3 files changed, 2 insertions, 38 deletions
diff --git a/keyboards/fjlabs/swordfish/config.h b/keyboards/fjlabs/swordfish/config.h
index 0a0f66f275..0940cefc5e 100644
--- a/keyboards/fjlabs/swordfish/config.h
+++ b/keyboards/fjlabs/swordfish/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
 
 /*
  * Keyboard Matrix Assignments
@@ -41,12 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -71,27 +60,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/swordfish/info.json b/keyboards/fjlabs/swordfish/info.json
index bdb2e3a2c3..4d9bffdf2f 100644
--- a/keyboards/fjlabs/swordfish/info.json
+++ b/keyboards/fjlabs/swordfish/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0024",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_alice_all": {
             "layout": [{"x":18.33, "y":0.142}, {"x":2.37, "y":0.27}, {"x":3.37, "y":0.27}, {"x":14.13, "y":0.27}, {"x":15.13, "y":0.27}, {"x":17.13, "y":0.27}, {"x":16.13, "y":0.27}, {"x":18.45, "y":1.142}, {"x":2.24, "y":1.28, "w":1.5}, {"x":3.74, "y":1.28}, {"x":13.75, "y":1.28}, {"x":14.75, "y":1.28}, {"x":15.75, "y":1.28}, {"x":16.75, "y":1.28, "w":1.5}, {"x":18.61, "y":2.142}, {"x":2.1, "y":2.28, "w":1.75}, {"x":3.85, "y":2.28}, {"x":14.16, "y":2.28}, {"x":15.16, "y":2.28}, {"x":16.16, "y":2.28, "w":2.25}, {"x":1.95, "y":3.28, "w":2.25}, {"x":4.2, "y":3.28}, {"x":13.81, "y":3.28}, {"x":14.81, "y":3.28}, {"x":15.81, "y":3.28, "w":1.75}, {"x":17.77, "y":3.48}, {"x":1.95, "y":4.28, "w":1.25}, {"x":3.2, "y":4.28, "w":1.25}, {"x":14.06, "y":4.28, "w":1.25}, {"x":15.31, "y":4.28, "w":1.25}, {"x":16.77, "y":4.475}, {"x":17.77, "y":4.475}, {"x":18.77, "y":4.475}, {"x":0, "y":5.28}, {"x":1, "y":5.28}, {"x":2, "y":5.28}, {"x":3, "y":5.28}, {"x":4, "y":5.28}, {"x":0.5, "y":6.28}, {"x":1.5, "y":6.28}, {"x":2.5, "y":6.28}, {"x":3.5, "y":6.28}, {"x":0.75, "y":7.28}, {"x":1.75, "y":7.28}, {"x":2.75, "y":7.28}, {"x":3.75, "y":7.28}, {"x":1.25, "y":8.28}, {"x":2.25, "y":8.28}, {"x":3.25, "y":8.28}, {"x":4.25, "y":8.28}, {"x":1.25, "y":9.28, "w":1.25}, {"x":2.5, "y":9.28, "w":2.75}, {"x":-4.5, "y":10.08}, {"x":-3.5, "y":10.08}, {"x":-2.5, "y":10.08}, {"x":-1.5, "y":10.08}, {"x":-5.0, "y":11.08}, {"x":-4, "y":11.08}, {"x":-3.0, "y":11.08}, {"x":-2, "y":11.08}, {"x":-4.75, "y":12.08}, {"x":-3.75, "y":12.08}, {"x":-2.75, "y":12.08}, {"x":-1.75, "y":12.08}, {"x":-5.25, "y":13.08}, {"x":-4.25, "y":13.08}, {"x":-3.25, "y":13.08}, {"x":-2.25, "y":13.08}, {"x":-5.25, "y":14.08, "w":2.25}, {"x":-3.0, "y":14.08, "w":1.25}]
diff --git a/keyboards/fjlabs/swordfish/rules.mk b/keyboards/fjlabs/swordfish/rules.mk
index 82e9a04fa5..8bb5a64bff 100644
--- a/keyboards/fjlabs/swordfish/rules.mk
+++ b/keyboards/fjlabs/swordfish/rules.mk
@@ -1,12 +1,6 @@
-# MCU name
-MCU = atmega32u4
-
 # Processor frequency
 F_CPU = 8000000
 
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #