3 files changed, 2 insertions, 34 deletions
diff --git a/keyboards/fjlabs/peaker/config.h b/keyboards/fjlabs/peaker/config.h
index f9f1886143..5e8f2bd5e7 100644
--- a/keyboards/fjlabs/peaker/config.h
+++ b/keyboards/fjlabs/peaker/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -41,12 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -55,27 +48,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/peaker/info.json b/keyboards/fjlabs/peaker/info.json
index 92e622725c..fc4bb596f7 100644
--- a/keyboards/fjlabs/peaker/info.json
+++ b/keyboards/fjlabs/peaker/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0020",
         "device_version": "0.0.1"
     },
+    "processor": "at90usb646",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_tkl_all": {
             "layout": [
diff --git a/keyboards/fjlabs/peaker/rules.mk b/keyboards/fjlabs/peaker/rules.mk
index aed2d80b8b..f117516ecc 100644
--- a/keyboards/fjlabs/peaker/rules.mk
+++ b/keyboards/fjlabs/peaker/rules.mk
@@ -1,12 +1,6 @@
-# MCU name
-MCU = at90usb646
-
 # Processor frequency
 F_CPU = 8000000
 
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #