3 files changed, 5 insertions, 41 deletions
diff --git a/keyboards/fjlabs/midway60/config.h b/keyboards/fjlabs/midway60/config.h
index d218cb7022..29edca2dd9 100644
--- a/keyboards/fjlabs/midway60/config.h
+++ b/keyboards/fjlabs/midway60/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
 
 /*
  * Keyboard Matrix Assignments
@@ -41,44 +36,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* Define Indicator LED's */
-#define LED_CAPS_LOCK_PIN C7
-
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/midway60/info.json b/keyboards/fjlabs/midway60/info.json
index 885b74cc5b..de55690bfc 100644
--- a/keyboards/fjlabs/midway60/info.json
+++ b/keyboards/fjlabs/midway60/info.json
@@ -8,6 +8,11 @@
         "pid": "0x1002",
         "device_version": "0.0.1"
     },
+    "indicators": {
+        "caps_lock": "C7"
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_all": {
             "layout": [
diff --git a/keyboards/fjlabs/midway60/rules.mk b/keyboards/fjlabs/midway60/rules.mk
index 67f00abb1e..f117516ecc 100644
--- a/keyboards/fjlabs/midway60/rules.mk
+++ b/keyboards/fjlabs/midway60/rules.mk
@@ -1,12 +1,6 @@
-# MCU name
-MCU = atmega32u4
-
 # Processor frequency
 F_CPU = 8000000
 
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #