT, SPC_LW, MSE, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT - ), - -[_QWERTY] = KEYMAP_TKL(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ - KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ - KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL,KC_LGUI,KC_LALT, SPC_LW, MSE, KC_RGUI , KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT - ), - -[_DVORAK] = KEYMAP_TKL(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ - KC_TAB, KC_QUOT,KC_COMM,KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ - KC_BSPC,KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_QUOT, KC_ENT, \ - KC_LSFT,KC_NUBS,KC_SCLN,KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_UP, \ - KC_LCTL,KC_LGUI,KC_LALT, SPC_LW, MSE, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT - ), - -[_LOWER] = KEYMAP_TKL(\ - RESET, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_MPRV, KC_MNXT, _______, KC_MUTE, KC_VOLD, KC_VOLU, QWERTY, COLEMAK,DVORAK, \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LBRC, KC_RBRC, KC_UNDS, KC_PLUS, KC_BSPC, _______,_______,_______, \ - KC_TAB, KC_PGUP, KC_HOME, KC_UP, KC_END, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LCBR, KC_RCBR, KC_PIPE, _______,_______,_______, \ - KC_CAPS, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, \ - _______,XXXXXXX,POINT,PIPE, KC_LCBR, KC_LBRC, KC_GRV, KC_PIPE, KC_RBRC, KC_RCBR, _______, _______, _______, _______, \ - _______, _______, _______, _______, KC_RALT, _______, _______, _______, _______,_______,_______ \ - ), - -[_MOUSE] = KEYMAP_TKL(\ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,_______,_______, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, _______,_______,_______, \ - KC_TAB, KC_WH_U, KC_WH_L, KC_MS_U, KC_WH_R, XXXXXXX, XXXXXXX, KC_BTN3, KC_BTN4, KC_BTN5, XXXXXXX, KC_LBRC, KC_RBRC, KC_BSLS, _______,_______,_______, \ - KC_BSPC, KC_WH_D, KC_MS_L, KC_MS_D, KC_MS_R, XXXXXXX, XXXXXXX, KC_BTN1, KC_BTN2, XXXXXXX, XXXXXXX, XXXXXXX, _______, \ - _______,XXXXXXX,PIPE,POINT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______, \ - _______, _______, _______, KC_ACL2, MSE, _______, _______, _______, _______,_______,_______ \ - ) -}; - -// Macros to send R pointer & dplyr pipe -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch(id) { - case R_POINT: - if (record->event.pressed) { // pointer - SEND_STRING("<- "); -// return MACRO(D(LSFT), T(COMM), U(LSFT), T(MINS), END); - } - break; - case R_PIPE: - if (record->event.pressed) { // dplyr pipe - SEND_STRING("%>% "); -// return MACRO(D(LSFT), T(5), T(DOT), T(5), U(LSFT), END); - } - break; - } - return MACRO_NONE; -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case COLEMAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_COLEMAK); - } - return false; - break; - case DVORAK: - if (record->event.pressed) { - set_single_persistent_default_layer(_DVORAK); - } - return false; - break; - } - return true; -}
\ No newline at end of file diff --git a/keyboards/frosty_flake/keymaps/QFR_JM/readme.md b/keyboards/frosty_flake/keymaps/QFR_JM/readme.md deleted file mode 100644 index f12a0ffba1..0000000000 --- a/keyboards/frosty_flake/keymaps/QFR_JM/readme.md +++ /dev/null @@ -1,86 +0,0 @@ - -# TKL keymap for frosty\_flake -``` -make frosty_flake:QFR_JM - -dfu-programmer atmega32u2 erase -dfu-programmer atmega32u2 flash frosty_flake_QFR_JM.hex -dfu-programmer atmega32u2 start -``` - -##Layers -``` - ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------. - |ESC | | F1 | F2 | F3 | F4 | | F5 | F6 | F7 | F8 | | F9 |F10 |F11 |F12 | |PrSc|ScLk|PsBk| - '----' '-------------------' '-------------------' '-------------------' '--------------' - ,-------------------------------------------------------------------------. ,--------------. - | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bspc | | Ins|Home|PgUp| - |-------------------------------------------------------------------------| |--------------| - | Tab | Q | W | F | P | G | J | L | U | Y | ; | [ | ] | \ | | Del|End |PgDn| - |-------------------------------------------------------------------------| '--------------' - | Bspc | A | R | S | T | D | H | N | E | I | O | ' | Enter | - |-------------------------------------------------------------------------| ,----. - | LSPO | Z | X | C | V | B | K | M | , | . | / | RSPC | | Up | - |-------------------------------------------------------------------------| ,--------------. - |Ctrl|LGUI|LAlt| Space/Lower |MSE |RGUI|Menu|Ctrl| |Left|Down|Rght| - '-------------------------------------------------------------------------' '--------------' - -``` -### Base Layer - Colemak -The base layout is Colemak by default, but this can be changed to QWERTY via the *LOWER* layer. -* I've implemented COLEMAK = SAFE\_RANGE when enumerating the custom\_keycodes, but I don't actually know what this does... - -* Space cadet is implemented in the shift keys (hold for shift, tap for respective parentheses) - -#### Layer Shifting -* The spacebar is a **TAP_KEY** macro - Hold for momentary *LOWER* layer, Tap for Space. -* The Right hand ALT key is a **TAP_TOGGLE** macro for the *MOUSE* layer (RAlt is accessible through LOWER, if you want...) - -### LOWER -``` - ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------. - |ESC | | F1 | F2 | F3 | F4 | |>/|||Stop| << | >> | | F9 |MUTE|Vol-|Vol+| |QWTY|CLMK|PsBk| - '----' '-------------------' '-------------------' '-------------------' '--------------' - ,-------------------------------------------------------------------------. ,--------------. - | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | _ | + | Bspc | | Ins|Home|PgUp| - |-------------------------------------------------------------------------| |--------------| - | Tab |PgUp|Home| Up | End| | | | | | | { | } | | | | Del|End |PgDn| - |-------------------------------------------------------------------------| '--------------' - | Bckspc|PgDn|Left|Down|Rght| | | | | | | ' | Enter | - |-------------------------------------------------------------------------| ,----. - | LSPO | <- |%>% | { | [ | ` | | | ] | } | . | / | RSPC | | Up | - |-------------------------------------------------------------------------| ,--------------. - |Ctrl|LGUI|LAlt| |RAlt|RGUI|Menu|Ctrl| |Left|Down|Rght| - '-------------------------------------------------------------------------' '--------------' -``` -The *LOWER* layer contains a navigation cluster on the left hand. This layer is momentary when the spacebar or LOWER (RAlt) key is held and toggled on/off when the LOWER key is tapped. - -* The Navigation cluster is offset to the right compared to the traditional **WASD** nav cluster. With this implementation, you don't need to move your hand from the home position when navigating. Page Up & Down keys are found on the far left of the cluster. - -* All unused (blank on the above keymap) keys are locked out using the XXXXXXX filler (KC\_NO), all modifiers (edge |\_| keys \[except 0, \. & Fn\] on the above keymap) and the ZXCV cluster are transparent (\_\_\_\_\_\_\_) to the Base layer. - -* The base layer can be switched to QWERTY or COLEMAK by pressing the Pause Break or Scroll Lock keys respectively - -### MOUSE -``` - ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------. - |ESC | | F1 | F2 | F3 | F4 | | F5 | F6 | F7 | F8 | | F9 |F10 |F11 |F12 | |PrSc|ScLk|PsBk| - '----' '-------------------' '-------------------' '-------------------' '--------------' - ,-------------------------------------------------------------------------. ,--------------. - | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Del | | Ins|Home|PgUp| - |-------------------------------------------------------------------------| |--------------| - | Tab | WhU| WhL| MsU| WhR| | | M3 | M4 | M5 | | [ | ] | \ | | Del|End |PgDn| - |-------------------------------------------------------------------------| '--------------' - | BSPC | WhD| MsL| MsD| MsR| | |LClk |RClk | | | ' | Enter | - |-------------------------------------------------------------------------| ,----. - | LSPO | Z | X | C | V | | | | , | . | / | RSPC | | Up | - |-------------------------------------------------------------------------| ,--------------. - |Ctrl|LGUI|LAlt| Accel ++ |MSE |RGUI|Menu|Ctrl| |Left|Down|Rght| - '-------------------------------------------------------------------------' '--------------' -``` -The *MOUSE* layer contains keys replicating functions found on the mouse. - -* The navigation cluster (Up, Down, Left, Right) is a replication of the Navigation cluster on the *LOWER* layer. The scroll keys are analagous to the Page Up & Downkeys. -* The primary click (right & left) buttons are on the right home row (index & middle fingers) -* Secondary click buttons are above the standard keys (M3/Wheel click, M4, M5) but I do not use this function. - diff --git a/keyboards/frosty_flake/keymaps/QFR_JM/rules.mk b/keyboards/frosty_flake/keymaps/QFR_JM/rules.mk deleted file mode 100644 index 0ae0b96462..0000000000 --- a/keyboards/frosty_flake/keymaps/QFR_JM/rules.mk +++ /dev/null @@ -1,17 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/frosty_flake/keymaps/default/config.h b/keyboards/frosty_flake/keymaps/default/config.h deleted file mode 100644 index 8893d122e0..0000000000 --- a/keyboards/frosty_flake/keymaps/default/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif diff --git a/keyboards/frosty_flake/keymaps/default/keymap.c b/keyboards/frosty_flake/keymaps/default/keymap.c deleted file mode 100644 index 4dc7ed655f..0000000000 --- a/keyboards/frosty_flake/keymaps/default/keymap.c +++ /dev/null @@ -1,11 +0,0 @@ -#include "frosty_flake.h" - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = KEYMAP(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \ - KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT) -};
\ No newline at end of file diff --git a/keyboards/frosty_flake/keymaps/default/readme.md b/keyboards/frosty_flake/keymaps/default/readme.md deleted file mode 100644 index 11bf4825ff..0000000000 --- a/keyboards/frosty_flake/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for frosty_flake diff --git a/keyboards/frosty_flake/keymaps/default/rules.mk b/keyboards/frosty_flake/keymaps/default/rules.mk deleted file mode 100644 index 9d3df5964f..0000000000 --- a/keyboards/frosty_flake/keymaps/default/rules.mk +++ /dev/null @@ -1,21 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif diff --git a/keyboards/frosty_flake/keymaps/nikchi/config.h b/keyboards/frosty_flake/keymaps/nikchi/config.h deleted file mode 100644 index 3f78526437..0000000000 --- a/keyboards/frosty_flake/keymaps/nikchi/config.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -#define TAPPING_TERM 200 -#define LEADER_TIMEOUT 800 - -#define DISABLE_SPACE_CADET_ROLLOVER - -#define UNICODE_TYPE_DELAY 0 - -#define LSPO_KEY KC_9 -#define RSPC_KEY KC_0 - -#define MOUSEKEY_INTERVAL 20 -#define MOUSEKEY_DELAY 0 -#define MOUSEKEY_TIME_TO_MAX 60 -#define MOUSEKEY_MAX_SPEED 7 -#define MOUSEKEY_WHEEL_DELAY 0 -// place overrides here - -#endif diff --git a/keyboards/frosty_flake/keymaps/nikchi/keymap.c b/keyboards/frosty_flake/keymaps/nikchi/keymap.c deleted file mode 100644 index bf7c5e5883..0000000000 --- a/keyboards/frosty_flake/keymaps/nikchi/keymap.c +++ /dev/null @@ -1,228 +0,0 @@ -#include "frosty_flake.h" -#include "action_layer.h" -#include "eeconfig.h" -#include "process_unicode.h" -#include "process_unicodemap.h" -#include "quantum.h" - -#define _______ KC_TRNS -#define MAXEMOJITAPS 80 - - -//declarations for tap dancing emojis -void register_hex32(uint32_t hex); -void cycleEmojis(qk_tap_dance_state_t *state, void *user_data); -void cycleAnimals(qk_tap_dance_state_t *state, void *user_data); -void cycleFoods(qk_tap_dance_state_t *state, void *user_data); -void cycleEtc(qk_tap_dance_state_t *state, void *user_data); -void cycleAll(qk_tap_dance_state_t *state, void *user_data); - -void tap(uint16_t keycode){ - register_code(keycode); - unregister_code(keycode); -}; - -//Tap Dance Declarations -enum taps{ - TD_CTCPS = 0, - EMOJIS, - ANIMAL, - HAND, - MEMES, - COPA, - ALLS -}; - -enum unicode_name { - EMOTIS = 1,//80, //1F60x - 1F64x - ANIMALS, //64, //1F40x - 1F43x - SYMBOLS,// = 45, //1F300 - 1F32C - FOODS,// = 87 , //1F32D - - ETC,// = 192, //1F44x -1F4Fx - VEHICLES,// = 83, //1F68x - 1F6Dx - SUPPLEMENT,// = 32, //1F91x-1F92x - ALCHEMY,// = 116 //1F70x - 1F773 - -}; - -enum my_macros { - NEWDESK = 0, - LEFTDESK, - RIGHTDESK, - CLOSEDESK -}; - - -// Tap Dance Definitions -qk_tap_dance_action_t tap_dance_actions[] = { - // Tap once for CTRL, twice for Caps Lock - [TD_CTCPS] = ACTION_TAP_DANCE_DOUBLE(KC_LCTL, KC_CAPS), - [COPA] = ACTION_TAP_DANCE_DOUBLE(LCTL(KC_C), LCTL(KC_V)), - [EMOJIS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleEmojis, NULL, NULL, 800), - [ANIMAL] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleAnimals, NULL, NULL, 800), - //[SYMBOLS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleSymbols, NULL, NULL, 800), - [FOODS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleFoods, NULL, NULL, 800), - [ETC] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleEtc, NULL, NULL, 800), - //[VEHICLES] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleVehicles, NULL, NULL, 800), - //[SUPPLEMENT] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleSupplement, NULL, NULL, 800), - [ALLS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleAll, NULL, NULL, 800) -// Other declarations would go here, separated by commas, if you have them -}; - -// macros -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch(id) { - case NEWDESK: // this would trigger when you hit a key mapped as M(0) - if (record->event.pressed) { - return MACRO( I(1), D(LGUI), D(LCTL), D(D), U(LGUI), U(LCTL), U(D), END ); // NEW DESKTOP - } - break; - case LEFTDESK: // this would trigger when you hit a key mapped as M(0) - if (record->event.pressed) { - return MACRO( I(1), D(LGUI), D(LCTL), D(LEFT), U(LGUI), U(LCTL), U(LEFT), END ); // LEFT DESKTOP - } - break; - case RIGHTDESK: // this would trigger when you hit a key mapped as M(0) - if (record->event.pressed) { - return MACRO( I(1), D(LGUI), D(LCTL), D(RGHT), U(LGUI), U(LCTL), U(RGHT), END ); // RIGHT DESKTOP - } - break; - case CLOSEDESK: // this would trigger when you hit a key mapped as M(0) - if (record->event.pressed) { - return MACRO( I(1), D(LGUI), D(LCTL), D(F4), U(LGUI), U(LCTL), U(F4), END ); // CLOSE DESKTOP - } - break; - } - return MACRO_NONE; -}; - - -// emojis in unicode -const uint32_t PROGMEM unicode_map[] = { - [EMOTIS] = 0x1F600, - [ANIMALS] = 0x1F400, - [SYMBOLS] = 0x1F300, - [FOODS] = 0x1F32D, - [ETC] = 0x1F440, - [VEHICLES] = 0x1F680, - [SUPPLEMENT] = 0x1F910, - [ALCHEMY] = 0x1F700 - }; -// Layouts -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = KEYMAP(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - KC_LSPO,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSPC, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \ - TD(TD_CTCPS),KC_LGUI,KC_LALT, KC_SPC, KC_LEAD,KC_RGUI, KC_APP,MO(1) , KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT), -[1] = KEYMAP(\ - TD(ALLS), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ - KC_GRV, TD(EMOJIS),TD(ANIMAL),TD(ETC),TD(FOODS), KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_MPRV,KC_MPLY,KC_MNXT, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ - KC_TAB, KC_Q, M(0), KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_UP ,KC_RBRC,KC_BSLS, KC_MUTE,KC_VOLD,KC_VOLU, KC_P7, KC_P8, KC_P9,KC_PPLS, \ - KC_LCTL, M(1), M(3), M(2), KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_LEFT,KC_RGHT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_DOWN, KC_RSFT, KC_MS_U, KC_P1, KC_P2, KC_P3,KC_PENT, \ - KC_BTN1,KC_BTN3,KC_BTN2, KC_SPC, KC_RALT,KC_RGUI, TG(2),_______ , KC_MS_L,KC_MS_D,KC_MS_R, KC_P0,KC_PDOT), -[2] = KEYMAP(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_MPRV,KC_MPLY,KC_MNXT, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_MUTE,KC_VOLD,KC_VOLU, KC_P7, KC_P8, KC_P9,KC_PPLS, \ - KC_LCTL, KC_D, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \ - KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_MS_U, KC_P1, KC_P2, KC_P3,KC_PENT, \ - KC_BTN1,KC_BTN3,KC_BTN2, KC_SPC, KC_RALT,KC_RGUI, TG(2) , KC_NO , KC_MS_L,KC_MS_D,KC_MS_R, KC_P0,KC_PDOT), -}; - -LEADER_EXTERNS(); - -void matrix_scan_user(void) { - LEADER_DICTIONARY() { - leading = false; - leader_end(); - - SEQ_TWO_KEYS(KC_A, KC_A) { // select all and copy - register_code(KC_LCTL); - tap(KC_A); - tap(KC_C); - unregister_code(KC_LCTL); - } - } -} - -void matrix_init_user(void) { - _delay_ms(500); - set_unicode_input_mode(UC_WINC); -}; - -void cycleAll(qk_tap_dance_state_t *state, void *user_data) { - if(state->count == 1) { - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[EMOTIS])); - unicode_input_finish(); - } - else if(state->count <= 1642) { - tap(KC_BSPC); - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[1])+state->count); - unicode_input_finish(); - } -}; - - -void cycleEmojis(qk_tap_dance_state_t *state, void *user_data) { - if(state->count == 1) { - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[EMOTIS])); - unicode_input_finish(); - } - else if(state->count <= 80) { - tap(KC_BSPC); - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[EMOTIS])+state->count); - unicode_input_finish(); - } -}; - -void cycleAnimals(qk_tap_dance_state_t *state, void *user_data) { - if(state->count == 1) { - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[ANIMALS])); - unicode_input_finish(); - } - else if(state->count <= MAXEMOJITAPS) { - tap(KC_BSPC); - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[ANIMALS])+state->count); - unicode_input_finish(); - } -}; - -void cycleFoods(qk_tap_dance_state_t *state, void *user_data) { - if(state->count == 1) { - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[FOODS])); - unicode_input_finish(); - } - else if(state->count <= 87) { - tap(KC_BSPC); - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[FOODS])+state->count); - unicode_input_finish(); - } -}; - - -void cycleEtc(qk_tap_dance_state_t *state, void *user_data) { - if(state->count == 1) { - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[ETC])); - unicode_input_finish(); - } - else if(state->count <= MAXEMOJITAPS) { - tap(KC_BSPC); - unicode_input_start(); - register_hex32(pgm_read_dword(&unicode_map[ETC])+state->count); - unicode_input_finish(); - } -}; - diff --git a/keyboards/frosty_flake/keymaps/nikchi/readme.md b/keyboards/frosty_flake/keymaps/nikchi/readme.md deleted file mode 100644 index 0b01f9dbf8..0000000000 --- a/keyboards/frosty_flake/keymaps/nikchi/readme.md +++ /dev/null @@ -1,24 +0,0 @@ -# The Nikchi's keymap for frosty_flake - -### FEATURING --SPACE CADET --Caps Lock is now LCTRL --LCTRL is Tap(LCTRL, Caps Lock) - -### LEADER KEY - RALT -COMBOS --a,a => Select All, Copy - - - -### FN REBINDS for Windows -``` - [W] [New Desktop] -[A][S][D] [Left Desk][Delete Desk][Right Desk] - -[Ins][Hom][PUp] [RW][PP][FF] -[Del][End][PDn] [MU][VD][VU] - -Arrows are Mouskeys, left three mods are clicks - -```
\ No newline at end of file diff --git a/keyboards/frosty_flake/keymaps/nikchi/rules.mk b/keyboards/frosty_flake/keymaps/nikchi/rules.mk deleted file mode 100644 index b21eb64044..0000000000 --- a/keyboards/frosty_flake/keymaps/nikchi/rules.mk +++ /dev/null @@ -1,24 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -UNICODEMAP_ENABLE = yes # unicodemap -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -TAP_DANCE_ENABLE = yes -LEADER_ENABLE = yes - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif diff --git a/keyboards/frosty_flake/keymaps/nikchi/variableTapDance.md b/keyboards/frosty_flake/keymaps/nikchi/variableTapDance.md deleted file mode 100644 index b2e5041393..0000000000 --- a/keyboards/frosty_flake/keymaps/nikchi/variableTapDance.md +++ /dev/null @@ -1,9 +0,0 @@ -# Tap Dancing to different beats. -Tap Dance is constrained normally by `TAPPING_TERM` defined in your keyboard's config.h This proves to be challenging to work with when sometimes you just need more time to tap out your dance, or even a different "beat". - - - -- `ACTION_TAP_DANCE_FN_ADVANCED_TIME(user_fn_on_each_tap, user_fn_on_dance_finished, user_fn_on_dance_reset, tap_specific_tapping_term)` : This works the same as `ACTION_TAP_DANCE_FN_ADVANCED` just with the extra `tap_specific_tapping_term` arguement at the end. This way you can set a specific tap dance to have a longer or shorter tap in between your taps, giving you more, or less, time in between each tap. - - -`tap_specific_tapping_term` should be the same type and range of values that one would put into the `TAPPING_TERM` definition in the config.h file. diff --git a/keyboards/frosty_flake/keymaps/tkl/config.h b/keyboards/frosty_flake/keymaps/tkl/config.h deleted file mode 100644 index 8893d122e0..0000000000 --- a/keyboards/frosty_flake/keymaps/tkl/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif diff --git a/keyboards/frosty_flake/keymaps/tkl/keymap.c b/keyboards/frosty_flake/keymaps/tkl/keymap.c deleted file mode 100644 index 99dc95627e..0000000000 --- a/keyboards/frosty_flake/keymaps/tkl/keymap.c +++ /dev/null @@ -1,11 +0,0 @@ -#include "frosty_flake.h" - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = KEYMAP_TKL(\ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ - KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ - KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ) -}; diff --git a/keyboards/frosty_flake/keymaps/tkl/readme.md b/keyboards/frosty_flake/keymaps/tkl/readme.md deleted file mode 100644 index a076a65de9..0000000000 --- a/keyboards/frosty_flake/keymaps/tkl/readme.md +++ /dev/null @@ -1 +0,0 @@ -# TKL keymap for frosty_flake diff --git a/keyboards/frosty_flake/keymaps/tkl/rules.mk b/keyboards/frosty_flake/keymaps/tkl/rules.mk deleted file mode 100644 index f29756f223..0000000000 --- a/keyboards/frosty_flake/keymaps/tkl/rules.mk +++ /dev/null @@ -1,17 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/frosty_flake/matrix.c b/keyboards/frosty_flake/matrix.c deleted file mode 100644 index cde7f63b95..0000000000 --- a/keyboards/frosty_flake/matrix.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - Copyright 2017 Gabriel Young <gabeplaysdrums@live.com> - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" - -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 -#endif -static uint8_t debouncing = DEBOUNCING_DELAY; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t scan_col(void) { - return ( - (PINC&(1<<7) ? 0 : ((matrix_row_t)1<<0)) | - (PINB&(1<<5) ? 0 : ((matrix_row_t)1<<1)) | - (PINB&(1<<4) ? 0 : ((matrix_row_t)1<<2)) | - (PINB&(1<<6) ? 0 : ((matrix_row_t)1<<3)) | - (PINB&(1<<1) ? 0 : ((matrix_row_t)1<<4)) | - (PINB&(1<<2) ? 0 : ((matrix_row_t)1<<5)) | - (PINB&(1<<3) ? 0 : ((matrix_row_t)1<<6)) | - (PINB&(1<<0) ? 0 : ((matrix_row_t)1<<7)) - ); -} - -static void select_col(uint8_t col) { - switch (col) { - case 0: PORTD = (PORTD & ~0b01111011) | 0b00011011; break; - case 1: PORTD = (PORTD & ~0b01111011) | 0b01000011; break; - case 2: PORTD = (PORTD & ~0b01111011) | 0b01101010; break; - case 3: PORTD = (PORTD & ~0b01111011) | 0b01111001; break; - case 4: PORTD = (PORTD & ~0b01111011) | 0b01100010; break; - case 5: PORTD = (PORTD & ~0b01111011) | 0b01110001; break; - case 6: PORTD = (PORTD & ~0b01111011) | 0b01100001; break; - case 7: PORTD = (PORTD & ~0b01111011) | 0b01110000; break; - case 8: PORTD = (PORTD & ~0b01111011) | 0b01100000; break; - case 9: PORTD = (PORTD & ~0b01111011) | 0b01101000; break; - case 10: PORTD = (PORTD & ~0b01111011) | 0b00101011; break; - case 11: PORTD = (PORTD & ~0b01111011) | 0b00110011; break; - case 12: PORTD = (PORTD & ~0b01111011) | 0b00100011; break; - case 13: PORTD = (PORTD & ~0b01111011) | 0b01111000; break; - case 14: PORTD = (PORTD & ~0b01111011) | 0b00010011; break; - case 15: PORTD = (PORTD & ~0b01111011) | 0b01101001; break; - case 16: PORTD = (PORTD & ~0b01111011) | 0b00001011; break; - case 17: PORTD = (PORTD & ~0b01111011) | 0b00111011; break; - } -} - -void matrix_init(void) { - /* Row output pins */ - DDRD |= 0b01111011; - /* Column input pins */ - DDRC &= ~0b10000000; - DDRB &= ~0b01111111; - PORTC |= 0b10000000; - PORTB |= 0b01111111; - - for (uint8_t i=0; i < MATRIX_ROWS; i++) - matrix[i] = matrix_debouncing[i] = 0; - - matrix_init_quantum(); -} - -uint8_t matrix_scan(void) { - for (uint8_t col = 0; col < MATRIX_COLS; col++) { - select_col(col); - _delay_us(3); - matrix_row_t col_scan = scan_col(); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col); - bool curr_bit = col_scan & (1<<row); - if (prev_bit != curr_bit) { - matrix_debouncing[row] ^= ((matrix_row_t)1<<col); - debouncing = DEBOUNCING_DELAY; - } - } - } - - if (debouncing) { - if (--debouncing) - _delay_ms(1); - else - for (uint8_t i = 0; i < MATRIX_ROWS; i++) - matrix[i] = matrix_debouncing[i]; - } - - matrix_scan_quantum(); - return 1; -} - -inline matrix_row_t matrix_get_row(uint8_t row) { - return matrix[row]; -} - -void matrix_print(void) { -#ifndef NO_PRINT - print("\nr\\c ABCDEFGHIJKLMNOPQR\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - matrix_row_t matrix_row = matrix_get_row(row); - xprintf("%02X: ", row); - for (uint8_t col = 0; col < MATRIX_COLS; col++) { - bool curr_bit = matrix_row & (1<<col); - xprintf("%c", curr_bit ? '*' : '.'); - } - print("\n"); - } -#endif -} - -uint8_t matrix_key_count(void) { - uint8_t count = 0; - for (uint8_t row = 0; row < MATRIX_ROWS; row++) - count += bitpop32(matrix[row]); - return count; -} diff --git a/keyboards/frosty_flake/readme.md b/keyboards/frosty_flake/readme.md deleted file mode 100644 index 822377a719..0000000000 --- a/keyboards/frosty_flake/readme.md +++ /dev/null @@ -1,46 +0,0 @@ -# Frosty Flake Controller - -This is the firmware for Rev. 20140521 of the Frosty Flake controller -by [Bathroom Epiphanies](http://bathroomepiphanies.com/controllers/), -a replacement controller for the [Cooler Master Quick Fire -Rapid](http://www.coolermaster.com/peripheral/keyboards/quickfirerapid/). - -The code was adapted from the [BathroomEpiphanies TMK -Firmware](https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers), -but has been cleaned up to match the -[schematic](https://deskthority.net/wiki/File:Frosty_Flake_Schematics.pdf) -and gone through some minor refactoring for QMK. - -## 104 and 87 layout support - -Support for both 104 key and 87 key layouts is provided. See the -keymaps `default` (104) and `tkl` (87) for example layouts. - -Keyboard Maintainer: QMK Community -Hardware Supported: Frosty Flake -Hardware Availability: https://1upkeyboards.com/qfr-frosty-flake-controller.html - -Make example for this keyboard (after setting up your build environment): - -104 key default layout: - -``` -make frosty_flake:default -``` - -To directly flash the frosty_flake after compiling use - -``` -make frosty_flake:default:dfu -``` - -87 key tkl layout: - -``` -make frosty_flake:tkl:dfu -``` - -See [build environment -setup](https://docs.qmk.fm/build_environment_setup.html) then the -[make instructions](https://docs.qmk.fm/make_instructions.html) for -more information. diff --git a/keyboards/frosty_flake/rules.mk b/keyboards/frosty_flake/rules.mk deleted file mode 100644 index 94619e03d1..0000000000 --- a/keyboards/frosty_flake/rules.mk +++ /dev/null @@ -1,73 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u2 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE = no # MIDI controls -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches - -CUSTOM_MATRIX = yes -SRC += matrix.c - -LAYOUTS = tkl_ansi |