3 files changed, 13 insertions, 81 deletions
diff --git a/keyboards/evyd13/mx5160/config.h b/keyboards/evyd13/mx5160/config.h
index b280c14149..408d12cb69 100644
--- a/keyboards/evyd13/mx5160/config.h
+++ b/keyboards/evyd13/mx5160/config.h
@@ -16,11 +16,6 @@
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 10
 
 /*
  * Keyboard Matrix Assignments
@@ -38,77 +33,11 @@
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION ROW2COL
 
-// For QMK DFU
-#define QMK_ESC_OUTPUT C6
-#define QMK_ESC_INPUT D1
-#define QMK_LED B1
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-#define LED_NUM_LOCK_PIN B2
-#define LED_CAPS_LOCK_PIN B1
-#define LED_SCROLL_LOCK_PIN B3
-#define LED_PIN_ON_STATE 0
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 16
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-//   /*==== use exp() and sin() ====*/
-//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -124,7 +53,3 @@
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/evyd13/mx5160/info.json b/keyboards/evyd13/mx5160/info.json
index c1d7068048..4436aefb8f 100644
--- a/keyboards/evyd13/mx5160/info.json
+++ b/keyboards/evyd13/mx5160/info.json
@@ -8,6 +8,19 @@
         "pid": "0x5160",
         "device_version": "0.0.1"
     },
+    "qmk_lufa_bootloader": {
+        "esc_input": "D1",
+        "esc_output": "C6",
+        "led": "B1"
+    },
+    "indicators": {
+        "caps_lock": "B1",
+        "num_lock": "B2",
+        "scroll_lock": "B3",
+        "on_state": 0
+    },
+    "processor": "atmega32u4",
+    "bootloader": "qmk-dfu",
     "layouts": {
         "LAYOUT_all": {
             "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":14.5, "y":0}, {"x":15.5, "y":0}, {"x":16.5, "y":0}, {"x":18, "y":0}, {"x":19, "y":0}, {"x":20, "y":0}, {"x":21, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2.5, "y":1, "w":1.5}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":15, "y":1}, {"x":16, "y":1, "w":1.5}, {"x":18, "y":1}, {"x":19, "y":1}, {"x":20, "y":1}, {"x":21, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2.5, "y":2, "w":1.75}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2}, {"x":11.25, "y":2}, {"x":12.25, "y":2}, {"x":13.25, "y":2}, {"x":14.25, "y":2}, {"x":15.25, "y":2}, {"x":16.25, "y":2, "w":1.25}, {"x":18, "y":2}, {"x":19, "y":2}, {"x":20, "y":2}, {"x":21, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2.5, "y":3, "w":1.25}, {"x":3.75, "y":3}, {"x":4.75, "y":3}, {"x":5.75, "y":3}, {"x":6.75, "y":3}, {"x":7.75, "y":3}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3}, {"x":12.75, "y":3}, {"x":13.75, "y":3}, {"x":14.75, "y":3, "w":1.75}, {"x":16.5, "y":3}, {"x":18, "y":3}, {"x":19, "y":3}, {"x":20, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":5, "y":4, "w":1.5}, {"x":6.5, "y":4, "w":7}, {"x":13.5, "y":4, "w":1.5}, {"x":16, "y":4, "w":1.5}, {"x":18, "y":4}, {"x":19, "y":4}, {"x":20, "y":4}, {"x":21, "y":3, "h":2}]
diff --git a/keyboards/evyd13/mx5160/rules.mk b/keyboards/evyd13/mx5160/rules.mk
index 9603d89f82..1ffb0c55b9 100644
--- a/keyboards/evyd13/mx5160/rules.mk
+++ b/keyboards/evyd13/mx5160/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = qmk-dfu
-
 # Build Options
 #   change yes to no to disable
 #